[Q&A] [ROM][CM12.1][OFFICIAL] CyanogenMod 12.1 - G2 Q&A, Help & Troubleshooting

Q&A for [ROM][CM12.1][OFFICIAL] CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.1][OFFICIAL] CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

[email protected] said:
For me it is not working properly. After flash and reboot - some google apps (gmail, youtube, play store, etc.) don't work. When I'm trying to open them - there is a popup, that application has been stopped.
Click to expand...
Click to collapse
I had the same problem, just uninstall the google apps and re-install from playstore

I've just flashed 12.1 and I'm having the following issues:
Gesture typing is not working with the AOSP keyboard (and it is enabled in the settings)
Heads up notifications are not working
Is it just me or any of you are having the same issues?
Quick question: is there a way to change the folder view? It was a circle in CM12 with stacked icons, and now its a square with the icons placed in grid. I prefer the stacked version.
Thanks!

If after flashing CM12.1 from CM12 you encounter this
Code:
E: [-] Failed to mmap aboot.
E: Error loki-ifying the boot image
you must disable loki support from advanced section.

Problem after flashing :S
Hello!
I flashed CM 12.1 over my CM 12 and now the phone seems to be in an infinite switch on - switch off loop. The LG logo appears on the screen, then it switches off, and again... How can I perform a factory reset? I tried "the traditional" way (holding the two buttons in the rear" but it won't stop the infinte loop :S

miodmo said:
Hello!
I flashed CM 12.1 over my CM 12 and now the phone seems to be in an infinite switch on - switch off loop. The LG logo appears on the screen, then it switches off, and again... How can I perform a factory reset? I tried "the traditional" way (holding the two buttons in the rear" but it won't stop the infinte loop :S
Click to expand...
Click to collapse
Clean flash because they upgrade from 5.0.x to 5.1.x

I have a problem with charge which is very very slow ! 300mA on Ampère with original câble and charger. On CloudyG2, with original charger, I have not this problem.
Have you also got this issue or it's from me ?

Coming from Official CM12 w/ KK bootstack and JB bootloader and I wanna make sure I do this right.
Dev post looks like it says it works w/ LP bootstack, so should I flash that after factory reset? Any reason not to?
Thanks in advance to anyone who can help.
D801
Edit: I searched for rashed97's posts and saw his latest thread which clarifies. So all I had to do was flash his bumped LP bootstack. Thanks!

Anyone have a good tip for increasing volume? The media playback volume is pretty low.

Alex93917 said:
I have a problem with charge which is very very slow ! 300mA on Ampère with original câble and charger. On CloudyG2, with original charger, I have not this problem.
Have you also got this issue or it's from me ?
Click to expand...
Click to collapse
I'm only getting between 400-700 mA with the stock charger.

Hi there. I have a UK D802 and flashed the latest nightly and I'm loving it. The battery life is amazing.
The only issue I can find is the camera seems to suffer in low light scenarios, where the stock LG camera was excellent. Is there any way I can fix this or potentially revert back to stock LG camera?
Great work. Much kudos!!

What to do if coming from stock lollipop
Hi guys,what do I need to do to install the rom? I'm coming from a lollipop stock rom.

Hi, I hope you can help me guys. I ****ed up and updated from CM updater only installing the new Rom, and now I'm having the boot loop but I can't manage to enter to the recovery, I can however enter download mode. Before this I had CM 12 installed. I hope someone can help me as I'm not very experienced.
Thanks beforehand.

What about the battery life?

Nevermind

Hi my phone is always opening in my pocket and I don't wanna disable double touch to wake. What can i do? I am coming from stock Lollipop.

Anyone else notice they get MMS screenshots sideways? Only seems to happen in the messenger app.

Hi,
can anyone please confirm this:
I am on a d802 with stock v30b, bumped TWRP, rooted (installed via one click recovery and root) and DorimanX Kernel.
I should be able to boot into revovery, do a baclup and full wipe and just flash latest CM12.1, right?
TIA,
Tom

Hi there, can anyone tell me if somewhere there is a log change between nightlies?
Thanks!

Speaker sound very low. Can be fixed?
Great rom btw.

