Related
Has anyonebeen able to connect successfully an hard drive to TP?
I've tried by all manners without success,even with the docking ... no luck.
Would thisbe possible if we root TP?
for your usb drive to be mounted by the thinkpad, it has to be formatted in fat32. not fat or ntfs.
Ive got 2 hard drives (1terabyte and 500GB) with loads of data on them and are both formatted ntfs. I connected them to my thinkpad, they powered up but did not mount. I wasn't ready to reformat my hard drives with data on them so i didn't try.
However, I think I've got a 2GB usb stick lying around somewhere . I'll format it to fat32 and post some feedback here later.
oh and before trying, go to settings-->storage and enable usb storage devices. otherwise no device would mount on the tablet. even when formatted properly
as darkhandsome18 mentioned, yes but the harddrive has to be formatted in Fat32. Windows XP, Vista, and 7 don't allow you to format harddrives over 32GB within windows. However, you can use a thirdparty utility to format drives that are over 32GB in size to Fat32.
i personally use Fat32formatter (its commandline based) to do this w/my drives.
http://www.softpedia.com/get/System/Hard-Disk-Utils/FAT32format.shtml
i did verify that my 1TB external usb harddrive did mount on the TPT, i have not tried to run any videos or music from it though.
darkhandsome18 said:
for your usb drive to be mounted by the thinkpad, it has to be formatted in fat32. not fat or ntfs.
Ive got 2 hard drives (1terabyte and 500GB) with loads of data on them and are both formatted ntfs. I connected them to my thinkpad, they powered up but did not mount. I wasn't ready to reformat my hard drives with data on them so i didn't try.
However, I think I've got a 2GB usb stick lying around somewhere . I'll format it to fat32 and post some feedback here later.
oh and before trying, go to settings-->storage and enable usb storage devices. otherwise no device would mount on the tablet. even when formatted properly
Click to expand...
Click to collapse
i have tried 4 ext HDD (ntfs and fat32), and all of them is not working.... (except for draining my battery for powering the HDD.. )
but for usb flash drive, that is a different matter, is it easily recognized by my TPT..
there is 1 unique problem that occurred to me, while trying to copy files from/into my TPT, there's a notification that file copy is successful, but when i check the file, it's size is 0 bytes..
this has happened to me 3-4 times, unfortunately, i dont know where's the "glitch" is coming from, as i can't replicate the problem anymore (i haven't got any update at all)
I have 2 different 500gb 2,5" drives. My samsung drive works fine playing music on the TPT. The WD drive I have only works sometimes strangly enough.
Normally when I use playback from hdd I use my supercharger power which connects throught the docking port or else the TPT just gets sucked dry of power as the hdd draws almost 500mA's.
External Drives
zeb crs said:
I have 2 different 500gb 2,5" drives. My samsung drive works fine playing music on the TPT. The WD drive I have only works sometimes strangly enough.
Normally when I use playback from hdd I use my supercharger power which connects throught the docking port or else the TPT just gets sucked dry of power as the hdd draws almost 500mA's.
Click to expand...
Click to collapse
If your external drive is formatted at fat32 and has its own power source, you will have success using it with the TPT. But if you are depending on the tablet's USB port to supply enough power to spin the disks in the external hard drive, you will get varying results, depending on the power requirements for your external drive. USB flash drives work fine because they have no moving parts and a low power requirement. As zeb crs stated, you see a huge power drain on your tablet when trying to use an external hard drive without its own power source.
have anyone tried to insert a san disk SDXC 64G SD card into the tablet?
flss01001 said:
have anyone tried to insert a san disk SDXC 64G SD card into the tablet?
Click to expand...
Click to collapse
XC is not supported . just HC
Skateddy from the Lenovo forums got a Komputerbay 64GB SDXC Class 10 card to work properly: http://forums.lenovo.com/t5/ThinkPad-slate-tablets/Max-SD-size/td-p/524571
Moved to Thinkpad General
No questions in the development section please. Once sorted out feel free to post a [Tutorial] thread. That can go in the dev section.
Take it easy
O_G
Just to share that yesterday, after waiting +/- more than 1m, my TPT has recognize an external 1TB HD formated in FAT32
Good news for travelers, right?!
Update 2
Drive Mount
https://play.google.com/store/search?q=drive+mount&c=apps
For those who have root this app even mounts nfts!
Hope you find this use full.
Cheers,
Paulo
heya...
Not sure if this is the right place to list this, but....
I found a tool that formats any drive larger than 32gb to fat32.
With it I formatted a 1TB hdd in an external, self powered enclosure and connected it to the tablet.
