Related
Please, its been about a month since the earpiece on my wizard died and i can't find the part anywhere! I found one damaged wizard on ebay which sold for $400 with a damaged screen! obviously a fradulent buyer but the seller hasn't replied yet.
So if your wizard is water damaged, smashed, or simply inoperable i need this one part to fix my earpiece. Also my brothers wizard's speakers are blown so it'd be great if i could get a hold of those two.
What i need is the ribbon cable which connected the main board to the top sliding half of the device. Its a ribbon cable attached to a circuit board on both ends.
Please i really need this so i can bring the phone part of my wizard back to life.
PM me if you know where i can get this part or if you have a damaged wizard.
Thanks in advance!
broken wizard!
i do have a working one with cracked screen. where are you located?
i should have mentioned that.. I'm in austin, texas. If u are over seas i can check to see if i can make it elligible for a corporate rate to ship it to me.
Also how much would u be wanted for it?
I'd offer you mine, but I got the same thing broken.
i just emailed 2 sellers on ebay which have cellphone parts and wizard housings in there stores, awaiting there reply. And i'm working something out with the one person with a damaged one from ebay.
What do you guys think $85 good for a wizard with a damaged screen?
broken wizard
I have a broken wizard--I dropped it, but I can still make calls from it via the bluetooth headset.
PM me if you are interested and I'll give you my phone #.
I've pm'd u, but does that mean your earpiece is broken as well? Cuz what i need is the ribbon cable that powers the earpiece, LCD, digitizer, softkeys, and everything else on the front half of the device. So if yours is broken then probably won't help mine out much.
i guess so. If you need an intact (front) then mine won't help--due to the fact that the "cal answer/hangup " buttons do not work.
The damaged one i bought off ebay came in today, swapped the parts out and now my earpiece is working again!! i'm so excited!!
Now i have all these parts lying around if anyone needs anything send them my way. The parts i got are:
The main board
Camera
Vibrator
Main housing (except for the front its really banged up)
Antenna
Keyboard
But no battery cover, didn't come with one.
Heres a pic of the mess i had on my desk but it all worked out perfectly
--------------------------------------------------------------------------------------------
I no longer have the damaged wizard so please don't PM asking for parts.
hey fone_fanatic, wondering if you ever experienced your Wizard creaking when you press down on the front faceplate(below the call/end buttons)....seems to come from the hinge right under the the right soft key (the one connected to the keyboard), only thing is it only makes noise when the keyboard is closed and my keyboard is not loose at all(nice and snug)....just wanted to know if you might know of a fix for my problem, would you recommend me taking it apart or just sending it in for a warranty repair or do you know if it is pretty easy to somehow shorten the gap between the front face and the keyboard?.... appreciate the time.
Regards,
P.S. My Wizard works fine, its just starting to get very annoying when I make/end phone calls.
no, mine doesn't make any noise when i press down there. well there is a noise but its coming from the battery cover. if your device is under warranty, i suggest sending it in if it bothers you that much. the reason being because when u open it up your bound to break a couple of clips which might make it worse.
fone_fanatic: I love that mess on your desk
You might want to mask out your First National Card though - edge detection filters would love that image...
V
don't worry about the card, its one of those advertisement cards you get in the mail syaing your pre-approved or whatever. i always keep those cards and use them with taking devices apart.
fro the broken units
check out this site they repair and sell repair parts
http://www.pocketpctechs.com/main~u...essories-Stylus+-+Enhanced~item~IMT-LCD03.htm
anyone got a 8125 with a cracked LCD but all other functions still working?
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
@ fone_fanatic
thanks for the advice....off to warranty it goes...hope it comes back with no new problems (fingers tightly crossed)....
Regards,
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
fone_fanatic said:
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
Click to expand...
Click to collapse
... wait for the next thing to break? :lol:
tonydt1g3r said:
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
Click to expand...
Click to collapse
The reason i bought it the this one with the damaged lcd is because i couldn't find the part i needed (Rigid Flex Board) anywhere so i swapped my broken one out with this one. So if i was to put this back together not only would the lcd be busted but the earpiece won't work also the speakers would be blown (sold good speakers to a friend). Also the front case is heavily scratched/dinged, looks like someone smashed a brick on the phone.
hi all,
today i suddenly dropped my hd2 during my daily commuting out of my shirt pocket when i bent doen to pick sumthing up...even thgh it was in the pouch,,,the inside lcd screen developed a long crack across the upper face ..thgh it is visble only on dark screen prominently..
worse is the touch functions have suddenly stopped responding..i can not access my phien features by touch as nothing happens..
screen is stuck in unlock screen..cannot slide across to unock
tried soft/hard reset, practically everthing
its just 20 days old for gods sake,,wh culd be the matter
I feel for you ... is it insured?
no..will warranty cover that,,the i can recive phone calls fine....thru buttons only...is there any way to remove that lock screen so at least i can access function thru keys
Even so, you can't do much with those buttons alone. But sounds like you only broke the digitizer. It costs much lesser than the LCD. You may want to try fix it yourself.
Sorry to hear this chap. If it's not insured (I don't understand why if it's not) then your best bet is to send it back to HTC to get it repaired.
You must be gutted.
WB
ya,,,,gave back to the dealer for repairing...how do i know whter its digitiser or inner lcd broken..i mean he might repair digitizer and charge me for lcd screen..unfortunately here in india no insurance facilty for mobiles...no idea how long it will take to get repaired
how can it get cracked..i was sitting when it fell from my lap ,was in the pouch..surpisgly outer glass did not break and inner lcd broke
shuld serve as warning to all here on forum to take care and opt for sum hard case
Can you share a pic of how ur hd2 looks now?
