I have an Oppo find 5
I broke my screen and i had to change it
after it has been done the phone wouldn't start
it showed "touchscreen firmware blah blah"
so i tried to rescue my phone using fastboot
As i remember, i didn't enable usb debugging and the phone is not rooted
i tried flashing cwm and twrp recoveries but it's not working
when i push vol down and power buttons, the oppo logo appears and after a while it goes to recovery mod but only for a few seconds
then it reboots
what should i do
by the way there is no OS on the sd
You need to buy another touch screen digitizer from www.aliexpress.com maybe... replace it and see...
You see this message "Touch screen firmware is in progress" because all the find 5 digitizers stops working when they are broken.
Related
I was running Cyanogen 6.1 on my HTC Dream fine, after that i decided for full downgrade. So i searched google for it and found the cyanogen wiki for doing it. I followed each step and after flashing DREAIMG.NBH to my phone, it restarted. And so it entered a boot loop. I took off the batery and then tried to enter recovery or the bootloader.When powering the phone normally, i see the T-Mobile logo, and after that, the screen turns black. Whenever i try Camera + Power, after the logo it goes to black screen. Home + Power points the same thing and so does back + power. Fastboot doesn't seem to work even though i have all drivers properly installed and the Android ADB Device shows under Device Manager.
I know i messed up because i didn't wipe before the downgrade. If there is any possibility to repair it? If so..what is to be done?
Thank you in advance!
Hello I am trying to fix a friend nexus 7 first gen
the problem is that it keeps flashing the white google logo like its boot looping , the system doesn't even seem to be restarting just a flash on flash off google logo , no nexus logo or anything else at all.
I cannot get into recovery it will just shutoff everytime i try even from the bootloader menu
tablet doesn't have debugging mode on so only thing I can do is work via fastboot
already tried to flash like 5 different versions of android and everytime it finish (succesfully) and goes to restart it just keep doing the same on the google screen.
any help is greatly appriciated, and I have been searching all around the internet for hours now and have seen many solutions to bootlooping which I have pratice before on many of my other android devices but nothing like this problem.
thank you and pardon my english.
When you turn on the tablet with the power button and the screen's backlit turns up, press the VolDown button. This way you can boot into bootloader and flash a factory image provided by Google.
yup like I said before I did got into bootloader and flashed factory stock images like 10 times now and still having the same problem, this is what i usually do when I get into bootloops with any other android device but for some reason this time is different.
its not idle at google and I dont even get to see the nexus logo it just shows the google logo for one second and screen goes black then again the google logo and black screen like infinite restarts with one second delay.
Then it maybe hardware related (corrupted nand/partition/etc) so you might consider to send it to Asus/Google to repair.
Hi,
I have a N4 that was new but the screen cracked on it and eventually the battery died as well (wouldent hold a charge). I got the battery and screen replaced but as soon as this happened I could not boot into any rom. I had twrp installed but everytime I tried to install a rom such as CM it would install but would stay stuck in the boot loader. I then used NRT to try and kick it out of bootloader and I tried several different stock firmwares, 5.01, 4.4.4, and 4.2. The only rom that was able to get past the boot animation was 4.2 it went to the welcome screen to choose a language but I could not select anything via touch screen. In that screen I could lower and raise the volume via the rockers and turn the screen on and off. I had twrp installed and the touchscreen worked fine in twrp. I also tried this: http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060 and it also let me get into the developer firmware but of course it is encrypted so I could do nothing. The phone has not had contact with water etc. Do I have any other options? Can I get some type of diagnostic such as logcat or something?
Thanks!
So I tried to put cyanogenmod in my zenfone 2 and it gave error, so I couldn't boot it anymore, it said invalid boot image. So I figured just return back to stock, why not?
So I got like the stock recovery and installed it from adb, and installed the firmware from the official asus site, but a lot of firmwares didn't work out, I got the same version that said in the adb error when I tried installing a new firmware and I just said that it couldn't read the file. So after a lot ot tries I finally got a firmware that installed 100% correctly and I clicked to reboot the system in the recovery mode but my cellphone just won't boot, or go to fastboot mode or recovery, like, if I press power a long time, the cellphone vibrates, but if I hold power volume up, the cellphone reloads and vibrates as well, but it just keeps stuck in the ASUS in search of incredible scream, and it won't start, like, it's been here four five hours and just won't start. I figured I ask for help here so, can anyone help me?
Hi Guys,
I got my G2 back from my brother who have not using it for a while.
1st day it was working. I plan to install Lineage or custom ROM today...thats when the issue start:
1: it wont go to recovery mode. Even thou I have rooted and install latest TWRP it will only boot to Hardware control key screen, only this screen and wont boot to the OS it will be stuck on LG logo forever....
2: tried to go to Download mode....the same It will go to the same hardware control key only....
3: when I plug in to my PC it wont turn off, keep on restarting after I press the power button for a while.... only if no cable connected I can totally turn it off...
For a noob like me....looks like my G2 D802 is brick :crying: ...any suggestion?
PS: windows detect it( As below picture ), off at all when I plug in AC.....It Will just show the LG logo and the LED just flashing non stop until I pull out the cable and turn it off...
This is what shown on the laptop No Disk1/2/3/4/5 of sort showing on the Device Manager and on the phone each time I try to go recovery or download mode belowh happen:
https://flic.kr/p/QH2HzE
https://flic.kr/p/2bs67ne
Update 1: I found out why the phone was brick. Seems like my Brother ask his friend to install Lineage 15.1 on the it. After everything is verified ok. He wipe and try to flash the rom in TWRP but.....it failed and suddenly just freeze and turn off the screen. Maybe bad ROM download or some step miss....so now the Phone has NO OS and would not boot to anything only the Hardware Key Management....that's all....help? Need the phone as 2nd phone for company lines....dont wanna take the iPhone 6 from my boss....
help?