[Q] Can't get the phone to work normally again - Galaxy S 4 Q&A, Help & Troubleshooting

Hi,
I've owned all the Galaxies and never had any problems installing ROMs.
Ten days ago I bought an unlocked new GT-I9500 in USA. It's not a knockoff, I've checked the IMEI and I know the device (I've had one for a year back in 2013), there is no chance this phone is not legit (even though it's made in China).
I brought the phone to Argentina, where I live.
When I first turned it on I didn't notice anything out of the ordinary, so I assume it worked fine. The thing is I didn't get to test it thoroughly at that moment because I installed a 5.0.1 stock ROM right away (I think the phone came with 4.4.2).
This 5.0.1 ROM worked horribly, all apps were force closing all over the place (even unopened apps), without me doing anything, I would be just watching the screen and the FC dialogs would just pile up. The phone was unusable because you needed to dismiss several FC dialogs before you could get to the screen below, and by then you got a new FC coming up.
Many times when I rebooted, it would say it was optimizing 3 or 4 apps, and then it would work a bit better, or maybe a bit worse, it was a totally random thing. It also rebooted spontaneously, Play Store would close spontaneously, many apps refused to update giving error codes like "unknown error 960" or something like that.
Things I already tried:
-Reinstalled same ROM 5.0.1 I9500UBUHOE2_I9500UUBHOE2_I9500UBUHOE1_HOME.tar
-Installed different ROM 5.0.1 I9500UBUHOE3_I9500ZTOHOF1_I9500UBUHOE1_HOME.tar
-Did all wipes, before and after
-Reinstalled with PIT and re-partition
-Installed Philz and tried "clean to install a new ROM"
-Reinstalled 5.0.1 ROM
-Again tried "clean to install a new ROM"
-Reinstalled 4.4.2 I9500UBUGNJ1_I9500UUBGNJ1_I9500UBUGNJ1_HOME.tar, which is the version I think the phone originally had installed.
-Of course, in the meantime I lost the IMEI and had to restore it from backup.
After downgrading to 4.4.2 the situation got a little better, but I still get several FCs and spontaneous reboots. On one opportunity I booted into recovery, wiped cache, and when I rebooted it got stuck in the boot logo. I removed the battery, turned it on and it did the same thing. I had to boot into recovery and wipe data/factory reset to get it to boot.
I have two theories:
1) There are some residual files or settings from previous ROMs that I can't seem to get erased, and these are interfering with the new ROMs I install.
2) The phone is defective (memory issue, perhaps?)
Theory 2) seems odd because before installing 5.0.1 for the first time, the phone appeared to work correctly. Granted, I just tried it for a minute or so, but anyway.
Theory 1) seems odd because I did all the wipes, the "clean to install a new ROM" thing, and even re-partition. Can any problematic data survive after all that?
I guess the questions for you guys are:
1) Did this happen to anyone else? Could you solve the problem?
2) Is there a way to erase the phone more deeply?
Thank you.
Ricardo

The PIT file should repartition the phone, meaning it should also wipe it.
Are you sure it is a GT-I9500?
People tend to repair phones with compatible parts from other phones. In this case maybe they used parts from other S4 models (9505, 9506 etc).
Boot into download mode and check the phone model.

GDReaper said:
The PIT file should repartition the phone, meaning it should also wipe it.
Are you sure it is a GT-I9500?
People tend to repair phones with compatible parts from other phones. In this case maybe they used parts from other S4 models (9505, 9506 etc).
Boot into download mode and check the phone model.
Click to expand...
Click to collapse
The phone is brand new, and I've checked all known signs of it possibly being fake. I'm pretty sure it's not fake.
See attached image.

Sound like your storage is corrupted.
If you are out of options then you can try to select nand erase all in Odin. Maybe that could fix it. Make sure to add a .pit file, bootloader, modem, rom and check re-partition before doing that.

rabadanpaz said:
The phone is brand new, and I've checked all known signs of it possibly being fake. I'm pretty sure it's not fake.
See attached image.
Click to expand...
Click to collapse
I believe there's no "brand new" S4 in the market right now.

