Database Users

Wifi 802.11n 5Ghz working for anyone?

I found the option in the settings where the band can be forced to 2.4, 5 or Auto. On either Auto or 5 the N4 doesn't "see" my 802.11n router (other clients are connected to it just fine). Only b/n/g seems to work for me. The router is a Linksys E3000 running DD-WRT if that matters.
Anyone else?

Well, the Nexus 4 doesn't support 802.11a (see wikipedia etc.)
But 802.11n at 5 Ghz should work.

infoflo said:
Well, the Nexus 4 doesn't support 802.11a (see wikipedia etc.)
But 802.11n at 5 Ghz should work.
Click to expand...
Click to collapse
Actually, it does.
Wireless RF Module - Atheros WCN3660
Quote:
Manufacturer: Qualcomm
Bluetooth: BT 3.0/4.0 Low Energy
Wi-Fi: 802.11 a/b/g/n (2.4/5 GHz)
FM: Hardware supported

I don't have wireless A, but one thing to try. Is your 5ghz and 2.4ghz broadcasts named the same? For instance on my wireless N setup I have the router broadcast ROUTER5 and ROUTER2.4 so I can specify which band to connect to. This has eliminated a lot of trouble of my wireless devices not choosing 5ghz when I want them to. So my Nexus4 just connects to ROUTER 5 and I know it is 5ghz.
jasonwc said:
Actually, it does.
Wireless RF Module - Atheros WCN3660
Quote:
Manufacturer: Qualcomm
Bluetooth: BT 3.0/4.0 Low Energy
Wi-Fi: 802.11 a/b/g/n (2.4/5 GHz)
FM: Hardware supported
Click to expand...
Click to collapse

The SSIDs are different for "5" and "2.4" for exactly the reason you mentioned. But no matter what I can't see the "5" SSID from the N4, while either wifi clients can see both at the same time. The router support simultaneous 2.4 and 5.

Yes. 5Ghz works.
I use it in my house. I'm on it right now with my N4.
Check the security on your router.
You should have a WPA2/PSK AES encryption or leave your network open.
You'll also want to verify your router is broadcasting.
Since your router was flashed with DD-WRT, verify you are in mixed mode or some sort of N G combo.

Thanks for confirmation. It's strange that the phone doesn't even see the router at all, I tried various mixed modes, channels, SSID broadcast is enabled, etc. Other clients have no problems with the router.

I haven't tried this yet, but from reading other reports it may be the case that the N4 (and the N10) only support the 5Ghz band with 20Mhz channels, not 40Mhz. My router is configured to use 40Mhz only so that might explain why the N4 cannot "see" it.
http://www.dd-wrt.com/wiki/index.php/Wireless-N_Configuration#20MHz_vs_40MHz

running my Nexus 4 on 5GHz N mode on a Linksys EA6500. My channel width is set to auto so maybe that is why it can be seen and used.
General question though, why have you chosen to use 802.11a anyway? What benefits are there? (honestly curious)

Sort of off topic, but who the crud uses 802.11a?
Sent from my Nexus 4 using xda app-developers app

DarkRyoushii said:
General question though, why have you chosen to use 802.11a anyway? What benefits are there? (honestly curious)
Click to expand...
Click to collapse
The subject of my topic is wrong. It should have said 802.11n on the 5Ghz band, not 802.11a. I edited the subject now.
I prefer 5Ghz when possible because I seem to be the only AP on that band whereas 2.4Ghz is crowded.

sirxdroid said:
I found the option in the settings where the band can be forced to 2.4, 5 or Auto. On either Auto or 5 the N4 doesn't "see" my 802.11n router (other clients are connected to it just fine). Only b/n/g seems to work for me. The router is a Linksys E3000 running DD-WRT if that matters.
Anyone else?
Click to expand...
Click to collapse
I have the same router with DDWRT also and my N4 cannot see my n router either. I will look into the band settings tonight.

