Database Users

LG GPad 7.0 LTE (v410) Firmware Update (?)

Just plugged the Gpad in to charge and this popped up. Hoping it's 5.0.
It's just sitting on 0% for the longest time.
I will update the status when I have something to report.
#fingerscrossed
-----------------------------
Updated on post:
Nothing. False alarm. I don't know how or why my tablet ended up on the update recovery screen because it was already powered on when I plugged it in, but no update.

That mode is only to update via lgflashtools....

My cousin's v410 is dead and I plugged it in to a USB wall charger. Some conductive trash must have been in the plug, I guess, because it rebooted to firmware update mode on me, instantly and from any state. If you see this mode unplug your tablet, hold down power to restart, and try a different cord or blow/clean the trash out of the plug.

Update to Lollipop lg G pad 7.0 lte v410 AT&T if you got a root issue
I had rooted my lg G pad and could not update to lollipop update this is how I got it to work. I removed the SD card and Sim card then I unrooted the tablet and restarted it. I also performed a hard reset from the settings menu. Make sure you unselected the data backup and automatic restore before resetting, now reset tablet. When it restarts just log into the WiFi and nothing else. Now go to settings and go to update center to find the firmware update download it and install it.

jlvvela84 said:
I had rooted my lg G pad and could not update to lollipop update this is how I got it to work. I removed the SD card and Sim card then I unrooted the tablet and restarted it. I also performed a hard reset from the settings menu. Make sure you unselected the data backup and automatic restore before resetting, now reset tablet. When it restarts just log into the WiFi and nothing else. Now go to settings and go to update center to find the firmware update download it and install it.
Click to expand...
Click to collapse
I'm too waiting for the same update, did you get any new link for that, mine is on 4.4.2 v41010d

No the update I got it through the settings menu on the tablet go to about tablet and then to check for updates that's how I got it.

Does anyone have any KDZ files?
I had a corrupted Stock ROM on a G Tab 7 Tablet due to applications that were installed by the previous owner; no matter what I did, Addware apps would always install on there own; I mean, even after restoring factory settings via the settings, or via the hardware combinations keys to reset to factory settings, It would reset the device but it would still install all the annoying apps as if they were Factory installed; weird, I had never seen something like this in any device I've worked on.
Anyways, since Factory Reset wouldn't help I had to Flash the Tablet.
I found the V41007h_0.kdz file which I was able to flash using the the LG Flash tool.
But now there is a a watermark in red "userdebug 4.20.17(42001700)" in the Home Screen.
So I'm hoping at the very least I can find a KDZ file to go back to the firmware version that the Tablet had which was V41010d.
Does anyone have any links to point me in the right direction?
If you can't post it in public, please Private message the links.
Thanks in advance for your help.

RaudelJr said:
Does anyone have any KDZ files?
I had a corrupted Stock ROM on a G Tab 7 Tablet due to applications that were installed by the previous owner; no matter what I did, Addware apps would always install on there own; I mean, even after restoring factory settings via the settings, or via the hardware combinations keys to reset to factory settings, It would reset the device but it would still install all the annoying apps as if they were Factory installed; weird, I had never seen something like this in any device I've worked on.
Anyways, since Factory Reset wouldn't help I had to Flash the Tablet.
I found the V41007h_0.kdz file which I was able to flash using the the LG Flash tool.
But now there is a a watermark in red "userdebug 4.20.17(42001700)" in the Home Screen.
So I'm hoping at the very least I can find a KDZ file to go back to the firmware version that the Tablet had which was V41010d.
Does anyone have any links to point me in the right direction?
If you can't post it in public, please Private message the links.
Thanks in advance for your help.
Click to expand...
Click to collapse
You've flashed a KDZ that contained a test build. If you follow the steps in my thread here http://forum.xda-developers.com/g-pad-10/general/tutorial-lg-gpad-v410-5-1-to-4-4-t3232150 then you can recover the lost space of your internal SD card and run custom ROMs. Unfortunately I don't think there is currently a way to go back to stock 5.0.2 from this point. If there is, it has not been documented in this form (to my knowledge).
Please post in my thread if you need help with that process.

jlvvela84 said:
No the update I got it through the settings menu on the tablet go to about tablet and then to check for updates that's how I got it.
Click to expand...
Click to collapse
I could not get it through SIM card because i don't have an AT&T SIM neither i live in the US nor AT&T has any services nearby, so i definitely need a zip file that might be an OTA or something that can be installed via ADB or system recovery. please share somethings for me.