I haven't used philz but twrp .. and if you also install twrp recovery for i9500 ..then you get option for advance wipe .. check everything in advance wipe ( don't forget to take backups .. contacts ..files etc) then swipe to wipe everything .. then go back to main menu and reboot in download mode .. (you may get warning like no OS installed) then install a new ROM via Odin from PC .. you will get a fresh installed ROM
If you still face any FC .. go back to recovery mode .. choose advance then do fix permission .. hope that helps ..

Lennyz1988 said:
Sound like your storage is corrupted.
If you are out of options then you can try to select nand erase all in Odin. Maybe that could fix it. Make sure to add a .pit file, bootloader, modem, rom and check re-partition before doing that.
Click to expand...
Click to collapse
I've been reading about nand erase. It looks like I just need the ROM and the pit file. Maybe the ROM includes everything else you mention?

rabadanpaz said:
I've been reading about nand erase. It looks like I just need the ROM and the pit file. Maybe the ROM includes everything else you mention?
Click to expand...
Click to collapse
The Samsung official Roms have all integrated, SO, booloader, modem, etc. What lacks is the pit file, you have to get it from other place. I have an I9500 and had those issues when installing 5.0.1 official rom, i believe is not a very stable rom and also drains a LOT of battery. If you can install a custom recovery, try the "[GearCM][i9500][5.1.x] Optimized CyanogenMod 12.1 for Samsung Galaxy S4" rom, the post is in this forum , I'm currently using it and works awesome.

Ok guys, so I tried nand erase and the results are the same. Used both a 5.0.1 and a 4.4.2 ROM. Could this be a memory hardware error? Is there anything more radical that is left for me to try?

rabadanpaz said:
Ok guys, so I tried nand erase and the results are the same. Used both a 5.0.1 and a 4.4.2 ROM. Could this be a memory hardware error? Is there anything more radical that is left for me to try?
Click to expand...
Click to collapse
You can try this:
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/mod-multirom-v28-t2864469
Then you can boot a rom from your sd card. See if that works ok.

Will try that.
In the meantime, quick question: I've noticed that after nand erase the IMEI is retained. This would mean that nand erase does not erase everything really. Isn't it possible that some information is preserved (like the IMEI), and this is what is causing trouble?

Lennyz1988 said:
You can try this:
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/mod-multirom-v28-t2864469
Then you can boot a rom from your sd card. See if that works ok.
Click to expand...
Click to collapse
This looks like it only works for GT-I9505, mine is 9500. Any ideas?

rabadanpaz said:
This looks like it only works for GT-I9505, mine is 9500. Any ideas?
Click to expand...
Click to collapse
Oh yeah, sorry my bad.
Did you try a custom rom? Try something like CM.

Lennyz1988 said:
You can try this:
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/mod-multirom-v28-t2864469
Then you can boot a rom from your sd card. See if that works ok.
Click to expand...
Click to collapse
Found this one: http://forum.xda-developers.com/showthread.php?t=2417600
Do you think it's similar to the one you suggested?

rabadanpaz said:
Found this one: http://forum.xda-developers.com/showthread.php?t=2417600
Do you think it's similar to the one you suggested?
Click to expand...
Click to collapse
No, I checked it and it's less advanced. For example you can't boot from sd card.
Try a custom rom and see if that works for you.

Lennyz1988 said:
No, I checked it and it's less advanced. For example you can't boot from sd card.
Try a custom rom and see if that works for you.
Click to expand...
Click to collapse
Ok, tried CM12.1 and it has exactly the same problems.
I think it's time to change the memory chip or the motherboard, right?

rabadanpaz said:
Ok, tried CM12.1 and it has exactly the same problems.
I think it's time to change the memory chip or the motherboard, right?
Click to expand...
Click to collapse
Yes I think it is. If you want to do it yourself:
https://www.youtube.com/watch?v=qdQs9O539_c
The part you need (EMMC) is not that expensive.

