For anyone that nuked their SM-G920 by installing the horrible COF8 OTA trojan, there is hope.
Symptoms:
Phone is stuck in Samsung S6 boot logo and does not go further or you get the download error screen saying in red that that the load has failed, this is the answer that worked for me.
If you do not know by now that the cursed COF8 will block you from flashing anything earlier than COF8 or COF9, it is a fact until there is a solution to bypass this Samsung Curse.
How I fixed mine:
You already tried TWRP 2.8.7.1 and it loaded so you can get into TWRP recovery = great. Reset and wipe does nothing = normal.
You flashed the bootloader and modem of COF8 and it worked = great, but you can not get to a wipe option, this is normal.
Current fix:
Download latest COF9 or crossover COF8 / COF9. Odin flash and you have a working phone again.
This G920IDVU2COF8_G920IUUB2COF9_TTT.zip for SM-G920T
worked on my SM-G920i , I did not find anything else that is close to a proper Odin tar ball for COF8 or later except this one.
Normal COF8 zip's is useless as how do you get a TWRP zip onto the phone if you do not have access to the phone filesystem unless you are a ADB genius.
Link = use google to search for it. Will it work for anything else, no idea, likely would for some SM-G920 other than SM-G920i
Hope this helps someone that curses Samsung daily.
i dont get your english, but i have a very similar problem, i have a G920i and i flashed 5.1.1 India COF8 via SmartSwitch and i dont like it so i download 5.1.1 Trinidad and Tobago COF9 installing it via ODIN and it sayed to me FAIL!. so i downloaded again 5.1.1 INDIA COF8 and installed it again so i tried to change csc code with a code in the dialer to recive TTT OTA but TTT was no avaliable so i installed BNG (Bangladesh, in Sammobile appear Unknown) and i dont like it so i tried to change CSC code again but this time was no avaliable in dialer (idk) and i reflashed 5.1.1 INDIA via odin but CSC doesnt change still BNG. I Want to install Trinidad and Tobago COF9 Firmware but i can't, Can you Help me?
The first flash fails then volume down + power and home key until it gets back into download mode.
Flash again, usually on the 2nd try it works, seems like first failed attempt unlocks something.
Also make sure your computer does not go to sleep, nothing is running except essential normal windows ... and odin.
DO NOT TOUCH OR MOVE THE USB CABLE, very important, either the cable or USB port on the phone is Apple Iphone 6 quality. Only thing is to move your mouse 1cm left and right every 30 seconds to keep windows focused as crazy as this sounds.
When and if this flash is successful then it will do OTA when available form what it looks like to me. I could not find anything to root the COF8 / COF9 yet.
This COF8/9 TTT is a ? backwards / forward patch something ? so it ends up showing COF8 / G920IDVU2COF8
My model FCC ID: A3LSMG920i
It is not there to upgrade or for fun, it is only there to bring your phone back from dead / Samsung S6 text at boot screen.
An OTA trojan????
So there's a virus you can get by doing an OTA on stock ROM, really??
Sent from my SM-G920I using XDA Premium HD app
I think he's talking about efs modded phones
what is it, COF9 and where to download?
hi, sorry for my question but...
what is it, COF9 and where to download?
-*-*-*-*-*--*-*--*-
MadRocker said:
For anyone that nuked their SM-G920 by installing the horrible COF8 OTA trojan, there is hope.
Symptoms:
Phone is stuck in Samsung S6 boot logo and does not go further or you get the download error screen saying in red that that the load has failed, this is the answer that worked for me.
If you do not know by now that the cursed COF8 will block you from flashing anything earlier than COF8 or COF9, it is a fact until there is a solution to bypass this Samsung Curse.
How I fixed mine:
You already tried TWRP 2.8.7.1 and it loaded so you can get into TWRP recovery = great. Reset and wipe does nothing = normal.
You flashed the bootloader and modem of COF8 and it worked = great, but you can not get to a wipe option, this is normal.
Current fix:
Download latest COF9 or crossover COF8 / COF9. Odin flash and you have a working phone again.
This G920IDVU2COF8_G920IUUB2COF9_TTT.zip for SM-G920T
worked on my SM-G920i , I did not find anything else that is close to a proper Odin tar ball for COF8 or later except this one.
Normal COF8 zip's is useless as how do you get a TWRP zip onto the phone if you do not have access to the phone filesystem unless you are a ADB genius.
Link = use google to search for it. Will it work for anything else, no idea, likely would for some SM-G920 other than SM-G920i
Hope this helps someone that curses Samsung daily.
Click to expand...
Click to collapse
Related
Yesterday after I fin work I had issues with my phone where when i went to call it would just go blank when you try and got message android.phone stopped working and gave me a headache! I wiped data and cache ... I was using Pre rooted software XXUFNB8 by @DjeMBeY and still after full wipe got same issue and would not let me make calls or receive weird!!!