Update LG Gpad 7.0
talvigi said:
I'm too waiting for the same update, did you get any new link for that, mine is on 4.4.2 v41010d
Click to expand...
Click to collapse
I was trying to update my GPad 7.0 to 5.0.2 or 5.1.0 from 4.4.2 and no OTA updates no matter what I do.
I'm on Android 4.4.2 with software version v41010d. Hardware says LG-V410 in "about tablet" section.
What's the quickest easiest way. I'm concerned that this is an older tablet and isn't updateable or has some update problems so that is the reason for my question. Maybe I'll keep it on 4.4.2 but wanted to run latest Kodi which won't work with anything but 5.0 or greater.

cejack said:
I was trying to update my GPad 7.0 to 5.0.2 or 5.1.0 from 4.4.2 and no OTA updates no matter what I do.
I'm on Android 4.4.2 with software version v41010d. Hardware says LG-V410 in "about tablet" section.
What's the quickest easiest way. I'm concerned that this is an older tablet and isn't updateable or has some update problems so that is the reason for my question. Maybe I'll keep it on 4.4.2 but wanted to run latest Kodi which won't work with anything but 5.0 or greater.
Click to expand...
Click to collapse
I never saw the OTA captured or a 5.X stock rom posted here, sorry. AT&T is notorious for blocking the release of firmware packages for their branded devices, so you won't find a V410 kdz from LG support either. If you can't get the System Update to work from the Settings menu, you might be stuck as far as stock goes. There wasn't much interest in updating stock in the community here because stock 5.0 patched the vulnerability that let us sign our own boot images. That effectively blocked TWRP and custom roms since the bootloader can't be unlocked. You could try the old take your sim out, reboot and check for the update trick. Some people say that doesn't work, and others swear by it.
There are plenty of 5.X and higher custom rom options, if you want to update the system that way. Tesla, Tipsy, and Validus were all 5.1 roms and they're still on androidfilehost.com. LOS and Candy have been updated up to 7.1. I keep Tesla on my V410 and it works great. All the custom roms rely on being on the 4.4 stock bootloader and radios since the kitkat bootloader was the only one vulnerable to the Bump exploit, so you're in a good place to start from.

jason2678 said:
I never saw the OTA captured or a 5.X stock rom posted here, sorry. AT&T is notorious for blocking the release of firmware packages for their branded devices, so you won't find a V410 kdz from LG support either. If you can't get the System Update to work from the Settings menu, you might be stuck as far as stock goes. There wasn't much interest in updating stock in the community here because stock 5.0 patched the vulnerability that let us sign our own boot images. That effectively blocked TWRP and custom roms since the bootloader can't be unlocked. You could try the old take your sim out, reboot and check for the update trick. Some people say that doesn't work, and others swear by it.
There are plenty of 5.X and higher custom rom options, if you want to update the system that way. Tesla, Tipsy, and Validus were all 5.1 roms and they're still on androidfilehost.com. LOS and Candy have been updated up to 7.1. I keep Tesla on my V410 and it works great. All the custom roms rely on being on the 4.4 stock bootloader and radios since the kitkat bootloader was the only one vulnerable to the Bump exploit, so you're in a good place to start from.
Click to expand...
Click to collapse
I find it strange that there isn't a separate device category on XDA for GPad 7.0. I guess there must be a reason - but it's probably too geeked out for a common humanoid like me to understand.

cejack said:
I find it strange that there isn't a separate device category on XDA for GPad 7.0. I guess there must be a reason - but it's probably too geeked out for a common humanoid like me to understand.
Click to expand...
Click to collapse
You aren't the first person to wonder about that. We requested a different forum for the V400/410 early on and it never happened. I don't know why. It does get confusing. You'll find the V400, V410, V480, V700 and probably a few more devices discussed here. A large majority of the development is for the V400/410, though.