Related

[Q] WiFi not working after update via Kies from 4.3. to 4.4.2

Hi there,
i have a rooted S4 i9505 with cwm installed.
yesterday i did an update from stock rom 4.3 to 4.4.2 (I9505XXUEMKE) via KIES.
the problem now....I cant turn on the wifi anymore. whenever i try to use the on/off switch for the wifi it instandly switches back to off.
is anyone else experiencing the same problem? has someone already a solution for that, before i will do a factory reset.
SDA1979 said:
Hi there,
i have a rooted S4 i9505 with cwm installed.
yesterday i did an update from stock rom 4.3 to 4.4.2 (I9505XXUEMKE) via KIES.
the problem now....I cant turn on the wifi anymore. whenever i try to use the on/off switch for the wifi it instandly switches back to off.
is anyone else experiencing the same problem? has someone already a solution for that, before i will do a factory reset.
Click to expand...
Click to collapse
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Jimsilver73 said:
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Click to expand...
Click to collapse
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
SDA1979 said:
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
Click to expand...
Click to collapse
Its correct
SDA1979 said:
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
Click to expand...
Click to collapse
you are on the new bootloader so you can flash the complete package - it has everything in it all in one package! - you won't brick your phone even if you flash the wrong modem, that is unless you did some thing real dumb like flash i9500 modem and even then I think its recoverable not that I suggest you try!!
depends where you are in the world - I used NB8 and it worked well for me in the UK - I'm on NB9 now and that seems nice also.
so to be clear flash this:
Combined package
For NewBootloader
GSM_Modem_XXUFNB8_and_LTE_Modem_XXUFNB8
https://mega.co.nz/#!3dR30JiT!cP5WrUCfz9L4h8doY7KTTV6fq4pFL85EkJBG6T-Gqhc
Jimsilver73 said:
you are on the new bootloader so you can flash the complete package - it has everything in it all in one package! - you won't brick your phone even if you flash the wrong modem, that is unless you did some thing real dumb like flash i9500 modem and even then I think its recoverable not that I suggest you try!!
depends where you are in the world - I used NB8 and it worked well for me in the UK - I'm on NB9 now and that seems nice also.
so to be clear flash this:
Combined package
For NewBootloader
GSM_Modem_XXUFNB8_and_LTE_Modem_XXUFNB8
https://mega.co.nz/#!3dR30JiT!cP5WrUCfz9L4h8doY7KTTV6fq4pFL85EkJBG6T-Gqhc
Click to expand...
Click to collapse
hey guys, thank you!!!
the Wi-Fi is working again.
Nonetheless i still have one problem remaining, which i thought it would have been fixed as well.
but, when GPS is turned on, it tries to find the GPS position and the icon on the status bar continues appearing and disappearing permanently (every half of a second).
Beside the fact that it is really annoying having this icon flashing all the time it also causes the display to freeze.
Especially when scrolling from top to the bottom to open the notification area.
It sometimes also lets the system crush completely.
any idea what this could be?
thanks for your effort so far.
SDA1979 said:
hey guys, thank you!!!
the Wi-Fi is working again.
Nonetheless i still have one problem remaining, which i thought it would have been fixed as well.
but, when GPS is turned on, it tries to find the GPS position and the icon on the status bar continues appearing and disappearing permanently (every half of a second).
Beside the fact that it is really annoying having this icon flashing all the time it also causes the display to freeze.
Especially when scrolling from top to the bottom to open the notification area.
It sometimes also lets the system crush completely.
any idea what this could be?
thanks for your effort so far.
Click to expand...
Click to collapse
hmmm......... thats not right!
Suggest you find a stock sammy ROM and flash anew in odin - then root using cf root, then flash recovery - (TWRP is very good :good then go into recovery and wipe cache, dalvik, system and data - reboot and see what happens on nice new shiny sammy stock - if all is good pick the ROM/kernel you want (if you want) and go back to odin to reflash modem.
The only other thing I can think is that you have an app that is messing with gps?? Do the above though and you should be golden :good:
EDIT: don't wipe system unless you planning flashing a different ROM through recovery!
Jimsilver73 said:
hmmm......... thats not right!
