Related
i recently upgraded my router to a netgear nighthawk, only to find out openvpn does not work with android.
I was using a netgear ddwrt before with pptp and it worked just fine... other than flashing ddwrt to my night hawk is there a way to make the openvpn work with stock firmware.??
OpenVPN
Hi,
Open VPN does work in Android but not with stock software. You have to use an app like OpenVPN for Android (search for it on the Google Play). I use it to connect home through Tomato firmware on a Netgear router. Works flawlessly. You have to notice that only TUN mode is working on Android.
Regards,
gmag11
calc said:
i recently upgraded my router to a netgear nighthawk, only to find out openvpn does not work with android.
I was using a netgear ddwrt before with pptp and it worked just fine... other than flashing ddwrt to my night hawk is there a way to make the openvpn work with stock firmware.??
Click to expand...
Click to collapse
Not sure what you're talking about "stock'"... but openVPN app does NOT work.
The open vpn on the nighthawk is TAP based, android only supports TUN. This is the whole purpose of my post. Perhaps i should have made that more clear. Any nighthawk owners want to chime in?
With "stock" I mean default Android VPN service.
It it possible to use TAP on Android but there is some (expert) work to do. It is not easy, at least I've tried several times on my SGSII with CM11 without success. The default on Android (and recommended for remote access) is TUN. With TAP routing is easier but it generates more traffic as it is a layer 2 protocol and all broadcast messages (such as ARP) will flow throug VPN.
Here in XDA you can find some info about configuring TAP. But there is not much threads because it is recommended to use TUN.
I'm using a NetGear WNR3500Lv2 router with TOMATO firmware, what is far better than NetGear firmware. You can try it. Search "Tomato by Shibby" on Google to see if you router is supported.
Regards
calc said:
Not sure what you're talking about "stock'"... but openVPN app does NOT work.
The open vpn on the nighthawk is TAP based, android only supports TUN. This is the whole purpose of my post. Perhaps i should have made that more clear. Any nighthawk owners want to chime in?
Click to expand...
Click to collapse
Is there a WiFi, firewall, vpn, router with tap and tun support that i can purchse.
Sent from my HTC One using xda app-developers app
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
I am looking for a one box solution. Need it for a few remote offices.
Sent from my HTC One using xda app-developers app
Looking at the Cisco tv220w. Any thoughts
Sent from my HTC One using xda app-developers app
working solution, maybe
calc said:
i recently upgraded my router to a netgear nighthawk, only to find out openvpn does not work with android.
I was using a netgear ddwrt before with pptp and it worked just fine... other than flashing ddwrt to my night hawk is there a way to make the openvpn work with stock firmware.??
Click to expand...
Click to collapse
The comments for this Android app are saying that it works with the nighthawk.
I am a noob to this forum and cannot put in url's, but the name is 'OpenVPN Client'
Nighthawk VPN on Android
Yes, you can use the OpenVPN client to connect to a Netgear Nighthawk, but you have to use the paid version of the client. The free version does not support TAP. Use the Windows configuration files generated by the Nighthawk and copy them to your Android device. Then import them in to OpenVPN. I had seen somewhere that there is a parameter that should be changed, but without changing anything it mostly worked on my Galaxy S4 running Lollypop.
One thing I did notice is that I seem to be running in some kind of split tunnel mode where traffic for my home network works over the VPN, but anything for the Internet does not go through my home network. I'd like to figure that out so when I'm traveling, I know I'm secure through whatever open network I may be on.
-Brian
Hi,
I was setting up this phone for my brother. Was surprised to see no root, roms, or unlocking as this is a really nice phone for the price.
I'm not a super gung ho android dev, but I have some reverse engineering experience so I'm gonna see if I can make some shellcode run on an apk or library with root perms and get a root shell running. No promises.
Anyway: If you want tethering, the Power Toggles app will turn on the hotspot without checking to see if you have hotspot account permissions on Boost. Set it up in the More Settings part of Android's Settings, it is the built-in Android tethering code.
Hi sorry for my English, can you explain what is the power toogle app is,thanks
Sent from my 306SH using XDA Free mobile app
[email protected] said:
Hi sorry for my English, can you explain what is the power toogle app is,thanks
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.painless.pc&hl=en
How I used that for thetering, can you explain me
Sent from my 306SH using XDA Free mobile app
Try the last sentence of my first post
I'm interested in executing shell commands in a apk.