Related

[Q] Dialer Issues / Crashes

Hi, I have installed the latest nightly's and snapshot on my Note 3 N9005 and I am struggling to Dial anyone. The screen keeps going blank. It is a little better when using my Bluetooth Headset but is really totally useless. I usually have to take the battery out and reboot to gain control back.
I have tried
Full Wipe before each install. (cache & data)
CM11 - 27/07/14
CM11 - 26/07/14
CM11 - 25/07/14
CM11 - 08/07/14 M8
All have the same problem.
I am using CWM V6.0.4.7.
I would much rather use Cyanogenmod and am being forced to use one of the Stock ROMS OMEGA V21 which is ok but not what I am after. Is anyone else having this issue? Can I use another dialer?
Any help would be appreciated
:fingers-crossed:
doughty400 said:
Hi, I have installed the latest nightly's and snapshot on my Note 3 N9005 and I am struggling to Dial anyone. The screen keeps going blank. It is a little better when using my Bluetooth Headset but is really totally useless. I usually have to take the battery out and reboot to gain control back.
I have tried
Full Wipe before each install. (cache & data)
CM11 - 27/07/14
CM11 - 26/07/14
CM11 - 25/07/14
CM11 - 08/07/14 M8
All have the same problem.
I am using CWM V6.0.4.7.
I would much rather use Cyanogenmod and am being forced to use one of the Stock ROMS OMEGA V21 which is ok but not what I am after. Is anyone else having this issue? Can I use another dialer?
Any help would be appreciated
:fingers-crossed:
Click to expand...
Click to collapse
Update
I have changed the power button so it allows me to end the call when pressed. This corrects the problem and turning the "Prevent accidental wake-up" off in the Display and Lights section in the Setting Menu. This make CM11 usable thank goodness. :good:
I had the same problem with the latest CM11 M8 nightlies and snapshot version. Also almost useless GPS.
Got suggestions like changing the proximity sensor settings and pulling apart the phone to clean the sensor.
I installed C-ROM on the recommendation of a friend and bingo problems fixed.