Suggest you find a stock sammy ROM and flash anew in odin - then root using cf root, then flash recovery - (TWRP is very good :good then go into recovery and wipe cache, dalvik, system and data - reboot and see what happens on nice new shiny sammy stock - if all is good pick the ROM/kernel you want (if you want) and go back to odin to reflash modem.
The only other thing I can think is that you have an app that is messing with gps?? Do the above though and you should be golden :good:
Click to expand...
Click to collapse
Hi, right way to flash the stock Samsung package, but after flashing a custom recovery, do not wipe system. There's no ROM after that so phone will not boot. And the newest modem is integrated in the stock package, so no need to flash it again.
And another advice: NEVER use Kies to update your phone. It has bricked 3 of mines.:cyclops:
speedwayfan75 said:
Hi, right way to flash the stock Samsung package, but after flashing a custom recovery, do not wipe system. There's no ROM after that so phone will not boot. And the newest modem is integrated in the stock package, so no need to flash it again.
And another advice: NEVER use Kies to update your phone. It has bricked 3 of mines.:cyclops:
Click to expand...
Click to collapse
Oops, well spotted! Yes, don't wipe system unless you have another ROM to flash through recovery. 3 phones bricked from kies huh? I never used it SVD don't think I ever will lol. Good old Sammy stock stuff, tbh that's why I steer well clear of anything stock Sammy unless absolutely necessary and last resort - I look at the farce they have made by forcing us to accept Knox pox!
Jimsilver73 said:
Oops, well spotted! Yes, don't wipe system unless you have another ROM to flash through recovery. 3 phones bricked from kies huh? I never used it SVD don't think I ever will lol. Good old Sammy stock stuff, tbh that's why I steer well clear of anything stock Sammy unless absolutely necessary and last resort - I look at the farce they have made by forcing us to accept Knox pox!
Click to expand...
Click to collapse
my thought was to go into recovery mode and wipe everything and start from beginning in order to exclude that it could depends on some wrong settings or any software already installed....
I updated to 4.4.2 using Mobile Odin and my wifi was borked too.
I did notice after the update that there was a mismatch between my Baseband version (still the old 4.3 XXUEMKE) and the Build number XXUFNB8, and I recall seeing some message during the flashing process that security had blocked the kernel update and Triangle Away might help solve it.
I therefore ran Triangle Away to reset my flash counter, and then used Mobile Odin to have a second go at flashing just the Kernel, Recovery and Modem parts.
This was successful and I now have matching Baseband and Build, both XXUFNB8.
And my wifi now works again...
ok.. after making a factory reset wifi and gps are working fine again.
guess there was some missconfigured third party app...
but now, with a fresh system i do not understand why i am not able to assign a PIN for my lockscreen...
everything is greyed out except PIN and Password.
but even though setting up a PIN, the screen lock is always set to use Swipe......
damn, i shouldnt have updated to 4.4.2.... until now.. only problems with this new build....
SDA1979 said:
ok.. after making a factory reset wifi and gps are working fine again.
guess there was some missconfigured third party app...
but now, with a fresh system i do not understand why i am not able to assign a PIN for my lockscreen...
everything is greyed out except PIN and Password.
but even though setting up a PIN, the screen lock is always set to use Swipe......
damn, i shouldnt have updated to 4.4.2.... until now.. only problems with this new build....
Click to expand...
Click to collapse
Try slimkat 3.2 from here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/909-jfltexx remember to download gapps and flash after you have flashed ROM. You won't be disappointed
Jimsilver73 said:
Try slimkat 3.2 from here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/909-jfltexx remember to download gapps and flash after you have flashed ROM. You won't be disappointed
Click to expand...
Click to collapse
hey thanks for your suggestion. but i want to keep using the stock rom. sufficent for my needs....
anyway.. finally i was able to get everything working after flashing the rom with odin again.
Jimsilver73 said:
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Click to expand...
Click to collapse
I feel compelled to express my gratitude for the post. Two days ago i updated from 4.3 to 4.4.2 on my rooted gt-i9505 via KIES and just like that no more wifi. This solution works like charm!!!
:good::good::good::good::good::good:

(Help) Note 4 bricked, unable to mount data

Hi guys, i have some big problems with my n910f, tried to upload a pic to facebook and my phone crashed.
It simply does nothing, not booting, not charging, download and stock recovery are working.
I tried everything possible>
*flashed 3 different stock firmwares with odin
*tried a pit file repartion in odin
*wiped cache, did a few factory resets from stock revovery
*bought a new battery
*tried to root and flash a custom recovery but doesnt work
It is simply as bricked as it could be, the only information about this i have is stock recovery telling me unable to mount /data
So it seems my filesystem got corrupted as hell
The question is, how do i repair it?
Like i said pit file and bootloader flash did nothing, odin lets me flash everything without an error but it doesnt help.
I assume i could somehow repair it with adb fastboot but how?
Any help is welcome!
atilla88 said:
Hi guys,
Any help is welcome!
Click to expand...
Click to collapse
It may or may not help but I would sure try Kies. You NSFW get done errors like Kies telling you is not compatible bit but I would try the firmware initialization.
CodeNameRedNeck said:
It may or may not help but I would sure try Kies. You NSFW get done errors like Kies telling you is not compatible bit but I would try the firmware initialization.
Click to expand...
Click to collapse
Well i forgot to mention that i tried kies aswell, everyhting went good but didnt help, still nothing.
It confuses me a bit that it doesnt even charge, could a broken filesystem lead to this?
atilla88 said:
Well i forgot to mention
Click to expand...
Click to collapse
I am not sure what parts of the system need to be working for the battery to be able to charge. Good luck.
CodeNameRedNeck said:
I am not sure what parts of the system need to be working for the battery to be able to charge. Good luck.
Click to expand...
Click to collapse
did try root=> costum recovery for your variant => installing costum roms for your variant (all can be done with odin +sd card and some fils on it) but warranty is lost it may worth the try
did you try the 5 flashing fils(pit pda bl csc phone) to initial stocks with odin
ZOHUHRZED said:
did try root=> costum recovery for your variant => installing costum roms for your variant (all can be done with odin +sd card and some fils on it) but warranty is lost it may worth the try
did you try the 5 flashing fils(pit pda bl csc phone) to initial stocks with odin
Click to expand...
Click to collapse
i have the same problem, do you know where can we find the complete 5 files (pit pda bl csc phone) for flashing with odin?
its the only thing i haven't already tried.
I manage to fix the issue with storage partition, i used a pit file and the one file firmware in csc button, that made the hole data partition rewriten again so the phone is able to boot properly.
Hope you gays this may help.
Happy new year!!
heratis said:
I manage to fix the issue with storage partition, i used a pit file and the one file firmware in csc button, that made the hole data partition rewriten again so the phone is able to boot properly.
Hope you gays this may help.
Happy new year!!
Click to expand...
Click to collapse
What makes you assume we're all gay?
Sorry pal, i better watch my grammar, i ment guys.

Stuck on logo after installing custom rom.