If you have some info you can share that would be great.
I tried it. Didn't seem to work. It kept acting like it was toggling 4g the whole time
Sent from my 306SH using XDA Free mobile app
no one has yet passed restricting boost mobile tethering of the crystal
Sent from my 306SH using XDA Free mobile app
[email protected] said:
no one has yet passed restricting boost mobile tethering of the crystal
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
You can use Power Toggles, or if hot spot is all you want you can use HotSpot Toggle. You have to add them as widgets.
Way people keep giving a options without testing first that work, the thetering not work on boost mobile
Sent from my 306SH using XDA Free mobile app
On 305SH, if you setup "Nova" Launcher and you create a shortcut, you select "Activities" and go in the list and select "Settings", and Inside "Thetering & Hotspot" :
You will have a menu to allow you tethering Bluetooth or Wifi.
It works great with 305SH (I tryed bluetooth).
Yes, with some programs tethering is active but teams are not conecting to the internet, is blockage for the operator in the case of 306 is boost mobile or sprint, someone will know how to disable this block
Sent from my 306SH using XDA Free mobile app
myspac said:
On 305SH, if you setup "Nova" Launcher and you create a shortcut, you select "Activities" and go in the list and select "Settings", and Inside "Thetering & Hotspot" :
You will have a menu to allow you tethering Bluetooth or Wifi.
It works great with 305SH (I tryed bluetooth).
Click to expand...
Click to collapse
This didn't actually work for me. i had two "Tethering & Hotspot" options within settings but they both came up with the subscribe menu. the power toggles method however, did work.
Yes, I think we need Root access for that
Sent from my 306SH using XDA Free mobile app
foxfi works
Paid app called foxfi works for WiFi/USB tethering. Bluetooth tethering untested. Runs around $5 has a trail version with data caps for tethering. PDA net reqired on PC for USB tethering. No root required.
---------- Post added at 02:01 AM ---------- Previous post was at 01:53 AM ----------
I use my aquos as a WiFi dongle for my laptop router>(WiFi)>aquos>(USB thether)>PC
I've used it spairingly as a WiFi hotspot so if boost sends you messages quarrying into how your using hotspot and why your not paying for it and any possible consequences that may occur is on you, I'm not responsible.
---------- Post added at 02:35 AM ---------- Previous post was at 02:01 AM ----------
Would also like to clarify 306sh on boost mobile. Only tested on that network (obviously that model). So results may vary. Just use the Fofxi sprint app, you purchase a key to unlock paid version for regular and sprint I.e. one time buy for both versions on 1 google account=possible no root solution to free hotspot on multiple devices down the road . (I'm assuming it works with sprints but they charge overages so unless your somehow still grandfathered in to an unlimited plan I'd recommend against it) that works with boost, Straighttalk (Walmarts Tracphone plan), and virgin mobile, that I've tested, but is a hit or miss on phone models, so far only phone I've seen it work on KitKat so yay sharp for not caring about blocking app permission to hotspot toggle, don't update you might lose feature from app and have to wait till root.
Another's person can confirm that with boost Mobile and how I can do
Sent from my Nexus 7 using XDA Free mobile app
Tried this before I saw this thread. Got the app because I didn't realize it would be such a pain in the ass to access toggles from a phone interface compared to my Nexus 7. Anyway, set it all up, input everything correctly and ... No internet access via the hotspot. Doesn't work.
306SH on Boost
I.FIGURED SINCE I FIGURED OUT A SORT OF TETHER ID POST HERE..
On phone must download pdanet
And on tablet pdanet tablet.
Use Bluetooth option and it works.speed test on my tablet was only at about .5mbps but satisfactory for browsing.
Sent from my 306SH using XDA Free mobile app
hazridi said:
Hi,
I was setting up this phone for my brother. Was surprised to see no root, roms, or unlocking as this is a really nice phone for the price.
I'm not a super gung ho android dev, but I have some reverse engineering experience so I'm gonna see if I can make some shellcode run on an apk or library with root perms and get a root shell running. No promises.
Anyway: If you want tethering, the Power Toggles app will turn on the hotspot without checking to see if you have hotspot account permissions on Boost. Set it up in the More Settings part of Android's Settings, it is the built-in Android tethering code.
