Database Users

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again

jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.

boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.

A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.

if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app

radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:

jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.

markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!

I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?

Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.

My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

[Q] Did I just brick my s4?

Hi, I have a rooted galaxy s4 LTE with android 4.3, and was going to update to 4.4.2 via odin 3.09, but during the middle of the installation, I heard a usb disconnection sound, and a red light saying fail appeared on odin. I waited a while, but nothing, and when I restarted my phone, I got that message "firmware upgrade encountered an issue. please select recovery mode in kies and try again" with some odin console messages on top.
I don't know why I can't recover with kies, nothing shows up on the list, and I tried to flash again with odin, using the same rom, but it failed.
what should I do?
I downloaded the official rom from sammobile.
thanks in advance

fael097 said:
Hi, I have a rooted galaxy s4 LTE with android 4.3, and was going to update to 4.4.2 via odin 3.09, but during the middle of the installation, I heard a usb disconnection sound, and a red light saying fail appeared on odin. I waited a while, but nothing, and when I restarted my phone, I got that message "firmware upgrade encountered an issue. please select recovery mode in kies and try again" with some odin console messages on top.
I don't know why I can't recover with kies, nothing shows up on the list, and I tried to flash again with odin, using the same rom, but it failed.
what should I do?
I downloaded the official rom from sammobile.
thanks in advance
Click to expand...
Click to collapse
i had the same problem before! it was the usb ports in my pc ! i changed pc, i used my laptopt and everything were ok! just test another usb port or another pc using odin and original rom and everything should be ok! Dont panic ur phone is ok
remember always to run odin as administrator

hey! yeah, apparently it was those front usb ports, both of them weren't working properly, when I connected to another usb behind the computer it worked fine installing the same rom through odin.
phew!
thanks

[Q] How do I unbrick my galaxy s4???

Ok. So here's what happened. I wanted to root my verizon galaxy s4 and put stock kitkat on it. It was on 4.3. So I rooted it. No problem. Then I tried to put on CWM so I could flash AOPK. But, once I put CWM on, I could not get it into recovery mode. It said that unauthorized software was on my device, not approved by verizon. The only way I could turn on the phone was to put it into download mode and then hit cancel. I wanted to unroot the phone at that point and try again. Also with downgrading it. So I downloaded ODIN and tried to restore my phone to samsung stock 4.2.2. So I tried it, it worked for a while and then ODIN said that it failed. Then when I turned on my phone, it gave me a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." So I opened Kies, connected the phone, and tried to do emergency recovery, but it did't recognize my device. So I selected firmware upgrade and instilation. It downloaded and everything but it said "this devices version cannot be updated." So now I have no idea what to do. I can only go into download mode now. Please help me! What should I do?

sounut said:
Ok. So here's what happened. I wanted to root my verizon galaxy s4 and put stock kitkat on it. It was on 4.3. So I rooted it. No problem. Then I tried to put on CWM so I could flash AOPK. But, once I put CWM on, I could not get it into recovery mode. It said that unauthorized software was on my device, not approved by verizon. The only way I could turn on the phone was to put it into download mode and then hit cancel. I wanted to unroot the phone at that point and try again. Also with downgrading it. So I downloaded ODIN and tried to restore my phone to samsung stock 4.2.2. So I tried it, it worked for a while and then ODIN said that it failed. Then when I turned on my phone, it gave me a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." So I opened Kies, connected the phone, and tried to do emergency recovery, but it did't recognize my device. So I selected firmware upgrade and instilation. It downloaded and everything but it said "this devices version cannot be updated." So now I have no idea what to do. I can only go into download mode now. Please help me! What should I do?
Click to expand...
Click to collapse
Ask your questions here...
http://forum.xda-developers.com/galaxy-s4-verizon?nocache=1&z=1407835153226421
It's a forum specificaly for the Verizon S4. You will find alot more users who have intimate knowledge of your device to assist you there.