Hello.
I have a problem with my S4 i9500. I've successfully rooted it and flashed custom recovery. But I'd also like to install custom rom on it, and there is where problem begins. Every time I flash rom and reboot it stucks at boot logo. I've tried it with Philz and TWRP recoveries and three different kitkat AOSP based roms. But the situation looks the same every time, despite waiting over 15-30 minutes the system doesn't boot properly, it stucks at boot logo. Creating backups and restoring stock rooted rom works flawlessly however with both recoveries.
I've also tired twice to install rom without doing factory reset before and then it goes trough boot logo, however stucks at "android is being actualised" window or something like that.
I hoped to get rid of ugly and slow touchwiz from my phone as fast as possible, but with no succes so far. What am I doing wrong?
Sorry for possible mistakes, english is not my first language.
mintor said:
Hello.
I have a problem with my S4 i9500. I've successfully rooted it and flashed custom recovery. But I'd also like to install custom rom on it, and there is where problem begins. Every time I flash rom and reboot it stucks at boot logo. I've tried it with Philz and TWRP recoveries and three different kitkat AOSP based roms. But the situation looks the same every time, despite waiting over 15-30 minutes the system doesn't boot properly, it stucks at boot logo. Creating backups and restoring stock rooted rom works flawlessly however with both recoveries.
I've also tired twice to install rom without doing factory reset before and then it goes trough boot logo, however stucks at "android is being actualised" window or something like that.
I hoped to get rid of ugly and slow touchwiz from my phone as fast as possible, but with no succes so far. What am I doing wrong?
Sorry for possible mistakes, english is not my first language.
Click to expand...
Click to collapse
It should just work.
- Is your bootloader up to date?
- Running latest modem?
- Try not to flash it from your external sd but from your internal.
- Use something like Airdroid to transer the files from your laptop to your phone. I find it more reliable then cabled.
- Redownload the rom again.
- Use TWRP recovery. The rest is outdated.
- Make sure to properly wipe in the recovery. Maybe even wipe your internal storage (/data).
That's what comes to mind.
Lennyz1988 said:
It should just work.
- Is your bootloader up to date?
- Running latest modem?
- Try not to flash it from your external sd but from your internal.
- Use something like Airdroid to transer the files from your laptop to your phone. I find it more reliable then cabled.
- Redownload the rom again.
- Use TWRP recovery. The rest is outdated.
- Make sure to properly wipe in the recovery. Maybe even wipe your internal storage (/data).
That's what comes to mind.
Click to expand...
Click to collapse
How do I check bootloader version and update it if necesarry?
I tried flashing both from internal and external memory, with te same result (no success).
Also, I didn't transfer roms form PC, I downloaded them directly to my phone. I did it the same way with my older phones and never had an issue like this.
mintor said:
How do I check bootloader version and update it if necesarry?
I tried flashing both from internal and external memory, with te same result (no success).
Also, I didn't transfer roms form PC, I downloaded them directly to my phone. I did it the same way with my older phones and never had an issue like this.
Click to expand...
Click to collapse
As silly as it sounds, try to download them on your pc and then transfer them.
Lennyz1988 said:
As silly as it sounds, try to download them on your pc and then transfer them.
Click to expand...
Click to collapse
I was unable to get airdroid working correctly. I'm not sure if it wasn't because of SD restrictions on Kitkat. Maybe this causes my problem as well? I also realized that many file related operations like renaming a folder, deleting files and even downloading it is unsuccessful unless I use stock samsung app. I've transferred the rom later via USB cable and flashed, but the problem still occurs.
mintor said:
I was unable to get airdroid working correctly. I'm not sure if it wasn't because of SD restrictions on Kitkat. Maybe this causes my problem as well? I also realized that many file related operations like renaming a folder, deleting files and even downloading it is unsuccessful unless I use stock samsung app. I've transferred the rom later via USB cable and flashed, but the problem still occurs.
Click to expand...
Click to collapse
What roms are you trying to flash?
Lennyz1988 said:
What roms are you trying to flash?
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s4/i9500-develop/rom-t2913193
http://forum.xda-developers.com/showthread.php?t=2688387
and CM11 found outside XDA, I cannot find link.
I also tried to flash CM10.2 and 10.1, but both recoveries refused to even flash it.
I found out that the problem is I cannot flash kernel. I tried to flash few of them, but nothing changed in About device/Kernel Version. I also have SE for Android status "Enforcing".
mintor said:
I found out that the problem is I cannot flash kernel. I tried to flash few of them, but nothing changed in About device/Kernel Version. I also have SE for Android status "Enforcing".
Click to expand...
Click to collapse
What does it say your model is when you are in download mode?
Lennyz1988 said:
What does it say your model is when you are in download mode?
Click to expand...
Click to collapse
Do you mean "Product name"? It's SHV-E300K
It's Korean model. I'm not sure if GT-I9500 ROMs will work correctly on SHV-E300K (if it's booting), due to too many differences between International and Korean version.
Sent from my ASUS_Z00AD
mintor said:
Do you mean "Product name"? It's SHV-E300K
Click to expand...
Click to collapse
Then why did you say you have an i9500? You have a SHV-E300K which is a completely different model.
Lennyz1988 said:
Then why did you say you have an i9500? You have a SHV-E300K which is a completely different model.
Click to expand...
Click to collapse
Because in About device/Model number it shows I9500. Sorry, I didn't know the info from download mode is more important. Why would it show different things anyway?
mintor said:
Because in About device/Model number it shows I9500. Sorry, I didn't know the info from download mode is more important. Why would it show different things anyway?
Click to expand...
Click to collapse
Because you can change it manually, but you cannot change the model in in download mode.
forum.xda-developers.com/showthread.php?t=2284543&page=101
Use that thread for reference.