Click to expand...
Click to collapse
Is that a free app and does it work after latest update, foxfi (part of pdanet) works as well. My guess is the same reason but is a paid app so this seems much more promising since its free. Someone was saying it wasn't working for them but its worked fine for me, but I have yet to get the new update that came out (only update so far), does yours work after update, if so IMA update and test my luck with foxfi. Either way thanks for the heads up. And yes I was a little shocked at the lack of development for this phone as well, sharps got it on lock down.
(x_x)Zombie said:
Is that a free app and does it work after latest update, foxfi (part of pdanet) works as well. My guess is the same reason but is a paid app so this seems much more promising since its free. Someone was saying it wasn't working for them but its worked fine for me, but I have yet to get the new update that came out (only update so far), does yours work after update, if so IMA update and test my luck with foxfi. Either way thanks for the heads up. And yes I was a little shocked at the lack of development for this phone as well, sharps got it on lock down.
Click to expand...
Click to collapse
Hi, I don't know what version of sw you have, but my said SW version SA 300, and the kernel 3.4.0, and I try everything but nothing happens.
Sent from my 306SH using XDA Free mobile app
Is there a hotspot hack for the 10 yet?
Check out bad boys rom
Sent from my 2PS64 using Tapatalk
I'm looking for a stock Rom with hotspot unlocked or a tether app that works. Ideas?
Scrufdog said:
I'm looking for a stock Rom with hotspot unlocked or a tether app that works. Ideas?
Click to expand...
Click to collapse
I could put something together if u want to test, this would be a flashable add-on after flashing one of the stock rooted already posted...
OMJ said:
I could put something together if u want to test, this would be a flashable add-on after flashing one of the stock rooted already posted...
*edit* see attatched
Click to expand...
Click to collapse
I'd be interested in a hotspot flashable add-on as well. At least until GPS is up and running on BB rom. Thanks OMJ
OMJ said:
I could put something together if u want to test, this would be a flashable add-on after flashing one of the stock rooted already posted...
*edit* see attatched
Click to expand...
Click to collapse
10 downloads, no responses?
Sent from my unknown using XDA Labs
Appreciate the work OMJ. I never installed the hotspot hack because I went straight to your badboyz rom instead.
so 10 peole that downloaded, did it work? lol geez thanks OMJ for those who didnt tell you
If you want to continue to use stock room, and need hot spot, there is a trick using the app shortcut master from the market where you just have to edit 1 line . It works on LG g2 and g3 (I used it). If anyone wants to try, I'll look for a link to the directions.
Sent from my 2PS64 using XDA-Developers mobile app
scottspa74 said:
If you want to continue to use stock room, and need hot spot, there is a trick using the app shortcut master from the market where you just have to edit 1 line . It works on LG g2 and g3 (I used it). If anyone wants to try, I'll look for a link to the directions.
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
Could you post directions for this.
This may be what he is talking about. Used it also on my LG G2.
Have not tested on HTC 10 though.
http://forum.xda-developers.com/showthread.php?t=2889436.
Sent from my 2PS64 using Tapatalk
fryguy said:
This may be what he is talking about. Used it also on my LG G2.
Have not tested on HTC 10 though.
http://forum.xda-developers.com/showthread.php?t=2889436.
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
Good work. That is exactly what I was referring to. Thank you. I hadn't seen the request. I have no idea if it would work on HTC 10. But, it doesn't seem like a huge stretch that it would.
Sent from my 2PS64 using XDA-Developers mobile app
scottspa74 said:
Good work. That is exactly what I was referring to. Thank you. I hadn't seen the request. I have no idea if it would work on HTC 10. But, it doesn't seem like a huge stretch that it would.
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
No good. Those values don't show up in shortcut master.
Anyone had any luck with this? I can't find the file that OMJ is talking about to save my life. I don't see any attachments.
I've tried editing my build.prop and I've tried editing the default xml to change the rules and enforcement to 0.
The latter DID let the hotspot start for me. Other devices can connect. But they never get network connectivity.
Can anyone help me confirm what I'm missing?