[Q&A] [Kernel]***[D80*/LS/VS980/F320x] B14CKB1RD AOSP [1/18/15]***

Q&A for [Kernel]***[D80*/LS/VS980/F320x] B14CKB1RD AOSP [1/18/15]***
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel]***[D80*/LS/VS980/F320x] B14CKB1RD AOSP [1/18/15]***. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
4 cores working with the screen on... battery life....
stuck at logo after kernel flash
I am on the liquid milestone 3.2. I saw that this is the same kernel but updated version that came in the rom so i wanted to update. No matter
Now i am stuck in a boot loop. phone powers on, stays at the LG logo, goes no further. I can get to Download mode, but no recovery.
Is there a way to recover this thing with out having put a locked stock rom on it??
DT2W double tap to wake
I love the Kernal so far however i've got a question about the double tap to wake features. Is there a way to have the screen turn off by double tapping somewhere OTHER than the notification bar at the top of the screen? Also it takes me about 4 or 5 double taps to get the screen to actually wake up, any ideas on any of this ? Thanks!
Hear myself in the phone... rom or kernal problem?
hello love the work you guys do its exciting and interesting. Ive relatively recently started playing with custom roms and kernals etc. love this one because i get excellent battery life as well as a solid LTE signal (two things ive had trouble finding with lollipop so far.. might just be me). Anyway ive got an issue with hearing myself in my phone when im on the phone... its like everything i say approx half a second after i say it.. needless to say its rather annoying, is this a rom or kernal problem? volume settings issue? not sure.. Also my proximity sensor occasionally wont register that my ear is near it.. baaically the screen stays on if im say checking my voice mail or on the phone.. not sure why this happends.. Everything else works great.. some info: d801 lg g2, lastest rr build for lp and i have the lasest blackbird for lollipop. its a really solid combo and im loving it.. thanks for any information you may have
asustweaker said:
I am on the liquid milestone 3.2. I saw that this is the same kernel but updated version that came in the rom so i wanted to update. No matter
Now i am stuck in a boot loop. phone powers on, stays at the LG logo, goes no further. I can get to Download mode, but no recovery.
Is there a way to recover this thing with out having put a locked stock rom on it??
Click to expand...
Click to collapse
did you flash kitkat version or lollipop version? Sounds like you flashed lollipop version
Nicholi85 said:
I love the Kernal so far however i've got a question about the double tap to wake features. Is there a way to have the screen turn off by double tapping somewhere OTHER than the notification bar at the top of the screen? Also it takes me about 4 or 5 double taps to get the screen to actually wake up, any ideas on any of this ? Thanks!
Click to expand...
Click to collapse
Update the touch screen firmware....there's an echo call via android terminal emulator or in my updated version in synapse
Nicholi85 said:
hello love the work you guys do its exciting and interesting. Ive relatively recently started playing with custom roms and kernals etc. love this one because i get excellent battery life as well as a solid LTE signal (two things ive had trouble finding with lollipop so far.. might just be me). Anyway ive got an issue with hearing myself in my phone when im on the phone... its like everything i say approx half a second after i say it.. needless to say its rather annoying, is this a rom or kernal problem? volume settings issue? not sure.. Also my proximity sensor occasionally wont register that my ear is near it.. baaically the screen stays on if im say checking my voice mail or on the phone.. not sure why this happends.. Everything else works great.. some info: d801 lg g2, lastest rr build for lp and i have the lasest blackbird for lollipop. its a really solid combo and im loving it.. thanks for any information you may have
Click to expand...
Click to collapse
These are ROM related errors...the call echo especially... Depending on ROM I could help....also see if it still persists in my latest update
Love this kernal, and I flash when installing a new LP build, but I've been having problems lately. After initial setup or reboot I get the" NO UCI SUPPORT " message. I'm running LiquidSmooth's latest build for the LS980, is anyone else having this issue.
Run om g3 based roms?
VictorAKAx said:
Run om g3 based roms?
Click to expand...
Click to collapse
No. This kernel is for AOSP-based ROMs. G3 ROMs are stock-based.
Typos courtesy of my Ice Cold LG G2 (D803).
just flashed your kernel, got stuck in a boot loop.
VS980, liquidsmooth 3.2 milestone.
what can i do? was excited to try out your update
Great kernel, running super smooth on AICP.
Thanks!
He's working on the fix for cm 12.1.
I sent my files on hangouts, just wait
edit: figured it out
does anyone have a dt2w fix for vs980? i just flashed liquidsmooth 4.0 and everything was working fine, flashed the kernel and it broke my knock on support. i found the zip posted in the main kernel thread (this one) and twrp tells me the file is corrupted
perforatedpaper said:
does anyone have a dt2w fix for vs980? i just flashed liquidsmooth 4.0 and everything was working fine, flashed the kernel and it broke my knock on support. i found the zip posted in the main kernel thread (this one) and twrp tells me the file is corrupted
Click to expand...
Click to collapse
Use the 0 init method:http://forum.xda-developers.com/showpost.php?p=56948464&postcount=73
I'm using F320K with BlissPop v2.3 rom, when flash this kernel for lp 5.0.2, it cause loopboot. Pls up kernel fix for lolipop 5.1. Hope to see it soon. Thanks u
llamas612 said:
I'm assuming that those are 5.0 based, since they're from January, right?
Click to expand...
Click to collapse
I think they're KitKat based. I tried already and it caused my d800 to go in a boot loop.
I wonder if anyone has got, perhaps, the 5.1 d800 version? I'm getting kinda desperate since my fav rom switched to a kernel that makes my phone really really hot.
Really need a link to latest 5.1 B14ckB1rd kernel for D800 :/
Pls...

[Q&A] [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015)