Just chiming in, Linksys E3000, DDWRT and my 5Ghz network works like a charm

5Ghz works for me just fine.

still having wifi issues, wddrt flashed firmware(iv'e tried all settings) wasted 24hours i think trying to figure it out, solid connection but wifi seems broken, can't download stuff but can browse google playstore
my other wifi devices have NO ISSUES at all with this router
cannot run speedtest, can only run ONE certain type of texting app(strange) others won't connect online
its like my n4 has a 'firewall' or something
seems my best option is to pick BG-MIXED mode! alot mor apps connecting to the internet now but not all! at least im getting progress

sirxdroid said:
I found the option in the settings where the band can be forced to 2.4, 5 or Auto. On either Auto or 5 the N4 doesn't "see" my 802.11n router (other clients are connected to it just fine). Only b/n/g seems to work for me. The router is a Linksys E3000 running DD-WRT if that matters.
Anyone else?
Click to expand...
Click to collapse
Change your channel to 40 or 48. Mine didn't work before but after changing my AP channel to 48, my N4 can see the 5GHz AP now.

junks2010 said:
Change your channel to 40 or 48. Mine didn't work before but after changing my AP channel to 48, my N4 can see the 5GHz AP now.
Click to expand...
Click to collapse
Changing my AP's channel to 48 from 40 seemed to work for me. My Nexus 4 can now see my 5GHz AP.
Thanks!

lamb_1234 said:
Changing my AP's channel to 48 from 40 seemed to work for me. My Nexus 4 can now see my 5GHz AP.
Thanks!
Click to expand...
Click to collapse
Thanks alot ! I had this exact problem with my Tomato-flashed Linksys E3000. I changed the channel of 5ghz from Auto to 48 and voila, Nexus 4 is now cruising happily.
Before, my Nexus 4 did not even detect my wifi N 5ghz AP while all my other devices could. The strange thing is my Nexus could see my neighbors' 5ghz APs but just not mine.

utes said:
Thanks alot ! I had this exact problem with my Tomato-flashed Linksys E3000. I changed the channel of 5ghz from Auto to 48 and voila, Nexus 4 is now cruising happily.
Before, my Nexus 4 did not even detect my wifi N 5ghz AP while all my other devices could. The strange thing is my Nexus could see my neighbors' 5ghz APs but just not mine.
Click to expand...
Click to collapse
What Channel Width do you use? Auto/10/20/40 - at least these are the options in DD-WRT?
I still can't get my N4 to see my DD-WRT router's 5Ghz AP no matter what I try. I have since acquired an HTC One X+ phone and that has no problem seeing it, together with a bunch of other devices in the house, including a Chromebook. Something going on with the wifi chip and/or software in this LG N4.

Try 20mhz and a low channel like 40 or 48. Works perfect for me on dd-wrt
Sent from my Nexus 4 using xda app-developers app

[Q] Is there any solution for WiFi not connecting to certain networks

My Nexus 10 works fine on most WiFi networks, but there are a few places where it fails. The N10 sees the network which has fine signal strength. It goes to the "Connecting" state, waits 30 seconds or so, and then drops back to "Saved".
I would think the network had non-functional DHCP, but I can connect with a Lenovo notebook instantly from the same place to the same network and AP.
The router that causes the problem is a Cisco 1200 series AP, operating vanilla 802.11g, with an open network, in the 2.4 GHz band.
I have tried all the Wi-Fi-related options in the N10, and removed and recreated the connection. I have found nothing that helps.
Has anyone that has seen this issue found a solution?

timg11 said:
My Nexus 10 works fine on most WiFi networks, but there are a few places where it fails. The N10 sees the network which has fine signal strength. It goes to the "Connecting" state, waits 30 seconds or so, and then drops back to "Saved".
I would think the network had non-functional DHCP, but I can connect with a Lenovo notebook instantly from the same place to the same network and AP.
The router that causes the problem is a Cisco 1200 series AP, operating vanilla 802.11g, with an open network, in the 2.4 GHz band.
I have tried all the Wi-Fi-related options in the N10, and removed and recreated the connection. I have found nothing that helps.
Has anyone that has seen this issue found a solution?
Click to expand...
Click to collapse
Seen this a million times, and it's one of my lingering dislikes about Android (although to be fair, I've seen the analogue -- much less -- on my iPad as well). Toggling the Wi-Fi state on and off like mad (or Airplane Mode) usually does the trick for me...eventually. Have you tried rebooting the router (relatively sure you've have, sorry) or using an app like Wi-Fi Analyzer from the Play Store to see if there's any channel interference? Mobile devices don't always deal well with overlapping channel use.