Fabio Grasso's WiFi Tether app works for me on the 10.
https://sites.google.com/site/wifitetherrouter/
I can't get it to work on mine! I've achieved root, installed the app, matched all the settings up....no internet connection. It's strange, my Ipad can see the network and it says it's connected. As soon as I connect it though I lose internet connection on both devices, can't load a single web page. Did you have this issue at all or would you have any idea what would cause this? I'm at my wits end with it, and I've used this app for 2 years on my M8.
landaile said:
Fabio Grasso's WiFi Tether app works for me on the 10.
https://sites.google.com/site/wifitetherrouter/
Click to expand...
Click to collapse
HAH. I couldn't get it to work with this app (not initially anyway). I turned to his site to check if there were settings already available to use for the HTC 10 because it couldn't auto-detect the wifi adapter name. On his site, it says HTC users need to uninstall "TetherGuard" - system app.
Did that, figured I'd reboot and try the built in tethering which now works beautifully. Got it still within my refund window for Wifi Tether Router.
So some combination of what I posted above plus UNINSTALL TETHERGUARD! And life's good now. Thanks much.
ShadowDrake said:
HAH. I couldn't get it to work with this app (not initially anyway). I turned to his site to check if there were settings already available to use for the HTC 10 because it couldn't auto-detect the wifi adapter name. On his site, it says HTC users need to uninstall "TetherGuard" - system app.
Did that, figured I'd reboot and try the built in tethering which now works beautifully. Got it still within my refund window for Wifi Tether Router.
So some combination of what I posted above plus UNINSTALL TETHERGUARD! And life's good now. Thanks much.
Click to expand...
Click to collapse
It didn't give me the option to uninstall, just disable. I did that and tweaked with a few more things and that seemed to fix it. Fingers crossed!
shaky_handed_surgeon said:
It didn't give me the option to uninstall, just disable. I did that and tweaked with a few more things and that seemed to fix it. Fingers crossed!
Click to expand...
Click to collapse
You can use Titanium Backup to uninstall TetherGuard since you're rooted, instead of just disabling it.
Anyone want to post the specific changes/tweaks they've done? I've done changes to build.prop and default.xml (using the various settings found all over XDA) and also disabled/removed TetherGuard, but I'm still stuck at hotspot enabling but no data connection for any connected devices (data still works for the phone while hotspot is on though).
steelvulture said:
Anyone want to post the specific changes/tweaks they've done? I've done changes to build.prop and default.xml (using the various settings found all over XDA) and also disabled/removed TetherGuard, but I'm still stuck at hotspot enabling but no data connection for any connected devices (data still works for the phone while hotspot is on though).
Click to expand...
Click to collapse
The apns have to be modified, we used to edit the database manually, but now edit in framework-res, I'll post a zip later.
Sent from my HTC 2PS64 using XDA Labs
1. Install Network Signal Refresher Lite from the Playstore
2. Open both Network Signal Refresher and the Mobile Hotspot in split screen.
3. Hit the Refresh button in Network Signal Refresher and the quickly turn on Mobile Hotspot.
4. Profit!
Hope this helps, and you find it useful.
335Deezl said:
1. Install Network Signal Refresher Lite from the Playstore
2. Open both Network Signal Refresher and the Mobile Hotspot in split screen.
3. Hit the Refresh button in Network Signal Refresher and the quickly turn on Mobile Hotspot.
4. Profit!
Hope this helps, and you find it useful.
Click to expand...
Click to collapse
The easiest method to bypass restrictions! Thanks Deezl!
---------- Post added at 11:37 PM ---------- Previous post was at 10:59 PM ----------
335Deezl said:
1. Install Network Signal Refresher Lite from the Playstore
2. Open both Network Signal Refresher and the Mobile Hotspot in split screen.
3. Hit the Refresh button in Network Signal Refresher and the quickly turn on Mobile Hotspot.
4. Profit!
Hope this helps, and you find it useful.
Click to expand...
Click to collapse
Here's a video also...
thats pretty great except for the sound on that video!
Using this method can our carrier still see us tethering though? On my 6P I use an app that requires root and it completely hides my tethering usage. But not planning to root the Pixel so I'm wondering if this method hides it. Thanks!
My apologies, I just wanted to quickly post a video and participate. Next time, I will edit!
hillpounder said:
My apologies, I just wanted to quickly post a video and participate. Next time, I will edit!
Click to expand...