Holy crap it worked like a charm
The tool is called FAT32 Format...google it its free
Yeah. I was pleased to see the USB 3.0 hard drive charger cable port.
Nice find......that really opens up the possibilities.....with a hard drive that stores the stuff on my mac....I can actually use the pro as my main device. I have a 500GB laying on the shelf to play with.
Can you confirm that any pics would show in the gallery?
You can do this from diskpart too (built in Windows tool). Use the FS=FAT32 option.
http://blog.powerbiz.net.au/fixes/using-diskpart-to-create-a-bootable-usb-of-windows-8/
I seem to remember some of the later Samsung devices have exFAT support. It does not have the max 4GB size per file limitation associated with FAT32.
Not sure about the Note Pro though
Sent from my GT-N7000 using Tapatalk
Can you give some more details. I want to connect a powered 3.0 hub to my 12.2 with an osg to 3.0 usb adapter so that I can use an external (non powered) hdd. I'd also like to try an external dvd drive.
Thanks
I used an OTG cable and plugged in my 500 MB external to it, no problem, no formatting. Do some need to be formatted to work?
So I just ordered my shield, remote, and micro sd. I'm really curious as to if I made a good combination of hardware. I picked up the 16gb version, nvidia remote, and the new fastest sandisk Mico sd. Here's my questions.
-I got the brand new sandisk uhs-ii u3 micro sd, I know the bus speed for micro SD on the shield is only rated uhs-1. Can I format it as adoptable storage using the USB 3.0 adapter so I can get the high speed the card is rated for or will I have to use the micro SD slot for adoptable storage and have my card speed throttled to the slower r/w bus speed. If this is the case should I have opted for a uhs-1 card for half the price
-I also have a USB 3.0 4TB external hard drive full of movies that I currently plug into my LG TV. It is formatted NTFS, will I be able to plug it into my shield and use it as my new media player since the one on my TV is kinda clunky. Can I read and write to NTFS on my shield?
- I also have an Samsung 840pro 250GB SSD in a USB 3.0 enclosure which is formatted exfat. Could this drive be used as adoptable storage via USB 3.0? Pretty much the same as question 1. Can adoptable storage be configured threw USB instead of micro SD, if this is the case do I really need the Micro SD card?
- Will a USB 3.0 hub work on the shield so I can plug in a dongle for a wireless keyboard, my 4TB drive, my SSD, and Micro SD in 3.0 adapter?
- Are the gaming controllers and remote Bluetooth or do they also require a USB receiver.
- Will rooting and installation of custom recovery and rom enable some of the features above that can't be achieved stock?
My needs for the device will be for gaming and playing my local video files and some kodi, so I would like enough storage to install many games. All of my large video files will be stored on my 4TB external. I was hoping to have all my games installed on device threw adoptable storage but would like to get the high speed from my SD card to run games
All answers and suggestions welcomed.
Should I have just opted for the 500GB pro shield?
Here's what I ordered
-also can I use a Xbox or Dualshock 4 controller instead of the included Nvidia one?
AndroiderM said:
So I just ordered my shield, remote, and micro sd. I'm really curious as to if I made a good combination of hardware. I picked up the 16gb version, nvidia remote, and the new fastest sandisk Mico sd. Here's my questions.
-I got the brand new sandisk uhs-ii u3 micro sd, I know the bus speed for micro SD on the shield is only rated uhs-1. Can I format it as adoptable storage using the USB 3.0 adapter so I can get the high speed the card is rated for or will I have to use the micro SD slot for adoptable storage and have my card speed throttled to the slower r/w bus speed. If this is the case should I have opted for a uhs-1 card for half the price
-I also have a USB 3.0 4TB external hard drive full of movies that I currently plug into my LG TV. It is formatted NTFS, will I be able to plug it into my shield and use it as my new media player since the one on my TV is kinda clunky. Can I read and write to NTFS on my shield?
- I also have an Samsung 840pro 250GB SSD in a USB 3.0 enclosure which is formatted exfat. Could this drive be used as adoptable storage via USB 3.0? Pretty much the same as question 1. Can adoptable storage be configured threw USB instead of micro SD, if this is the case do I really need the Micro SD card?
- Will a USB 3.0 hub work on the shield so I can plug in a dongle for a wireless keyboard, my 4TB drive, my SSD, and Micro SD in 3.0 adapter?
- Are the gaming controllers and remote Bluetooth or do they also require a USB receiver.
- Will rooting and installation of custom recovery and rom enable some of the features above that can't be achieved stock?
