My buddy just gave me an s5 and the led under the back arrow button doesn't light up
does anyone know which part to order that has the leds on it
I tried looking at pics but was hard to tell, I believe it is the charger port daughterboard but want to be 100% before ordering and opening the phone
thanks
R u using any custom rom ?since in certain custom rom
dev may block led to glow.check that before u buy new one. If u feel u don't want to waste the money just add on screen navigation buttons
Sent from my E39
No the phone is stock 5.0 and was factory reset
the chrome bezel is a little banged up in that corner which may lead to the led going out but I'm going to replace the midframe and want to fix the led as well
BTW the left led works just not the right one so I believe it's a hardware issue
It's a hardware issue u need to replace..
https://www.ifixit.com/Device/Samsung_Galaxy_S5
Sent from my E39
---------- Post added at 01:20 PM ---------- Previous post was at 01:10 PM ----------
It's definitely digitizer problem u need to replace hardware.
Sent from my E39
The digitizer? The button works just not the white led under it.
No other choice u need to replace entire digitizer
Sent from my E39
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
m.ebay.com/itm/LCD-Screen-Digitizer-for-Samsung-Galaxy-S5-i9600-G900A-G900T-G900V-G900P-Black-/351076533671
Or else change it from any dead phone.
Sent from my E39
Related
My homebutton will sometimes double click when I just click once, which makes the carkit menu come up. This will happen like once a day. Anyway to resolve this?
mine kept doing this, drove me mad!i just disabled the button altogether , job done lol
Is there a fix beside that?
Sent from my GT-I9100 using xda premium
get it replaced
Same problem here. And i cant get it replaced where i live :-(
Sent from my Galaxy SII
I had the same issue. Seems like the home button isnt the best built like the iPhone.
I had mine replaced by a whole new front panel (Included a new screen as well, which was good since I had 1 dead pixel)
Best bet is to get it replaced.
how's the new screen treating you? I need to get mine replaced because of blotches and lines, =(
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
how's the new screen treating you? I need to get mine replaced because of blotches and lines, =(
dhruvmalik said:
I had the same issue. Seems like the home button isnt the best built like the iPhone.
I had mine replaced by a whole new front panel (Included a new screen as well, which was good since I had 1 dead pixel)
Best bet is to get it replaced.
Click to expand...
Click to collapse
I have a stain
ceycey84x said:
I have a stain
Click to expand...
Click to collapse
bit of aerial will sort that out mate
Yup I've had this issue since day one.
Sent from my GT-I9100 using xda premium
SAlmighty said:
how's the new screen treating you? I need to get mine replaced because of blotches and lines, =(
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
how's the new screen treating you? I need to get mine replaced because of blotches and lines, =(
Click to expand...
Click to collapse
The new screen is working just fine (knock on wood). Although its not as bright as my original screen at the same brightness level setting. But thats a very small marginal difference.
My home button is still doing this. Should I return my phone to get it replaced?..
Just figured out that I still had the plastic on the home button never knew it was there before because it is really hard to see. I but I peeled it off and my home button is a lot better now. I suggest anyone else having problems and doesn't realize it is there to peel it off.
Sent from my Galaxy SII
Mine does this every once in a while, not enough for it to be a real problem though. The thing that's more annoying is when my back button double backs. I have to be real careful with it.
it really annoys me that you can't disable this 'feature'. Forced me to root to get rid of it.
I've taken over replacing a screen on a DX from someone who said, "a part fell out" and he doesn't know from where.
I've assembled the phone, and the buttons light up but the screen doesn't.
Anyone know where this piece (front and back pix) should go and if it's the missing link?
pmgreen said:
I've taken over replacing a screen on a DX from someone who said, "a part fell out" and he doesn't know from where.
I've assembled the phone, and the buttons light up but the screen doesn't.
Anyone know where this piece (front and back pix) should go and if it's the missing link?
Click to expand...
Click to collapse
Look in the top left or right, it appears to be a sensor of some sort (proximity or ambient light sensor maybe?)
Its definitely a sensor.
Here check this out.http://www.powerbookmedic.com/manual.php?id=152
Youll have to find pics or video of a fully assembled board. Thats your best bet.
Search for electrical schematic?
Hope the video helps. Theres a bunch of em in that link.
sent from my T.A.R.T.I.S
(Time And Relative Tarts In Space)
OK, not a sensor! It's the camera button, I'm pretty sure. It just happened to me too! I can't get it back on though
---------- Post added at 09:15 PM ---------- Previous post was at 08:30 PM ----------
---------- Post added at 09:39 PM ---------- Previous post was at 09:15 PM ----------
Got it! I circled where it goes!
Hello everyone;
This is not a big issue, but bugging nevertheless... When I first got my phone, it would make a small vibration when I plug it into charger...
But few days ago, this behaviour stopped... And for the life of me, I can't see where can this be configured!
No firmware updates this week, only some gear updates... Not sure they can affect such thing :-/
Not sure if it was always like that.. But it just made the vibrate while screen was off -_-
Known issue. This indicates that the left side DDR RAM holder pin is no longer magnetic.
---------- Post added at 02:13 PM ---------- Previous post was at 01:34 PM ----------
Just fooling.
i found something interesting while reading information about stylus of g note series
i found this interesting so m just sharing this:angel:
u can use this trick in g note 1, note 2 or in note 3
just place small thin cello tape ovr the point of ur stylus i have attached pic of my stylus as well u can see
just remember to place thin uncolored tape tightly ovr point of ur stylus n u can see the magic:good:
Please tell me more about this I tried this but does not work :/
make a more detiled picture if u can or draw in paint
Sure Bro will paint it
Or if u lyk I will upload a proper video
the problem it's that is like the s-pen is pressed continuously. Can't do nothing with it
here is a short video link inside text document
KRAZZIEBOY said:
Sure Bro will paint it
Or if u lyk I will upload a proper video
Click to expand...
Click to collapse
u can see this video and do the same as i did it in this video:good:
This worked 100% for me wicked little trick thanks a lot
---------- Post added at 04:24 PM ---------- Previous post was at 04:23 PM ----------
I think you should win a reward for this sorry i can't donate
Ismail.A said:
This worked 100% for me wicked little trick thanks a lot
---------- Post added at 04:24 PM ---------- Previous post was at 04:23 PM ----------
I think you should win a reward for this sorry i can't donate
Click to expand...
Click to collapse
ur feedback is enough bro :good::angel:
https://i.imgur.com/kIZykLG.jpg
Just got received my PH-1 today and I noticed that the notification LED is blocked by something?
It's a bit exaggerated in the pic since it's so large, but I can't move it or blow it out with compressed air. It's definitely behind the grill too.
Is this something normal for all updated PH-1's with a metal grill?
I had a little crud in the top slot. I used an anchol wipe to gently wipe it out of the slot. Worked a treat.
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
johnny8910 said:
I had a little crud in the top slot. I used an anchol wipe to gently wipe it out of the slot. Worked a treat.
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
Click to expand...
Click to collapse
Yeah, I'm afraid I can't get to it with any method since it's behind the ear piece.
My OCD is kicking into high gear and I think I may RMA for this stupid issue...