Click to collapse
Thank you for putting it together though! Great visual
Sent from my Nexus 6P using XDA-Developers mobile app
will this method working on a Galaxy S7 At&t?
[email protected] said:
will this method working on a Galaxy S7 At&t?
Click to expand...
Click to collapse
Possibility, but you should ask in the S7 section, there should be someone there that would know
Sent from my sailfish using XDA Labs
[email protected] said:
will this method working on a Galaxy S7 At&t?
Click to expand...
Click to collapse
Are you rooted? If so try the built prop editor and add the tethering line. You should check forums for att s7
Sent from my Pixel XL using XDA-Developers mobile app
Been doing some testing with mine which is on T-Mobile. After adding the dun=0 with adb I can enable without a problem on my grandfathered plan. But they still throttle after 100mb of usage. So far I haven't found a way around this on any device I have.
The only thing that worked on the other phones is pdanet wired tethering. Wish I could find a way to get wireless tethering working like the good old days.
335Deezl said:
1. Install Network Signal Refresher Lite from the Playstore
2. Open both Network Signal Refresher and the Mobile Hotspot in split screen.
3. Hit the Refresh button in Network Signal Refresher and the quickly turn on Mobile Hotspot.
4. Profit!
Hope this helps, and you find it useful.
Click to expand...
Click to collapse
After 7.1.1 Nougat update, it no longer works. Did anyone else have the same problem as me?
Haven't updated yet. I modified the buildprop, so I can native tether now.
335Deezl said:
Haven't updated yet. I modified the buildprop, so I can native tether now.
Click to expand...
Click to collapse
Looks like I gotta root! But I will wait for a few days... Let me know if you've found a non-rooted method! Thank you sir.
Delete
335Deezl said:
Haven't updated yet. I modified the buildprop, so I can native tether now.
Click to expand...
Click to collapse
Can you post what line to change in detail? I'm about to root just to get this to work again. Also if i edit the buildprop can I still do OEM firmware updates?? thx
synplex said:
Can you post what line to change in detail? I'm about to root just to get this to work again. Also if i edit the buildprop can I still do OEM firmware updates?? thx
Click to expand...
Click to collapse
just add the following line the bottom of your build.prop.
net.tethering.noprovisioning=true
7.1.1 update on pixel (Google play store) also ruined this for me. The network signal refresher workaround worked great before the update.
Signal refresher doesn't work for hotspot anymore
hillpounder said:
After 7.1.1 Nougat update, it no longer works. Did anyone else have the same problem as me?
Click to expand...
Click to collapse
It doesn't work anymore for me, either.
Confirmed not working on 7.1.1
Any new ideas?
mkenny2 said:
Confirmed not working on 7.1.1
Any new ideas?
Click to expand...
Click to collapse
Use the SIM card eject trick. Hit hotspot right after injection of SIM card. Profit.
Hi,
sorry if this was asked before - but now Adhell is dead, SABS is DMCA'd - what can we do for Adblocking now, despite using the Samsung browser with Plugins?
Any other way without root/hosts file? Thanks.
fBx said:
Hi,
sorry if this was asked before - but now Adhell is dead, SABS is DMCA'd - what can we do for Adblocking now, despite using the Samsung browser with Plugins?
Any other way without root/hosts file? Thanks.
Click to expand...
Click to collapse
SABS still works fine even though it won't be getting updated anymore. I'm currently still using it.
-Ric- said:
SABS still works fine even though it won't be getting updated anymore. I'm currently still using it.
Click to expand...
Click to collapse
Okay yeah, but didn't see any download links since the thread was edited. I'll try to find it somewhere else
Or you could run pihole on raspberry for network wide adblocking rather than individual devices. Plus you can run openvpn so you can browse safely through your home network when off site.
Sent from my SM-G950F using Tapatalk
go to google play look for VPN HOSTS... its an app that creates a vpn on your phone and uses the hosts file you provide and blocks ads just fine.. been using this since it was created and it works great.. no root needed, its a virtual hosts file on my phone.. free download from git hub, its in the description on google play. its free and simple...
use this. follow the adb directions and itll work. its what im using
fBx said:
Hi,
sorry if this was asked before - but now Adhell is dead, SABS is DMCA'd - what can we do for Adblocking now, despite using the Samsung browser with Plugins?
Any other way without root/hosts file? Thanks.