Fastboot loop problem. pls help me.
Hi Dear Friends ( sorry my bad eng.)
I will tell you what I do.
1. My Device V410 AT&T version v41010b
2. İ setup my computer lg drivers & lg flash tool & lg one root and V41007h_0.kdz
3. i used one click root and successful.
4. i did my tablet download mode ( volume + and plug usb cable )
5. Start lg flash tool / select v41007h_0.kdz / and click CSE Flash button ( CDMA & DİAG )
6. Start Korean and Engilsh
7. Process pc screen %7 and tablet screen %6. and froze. i go to sleep early morning after 6 hours later. ı look process remain the same.
8. ı closed tablet unplug usb cable.
9. open tablet but only fastboot screen. ı try restart button after fastboot screen / i try restart bootloader select but only black screen.
10. power of and try open only fastboot screen.
what do I have to do now ? Please Help me.

Trane46 said:
Hi Dear Friends ( sorry my bad eng.)
I will tell you what I do.
1. My Device V410 AT&T version v41010b
2. İ setup my computer lg drivers & lg flash tool & lg one root and V41007h_0.kdz
3. i used one click root and successful.
4. i did my tablet download mode ( volume + and plug usb cable )
5. Start lg flash tool / select v41007h_0.kdz / and click CSE Flash button ( CDMA & DİAG )
6. Start Korean and Engilsh
7. Process pc screen %7 and tablet screen %6. and froze. i go to sleep early morning after 6 hours later. ı look process remain the same.
8. ı closed tablet unplug usb cable.
9. open tablet but only fastboot screen. ı try restart button after fastboot screen / i try restart bootloader select but only black screen.
10. power of and try open only fastboot screen.
what do I have to do now ? Please Help me.
Click to expand...
Click to collapse
Download twrp for the V410 to a computer, then connect the tablet to the computer and try using this command with fastboot:
Code:
fastboot boot twrp.img
That should boot you into TWRP without actually flashing it. If it works, from there you should be able to try to wipe and flash some roms. Sorry, but I'm not convinced it will work in the state your tablet is in. If your device is falling back to fastboot, your laf partition is blank or damaged and very possibly some other partitions are missing or damaged too, and that might prevent TWRP or roms from working right.
If that fails, you can use fastboot to restore the laf partition and hope that brings back download mode so you can try the kdz again:
Code:
fastboot flash laf laf.img
I've restored my laf this way; I actually intentionally nuked laf to enable fastboot. I can provide laf.img if you decide to try this.

Samsung Galaxy Note 4 SM-N910W8 (Canadian) Hard-Bricked; Any Solutions?

I have a hard-bricked Samsung galaxy note 4.
After I rooted my note 4, it started to display problems. It would randomly crash processes, reset, and freeze. One day, it turned off by itself despite the battery being at around 40%. I tried to turn it on but it wouldn't respond.
I replaced the battery thinking it was a battery problem. It didn't fix the problem. I also replaced the power button inside my phone. That didn't fix it, either.
My phone cannot enter download mode. It also doesn't respond when i plug it into an outlet.
When i connect the phone to my computer, my phone is recognized as this device:
Qualcomm HS-USB QDLoader 9008 (COM5) [Ports(COM&LPT)]
Manufacturer: Unavailable
Model: QHSUSB__BULK
Model Number: Unavailable
Categories: Unknown
Description: Unavailable
Does anyone have a solution/fix for de-bricking a hard bricked note 4 SM-N910W8 with these problems? I've searched everywhere w/ no success. Thanks.
Edit - GREAT NEWS, fellow N910W8 users! A user posted the N910W8 debrick image, today! I haven't used it to debrick my phone, yet (My phone is disassembled and i may need a new battery) but there's no harm in trying it.
Link to the user's post (User name - Valentinez on page 20)
Link to the n910w8 debrick.img

Please explain what exactly did you do before starting to have those issues. What did you use for rooting?
Sent from my SM-N910F using XDA-Developers mobile app