sounut said:
Ok. So here's what happened. I wanted to root my verizon galaxy s4 and put stock kitkat on it. It was on 4.3. So I rooted it. No problem. Then I tried to put on CWM so I could flash AOPK. But, once I put CWM on, I could not get it into recovery mode. It said that unauthorized software was on my device, not approved by verizon. The only way I could turn on the phone was to put it into download mode and then hit cancel. I wanted to unroot the phone at that point and try again. Also with downgrading it. So I downloaded ODIN and tried to restore my phone to samsung stock 4.2.2. So I tried it, it worked for a while and then ODIN said that it failed. Then when I turned on my phone, it gave me a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." So I opened Kies, connected the phone, and tried to do emergency recovery, but it did't recognize my device. So I selected firmware upgrade and instilation. It downloaded and everything but it said "this devices version cannot be updated." So now I have no idea what to do. I can only go into download mode now. Please help me! What should I do?
Click to expand...
Click to collapse
Not an easy one this one, but can be solved.
First step: get the right firmware from SamMobile. (phone/operator/country).
Uninstall Kies (and USB drivers).
Reinstall Kies.
Obviously, phone removed all the time form PC!
Shut down the phone (it should be fully charged before, using the normal power adaptor).
Get phone to download mode. Still not connected
Connect phone and wait for the drivers to install.
Start Odin and flash the right firmware (watch for the blue button in Odin, it means the phone is connected OK).
IF it does not work, try another USB port (maybe even a different computer).
If it does not work the first time, in spite off all the above steps successful, don't despair. Shut down the phone (keep pressing power button) and restart in download mode. Repeat Odin procedure.

Stuck on Samsung Logo Odin and Wipe done

Hi, I recently became a Galaxy S6 Edge+ as a gift, which is stuck on the Samsung Logo (blinking). I am not new to flashing Firmware and Roms (came from the HTC HD2 and Dell Streak 5), but everything I do, I can not come through this. Now I need your help, since it's my first Samsung device. Maybe I have something forgotten?
My device:
SM-G928F with Regional Code AUT (free Switzerland firmware) --> Also Samsung Smart Switch shows me this AUT Version (but it wont recognize it, shows it after typing in the serial)
What have I done:
Samsung Smart Switch does not recognize it.
The last 24 hours I have downloaded the firmware through SamFirm 4 times, I have flashed the phone via Odin about 8 times, after the flashs I have wiped the cache and resettet data (full wipe) through the recovery. One time, the phone came to the android optimatization, but it was stuck on the last app (was 30 minutes on this), after reboot it was stuck on the Samsung logo.
Now I need your help. What can I do further? Do I missed something? Any ideas?
Something strange I noticed: When the phone is off and I plug it in to the wall, the battery drains. I have to put the phone to Download-Mode to charge it. Is it linked to the firmware problem? The charger is original Samsung.

So, I flashed TWRP, the Note7 Deodexed Rom and SkyHigh kernel, but it's the same... any sugestions?
I read about a pit file, what is that? May be this the solution?

What I did the last 3 houers was to test Smart Switch With the mac version, the rescue function did not work, the hole program crashed each time. On the windows version it suceed, but my phone is showing just the blinking Samsung logo. Every now and then it vibrates, but nothing happens, so I am at the start of the problem again. Any ideas?

Next update: I flashed the original firmware with a pit file 3 minutes ago. I learned a lot, learnt that the pit files are the partition-files. Now I'm hoping, that with the new partitions it will boot properly :good: . Stay tuned!

Still the same issue. Please help me
Whenever I start the Recovery, it says "installing system update" and then there is a dead Android, does this matter?

A 4 part firmware with pit file did not help. I downloaded another Firmware from another source, also the same. Now I will do a downgrade and look, if this helps. Pleeeeease, help me!
Infos from the download mode:
Produkt Name: SM-G928F
CA_Type: CA_3
Current Binary: Samsung Official
System status: Custom
Secure Download: Enabled
Know warrenty void: 1 (0x0203)
RP SWREV: B:3 K:0 S:1

Maybe the TWRP Log helps: There are errors in writing, is there something missing? It is the original firmware, with the newest TWRP and SuperSU installed. Still stuck on Samsung (animated) logo.