Click to expand...
Click to collapse
Try to use Seven's AdClear:
https://forum.xda-developers.com/android/apps-games/app-adclear-root-version-ad-blocker-t3309011
adhell 2 works for me
Disconnect pro..
MindTrix said:
go to google play look for VPN HOSTS... its an app that creates a vpn on your phone and uses the hosts file you provide and blocks ads just fine.. been using this since it was created and it works great.. no root needed, its a virtual hosts file on my phone.. free download from git hub, its in the description on google play. its free and simple...
Click to expand...
Click to collapse
Yeah that's also a possibility, so you don't need knox license every three months.
blane3298 said:
use this. follow the adb directions and itll work. its what im using
Click to expand...
Click to collapse
But that's only a package disable, not ad blocker.
torr310 said:
Try to use Seven's AdClear:
https://forum.xda-developers.com/android/apps-games/app-adclear-root-version-ad-blocker-t3309011
Click to expand...
Click to collapse
I found notSABS, which seems to be a re-upload of SABS and this works just as Adhell 2 did before.
capuagenclik said:
adhell 2 works for me
Click to expand...
Click to collapse
Yeah wait for the next Knox renewal. You can't build new Adhell packages anymore. Of course you could use your old apk and edit it yourself I guess.
Invincible29 said:
Or you could run pihole on raspberry for network wide adblocking rather than individual devices. Plus you can run openvpn so you can browse safely through your home network when off site.
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
But that way I don't have block when on mobile data.
Bart3n said:
Disconnect pro..
Click to expand...
Click to collapse
I need systemwide, also I use chrome not Samsung browser. Tried it once but didn't like it.
fBx said:
I need systemwide, also I use chrome not Samsung browser. Tried it once but didn't like it.
Click to expand...
Click to collapse
Not disconnect pro for samsung browser but just disconnect pro.
It's systemwide
Bart3n said:
Not disconnect pro for samsung browser but just disconnect pro.
It's systemwide
Click to expand...
Click to collapse
The thing that frustrates me with Disconnect Pro is that there's no custom list functionality. Otherwise it would be probably the best available.
+1 for Raspberry Pi and the use OpenVPN to tunnel DNS whilst not at home.
Here is the apk for SABS for those that want to set it up
Blokada (www.blokada.org) works really well.
It is free and open source and works across all apps (not only the browser)!
It doesn't require root, supports both wifi and mobile networks, and is perfectly safe and simple to use.
You can make exceptions for certain apps and hosts and it is using Black- and Whitelists.
Just make sure the app gets not killed by battery optimization and things like that (there is a setting to ensure it keeps running - showing a VPN symbol in the status bar).
Best regards
Amber
fBx said:
Yeah that's also a possibility, so you don't need knox license every three months.
But that's only a package disable, not ad blocker.
I found notSABS, which seems to be a re-upload of SABS and this works just as Adhell 2 did before.
Yeah wait for the next Knox renewal. You can't build new Adhell packages anymore. Of course you could use your old apk and edit it yourself I guess.
But that way I don't have block when on mobile data.
Click to expand...
Click to collapse
oops i misread
orkavaneger said:
Here is the apk for SABS for those that want to set it up
Click to expand...
Click to collapse
now Thank you!
and dont forget there is notSabs
crayonyes said:
now Thank you!
and dont forget there is notSabs
Click to expand...
Click to collapse
Anytime dude
AmberLynn said:
Blokada (www.blokada.org) works really well.
It is free and open source and works across all apps (not only the browser)!
It doesn't require root, supports both wifi and mobile networks, and is perfectly safe and simple to use.
You can make exceptions for certain apps and hosts and it is using Black- and Whitelists.
Just make sure the app gets not killed by battery optimization and things like that (there is a setting to ensure it keeps running - showing a VPN symbol in the status bar).
Best regards
Amber
Click to expand...
Click to collapse
kinda like what I said about VPN Hosts..... which is free ... you provide the hosts file and you flip a virtual switch to turn in on or off anytime.. puts the virtual private network icon up in the top bar so you know its on ... and its free too ... I like simple and it is...
There you go. there is a new one. its called NotSABS. Its basically the same as SABS but uts been update it from a different dev. Ive been using it for weeks now without having a problem. :good:
https://github.com/GoldenKappa/notSABS