Ok. I'll explain step-by-step. Since i'm a new user, i can't post outside links in my messages. I'll try to explain how i did it w/o links. I'll PM you the links i used to give you a clearer message on how i did it. Hopefully, i can PM links.
1. My phone was initially running 5.1.1 lollipop (n910w8vlu1coi4) before I decided to root it. It didn't display any of the problems that it had after rooting it.
Unfortunately, i used a guide that doesn't seem to exist, anymore.
I downloaded these files
- CF-Auto-Root-tritecan-tritecan-smn910w8.tar
- SuperSU - v2.65-20151226141550
- Odin3 - v3.10.6
- twrp-3.0.2-0-tritecan.img.tar
I did all of the pre-req things i was supposed to do before rooting (turned on developer mode & turned on USB Debugging). I put the CF-Auto-Root file in the AP field of Odin & pressed start. It passed. Afterwards, i put my phone in DL mode again and installed TWRP via the AP section of Odin. It passed as well.
My phone didn't root initially from doing both of those things. I had to go into TWRP and root the phone from there.
2. After doing all of that, my phone started to crash processes. Contacts crashed first from what I can remember. Others crashed over and over again. I thought it was due to having a bunch of apps on my phone prior to rooting it that didn't react well to the custom firmware/root. I decided to factory reset the phone via the OS' settings. When it turned back on, it continued to crash processes.
3. I decided to install CM 12.1 to see if that'd make a difference. I installed it via TWRP.
When i first booted CM12.1 up, i found that processes didn't crash on it, anymore. Also, it was faster than it was before. Unfortunately, it started to display other problems. It would freeze, reset, and turn off on its own. I reverted back to what i had before when that happened.
4. I decided that the CF-Root Tar image i installed to Odin to root my phone was screwing it up. I decided to un-root my phone by going back to stock firmware. I used samfirm (Samsung Firmware Downloader) to download the latest stock firmware for my phone.
Android 6.0.1 was the only stock firmware i could download. This was the name of the file:
SM-N910W8_1_20160507131653_k12ydzqths.zip
I flashed it to my device via odin by putting it in the AP section of the program. It passed.
5. When i booted up my phone after that, it seemed fine. It had a battery drain problem but that was a widely reported problem w/ android 6.0.1. My phone also wasn't rooted, anymore.
Unfortunately, the problems my phone had before came back. It would freeze and reset here and there. The processes didn't crash like they did after i initially rooted the device, though.
6. About a week later, my phone turned off by itself & wouldn't turn on anymore. I hooked up the phone to my computer and it wouldn't recognize it as a note 4. It recognized my phone as "QHSUSB_BULK".

feez_22 said:
Ok. I'll explain step-by-step. Since i'm a new user, i can't post outside links in my messages. I'll try to explain how i did it w/o links. I'll PM you the links i used to give you a clearer message on how i did it. Hopefully, i can PM links.
1. My phone was initially running 5.1.1 lollipop (n910w8vlu1coi4) before I decided to root it. It didn't display any of the problems that it had after rooting it.
Unfortunately, i used a guide that doesn't seem to exist, anymore.
I downloaded these files
- CF-Auto-Root-tritecan-tritecan-smn910w8.tar
- SuperSU - v2.65-20151226141550
- Odin3 - v3.10.6
- twrp-3.0.2-0-tritecan.img.tar
I did all of the pre-req things i was supposed to do before rooting (turned on developer mode & turned on USB Debugging). I put the CF-Auto-Root file in the AP field of Odin & pressed start. It passed. Afterwards, i put my phone in DL mode again and installed TWRP via the AP section of Odin. It passed as well.
My phone didn't root initially from doing both of those things. I had to go into TWRP and root the phone from there.
2. After doing all of that, my phone started to crash processes. Contacts crashed first from what I can remember. Others crashed over and over again. I thought it was due to having a bunch of apps on my phone prior to rooting it that didn't react well to the custom firmware/root. I decided to factory reset the phone via the OS' settings. When it turned back on, it continued to crash processes.
3. I decided to install CM 12.1 to see if that'd make a difference. I installed it via TWRP.
When i first booted CM12.1 up, i found that processes didn't crash on it, anymore. Also, it was faster than it was before. Unfortunately, it started to display other problems. It would freeze, reset, and turn off on its own. I reverted back to what i had before when that happened.
4. I decided that the CF-Root Tar image i installed to Odin to root my phone was screwing it up. I decided to un-root my phone by going back to stock firmware. I used samfirm (Samsung Firmware Downloader) to download the latest stock firmware for my phone.
Android 6.0.1 was the only stock firmware i could download. This was the name of the file:
SM-N910W8_1_20160507131653_k12ydzqths.zip
I flashed it to my device via odin by putting it in the AP section of the program. It passed.
5. When i booted up my phone after that, it seemed fine. It had a battery drain problem but that was a widely reported problem w/ android 6.0.1. My phone also wasn't rooted, anymore.
Unfortunately, the problems my phone had before came back. It would freeze and reset here and there. The processes didn't crash like they did after i initially rooted the device, though.
6. About a week later, my phone turned off by itself & wouldn't turn on anymore. I hooked up the phone to my computer and it wouldn't recognize it as a note 4. It recognized my phone as "QHSUSB_BULK".
Click to expand...
Click to collapse
Were able to fix?
I have a Rogers n10w8 that FUBAR'd too
---------- Post added at 10:33 AM ---------- Previous post was at 10:19 AM ----------
CANNOT BELIEVE THAT I CANNOT FIND ANY WHERE!
Can someone please upload a debrick.img for this phone and post a link?
Please...
Thanks!