Listen do you have windows on ur mac i use parallels
but do you have windows anyhoe
Sent from my SM-N920G using Tapatalk

Same here
Hello,
I'm quite new here, but not with flashing.
My son got an S6 Edge plus too, with almost the same problem.
I tried also almost anything, the last few days.
ADB sideload, Odin several versions.
It started out with FRP lock.
After I tried al I could find I think it bricked.
And now it is in the state as described above.
Only first screen and draining the battery if not in download mode.
And when I put it on USB cable it says: "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
But Smart Switch doesn't recognise the phone!
I can however get the phone in download mode by pushing vol. down, power and home and then vol up.
But in Odin only works: Pit, CP and CSC.
With AP and BL I get errors and fails.
Please help?

For me AP and BL works with Odin. I am a step furhter now. First I flashed with the option: Erase All Nand. Then I installed TWRP and a made a repair for the System and the Caches partitions. With SuperSU installed, and the caches wiped (manual, dalvik and normal caches), it says "Android is starting, Optimizing Apps" and then "Androis is starting, Starting Apps" on a blue screen and when it loads to the end, it is stuck there.
.You get only the first Samsung S6 Edge+ Screen? Then the system files are missing, there is no OS to start (flashed with AP in Odin). Your flash problem sound quite strange. Did you test another cable?
If you want to do it with Smart Switch, the phone should be in download mode. I also had to try it several times. Did you installed the drivers?
@ KatariaMax: I have Windows and Mac PCs, no Parallels. Does it work with Parallels?

So, one problem less. With the Audax rom and kernel, the phone charges normally (but not with Quickcharge), so I don't have to put the phone to download mode. But here is the same problem, after "starting apps" it is stuck. I will do a log from the install, maybe this helps.

@ HugoGroot: Maybe the second post could be the solution for you: http://forum.xda-developers.com/galaxy-s6/help/s6-bricked-t3497687

I read about Sony devices, which are in a bootloop because of the battery. Could this be possible also for Samsung devices? I have bought a battery, just to be sure. Any other suggestions?
I found the problem here: https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Continuous-Restart-and-Optimizing-Apps/td-p/1020656

I killed my phone please help

Hi all !
I have a Samsung A8 (model SM-A800F) which was working great. I ran Kingo Root to try to install Youtube ad free. The next time I restarted it, it didn't load, and restarted in an endless loop to where "Samsung" logo appears (then restarted again). I booted into System Recovery and chose to reset to factory, but it didn't help. Then I tried flash it using Odin in Download mode. I installed the Windows drivers, downloaded the 6.0.1 firmware for Vietnam (where it was purchased), loaded the file into the AP field, and once verified clicked Start. The progress was frozen when reaching mid-way every time I tried, until it said "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software"...
I downloaded Smart Switch and installed in Windows, but the drivers were not able to install correctly, and failed on the component referring to the ID or something... while Modem driver was installed correctly and the phone appeared in Device Manager. Smart Switch didn't recognize my phone and said "unsupported device".
Now I cannot get the phone stay constantly ON, and the screen shuts down and loads in an endless loop, to the "Error occured" screen... When trying to boot to the ODIN Download page, it loads, I press UP for Continue, and then it again shuts down and loads to "Error Occured".
I tried to charge over night but it didn't help. It does the same thing when the phone is connected to the charger...
However it seems that by IMEI it is sill under warranty. I'm not sure if I voided it :/
Here's what the Download mode page says:
ODIN MODE
PRODUCT NAME: SM-A800F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FAP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 0
AP_SWREV: 1
Would appreciate any help, this phone is almost new but now it's dead :/

have u try use kise to repair ur phone

Hi,
I solved it, see this thread:
https://forum.xda-developers.com/ga...lease-help-t3622059/post72699428#post72699428

Thread closed, this is a duplicate of this one: https://forum.xda-developers.com/samsung-a-series/help/killed-phone-warranty-please-help-t3622059
Wood Man
Forum Moderator