Q&A for [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Many thanks to our Lord for his hard work in last weeks.
Now it is a "real" S5 ))
Sound control?
The Boeffla control app v. 2.1.73 only offers volume adjustments in the Boeffla-Sound section. I tried running the Boeffla Sound Control App v. 1.7.1 from the market as well as a presumably modified version I found on XDA, but both force close immediately. Is there a way to take more advantage of the Boeffla-Sound options on this kernel (2.0-beta3-CM 12.1)?
Issue with CPU and GPU frequencies
Hello...
I have a Samsung Galaxy S5 and i have installed CM12 with the latest kernel 1.0 beta3 and i experience freezes and hot reboots...
I have not overclocked anything as you can see from the pictures and i have left all frequency clock settings at default values, but when i go to CPU-Z i see the values of CPU and GPU overclocked...
In the attached images i have the default settings in Boeffla for CPU on 2457MHz and in GPU at 578MHz and in CPU-Z i see that max CPU frequency is 2.84GHz and GPU is 657MHz...
Why is this happening?
Thank you in advance for your help...
AnDrEaS
Issue with CPU and GPU frequencies
It is being answered by Lord Boeffla...
All is normal. Tools like cpu-z and others always display the maximum possible frequency, regardless of what you cap the frequency to.
So, it just shows something not correct.
You can verify that very easily by using tools like CPU Spy etc and you will see, these high frequencies are indeed not used unless you allow it.
The reasons is: These tools always assume, when overclocking frequencies are available, they are used. Which is not the case by default in my kernel.
nameless rom KLTE 4.4.4
does it work on namelessrom nightly with stock kernel?
edit- will overclocking freeze my phone? i tried ktoonsez's kernel and it froze my phone. i had to reflash /system and rom, thankfully i kept all my data.
---------- Post added at 09:10 PM ---------- Previous post was at 08:57 PM ----------
i would like a list of working roms (4.4x) that work on this kernel. ty
Hi! Thanks in advance. Im having problems with the kernel. Im using resurrection rom and this kernel, and Im suffering a battery draining specially when I put the phone off and I go to sleep or something. I can be sleeping for example 6 hours, and later having around 10% battery less. Im using Greenify, Google Services disabled, but somehow I can not have a real deep sleep when Im gone.
Excuse my english. And thanks again.
help me please
Hello and thanks for a great kernel . I have a big problem : the afternoon I tried to convert the partition data and cache to f2fs but i failed . I tried to return to ext4 and seems to have gone quite perfect . Now I can install rom and gapps but not the kernel ( because bootloop ) can you help me ? I'm desperate
p.s: sorry for my bad english
phoenix rom and boeffla 12x
Hi,
coming from phoenix rom. tried lolli stock kernel which wory fine. tried 12x kernel which do fail to boot from the very beginning. any idea why?
stefan
Flashed the latest beta kernel, reboots after booting and doesn't stop.
Thanks for your work...
Hello Boeffla,
i use your kernels since S3 and i was so happy when i read, that you also support the S5....
I'm very happy with the kernel and i never had problems with the kernel at all (using smoove, interacitve, conservative)!
I really appreciate when you further support the S5 development!
regards Oliver
it wiil work on 5.1 android blisspop v3.5?
Suhaimi.adi9 said:
it wiil work on 5.1 android blisspop v3.5?
Click to expand...
Click to collapse
I tried this kernel (2.1-beta8) on BlissPop v3.6 (BlissPop-v3.6-klte-OFFICIAL-20150701-2254), but some features didn't work (ex: couldn't use tethering).
IMPORTANT: BlissPop is "customized" rom, so you must read and understand when want to use:
Lord Boeffla said:
*** Note, I only test the kernels against official CM12 and CM11 by CM team, not any "customized" roms. If it does not run for you on other roms, do not expect support by me as this is impossible ***
Click to expand...
Click to collapse
Sm 900m
Kernel working with s5 SM-900m?
I would like to test this kernel with Exodus ROM 5.1.1 (http://forum.xda-developers.com/galaxy-s5/orig-development/rom-team-exodus-klte-t3135876). Is it compatible? If yes, how do I know what version of the kernel to take (CM11, CM12, CM12.1, Stock Lollipop 5.0)?
Thanks.
Problems with bluetooth on g900t
I have a g900t with cyanogenmod 12.1 installed. Whenever I try to pair my sony speakers to my phone the speakers do not work properly. So my question is, can I installed this kernel on my g900t? would this fix the bluetooth problem?
Thanks in advance.
Hi, I am new to this. Just got my S5 today.
The phone still got Android 5.0 with TouchWiz on it (original Samsung firmware) and is not rooted yet. I want to install CM 12.1 later. What kind of kernel do I need now? If I install the kernel via Odin is my phone then rooted and ready to install CM 12.1?
Thanks for any help.
Sebi80 said:
Hi, I am new to this. Just got my S5 today.
The phone still got Android 5.0 with TouchWiz on it (original Samsung firmware) and is not rooted yet. I want to install CM 12.1 later. What kind of kernel do I need now? If I install the kernel via Odin is my phone then rooted and ready to install CM 12.1?
Thanks for any help.
Click to expand...
Click to collapse
You need a tar of a recovery. Twrp..http://forum.xda-developers.com/showthread.php?t=2727406
[RECOVERY][klte] TWRP 2.8.7.0 touch recovery [2015-06-23] or others. But i would spend some time looking up the way to go on help threads.. If you need help finding them shout me....
Dont rush. Take time to read up...
Sent from my klte using Tapatalk
I installed Boeffla Kernel and CM12.1 successfully. All works fine. However, my phone always says that I have no root rights. Boeffla Kernel for sure is installed and is showing up in my settings. What can be wrong?
Sebi80 said:
I installed Boeffla Kernel and CM12.1 successfully. All works fine. However, my phone always says that I have no root rights. Boeffla Kernel for sure is installed and is showing up in my settings. What can be wrong?
Click to expand...
Click to collapse
You have to enable root, or to flash SuperSU (a third party, actually the most popular root solution for Android.).
I would actually like to recommend you the stock CyanogenMod root, but I myself am using SuperSU for a while, and I would have to search how to use the stock CM root with 12.1.
So either install SuperSU app from the play store, and download this zip: download.chainfire.eu/supersu, boot to recovery and flash it, to enable Chainfire's closed source root, or Google 'How to enable root on CyanogenMod 12.1' to find out how to use CyanogenMod's own root solution.
Edit:
So I dont have to type everything (instructions how to enable CyanogenMod's own root implementation, IIRC, and if nothing has changed in the meantime, it is Koush's implementation, which is open source:
http://www.gammerson.com/2015/07/how-to-enable-root-acces-in-cyanogenmod.html?m=1
Sent from my SM-G900F using Tapatalk