Is there a fix yet?

my note 4 phone is restarting and freezing
my note 4 phone is restarting and freezing every 10mins and i'm on the verge of smashing the thing off a brick wall.
if anyone thinks they can help, please get back to me asap.

kojam said:
Were able to fix?
I have a Rogers n10w8 that FUBAR'd too
---------- Post added at 10:33 AM ---------- Previous post was at 10:19 AM ----------
CANNOT BELIEVE THAT I CANNOT FIND ANY WHERE!
Can someone please upload a debrick.img for this phone and post a link?
Please...
Thanks!
Click to expand...
Click to collapse
Not yet.

pukarmhz said:
my note 4 phone is restarting and freezing every 10mins and i'm on the verge of smashing the thing off a brick wall.
if anyone thinks they can help, please get back to me asap.
Click to expand...
Click to collapse
You should restore it w/ odin. Type in "Galaxy Note 4 restore odin xda" on google and you'll find a few good threads.

Droidskii said:
Is there a fix yet?
Click to expand...
Click to collapse
Nope. Not yet. I've been searching and searching for months and haven't found anything.

Same here. I've been searching everywhere for a 910W8 debrick image everywhere but no luck. If anyone has one, please post.

thepez said:
Same here. I've been searching everywhere for a 910W8 debrick image everywhere but no luck. If anyone has one, please post.
Click to expand...
Click to collapse
Check the original post of this thread. I updated it with the n910w8 debrick.img.

kojam said:
Were able to fix?
I have a Rogers n10w8 that FUBAR'd too
---------- Post added at 10:33 AM ---------- Previous post was at 10:19 AM ----------
CANNOT BELIEVE THAT I CANNOT FIND ANY WHERE!
Can someone please upload a debrick.img for this phone and post a link?
Please...
Thanks!
Click to expand...
Click to collapse
Check the thread's initial comment. I updated it with the N910w8 debrick.img and where it was found. They have steps on how to fix your phone.

my computer can't find my phone/cannot restore to stck

Hi and hello everyone..
lately i ran into a issue, i restored my phone with the newest firmware from sammobile and after that i root it and install with costum ROM.
there wierd start after this, my PC cant find my phone anymore, "USB device not recognized"
this is what i have tested so far..
1. checked " #*0808#* to see if the phone is on AP + MTP+ADB mode
2. reinstall drivers
3. installed and uninstall KIES or switch
4. reinstall my windows 10 and windows 7 on some other computer
5, tried diffrent cable, even bought a brand new samsung OEM cable from the store
6. ODIN download mode dont find my phone too
7. tried all cable with a USB HUB with external power
8. cant find/see OTG memory stick in setting or in recovery mode
i wonder if the last flash to stock firmware went wrong.. but anyway, now i want to reflash the firmware, but since there is noway to find the phone in ODIN mode, what are my option.
even tried Mobile ODIN(payed version), but s6 edge plus is not supported.