I decided to download from samfirmware my official stock which is I9505XXUFNC4 UK on EE... I kept on getting failed in ODIN when flashing and thought I had soft bricked as couldnt get into recovery and would only go into download mode ... would not boot as the flash failed it said try recovery through kies or something
Eventually I have used a DIFF USB cable TO MY DELIGHT this worked and flashed the STOCK UK EE firmware I9505XXUFNC4 ... it now lets me make calls thank god
I can now just re root using CF autoroot right????
Should I be careful of anything else when flashing now?
I also get issues with GPS and it does not lock to anything anyon else get this issue I was getting this on both the new and old one?
First of all please forgive me for opening yet another S4 wifi problem after kitkat upgrade, but I have tried everything I could possibly find here, on youtube and other forums. The only thing left to try is flash the modem but I'd rather ask before I brick my phone
I'm not quite sure if this is the same issue every single time or if in my case it is due to my ignorance and errors. I was an iphone/unlock/jailbreak user until last year so please bear with me. Android is new and fun (but scary) territory to me.
Situation, what I did and possible mistakes on my side:
-I'm in Spain but I bought my factory unlocked phone on amazon and it was for the Polish market (GT-I9505 Black, 16 Gb)
-My device was rooted don't even remember how I did it last year so no useful info on that side a part of using odin for windows.
- Until yesterday I was on jellybean, not quite sure if 4.2.2 or 4.3
- Yesterday I upgraded to 4.4.2 via mobile odin and yes I checked the boxes about clearing/deleting cache or whatever it's called.
- Used a stock firmware downloaded from other site (that one starting with "S" and with a great amount of firmwares for samsung devices of several countries)
- I chose a firmware randomly (maybe this was my mistake) because I hade read that the firmware was not that important and people where usimg leaked german firmwares on on phones from elsewhere. But I did choose one that matched the country of my phone (XEO/XX Poland)
- Everything is working fine but without wifi I'm buying new Mb bundles almost every 2 hours and I'll be broke very soon
If you guys think the solution is flashing the modem which file should I use? I see lots of them with different models/codes and I'm completely lost and have read a lot about messing with bootloaders/modems etc bricking devices so I'm freaking scared and ask for your charitative help!
All the info I could gather about my device right now (now I know I should have gathered this info also before attempting to upgrade but it's too late now!
SAMSUNG GALAXY S4 GT-I9505 Black Edition
Manufacturing date: 2013-12-23
BASEBAND Version: I9505XXUEMK8
BOOTLOADER Version:I9505XXUEMK8
PDA Version: I9505XXUGNG8
CSC Version: I9505YXZGNH2
Kernel: 3.4.0-2309103
KOT49H-I9505UGNG8
Android 4.4.2
Product code: GT2I9505ZKAXEO
Original CSC: XEO
Firmsware's CSC: XEO
Active CSC code: XEO
CSC Country: Poland
Any help would be greatly appreciated, I feel so dumb and frustrated right now that any joke or insult would be accepted with humbleness lol
Forgot to add I used the *#0011# command and went to wifi menu. Tried the ping test and it states: passed
status: DISCONNECTED
SSID: Unknown SSID
( In case this info is of any use )
voxel.xyz said:
Forgot to add I used the *#0011# command and went to wifi menu. Tried the ping test and it states: passed
status: DISCONNECTED
SSID: Unknown SSID
( In case this info is of any use )
Click to expand...
Click to collapse
Relax it has solution . The problem becomes coz the baseband and the bootloader are olds (android 4.3).
SAMSUNG GALAXY S4 GT-I9505 Black Edition
BASEBAND Version: I9505XXUEMK8
BOOTLOADER Version:I9505XXUEMK8
PDA Version: I9505XXUGNG8
CSC Version: I9505YXZGNH2
* Quick solution for recover WIFI:
1. Reflash the STOCK I9505XXUGNG8 (XEO) firmware via ODIN.
2. Let the process finish and reboot normally.
3. Dial *#1234# and have to appear this:
AP: I9505XXUGNG8
CP: I9505XXUGNG8
CSC: I9505YXZGNH2
4. Reflash again if not. Good luck
Thank you so much for your helpful reply Joku1981 !!!!! You made my day!!!
Can I do that with Mobile Odin??? My PC broke (Graphics card burnt) and until a couple of months won't be able to buy a new one.
To make sure I understand you: You mean Flash again the same firmware I used to upgrade to 4.4.2 in the first place?
I used this Firmware: I9505XXUGNG8_I9505YXZGNH2_XEO
should I try Flashing that same Stock Firmware again? and if does not work keep reflashing until the baseband and the bootloader get updated?
Why did they not update ? is this common or an error on my side???
I hope it can be done with mobile Odin since I can keep my root status, If I have to do it in Desktop Odin do I have to Re-Root after flashing???