Rirere said:
Seen this a million times, and it's one of my lingering dislikes about Android (although to be fair, I've seen the analogue -- much less -- on my iPad as well). Toggling the Wi-Fi state on and off like mad (or Airplane Mode) usually does the trick for me...eventually. Have you tried rebooting the router (relatively sure you've have, sorry) or using an app like Wi-Fi Analyzer from the Play Store to see if there's any channel interference? Mobile devices don't always deal well with overlapping channel use.
Click to expand...
Click to collapse
I cannot reboot the router because I have the problem in a public place (an airport). I do not have the problem with my own router.
I do use a WiFi analyzer, and there is no interference issue. The AP is on a clear channel, and the signal is very strong.
So the only and best solution it to turn Wi-Fi on an off rapidly until it works? Really?????

timg11 said:
I cannot reboot the router because I have the problem in a public place (an airport). I do not have the problem with my own router.
I do use a WiFi analyzer, and there is no interference issue. The AP is on a clear channel, and the signal is very strong.
So the only and best solution it to turn Wi-Fi on an off rapidly until it works? Really?????
Click to expand...
Click to collapse
Never said it wasn't stupid. It's possible that the airport is using a network hack to facilitate its captive portal (I assume it uses some kind of gateway?), and Android is really bad about network "misconfigurations."

Samsung G935F - wifi problem

Hi ALL,
I noticed that my My Galaxy S7 Edge's Wifi constantly keeps turning off and on for some reason! does anyone else experience this on their phone?
Thank you.

Is their any known wifi issues on Galaxy S6 Edge (international variant)?
Can anyone help.

Could you be more specific? Do you have WiFi turned on while your screen is off? Maybe post your advanced WiFi settings so we can see if there is anything off
Sent from my Nexus 6P using Tapatalk

rxk said:
Hi ALL,
I noticed that my My Galaxy S7 Edge's Wifi constantly keeps turning off and on for some reason! does anyone else experience this on their phone?
Thank you.
Click to expand...
Click to collapse
Recently it happening to me also but don't know the solution.

tin2404 said:
Recently it happening to me also but don't know the solution.
Click to expand...
Click to collapse
The following things have generally helped:
- Set DIFFERENT SSIDs for 2.4 and 5GHz bands. I have found that most devices and routers do a terrible job dynamically switching between the networks if each as the same SSID - I think the chipset recognizes the SSID and constantly jumps from one band to the other depending on which had the strongest signal.
- Disable the bluetooth and wifi SCANNING feature (not bluetooth itself as one of the prior posters cited). This setting is found in "locations" and allows your phone to scan for recognized wifi and bluetooth networks even when wifi or bluetooth is turned off to pinpoint its location. Given that bluetooth only has about a 50 ft range, its puzzling why the bluetooth scanning is even an option
- Set the channel width in the router to 20 MHz or 40MHz. Some products can't recognize the 80MHz channel widths (my old S5 couldn't recognize my travel router if I had it set to 80MHz. Note that this may slow down your connection.
- Disable Smart Network Switch (in Wifi Advanced settings) or other similar setting that dynamically switches between Wifi and mobile data depending on network access
- Get 802.11ac-capable router. This may be less of an issue now, but for a couple years after the ac standard came out, a lot of ac clients would have issues with legacy non-ac routers. Obviously not ideal.

I don't have problem with my S6 Edge connecting to my home wifi.
I tried to disable some setting as Joku suggested and it minimized the wifi connection drops. I noticed that my S7E connected most on my 2.4GHz

rxk said:
I don't have problem with my S6 Edge connecting to my home wifi.
I tried to disable some setting as Joku suggested and it minimized the wifi connection drops. I noticed that my S7E connected most on my 2.4GHz
Click to expand...
Click to collapse
same problem with my S7 Edge

Having this problem only with certain routers (other phone models stay connected just fine). The router only has 2.4 GHz, and bluetooth is off, scanning is off, smart switch is off.
Router is a Verizon FIOS Router Actiontec MI424WR-GEN3I.
US T-Mobile GS7e, on latest firmware.