My needs for the device will be for gaming and playing my local video files and some kodi, so I would like enough storage to install many games. All of my large video files will be stored on my 4TB external. I was hoping to have all my games installed on device threw adoptable storage but would like to get the high speed from my SD card to run games
All answers and suggestions welcomed.
Should I have just opted for the 500GB pro shield?
Here's what I ordered
-also can I use a Xbox or Dualshock 4 controller instead of the included Nvidia one?
Click to expand...
Click to collapse
Can anyone help with some of these questions? I canceled the 16gb version and opted for the pro. I also canceled the sandisk micro sd. Can I use my Samsung ssd in usb 3.0 enclosure as adoptable storage? Would I benefit any from it as far as load times on games or should I just install to internal 500gb drive? What are the advantages of a custom rom over rooted stock rom. With stock rooted rom can I install all the same apps from Google play or will I have more options with a custom rom? Also I see custom roms of full android 6.0 without nvidia skin overlay. Are there any real benefits this and will I lose any functionality? Any help is appreciated, responses please! I get my shield Tuesday.
Look through the forum and most of your questions will be answered, also, should have stuck with the 16gb
AndroiderM said:
So I just ordered my shield, remote, and micro sd. I'm really curious as to if I made a good combination of hardware. I picked up the 16gb version, nvidia remote, and the new fastest sandisk Mico sd. Here's my questions.
-I got the brand new sandisk uhs-ii u3 micro sd, I know the bus speed for micro SD on the shield is only rated uhs-1. Can I format it as adoptable storage using the USB 3.0 adapter so I can get the high speed the card is rated for or will I have to use the micro SD slot for adoptable storage and have my card speed throttled to the slower r/w bus speed. If this is the case should I have opted for a uhs-1 card for half the price
-I also have a USB 3.0 4TB external hard drive full of movies that I currently plug into my LG TV. It is formatted NTFS, will I be able to plug it into my shield and use it as my new media player since the one on my TV is kinda clunky. Can I read and write to NTFS on my shield?
- I also have an Samsung 840pro 250GB SSD in a USB 3.0 enclosure which is formatted exfat. Could this drive be used as adoptable storage via USB 3.0? Pretty much the same as question 1. Can adoptable storage be configured threw USB instead of micro SD, if this is the case do I really need the Micro SD card?
- Will a USB 3.0 hub work on the shield so I can plug in a dongle for a wireless keyboard, my 4TB drive, my SSD, and Micro SD in 3.0 adapter?
- Are the gaming controllers and remote Bluetooth or do they also require a USB receiver.
- Will rooting and installation of custom recovery and rom enable some of the features above that can't be achieved stock?
My needs for the device will be for gaming and playing my local video files and some kodi, so I would like enough storage to install many games. All of my large video files will be stored on my 4TB external. I was hoping to have all my games installed on device threw adoptable storage but would like to get the high speed from my SD card to run games
All answers and suggestions welcomed.
Should I have just opted for the 500GB pro shield?
Here's what I ordered
-also can I use a Xbox or Dualshock 4 controller instead of the included Nvidia one?
Click to expand...
Click to collapse
techjunky90 said:
Look through the forum and most of your questions will be answered, also, should have stuck with the 16gb
Click to expand...
Click to collapse
Yeah ended up swapping for 16gb again and gonna use my Samsung ssd adopted. Found the answers to most questions just trying to decide rather to flash full android m or just root factory firmware.
Why not the 500gb with adoptable though. Isn't it a hybrid drive or just a regular 5400rpm hdd
AndroiderM said:
Why not the 500gb with adoptable though. Isn't it a hybrid drive or just a regular 5400rpm hdd
Click to expand...
Click to collapse
I think the drive is a Hybrid. Pretty good chance that NVIDIA just used a USB 3.0 to SATA chip to service that 500gb drive. So I see no reason why you couldn't have just done it yourself.
How do you know the device did not come with the remote already? I purchased the 16gb and decided I did not want the remote so I didn't buy it, yet surprisingly it was in the retail box anyway.
As far as I know it's just the shield and the controller in the box according to the Amazon description and pictures. They do sell a bundle that has the remote included but I'm pretty confident mine has no remote. You cannot add, change, or remove storage internally on the shield nvidia made sure of that.
Weather to Pro or not to Pro, you can find some more opinions here: http://forum.xda-developers.com/shield-tv/help/buying-16gb-128gb-sdcard-500gb-t3399659
It all comes down to what you want to use the Shield for. If your installed games are not going to exceed those 16GB of flash (which of course will be less) I see no reason to get the Pro. Another valid point is the price difference: for the 100€ difference, I could get a 2-4 TB HDD.