[Q&A] [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]

Q&A for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Link
And where is the link to download ROM?
my phone is not working pls help me
2 days before when i rebooted my phone it showed me as encryption unsuccesful and stucked at boot logo.but i tried to wipe data...bt it showed me error mount/data error...so i tried to flash using sp flash tools....instead of selecting firmware upgrade and tried format and download....format done but on download it showed me error 5069....pls help me..to solve this ASAP...
I repartioned my device does it causes any defects??
i dont know anything where i have to post this....pls help
Issues with GPS
Hello smokerman,
First thank you for this incredible rom, it's very fast and slick !
I have a brand new wiko rainbow and i tried to flash numerous times your rom (slimpop v2) i noticed no issues except with the GPS and location services in general, i activated the GPS + 3G+wifi network positioning, and nothing seems to work i can't get a position, i tried to use numerous gps fix app, and even your own GPS fixer for the wiko rainbow published on your website in april, and still no luck.
I flashed the wiko in stock kitkat 4.4.2, installed TWRP recovery after rooting it, then used the recovery to flash the slimpop v2 zip + the rootfile do the wiping and all the shebang following your instructions to the letter, but everytime (i tried 5 times) the location service just don't work, i tried all the engineering tools available in the dev section of the phone to try and pinpoint the issue but no luck.
Of course i tested if the GPS and location services were working fine with the stock wiko 4.4.2 rom (gps tools, dev tools, waze) it all work fine !
Do you have any ideas what i could have done wrong ? Im open to do some testings, or report any kind of logs you would need to track that issues.
Thanks,
Cya
EDIT1 : strangely enough after a few tests with differents roms, it seems that all the roms i tried that use the WR kernel have issues with the GPS (even with your fix) the ones that doesn't use it have no problems working. I was thinking maybe that brand new rainbow has a different GPS chip ? i got no clues as to why it's not working
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
d4rk80z said:
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
Click to expand...
Click to collapse
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
ktsarlz said:
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
Click to expand...
Click to collapse
Have you tried for the initial stock flash to use the wiko official tool V13 KK ? maybe there is something wrong going on with your spft, otherwise no clues ^^
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
d4rk80z said:
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
Click to expand...
Click to collapse
For me, with v10 as base still does not boot Haha
Slimpop is based on KitKat, I suppose??