I've tried everything - someone please help

The Core Prime will not boot into recovery, or safe mode, or to the home screen. The only way to sometimes get it into download mode is leave it plugged into the wall charger for a couple minutes, then it will SOMETIMES go into download mode to charge. Holding down every combination of keys does not work, please don't suggest holding down keys.
All I ever see is a mmc confirmation fail movinand checksum confirmation fail error no matter what I try. I never see the Samsung intro, boot intro, or tracfone intro anymore, just a black screen that leads to that error message in red letters.
Regardless of which computer or cable I use, Windows never sees the phone. Doesn't try to install the drivers, doesn't make a sound that something was plugged in, nothing shows up in device manager, nothing (even in download mode)
I called 800 Samsung (4 times asking the same thing to different people to make sure I didn't just get helped by a noob over the phone). I went and talked to the Samsung guys inside worst buy (didn't do anything except informing me there is a Samsung store in LA). I called the Samsung store in LA and talked to a technician and the technician supervisor (I could drive there if their answer wasn't factory reset)
But EVERYONE from Samsung is saying all that can be done is factory reset.
I do not need a factory reset. I need my data.
I have posted numerous threads, and even though there was good advice given, none of it worked.
All I did before this error was try to update Google maps. The phone has never been backed up/rooted/nothing its stock.
At this point, I'm willing to negotiate paying someone to get my data back.
Someone please help.
Sorry To Hear that this is really a big problem but every thing has a solution ..
As you say the windows doesn't read the device and so as Odin try http://tinyurl.com/Heimdall-oa on Linux (don't use virtual machine )
OK if Heimdall read the device flash stock firmware (same version) if the device open congratulations
else flash custom recovery (you can find one in cyanogen discussion) and launch aroma file manager pull out your data so you're safe to reset ?? hope to be helped you .
The x man said:
Sorry To Hear that this is really a big problem but every thing has a solution ..
As you say the windows doesn't read the device and so as Odin try http://tinyurl.com/Heimdall-oa on Linux (don't use virtual machine )
OK if Heimdall read the device flash stock firmware (same version) if the device open congratulations
else flash custom recovery (you can find one in cyanogen discussion) and launch aroma file manager pull out your data so you're safe to reset ���� hope to be helped you .
Click to expand...
Click to collapse
Thank you for trying to help me. I do not yet have a Linux box set up. Can you recommend a distro, version, or live cd of Linux to use?
You can use Ubuntu 14.04
The x man said:
You can use Ubuntu 14.04
Click to expand...
Click to collapse
I will post my results here as soon as I try
If your phone is still stuck, flash TWRP (google it if you don't know it) for s820l. After TWRP is installed backup your data to your Internal or External Storage. Once the backup is complete factory reset (I highly suggest bakcking up to an SD card) if it still only boots to this screen try flashing the Stock ROM.
If your phone is messed up after the factory reset, i suggest SD card for files and everything if your computer has an SD adapter and reader you won't need to turn the device on. Hopefully this fixes it for you.
P.S. By no means do I know exactly what I'm doing, I flashed the wrong TWRP for mine and only got a download screen. This is the method i used to fix it. Also i am not allowed to post links or I would. so google sm-s820l custom recovery and to get a Stock ROM. Above the page for it should be a bunch of tabs that look like this " Android Area 51 > Forum > Straight Talk/Net10 > Samsung Phones > Samsung Galaxy Core Prime > Recovery Releases" Click on Samsung GCP and then your all set. Hope this helps.
AJOKER21 said:
If your phone is still stuck, flash TWRP (google it if you don't know it) for s820l. After TWRP is installed backup your data to your Internal or External Storage. Once the backup is complete factory reset (I highly suggest bakcking up to an SD card) if it still only boots to this screen try flashing the Stock ROM.
If your phone is messed up after the factory reset, i suggest SD card for files and everything if your computer has an SD adapter and reader you won't need to turn the device on. Hopefully this fixes it for you.
P.S. By no means do I know exactly what I'm doing, I flashed the wrong TWRP for mine and only got a download screen. This is the method i used to fix it. Also i am not allowed to post links or I would. so google sm-s820l custom recovery and to get a Stock ROM. Above the page for it should be a bunch of tabs that look like this " Android Area 51 > Forum > Straight Talk/Net10 > Samsung Phones > Samsung Galaxy Core Prime > Recovery Releases" Click on Samsung GCP and then your all set. Hope this helps.
Click to expand...
Click to collapse
Core prime model is also G-360* (main number) not just SM-820L .
The x man said:
Core prime model is also G-360* (main number) not just SM-820L .
Click to expand...
Click to collapse
True so if it's not the SM-S820L just input your model number instead of the one I posted that was my bad I assumed TracFone. Also don't think just because the phone is the same they will all work if you do use the wrong TWRP or ROM because the model is different it will brick your device. Again it was my mistake but overall I hope this helps.
AJOKER21 said:
True so if it's not the SM-S820L just input your model number instead of the one I posted that was my bad I assumed TracFone. Also don't think just because the phone is the same they will all work if you do use the wrong TWRP or ROM because the model is different it will brick your device. Again it was my mistake but overall I hope this helps.
Click to expand...
Click to collapse
Never mind i just wanted to share info. + mine reply was before twrp or cwm being ported to core prime ,and at this time no custom roms for 360* Models
Is TWRP ported to other versions of this phone? It seems like it is atleast the VE one has it and my TracFone version does I'm sure most of the others ones do and you also do not need a Custom ROM just a stock one which is probably floating around out there somewhere. For the OPs phone which if the model was posted this would be a billion times easier. So Mr. OP please post your model for us to help if your issue is still happening.
G360 Rom
AJOKER21 said:
True so if it's not the SM-S820L just input your model number instead of the one I posted that was my bad I assumed TracFone. Also don't think just because the phone is the same they will all work if you do use the wrong TWRP or ROM because the model is different it will brick your device. Again it was my mistake but overall I hope this helps.
Click to expand...
Click to collapse
I have a SM-S820L that i flashed with a 360 and now its bricked
Hii @android_n this is also happen with me on My core 2 G355H I also try to flash Offical frimware but it only boot for few second and shut down
I replace battery with new one and it booted
Problem is in battery it only boot when charger is connect or you can charge your phone battery by booster charger hit thanks if I help
I tried that what i need is a new OS. It keeps telling me No OS is installed but Havent been able to get it installed
noxqes said:
I tried that what i need is a new OS. It keeps telling me No OS is installed but Havent been able to get it installed
Click to expand...
Click to collapse
Check out this thread here http://forum.xda-developers.com/gal...stock-rom-deodex-busybox-root-t3378999/page1. Hope this helps
Sent from my SM-G360T1 using XDA Labs