On another note, I think you can find more answers around here: https://forums.geforce.com/default/board/159/shield-android-tv/
Yeah I was talking about getting a bigger usb 3.0 drive and using one of the included usb 3.0 ports. That's actually why they are there.
SkOrPn said:
Yeah I was talking about getting a bigger usb 3.0 drive and using one of the included usb 3.0 ports. That's actually why they are there.
Click to expand...
Click to collapse
Gotcha I plan on it, I have a 256gb ssd in enclosure I want to use as adopted storage and a 4tb wd external for media storage
Personally speaking, for my family anyway I just add drives to the home server, or retire them for bigger ones. Building a Windows home server 5 years ago was the best thing I ever did for media consumption. Sadly I only have 3 SATA ports so I am limited to the amount of drives I can add
Sent from my SM-T700 using Tapatalk
One thing I forgot to mention: adding USB devices through a USB port will limit the speed and latency at which they are accessed.
OK how would you guys setup this is what I now have ordered and has already shipped so no going back. Idc if I use adoptable storage or not unless it benefits me. My usage will be downloading large torrent files and copying them to 4tb drive using shield as player, lots of large file gaming, kodi, Internet browsing and that's about it. Maybe hangouts
What I ordered:
Shield pro 500gb
Remote
Controllers
Bluetooth keyboard
Whatever I already have:
Samsung 256gb ssd
4tb wd my book
500gb hdd out of ps4
I wouldn't worry about adaptable storage. keep your external drives mounted as removable storage and have your apps and games all installed on your internal drive, keep the external drives just for media. I can't see you filling up 500gb with android apps and games any time soon.
Mr Creosote said:
I wouldn't worry about adaptable storage. keep your external drives mounted as removable storage and have your apps and games all installed on your internal drive, keep the external drives just for media. I can't see you filling up 500gb with android apps and games any time soon.
Click to expand...
Click to collapse
Edit: I think I've got it figured out just gonna root stock rom and sideload whatever I can't get directly through playstore.
So I have inserted the 3.0 usb mini drive and get message usb is running slow should try 3.0 or drive needs to be formatted. I format the drive and it fails then everything gets messed up at that point. es file explorer sees it but says can not open file. In the geforce forums many people are having the same issue. I plug in a usb 2.0 thumb drive and it detects and es file explorer sees it fine. Me thinks an update is needed. Any ideas?
thx
What type are you using?
I have a 128gb sandisk usb stick as adopoted storage in slot 1, in slot 2 I now have usb 3 Verbatim 1gb external drive.
Tried several others as I tweaked my setup and all worked (sandisk, verbatim , samsung)
Having the same problem. I've tried two different USB sticks. Both 128gb up to 400mbps read and 270mbps write. Shield claims both are too slow and fails to format either. Once it fails, the sticks are rendered useless and even after formatting, the shield will not mount either stick.. Nvidia support was not helpful at all. They're going to email me back when they find a solution.
Are they all USB 3? I read it doesn't support less than this so in case you have USB 2 sticks this may be the issue.
If they are USB 3 then I am not sure.
USB 2.0 drive work fine. I have already tested a couple. I got a 64GB 3.0 SanDisk to work. I did not bother formatting when aked. It came formatted in Fat 32.
I have used both USB 2 and 3; most USB 2.0 flash drives has given me a slow warning error, but the USB 3.0 one rocked and adopted just fine.
Same issue here. Just got my 2017, plugged in a sandisk fit 128, and it doesn't detect it. Plugged in some crappy 8gb lexar drive I had and it detects it. Tried formatting the sandisk multiple times, ntfs and exfat and still nothing.
That's very strange, I have the same as you and it worked in both usb slots on the Shield when I was testing what I would like my setup to be before eventually using it as adopted storage in slot 1.
How are you guys formatting your drives, maybe this is the issue? Having said that my 1tb HD in 2nd USB slot is NTFS.
I tried both exFat and NTFS.
Here's what i tried.
Sandisk Ultra Fit 128 USB 3.0 (both NTFS & exFat) - didn't recognize under either format
Lexar 8GB crappy old drive USB 2.0 (FAT32) - recognized
PNY 64GB (not sure of model) USB 2.0 (both NTFS & exFAT) - Didn't recognize as exFAT, but did recognize it as NTFS
Seagate 250GB 2.5" portable drive USB 2.0 (NTFS) - recognized
I've ordered the samsung bar drive (plastic) 128GB to try that now. I can't use the USB 2.0 drives, it's noticeably slower.