Good luck!
dheerpat said:
ya,,,,gave back to the dealer for repairing...how do i know whter its digitiser or inner lcd broken..i mean he might repair digitizer and charge me for lcd screen..unfortunately here in india no insurance facilty for mobiles...no idea how long it will take to get repaired
how can it get cracked..i was sitting when it fell from my lap ,was in the pouch..surpisgly outer glass did not break and inner lcd broke
shuld serve as warning to all here on forum to take care and opt for sum hard case
Click to expand...
Click to collapse
You can Insure your phone my friend.. check this
http://newindia.co.in/per-mobile.asp
From what I know..
National Insurance Company, Oriental Insurance Company, New India Assurance Company and United India Insurance Company cover mobile phone insurance. They fix compensation equivalent to cost of replacement by new mobile of same specifications and capacity, including all taxes and duties.
Hope this helps..
From a fellow Indian
hi all..my dealer says he had forwarded hd2 to htc service center and since its a new model the screen replacement is not avalible..he said they quoted estimated price of 20 thousand for the screen.obnoxious..thts 400 dollars!!!
i searched ebay and found digisters selling for about 60 dollars..
my question is shuld i go ahead and buy .what is exctly a digitiser ,,
i dont want to find out after spending the money that its not a digitser problem,,is there nyway to acertain its digitser proble..i no more trust my dealer
400 dollars? that is half a hd2.
the upper layer of the screen is afaik the digitizer.
touchscreen is built of two elements. the lcd and the digitizer.
the digitizer is for handling touch. that may be the part which cracked and is not responding now.
however I am not sure if it's easy to replace the digitizer since you must seperate the lcd and digitizer which are tied closely together. maybe someone experienced here on xda knows how.
ummmm..so u mean basicslly there are 3 components
1..outer most glass which we touch pysically
2..digitser which is embeded on
3 lcd screen
is the digitiser made up of plastic material which is crackable or in my case lcd whihc is 3rd layer has cracked while digitser is intact
unfortunatly cannt post snaps as the instrument is with dealer..
Well so it was sad day (for my friend)
Battery ran out, and phone was turned off for while.
He charged it and ........WTF.
The screen dosent respond to any touch inputs.
It just quit working.
Please help me find one digitizer for cheap!
is it just the digitizer or i also require lcd or .....whtvr.
thnx.
I bought just the digitizer from amazon... And i might retirn itcand get the combo lcd+digitizer. Seems much easier to do.
Sent from my SGH-T959V using Tapatalk
it would be
It will be much easier to do them both at the same time how ever it is possible to just do the digitizer. I tried this with mine a while back and ended up cracking the LCD because i didn't want to wait to use the heat to separate the LCD from the digitizer. They are glued together. It is doable, just BE VERY CAREFUL.
I got mine from ebay and it fit and looked perfect. There are quite a few sites that offer replacements for good price.
http://www.repairsuniverse.com/
http://www.ebay.com/sch/i.html?_fro...=htc+hd2+lcd+screen&_sacat=See-All-Categories
So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be
http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1
Sent from my Nexus 4 using Tapatalk 2
Judging from ifixit, it's going to be pretty hard to replace the screen. Would you mind keeping us updated on your progress here? I'm curious to see how hard it's going to be.
The glass is fused to both the display and the display frame. So don't crack the glass unless you're good with a heat gun, or you're fond of replacing the glass, display, and frame together ($$$).
Click to expand...
Click to collapse
- iFixit.
Yeah, I think it might be a bit of a challenge. Please tell us how it goes though.
i think he ordered the whole glass/screen/digitizer fused together thing, which shouldnt be as hard to replace ( i hope). Anyways, please do keep us updated.
Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium
speedygonzo said:
Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
At least you get a new battery too, but that' s expensive :crying:
Bump...
Sent from my Nexus 4 using xda premium
I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..
vikramkhalsa said:
I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..
Click to expand...
Click to collapse
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?
When you sent the phone to LG was it overseas or in the US? Also whats the website? thanks
neotekz said:
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?
Click to expand...
Click to collapse
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself
speedygonzo said:
So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be
Click to expand...
Click to collapse
Thanks buddy,
The same happened to me. But unfortunately i'm located in India.. Is it possible to purchase this Display assembly from India..
I'm really worried..
Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.
Battery bending under removal
I'm also sorry to have to reply to an old thread, but I am in urgent need of an answer.
I recently cracked my phone's screen. I ordered a screen+frame repair kit, and got repairing. However, when removing the battery, When prying it from the phone, I realized that the battery was soft, and my tool I was using to pry it off was actually bending it. The battery seems to be curved overall, and slightly pushed on some edges. Also, a weird "sweet" smell came from the phone. Perhaps the smell is the adhesive that sticks the battery to the phone; I do not know.
Will it be safe to use the same battery again? Or should I go ahead and purchase a new one?
Wouldn't a hair dryer work as an alternative heat gun
gravityz3r0 said:
Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.
Click to expand...
Click to collapse
I wouldn't recommend doing so as a LCD+digitizer assembly cists around $60USD I did not think its worth seperating them but you can use a hairdryer to soften the adhesive
Sent from my SM-T310 using XDA Premium 4 mobile app
---------- Post added at 01:14 PM ---------- Previous post was at 01:12 PM ----------
jchidori said:
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself
Click to expand...
Click to collapse
Use a hairdryer
Sent from my SM-T310 using XDA Premium 4 mobile app
I Received a Phone that was slammed on the ground top part of phone was bent.. Screen cracked and wont turn on ..front camera and proximity sensor broken also...
Purchase new lcd and digitizer and installed it and phone still will wont come on...
Is there a way i can check if the motherboard is dead???
Is think the motherboard is still working when the PC recognises your phone. Not sure, but I think I'm right! At least worth a try
Sent from my GT-I9505 using Tapatalk 4