[All ROMS] Problem with sound, dialer, video and sound payback, battery, heating.

Hello, I'll give you all info about the situation.
Its i9505.
There is no sound at all, dialer is VERY VERY laggy and when I manage to dial a number, it just stucks (see photo), it wont play any videos or any music tracks from any web sites or internal memory, the phone itself gets very hot invery fast time, and battery drains enourmously. Problems appeared all in same time, when the phone was still in the stock 4.3 MKF firmware. At first, I thought it was a software problem. Then I just basically tried factory reset, of course it didnt helped, then I flashed few custom roms, and every time still was the same problems. Maybe some you may call me dumb or something, but I've spent about 15hours searching, downloading, reading and flashing lots of ****, and still didnt get these problems solved. In this point I have CM 13 and CWM. I tried flash back the original rom, but ODIN gives me error <ID:0/003> FAIL! (Auth) , and now, with my head aching so much, I ask you for help. Hope to get some answers soon, thanks a bunch in advance.
If you're going to flash custom ROMs, use TWRP.
I flashed all custom roms with twrp, now I have cwm because i saw in One thread that cwm factory reset solves these problems, but it didnt and Then I gave up and started this thread. Its about 1minute to flash twrp back.
XMP LTU said:
I flashed all custom roms with twrp, now I have cwm because i saw in One thread that cwm factory reset solves these problems, but it didnt and Then I gave up and started this thread. Its about 1minute to flash twrp back.
Click to expand...
Click to collapse
I see.
To go back to stock it's recommended to use original cable and back USB ports. If it still doesn't work, try a different Odin and/or Windows version.
But, generally, if you have the same problem across different ROMs, it's usually some kind of hardware problem.
I've read in few threads and forums, that modem issue can cause these problems. Is that true?
XMP LTU said:
I've read in few threads and forums, that modem issue can cause these problems. Is that true?
Click to expand...
Click to collapse
It may be possible. Flashing a newer stock ROM should also update the modem and bootloader.
GDReaper said:
It may be possible. Flashing a newer stock ROM should also update the modem and bootloader.
Click to expand...
Click to collapse
I tried. I get the error which I wrote in my first post.
XMP LTU said:
I tried. I get the error which I wrote in my first post.
Click to expand...
Click to collapse
And I told you in my second reply to this thread the recommended steps. Did you do them?

Categories

Resources