WiFi unstable

WiFi is very unstable when you aren't next to the access point. It keeps switching from WiFi to data connection.
Furthermore, when gripping the phone from the upside without a cover (near the camera), the WiFi connection will not work anymore.
Someone is experiencing this problem?

same to me

WiFi works normal here... No deathgrip

Maybe you can try enabling Aggressive WLAN to Cellular handover at developer settings under the networking tab to fix your issue

alfatihrobb said:
Maybe you can try enabling Aggressive WLAN to Cellular handover at developer settings under the networking tab to fix your issue
Click to expand...
Click to collapse
Definitely this is not a solution...

jack_21 said:
WiFi is very unstable when you aren't next to the access point. It keeps switching from WiFi to data connection.
Furthermore, when gripping the phone from the upside without a cover (near the camera), the WiFi connection will not work anymore.
Someone is experiencing this problem?
Click to expand...
Click to collapse
Well, the problem in my case was that I have two access points with the same name at the two sides of the house, and from my room the second AP has a better signal, but it had some trouble and it wasn't working, so the phone wifi was switching from the first to the second continually.
However if you hold the phone from the upside, there is a very strong loss of signal. A workaround is to use a case.
I can say that wifi antennas of this phone are not that good, like the iPhone 7.
My previously Xiaomi phone had a better wifi signal on very distant access point.

jack_21 said:
Definitely this is not a solution...
Click to expand...
Click to collapse
I agree: not a solution.
I've changed ssid of 5Ghz wifi (now is different from 2.4) and wifi don't disconnect random anymore.

ohdearlord said:
I agree: not a solution.
I've changed ssid of 5Ghz wifi (now is different from 2.4) and wifi don't disconnect random anymore.
Click to expand...
Click to collapse
Yes, the same SSID on different AP / technologies makes only troubles.
Never use the same name for 2,4Ghz and 5Ghz. Unfortunately many providers have the routers that are configured this way.

jack_21 said:
Yes, the same SSID on different AP / technologies makes only troubles.
Never use the same name for 2,4Ghz and 5Ghz. Unfortunately many providers have the routers that are configured this way.
Click to expand...
Click to collapse
I've configured my router with same ssid to use band steering (i can't post link: search "band steering avm" from a search engine)
That technology do exactly the trick: switching from frequency bands, but even disabling it Mi A1 doesn't manage WiFi correctly and don't suppose to do that!

Hi Guys
Is there a solution for unstable wifi connections.
thank you

Samsung Galaxy A20 5ghz Wifi not working.

To be clear off the bad, its not the router. Every other device in the house that connects to the 5ghz band works flawlessly. This is a brand new international phone being use with AT&T in the US, calls and texts function fine. Phone is fully updated and so is the router.
Wifi however is only picks up 2.4ghz bands. Not 5ghz.
Wifi analyzers pick up 2.4ghz but when switching to 5ghz I get a messages stating my phone does not support 5ghz. Anyone else with this issue?

@aq3e No. It doesn't have 5GHz.
2.4GHz has better penetration through walls anyway.
5GHz is really only good if you're in the same room.

physwizz said:
@aq3e No. It doesn't have 5GHz.
2.4GHz has better penetration through walls anyway.
5GHz is really only good if you're in the same room.
Click to expand...
Click to collapse
The phone does 5GHz as mentioned on samsungs website : 802.11 a/b/g/n/ac 2.4+5GHz