Same issue here with 2nd gen shield TV and USB 3.0 Samsung FIT 128 GB USB drive.
After formatting the drive as extended storage it is showing "Samsung drive is ejected" message.
tried formatting using Fat32, NTFS and exFat with no success, also changed the the drive policy to optimize performance then formatted, no success either.
This is becoming a frustrating issue.
Any solution please?
There is an update in the works that corrects most of these issues with USB drives. If you check this thread https://forums.geforce.com/default/...the-next-shield-experience-software-upgrade-/ then you will figure out what I am reffering too.
Bump? I just gave up on my Samsung Bar 128GB (USB 3.0) drive. It seems to work in other devices without any issues. It would occasionally be detected after while in USB port 2, but the format never succeeded. I tried formatting it myself using exFAT and NTFS, and then tried deleting all partitions and still had no luck. Stuck a SanDisk 32GB drive in there and it worked right away for adopted storage.
I just got my Nvidia shield tv 2017 16gb and discovered that the usb port closest to the ethernet port does not recognize usb flash drives. First I tried to use a 128gb sandisk flash drive on that port and it took forever to format so I canceled the process. Then tried over the other port and it took seconds to finish.
I think the problem is related to the OP has there been any breakthrough?
In actuality the port works for connecting a dongle for a keyboard or mouse, but flash drives are a no go. Additionally, the drives connected to that port get blazing hot.
Plug in your hard drive then unplug the Nvidia system plug it back and let it power on
Froid said:
Having the same problem. I've tried two different USB sticks. Both 128gb up to 400mbps read and 270mbps write. Shield claims both are too slow and fails to format either. Once it fails, the sticks are rendered useless and even after formatting, the shield will not mount either stick.. Nvidia support was not helpful at all. They're going to email me back when they find a solution.
Click to expand...
Click to collapse
Any new?
I have the same issue.
Thanks
sicilianom said:
Any new?
I have the same issue.
Thanks
Click to expand...
Click to collapse
I ended up purchasing a 2TB Western Digital My Passport external drive and it worked right away and haven't had an issue with it since. It's been great, but unfortunately, the original issue was never fixed as far as I know. I've taken a couple updates since, but haven't tried any other sticks since the WD Drive is working so well. If you're on the latest update and still having an issue, then I recommend an external drive.
Sent from my Pixel XL using Tapatalk
Thank you for the info.
How did you setup the heater all drive?
How did you managed to install all apps and games and not filling up the Internal 16GB memory?
Thanks
---------- Post added at 11:22 AM ---------- Previous post was at 11:21 AM ----------
Froid said:
I ended up purchasing a 2TB Western Digital My Passport external drive and it worked right away and haven't had an issue with it since. It's been great, but unfortunately, the original issue was never fixed as far as I know. I've taken a couple updates since, but haven't tried any other sticks since the WD Drive is working so well. If you're on the latest update and still having an issue, then I recommend an external drive.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Thank you for the info.
How did you setup the heater all drive?
How did you managed to install all apps and games and not filling up the Internal 16GB memory?
Thanks
I have a WD 4tb my passport external hard drive that has been giving problems with the shield tv ever since i bought. I bought it specifically for the shield as an internal storage device. ill format it as internal storage, a few days later, it cant recognize the HDD. when I go on kodi it says "waiting for external storage". it happens all the time. I thought if i power down the shield instead of sleep mode it would fix it, nope problems still there. can anyone help me. i dont want to buy a desktop external hdd because im not going to have use for this hdd after i paid for it already.
Any particular reason as to why you want to format it to be Internal?
Dont know what you're using to plug it in but try with another enclosure, cable and if using a usb hub in between then try pluging the hdd directly to the shield TV and make sure it receive the proper power to work. I've also read that the Shield tv has some issues handling with more than one partition in external hdd's.
4TB should work but google search for users that report success with 4tb+ HDD, I've seen up to 3tb around.
If still you can't make it work stable then contact nvidia support and create a thread at geforce forum.
Enviado desde mi Moto X via Tapatalk!
Hrm funny enough, my Nvidia Shield TV has killed 2 external hard drives now in this exact same situation... Both older mechanical hdds... I'm running a sector by sector scan on the most recent drive now...
I had the same problem, until finally my data got corrupted. I suspect the Shield didn't have the ability to consistently power the drive and other usb devices. Even using a powered hub.
I've since switched to a WD desktop external drive with its own AC adapter. I haven't had any issues in the month since I've done so.
In my case, I needed to format as internal storage to run a Plex DVR. It won't work as external storage.