What's your model man? & What firmware version?

LilAnt530 said:
What's your model man? & What firmware version?
Click to expand...
Click to collapse
A s6 edge plus (sm-g928F) firmware 6.0.1 with Pure-Stock ExtraLite ROM
i also notice now, only thing that are working is charging in slow speed, from 5% too 100% will take about 4h 40min... fast charging is also disable in somehow. have check the setting in battery menu and also tested few oem cable.
only thing i can do now is flash with other costum rom that i download in phone.

Righttoknow said:
A s6 edge plus (sm-g928F) firmware 6.0.1 with Pure-Stock ExtraLite ROM
i also notice now, only thing that are working is charging in slow speed, from 5% too 100% will take about 4h 40min... fast charging is also disable in somehow. have check the setting in battery menu and also tested few oem cable.
only thing i can do now is flash with other costum rom that i download in phone.
Click to expand...
Click to collapse
Yes dude i have those charging issues too unfortunately they are recent, i turned fast charging off first thing because of reports it doesnt work correctly.
I have the same ROM available & the same model so l should be able to help if options are availabe lol
Can you get into TWRP? I have a backup for CM13 that you could restore then try booting into download mode
---------- Post added at 02:28 AM ---------- Previous post was at 02:08 AM ----------
https://drive.google.com/file/d/0B8POctqB-INiTVByZ2ZOQmJXeWM/view?usp=drivesdk
That may get you into a working CM boot so you can do something, also have another one you could try.

well, i guess i trying to find a way to reflash the phone with a new firmware, seems like 6.0.1 sucks. i guess the only option is with a flash box now...

Ohhhh!!!!!! Dude you need Odin v3.10 & the stock Lollipop tar.md5 then!

N910C factory upgrade forced bootloop, help

Hi there
I updated today from 5.1.1 to 6.0.1 through the settings, and it got stuck in boot loop.
I managed to get a custom ROM on but now I cannot make calls or sms messages. I can still use my wifi though.
I'm in Australia, model N910C .
I cannot seem to find any factory firmwares, my googlefu appears to be lacking this time.
Can someone please point me in the right direction of a fix?
My computer is being a stooge and won't connect me with ODIN, but I've come across FlashFire and might be able to use one of the computers at work.
Thanks

I managed to use a rubbish work computer to connect to Odin and flash stock 5.1.1, root and recovery. Back to square one
Sent from my SM-N910C using Tapatalk

try factory reset from recovery
---------- Post added 4th June 2017 at 12:10 AM ---------- Previous post was 3rd June 2017 at 11:59 PM ----------
this may work
http://firmware.smartphonewp.com/download-samsung-galaxy-note-4-sm-n910c-full-firmware-4-files/
flash 4 files with odin
u can find also mm version

Having trouble flashing my Samsung T567V Tab back to factory settings...

I want to put this Samsung SM-T567V Verizon tablet back to its original factory state, without the software the previous owner used for work, but I think I'm missing something. I've located the factory ROM and downloaded it. I boot the tablet up in odin mode. Start Odin in administrator mode on my laptop. Connect usb cable and recognize the tablet. Choose AP and locate the ROM file. Run the flash. Odin completes and says "PASS". Disconnect the tablet from my lappy and it reboots. Runs all of the normal setup screens as if new (language, email accounts, etc) and finally gets to a home screen. Then about 90 seconds later, it forces me to go through an install for some "Brookdale" program that I'm guessing the previous owner used for work. Once that is done, I see in the Apps section MobiControl and also Knox Mobile Enrollment Service (both mentioned during this last install), but nothing for Brookdale. Its really been driving me crazy! I've searched and searched but I cannot find any help or a solution anywhere. I don't want the previous owners company to think I'm trying to hack into them and I certainly don't want them accessing me either!
So I guess my questions are:
1. Are the MobiControl and Knox apps remnants of the previous user or are they actual factory programs?
2. If these are from the previous user, why wont they get wiped out when I flash the tablet? (I cannot uninstall them either)
Please help!!!
Thank you for any info you can share with me!
Mike

Hi ?
Hi,
I read your post and I have the exact tablet and have the same issues.. I was wondering if your ever got it resolved ?