Snekxs said:
The phone does 5GHz as mentioned on samsungs website : 802.11 a/b/g/n/ac 2.4+5GHz
Click to expand...
Click to collapse
I have dual band and can only see 2.4
Might be different in other countries.
Australia had only 2.4 as shown here.
Connectivity
ANT+
No
USB Interface
USB Type-C
USB Version
USB 2.0
Location Technology
GPS, Glonass, Beidou
Earjack
3.5mm Stereo
MHL
No
Wi-Fi
802.11 b/g/n 2.4GHz
Wi-Fi Direct
Yes
Bluetooth Version
Bluetooth v5.0 (LE up to 2 Mbps)
NFC
Yes
https://www.samsung.com/au/smartpho...-Q3bFagLE-84I8pWNocaAq5vEALw_wcB&gclsrc=aw.ds

I also dont have 5ghz and dont have the advacned wifi option to change bands... Why this model suck this much? Probably a OS stupid limitation...

rophiroth said:
I also dont have 5ghz and dont have the advacned wifi option to change bands... Why this model suck this much? Probably a OS stupid limitation...
Click to expand...
Click to collapse
5ghz is only good if you're in the same room

The A20 does support dual band, but it's disabled. I tried to enable it by replacing the mx140_wlan.hcf file located at /vendor/etc/wifi/ with the one from the A30 and it worked, but there's a problem.
For some reason the signal range is terrible, to detect a 5 GHz network the phone needs to be next to the router, if it gets some centimeters away the signal drops at the point where the network is not detected anymore.

physwizz said:
5ghz is only good if you're in the same room
Click to expand...
Click to collapse
5ghz wifi is certainly not only good in the same room, check online heatmaps of 2.4 vs 5ghz to compare, it's not a huge difference. Given how much less interference you will get on the 5ghz it often works a lot better than 2.4ghz even at longer ranges. Fix peoples internet for a living and I've seen thousands of peoples speeds double or even triple from changing to 5ghz even when router is on the first floor and they use it on the second.

FrankdonkeybrainReynolds said:
5ghz wifi is certainly not only good in the same room, check online heatmaps of 2.4 vs 5ghz to compare, it's not a huge difference. Given how much less interference you will get on the 5ghz it often works a lot better than 2.4ghz even at longer ranges. Fix peoples internet for a living and I've seen thousands of peoples speeds double or even triple from changing to 5ghz even when router is on the first floor and they use it on the second.
Click to expand...
Click to collapse
Read the article here.
It shows that 5ghz suffers from greater attenuation rates than 2.4
2.4 GHz vs. 5 GHz WiFi
Learn about when to use 2.4 GHz vs. 5 GHz WiFi with CenturyLink. The difference between these frequencies can affect your speed.
www.centurylink.com

physwizz said:
Read the article here.
It shows that 5ghz suffers from greater attenuation rates than 2.4
2.4 GHz vs. 5 GHz WiFi
Learn about when to use 2.4 GHz vs. 5 GHz WiFi with CenturyLink. The difference between these frequencies can affect your speed.
www.centurylink.com
Click to expand...
Click to collapse
(I know this doesn't help much with the OP's question but to dispel hearsay I felt it needed to be said.)
I know you don't know me, but I said I resolve peoples internet problems for a living both on supplier and consumer side and have tested this with thousands of customers but you trust a random article with very little info more and don't even bother to look at heat maps? This article has been made by someone who read a blurb about wifi, but they did get one thing right...
"A lot of electronic devices and appliances use the 2.4 GHz frequency, including microwaves, baby monitors, and garage door openers. If you have many of these in your home, or if you live in apartments or condos surrounded by other people, that 2.4 GHz band is likely to be congested, which can damage speed and signal quality."
That list is very short, it also includes lots of computer peripherals, security cameras, smart home devices, walkie talkies, radios, remote controls, wireless handsets (landlines, not mobiles) basically every wireless device you can think of uses 2.4ghz and even your microwave! all these devices on a long range signal means your neighbours devices also overlap to combine together to make the 2.4ghz band for most consumers a disaster for anything requiring more than slow speeds. This goes without even mentioning that the 2.4 ghz band only has 13 channels (3 none overlapping) to spread every wifi device out on to stop interference, in most residential are this is simply not enough. In many cases this is so bad that even next to the router people can lose 80 - 90% of their speeds or have so much interference that even loading webpages takes a long time due to the amount of data being lost.
Like I said before, even if the 5ghz DOES have shorter range, it is not so short that you have to be in the same room, what would be the point? That is a something people assume because it's a "shorter range signal" but it's not that short! the 5ghz is usually faster due to it's naturally higher data rates and more consistent due to the lack of interference from intermittent signals. Most things that interfere with 5ghz are constant and therefore it's much easier to test and know what speed you can get in other rooms away from the router, unlike the 2.4 which has the same issues with passing through anything only with a load of other issues on top too!. The 5ghz also has the advantage of having over 100 wifi channels to spread networks out on to avoid them interfering with each other, a vast upgrade to the 2.4ghz.
Here is an example of a heatmap comparing 2.4 and 5ghz but just looking at any article that goes beyond a very brief description will show you why the 2.4ghz is often so much worse than the 5ghz.
What's the Difference Between 2.4 and 5 GHz WiFi?
What do these numbers actually mean? Does it realy matter? Is one better than the other? How many questions are we going to ask in this description?
socialwifi.com
2ldr - It depends on your house and nearby networks, test both bands with different devices in different rooms and compare speeds, outside of doing more thorough testing with other apps and equipment this is the easiest and quickest way to see which will work better.