Thank you so much for you kind help!!!!!!
Joku1981 said:
Relax it has solution . The problem becomes coz the baseband and the bootloader are olds (android 4.3).
SAMSUNG GALAXY S4 GT-I9505 Black Edition
BASEBAND Version: I9505XXUEMK8
BOOTLOADER Version:I9505XXUEMK8
PDA Version: I9505XXUGNG8
CSC Version: I9505YXZGNH2
* Quick solution for recover WIFI:
1. Reflash the STOCK I9505XXUGNG8 (XEO) firmware via ODIN.
2. Let the process finish and reboot normally.
3. Dial *#1234# and have to appear this:
AP: I9505XXUGNG8
CP: I9505XXUGNG8
CSC: I9505YXZGNH2
4. Reflash again if not. Good luck
Click to expand...
Click to collapse
SOLVED!!!!!
After nobody answered if I could use again "mobile Odin" to flash once more and try to fix my wifi not working I opened mobile odin and it gave me a warning about my version and having a wrong bootloader as a possibility of soft bricking my phone so I decided to stay away of mobile Odin this time.
I used desktop Odin (at work since my pc broke) and exactly the same firmware file downloaded from sammobile (but re-downloaded it just in case) and had to flash twice, the first time it went through the whole process ok right until the end where it showed the FAIL message.
I didn't know if I should turn off the phone stuck in download mode and with the process bar at 100 % or retry flashing without turning it off. So I decided not to turn it off (afraid it would get soft bricked or something). I closed mobile Odin but left phone On with download mode screen active and opened mobile Odin again got the "added"message and the blue color showing it was properly connected to the phone and started flashing process again....
I started getting red error messages saying the progress bar display was wrong (and it wasn't updating/kept stuck in the previous 100%) but after it finished it was flashed and everything was ok. WIFI WORKED!!!!!!
Now the weird part.....in case this happens /helps someone else:
- My phone DID NOT get wiped. My launcher and my apps stayed intact (I thought flashing even the same firmware always wiped data, I'm I wrong???)
- All my root apps (root explorer, titanium backup, so on and so forth) where there and working fine. One root checker stated I was rooted and another one stated I wasn't but even my launcher (nova) was working just as if I never flashed the phone.
- Since I was unsure of my "root" state and I did not have "supersu" app in my apps drawer I tried installing it via playstore but It always gave an error message (the application could not be installed in the default location)
- I rooted again just in case and the root process finished without errors but still I had no "supersu" app and one root checker said I was rooted and the other I wasn't. Tried installing "supersu" from the playstore but same error and could not get installed.
- I searched here and in other forums for similar problems/solutions but nothing worked until I tried several things that fixed the problem. Not really sure which fixed it so I will write them down in the order I did them:
1. Opened folder mount which I already had installed and it gave me an error and asked me to try the fix which I did.
2. Opened linked2sd which I already had installed also previous to the firmware flash. It gave me an error and asked me which was the partition to use (as when I first installed it) in my case it was ext4. And it seemed to start working as it normally does. No further error when reopening it.
3. Rebooted the phone and tried entering recovery mode to wipe cache etc but It never entered recovery mode. I get the message about going into recovery mode (top left corner small red letters) But right after that it reboots and I get the samsung logo and my home screen.
4. Tried reinstalling supersu again and no success. (By the way before I did all this steps I tried rooting again but got to the same point. No supersu on my apps drawer)
5. Downloaded BusyBox install (opened it but did not use it in any way, maybe something in the installation fixed my problem)
6. Opened mobile Odin just for curiosity sake and it opened fine and asked for downloading of the extra stuff as when I installed it the first time. After that I closed it
7. Rebooted normally (no recovery mode since I'm stuck without it)
8. Tried installing "supersu" and NOW it worked!!!
9. Checked in both root checker apps and both confirm I'm rooted and supersu started asking for granting permissions to apps again as it normally does!
10. Everytime I attempted flash, root, and even after some reboots I took the battery off (since I read in several threads it helped/was mandatory)
Conclusion now my WIFI problem is fixed, my root problem (that appeared doing the reflash for fixing my wifi problem) is also fixed. The only thing I could not fix is not being able to get into recovery mode.
Does anyone know a solution for recovering the ability to get into recovery mode????
Thanks to Joku for lighting me into re flashing once and again until my wifi was fixed!
PLZ help me on this guys , im going mad on this
HOW TO SOLVE THE " DM-VERITY VERIFICATION FAILED NEED TO CHECK DRK FIRST " or when i install a stock rom this one first appears bUt not in reCovery " DEVICE DOESNT HAVE DRK , INSTALL DRK " ????????
it all happened after i deleted my imei then succesfully restored it with backup when downgrading from that god forsaken CM13 made by raymanFX (it was build 8 i think) , now OTAs and Security patches all face this issue in recovery when installing after being downloaded , now im in middle of nowwhere with no backup and ive tried everything but none works and im not a hacker nor an information thief just a member waiting for HELP... (SM-N910H)
:crying::crying::crying::crying::crying::crying:
! THERE IS NO OFFICIAL SAM CUSTOMER SERVICE IN MY CITY AND mobile merchants are not TRUSTWORTHY !