If Anyone Need Help I Help Here

You Can Ask Help Here
Send From My SM-G900F Using XDA-Developers Mobile App
Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.
Omnirom 5.1.1 on Nexus7, i can't use any of custom kernel. The installation work fine but after reboot the kernel is not install.
Thanks
Sent from my Nexus 7 using XDA-Developers mobile app
Hi,
i'm rather new with rooting, flashing and all the stuff that comes with it.
Now i have an Oppo Find7 and i managed to install the following:
-TWRP recovery
-OmniRom 5.1 nightly
-Gapps 5.1
I'm pleased everything worked but now i saw OmniRom 6.0, when i tried to flash it with gapps i encountered the first problem:
-The install of OmniRom went well but when i try to install Gapps 6.0 stock, it is saying i dont have enough storage? Can i somehow increase or free up this storage to it can fit?
Second question: If the above is possible, is there a way to flash OmniRom 6.0 and Gapps 6.0 without the loss of data? or do i still have to backup and restore with titanium backup?
Thanks in advance
Hi ...I'm using SM-N900 with lollipop 5.0 ...
I need to update my framrware by installing new rom (marshmallows ). However most what I found is that they have problem with the camera ...
IS THERE ANY STABLE ROM SO I CAN USE IT ?
Regards
Sent from my SM-N900 using XDA-Developers mobile app
Request Icon Resize inbuilt utility for omni rom 6.0.1
Dear Concern,
I am using omni rom 6.0.1 rom on my oppo find 7a the room is very smooth with all working function.
but the apps icon size are very big please add some functionality to resize the icon ASAP.
or please confirm if i am missing this option in ROM
Thanks & Regards.
Balvinder Singh
[email protected]
Hi there,
I have a Nexus 7 2013 wifi. Latest omni marshmallow but I have one issue. Battery drain.
It seems as it does not suspend. Maybe someone could point me in the right direction to help squash this pesky bug.
What I can add is that I have a Nexus 5 with same apps and settings without the issue .
Thank you
wich to download for Find 7a
Hi I'm glad to see omni back, as I was a user on samsung galaxy s2 !!!
I left the rom when i moved to find 7a, but now i absolutely want to try it !
So simple question as I didn't found it anywhere:
For my Find 7a, should I download rom from folder :
1) Find7
2) Find7op
Thanks to all
St Exupery said:
Hi I'm glad to see omni back, as I was a user on samsung galaxy s2 !!!
I left the rom when i moved to find 7a, but now i absolutely want to try it !
So simple question as I didn't found it anywhere:
For my Find 7a, should I download rom from folder :
1) Find7
2) Find7op
Thanks to all
Click to expand...
Click to collapse
Find 7. Find7op is the One Plus One.
Clear, Precise, Thanks you !
Installing this we
Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.
"I have version SuperSU-v2.65-20151226141550 and this I flashing automatically after each OTA.
Just copy SuperSU zip to "/sdcard/OpenDelta/FlashAfterUpdate" and disable Secure mode in settings of system update."
I got this step from oppo forum, and it work perfectly and now my question is :
can i do samething like that but this is for font ?
because everytime after update omni nightly, i need too flash my font again
thx u
Really Need Help..... I have a mediatek 6572 device called Innjoo i1k .....
And stock rom which is flash able through sp flash tool.... guide me that how i port mt6572 rom into my device actually it need some replacement of file that have in the stock rom... but i have stock rom in sp flash tool firmware format not in zip format... waiting for your reply .... will be very thank full to u..... thanks.....
Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.
Help with Galaxy Express 3
ModeFX01 said:
You Can Ask Help Here
Send From My SM-G900F Using XDA-Developers Mobile App
Click to expand...
Click to collapse
I just upgraded from ZTE Maven running Android 5.1, to a Galaxy Express 3 running Android 6.0.1. love the phone, but for one thing. I playing a game called Walking War Robots. It played good on the 5.0, but really lags bad on the 6.0.1.. I thought the better phone would be better but it's worse. I've also noticed that the graphics are better for the 6.0.1, including shadows for robots, etc. I believe it adds to the problem. What I'd like to know, is there a way to improve the performance of my phone to get rid of the lag, or is there a way to disable enhanced graphics and make the game think I'm running 5.0 to get rid of the shadows and enhanced graphics. I can do without robot shadows for the sake of smooth gameplay. Any help will be greatly appreciated... YodaXIII
password reset?
I decided to try the official Nougat for my 6P. Before going there, I made a TWRP backup, which I used "adb pull" to get to my computer. After trying Nougat and deciding I didn't like it, I went back to Omnirom from the TWRP backup. At boot it asks for the decryption password, which works fine, and omnirom starts up correctly. It then prompts me for password after restart, and it insists that I enter the wrong one. What options do I have to get past this, other than a clean install and then recover my apps/data from backups?
[edit: solved it] I entered the file manager of TWRP and removed /data/system/locksettings* After this, the next reboot required decryption password, as expected, but did not require a lockscreen password, so all was fine and I could again set a new lockscreen protection.
I have a micromax unite 4 pro (Q465) but on google there is no recovery img for any recovery I request u to help me how can I install a custom recovery to flash a zip filee please help me
Need custom Rom for honor 6 h60-l04
Hi i'm using huawei honor 6 h60-l04...There is no custom rom available for this phone. Its a nice mobile with 3gb ram ..but no custom rom available.so anyone please build any custom rom ???:crying:
How can i upgrade HTC DESIRE 820
Hi,
i have htc desire 820s ,i want to upgrade my mobile 4.4.4 to 5.1 or other update version ,
any one guide me about that ,i have already my device rooted ,so please tell me how can i do
thanks

Categories

Resources