You have 2 choises use BT modem BT modem Plan A: one Device in 5GHz network one device sharing Internet from BT modem feature. +Advance use Open Garden mesh client for better Internet throught BT modem. Construction of my plan:One or two devices in 5GHz WiFi network and 3 devices creating PAN network trought Bluetooth.if Your Bluetooth version is 5.0 you can use Mesh network profile. than using Mesh network structure. Mesh Bluetooth network structure helping one device to other. but you need to know you will use 2.4GHz trought BT modem and Mesh networks.

TBM 13 said:
The A20 does support dual band, but it's disabled. I tried to enable it by replacing the mx140_wlan.hcf file located at /vendor/etc/wifi/ with the one from the A30 and it worked, but there's a problem.
For some reason the signal range is terrible, to detect a 5 GHz network the phone needs to be next to the router, if it gets some centimeters away the signal drops at the point where the network is not detected anymore.
Click to expand...
Click to collapse
I fixed this issue on crDroidAndroid-13.0-20221126-a20-v9.0 by copying both mx140_wlan.hcf and mx140.bin taken from this a30 git. Works great on my a20.

shammoi said:
I fixed this issue on crDroidAndroid-13.0-20221126-a20-v9.0 by copying both mx140_wlan.hcf and mx140.bin taken from this a30 git. Works great on my a20.
Click to expand...
Click to collapse
Interesting. What's your A20 model? I believe I also tried to do that, but I'm going to retry it.

Done it on a SM-A205W.

shammoi said:
Done it on a SM-A205W.
Click to expand...
Click to collapse
No luck. I still have the signal issue

Do it again in the following order maybe ?
1. Download both mx140_wlan.hcf and mx140.bin from the git I gave you above.
2. Turn your wifi off.
3. Reach /vendor/etc/wifi folder using your favorite file browser ( Mine is Mixplorer ).
4. Overwrite both files.
5. Reboot your device.
6. Turn Wifi back on.
7. Do a Wifi speed test ( Wi-Fi Sweetspots app for me ).

shammoi said:
Do it again in the following order maybe ?
1. Download both mx140_wlan.hcf and mx140.bin from the git I gave you above.
2. Turn your wifi off.
3. Reach /vendor/etc/wifi folder using your favorite file browser ( Mine is Mixplorer ).
4. Overwrite both files.
5. Reboot your device.
6. Turn Wifi back on.
7. Do a Wifi speed test ( Wi-Fi Sweetspots app for me ).
Click to expand...
Click to collapse
I use a Magisk Module instead of directly overwriting the files, but this should make no difference. I believe it may be a hardware difference between our devices. On the schematics the 5GHz antenna seems to be marked as optional, maybe that has something to do.
I tried to put my device next to the router, and when I did it the network got detected (with bad signal tough), I could connect and the download speed oscillated between ~50-200 mbps (my network has 300 mbps). Once I moved further from it, the WiFi disconnected as the signal was lost.