Someone told me that i need to find a cert file for my Phone and i found it , how is it related to DRK and what should i do with it??
Whatever happens to the phone, if the phone turns on, doesnt have any hardware issue it can be revived.
The universal method is flashing stock firmware through odin
Download your country's note 4 firmware from sammobile and flash it through odin
Works most of the time
For any more help pm m!
yeah. try flashing samsung stock firmware with odin. have you done it
Sent from my SM-N920G using Tapatalk
YEP Odin flash is most of the time a good fix.
ankahuja said:
Whatever happens to the phone, if the phone turns on, doesnt have any hardware issue it can be revived.
The universal method is flashing stock firmware through odin
Download your country's note 4 firmware from sammobile and flash it through odin
Works most of the time
For any more help pm m!
Click to expand...
Click to collapse
well . odin was the first thing to try i have gone even far far away from odin and non works . but a video on youtube got my attention , a guy with a s6 edge had this problem and fixed with some sort of software (i attached it) , a friend of mine says that its sth called BOX and i dont understand him !https://www.youtube.com/watch?v=HlMQQPpqELI
ArmanFGT said:
well . odin was the first thing to try i have gone even far far away from odin and non works . but a video on youtube got my attention , a guy with a s6 edge had this problem and fixed with some sort of software (i attached it) , a friend of mine says that its sth called BOX and i dont understand him !https://www.youtube.com/watch?v=HlMQQPpqELI
Click to expand...
Click to collapse
See here: http://forum.xda-developers.com/note-4/help/dm-verity-verification-failed-recovery-t2945531
Use google and search for
Note 4 DM-VERITY VERIFICATION FAILED
You get a 100 hits.
The same occurred for my LG G3 D855 which has erased its IMEI just for trying 'restore upgrade errors' in the LG mobile support tool. From that onwards I have firmly decided not to flash manually in any way except when official upgrades / uupdates are released via KIES or via OTA update.
Please do not flash by your own as it is always risky. It is not a PC where you can take out the affected hard disk and fix it in a working PC and backup the data.
To all manual flashing persons :
If your phone succeeds in manual flashing, donnot brain wash others to do the same. Not all persons always do R & D in android like you.
sudhakar35 said:
The same occurred for my LG G3 D855 which has erased its IMEI just for trying 'restore upgrade errors' in the LG mobile support tool. From that onwards I have firmly decided not to flash manually in any way except when official upgrades / uupdates are released via KIES or via OTA update.
Please do not flash by your own as it is always risky. It is not a PC where you can take out the affected hard disk and fix it in a working PC and backup the data.
To all manual flashing persons :
If your phone succeeds in manual flashing, donnot brain wash others to do the same. Not all persons always do R & D in android like you.
Click to expand...
Click to collapse
Thanks for the reply but the main problem is that any OTA that comes to note 4 i download them and the device says to restart to recovery to install the Update and i say yes but when it goes to recovery the recovery wont function well since it shows dm-verity error and supported API : 3 the update process fails to complete . My imei is as cool as always i havent had a problem with IMEI since i bought the phone
at least 10000 people have note 4 and none has had the problem ???? REALLY ?
seems like im pretty f***ed up
chappatti said:
See here: http://forum.xda-developers.com/note-4/help/dm-verity-verification-failed-recovery-t2945531
Use google and search for
Note 4 DM-VERITY VERIFICATION FAILED
You get a 100 hits.
Click to expand...
Click to collapse
dear chappati , according to that video i need a physical thing which is called a BOX and a software called GC PRO because that guy had my problem and fixed it with a clicking , but im reasearching for 5 months and nothing comes out . i need information PLZ
Hi, i used to had that problem too, when i first flash a custom rom to my N910G i back up my stock rom.. everthing including EFS.. after that then i wipe everything like normal procedure when u flash a rom. till then 1 day i wanna go back to stock rom i accidentally ticked EFS while i wanna restore that stock rom back up and then i thought it was nothing serious until i flash stock rom with odin and when i boot into stock recovery that dm-verity message was shown, did so much research but no luck. my n910G was on a Singapore firmware, that time it had a update i just try my luck by downloading the latest SG firmware and then that message was gone! m now already on MM no problems like that anymore
Deleted
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
NovaEDMâ„¢ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!
im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.
Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.
Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:
spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?
Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)
The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol
Well at least you got it working and not using as a door stop
that was really sad story man.....
spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha