I rooted the phone, then i downloaded the cyanogemMod. I went to the clockwork recovery and choose the .zip. It said that it was complet after some minutes and now i cant boot. Please, i tried searching in the forum but i didnt find anything that helped me. I dont know if which key i have to press to enter the recovery in the boot process. Tks a lot for the help.
[edit] I managed to enter the recovery of the android. But nothing helps. I try to "apply ypdate fromm sdcard" but it says that failed to verify whole-file signature.[/edit]
When a file has failed to verify, one of the answers is that the phone is not rooted. Maybe you have lost root due to flashing. The update.zip is usually the cwm itself. Did you use Odin at first? Go to samfirmware.com and download your rom there. Make sure it's for your country. Install via Odin. You will have stock rom and kernel. Get back to me when you have done that
Adrian.
SGS2 9100
Lite'nin rom
XDA Pro.
Try to get into download mode and reflash stock firmware using ODIN.
You will find all the instructions in the Android dev forum here in the S2 forum.
You can get into download mode by pressing volume down + home + power.
Best,
Sebkinne
For me deleting use cache helped via recovery. I refereed to this http://forum.xda-developers.com/showthread.php?t=1108499
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Good night guys, so there's my problem:
I was on DN 0.6.1 custom ROM, TWRP 3.0.2.0 and rooted. Today, i wanted to go back to stock ROM, so, I downloaded the stock firmware throught sammobile, and tried to install it throught ODIN 3.11, but it's stopped at system.img, and remained stuck in it for a long time. so i decided to restart the phone..
Then it's showed the follow message:
firmware upgrade encountered an issue note 4. Please select recovery mode on kies and try again.
So, i tried to re-flash throught ODIN, but stucked at system.img again, after it, I downloaded KIES and tried restore it, but it's stopped at 2%.
I wasn't abble to go to recovery mode, only download mode, so, i extracted the ROM file, and flashed only the boot.img through ODIN. Now it's boot to recovery...
I wiped data/cache, but the following error showed up:
E: Failed to mount system (invalid argument).
and now i can't find a solution for it.. tried to do amost anything that i could find on the internet, but none solved my problem...
I'm wanting to flash PIT + CSC + PDA file, using the repartition option on ODIN, but i'm afraid that may brick my phone for ever...
I'm following this tutorial by now: http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
And i need this CSC file, because my phone is the C version, could someone give me link to download it ? couldn't find in any place.
ANd there's someone who could help me ? i'm very concerned about it because i don't have money to buy another phone at the moment...
Thanks, and yes, already looked at XDA for a answer but couldn't fine any.
THANK YOU :good:
Anyone ?
Before this issue happens i try to root my phone using King Root that i download from kingrootapk.com. After i run that apps my phone died. I try to switch on so many time but didnt work. I download stock ROM from firmwarefile.com for my phone version and run the Odin v 1.85.,.it detect my phone but failed to flash that stock ROM ...Please someone help me.
HELLO... your grand2 is softbricked
i can help you!!!
do this:
A.YOU NEED:
1. a windows os
2.your phone
3. download this stock prerooted https://www.androidfilehost.com/?fid=23329332407574426?fid=23329332407574426
4. download odin 3.09 http://www.devfiles.co/download/CAHmXM6c/Odin_v3.09.zip
5. YOU(lol)
B.1.switch your phone download mode ( power+volume down+home)
2. extract odin and stock prerooted
3. open odin 3.09 select pda or ap and select the extracted stock prerooted (NOT the .zip)
4.connect your phone and you will see in odin on upper right corner @[0:] or something like it means your phone connected
5.now press start and wait
6.let the phone boot alone(if it bootloop open recovery and wipe)
7.CONGRATULATIONS
8. you can open settings and see you baseband version and download the official stock
dont forget to press THANKS
Hi Guys,
today I wanted to flash the latest Stock ROM for my device via ODIN. I've done this many times before and (thought) I knew what I was doing. It is my third Phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly I wasn't aware that this particular device was locked.
After downloading the international firmware I tried to install it and ODIN got stuck while writing the system.img. After that my phone did not boot up (of course). After that I downloaded and tried to isntall the firmware of the carrier, but I had the exact same issue. When I turn my device on I get to an error screen which tells me to execute an "emergency recovery" via the Samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
FRP hinders me to install a custom recovery and the stock one does not allow any isntallations via ADB or SD card.
My qustion is: Does anyone know how I can install a rom from here?
I know that I had to have made some changes prior to the flashing, but as I said I was not aware and an Idiot for not double checking.
Since it is not bricked yet I suppose there must be an answer but I can't find anything.
Thanks in advance
Edit:
After only installing the stock bootloader, I am autmaticly entering it when I boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Fix
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
fabivons said:
hi guys,
today i wanted to flash the latest stock rom for my device via odin. I've done this many times before and (thought) i knew what i was doing. It is my third phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly i wasn't aware that this particular device was locked.
After downloading the international firmware i tried to install it and odin got stuck while writing the system.img. After that my phone did not boot up (of course). After that i downloaded and tried to isntall the firmware of the carrier, but i had the exact same issue. When i turn my device on i get to an error screen which tells me to execute an "emergency recovery" via the samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
Frp hinders me to install a custom recovery and the stock one does not allow any isntallations via adb or sd card.
My qustion is: Does anyone know how i can install a rom from here?
I know that i had to have made some changes prior to the flashing, but as i said i was not aware and an idiot for not double checking.
Since it is not bricked yet i suppose there must be an answer but i can't find anything.
Thanks in advance
edit:
After only installing the stock bootloader, i am autmaticly entering it when i boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Click to expand...
Click to collapse
have u solved your problem ? This problem i am facing on the s7edge nougat ? Plz help ?
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might be worth a try!
Good luck!
Fabivons said:
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might me worth a try!
Good luck!
Click to expand...
Click to collapse
y i have done that and the device boots up but some applications force close and when i insert the memory card , the phone gets restarted everytime
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Tell us in detail now.
SjDU said:
Tell us in detail now.
Click to expand...
Click to collapse
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
suhaibahmad said:
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
Click to expand...
Click to collapse
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Fabivons said:
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Click to expand...
Click to collapse
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
suhaibahmad said:
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
Click to expand...
Click to collapse
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Fabivons said:
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Click to expand...
Click to collapse
thats your kindness , yes i have performed the factory reset several times from recovery , but when i trying to reset it from settings , it goes after restart to recovery with dm-verity error , then i wipe and factory reset from there
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
SjDU said:
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
Click to expand...
Click to collapse
Well FRP has to be turned off (the button in the menu is called "OEM unlock, the button has to be set to on which deactivates FRP). You don't mention using a PIT file - did you use one?