hi,
i'm trying to go back to stock, but when i go to download mode, it says "upgrading firmware" and its stuck at 0%. the thing is, i didnt order it to upgrade anything, so what's it upgrading? drivers? should i operate flash tool while this is on 0%?
now, i can turn it off and reboot it to system, so i'm not stuck, but i can flash a KDZ without getting to a proper download mode.
any help would be greatly appreciated.
It's upgrading: NOTHING
IT wait's for you to upgrade
1. lg flash tool 2014
or
2. lg mobile suite
bender_007 said:
It's upgrading: NOTHING
IT wait's for you to upgrade
1. lg flash tool 2014
or
2. lg mobile suite
Click to expand...
Click to collapse
thank you so much!!!! you rock man!!!!
Hello,
I am also stucked in 0%. LG PC Suite doesn't see my phone. LG Flash tool 2014 also doesn't see my lg g2 :/
I tried to update my usb drivers in LG PC Suite and I am still in trouble.
Related
I tried to download via lg tools and flash something and failed.
when you restart the phone gave me the black screen.
I run ubuntu from the procedure
http://forum.xda-developers.com/showthread.php?t=2582142
after trying this procedure, the phone remains fixed on the lg logo.
How can I fix ??? I pray you are in a panic ...
the computer does not recognize the phone more
:crying::crying::crying::crying::crying:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
greyhd said:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
Click to expand...
Click to collapse
I have a d802
the phone is stuck on the lg logo.
As per the procedure would have to start the recovery but will not start.
Not part of the download mode.
I can get into factory reset but the pc does not recognize.
It seems to me a serious case. The guarantee how it behaves in these cases?
Dont you have recovery to flash new rom via ADB?
Try with ubuntu once again it will work out
ubuntu does not recognize the phone more.
The recovery is the original one.
Make sure the ports on the pc are set to 41. Do you have the drivers in the pc as well?
Sent from my VS980 4G using Tapatalk
Here's the story in brief:
I connected the phone to LG PC Suite, it offered an upgrade to D80220C. I started the update, and left the phone connected to PC Suite over night to allow PC Suite to download the file.
I wake up in the morning to find the phone stuck on the LG Logo with the LED blinking like it does on start up.
Since then, the phone will not boot past that logo.
I tried the few guides for Stock ROM Flashing, but LG Flash Tool always says the phone isn't connected while in download mode.
Can anybody recommend a way to make the phone work again anyhow?
alsiladka said:
Here's the story in brief:
I connected the phone to LG PC Suite, it offered an upgrade to D80220C. I started the update, and left the phone connected to PC Suite over night to allow PC Suite to download the file.
I wake up in the morning to find the phone stuck on the LG Logo with the LED blinking like it does on start up.
Since then, the phone will not boot past that logo.
I tried the few guides for Stock ROM Flashing, but LG Flash Tool always says the phone isn't connected while in download mode.
Can anybody recommend a way to make the phone work again anyhow?
Click to expand...
Click to collapse
did u make a factory reset ? and when u use lg flash tool u should be on download mode . r u ?
azher98 said:
did u make a factory reset ? and when u use lg flash tool u should be on download mode . r u ?
Click to expand...
Click to collapse
I cannot Factory Reset the phone, it gets stuck on the LG Logo itself. And I am unable to use the Flash Tool as well in Download Mode as Windows Keeps saying phone is not connected.
alsiladka said:
I cannot Factory Reset the phone, it gets stuck on the LG Logo itself. And I am unable to use the Flash Tool as well in Download Mode as Windows Keeps saying phone is not connected.
Click to expand...
Click to collapse
Device Manager > find the device and right click > Change COM port to 41
Hello guys.
I've been trying to do this on my LG Optimus L5 II E451g and it doesn't work. I can do the NORMAL FLASH but it didn't fix my problem so I want to do the CSE FLASH (to do a clean install). But I can't do that one.
Everything goes fine until the third step: "Wait until software extraction is complete..." then after a few seconds it crashes "LGUserCSTool LG Mobile has stopped working".
I'm using Windows 7 Ultimate SP1.
I tried different drivers, the old method with the host file automated (says the phone is not connected but it is), LG Update Tool 2014 and KDZ Update but nothing works. This error says the module with trouble is "msvcr100.dll". KDZ file is in the software folder, Windows recognizes the phone when I conect it to enter Download Mode, I installed every Visual C++ package I found, everything seems fine but it doesn't perform the CSE FLASH. It does the NORMAL FLASH so the KDZ is fine.
I'm sick of this. I don't want to buy a new phone. Anybody has any idea???
Regards.
lmc23 said:
Hello guys.
I've been trying to do this on my LG Optimus L5 II E451g and it doesn't work. I can do the NORMAL FLASH but it didn't fix my problem so I want to do the CSE FLASH (to do a clean install). But I can't do that one.
Everything goes fine until the third step: "Wait until software extraction is complete..." then after a few seconds it crashes "LGUserCSTool LG Mobile has stopped working".
I'm using Windows 7 Ultimate SP1.
I tried different drivers, the old method with the host file automated (says the phone is not connected but it is), LG Update Tool 2014 and KDZ Update but nothing works. This error says the module with trouble is "msvcr100.dll". KDZ file is in the software folder, Windows recognizes the phone when I conect it to enter Download Mode, I installed every Visual C++ package I found, everything seems fine but it doesn't perform the CSE FLASH. It does the NORMAL FLASH so the KDZ is fine.
I'm sick of this. I don't want to buy a new phone. Anybody has any idea???
Regards.
Click to expand...
Click to collapse
This is not for second Lg generation.
Ask on propper forum.
Paget96
Hi,
I recently bought an LG G2 D802 European version. OS Kitkat 4.4.2
Plugged it in to update via LG PC SUITE from 20b - 20D.
After upgrade the device starts and goes baboons... Touch is not working properly, cant get it to factory reset, Cant get into Download mode.
PC does not detect it anymore. Can anyone please help me out here.
Thank you in advance.
Can anyone tell me how to flash fresh KDZ via LG FLASH TOOL without getting into DOWNLOAD MODE?
hey there, while updating software with lg pc suite my g2 ended up in brick mode and only show the lg symbol.
i tried to install stock rom using this thread
http://forum.xda-developers.com/showthread.php?t=2432476
but, the computer does not recognize my phone, Probably becuase its on fastboot mode and not regular download mode,
i cant seem to find a way to fix it, any suggestions?
thanks!!!
or207 said:
hey there, while updating software with lg pc suite my g2 ended up in brick mode and only show the lg symbol.
i tried to install stock rom using this thread
http://forum.xda-developers.com/showthread.php?t=2432476
but, the computer does not recognize my phone, Probably becuase its on fastboot mode and not regular download mode,
i cant seem to find a way to fix it, any suggestions?
thanks!!!
Click to expand...
Click to collapse
Try this one, it worked for me, seems dangerous, but it seems like you have corrupted qhsusb
https://www.youtube.com/watch?v=E7zbs6of_4I
Whis will allow you to enter to download mode, then you can use the lg flash tool.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Try nuking download mode and then entering it. If it doesn't work, try the unbrick.
By the way, using capital letters doesn't hurt.