Related
I plan on primarily using it for XBMC. The support looks good, along with the price and specs. What do you guys think?
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
As someone who had never used XBMC or Plex (or anything else like that for that matter) prior to this past month, I am so excited about how well XBMC works with the OUYA!
You sound like someone who has used it before. If you're familiar with the basics then getting the OUYA to run XBMC in (almost) flawless 1080p is...well...easy! With the release of an official version of XBMCHUB last week, I don't think I'll ever hook my laptop up to my TV again.
Going into the OUYA, I had no idea of it's potential as a do-all media center. I was hoping it'd have Netflix and flash content, but that's about as far as I had hoped, so I'm very excited about all of this.
At only $99, I've been hearing people say there is no better box for XBMC, but maybe other, more experienced people could chime in.
EDIT/ADDITION:
bornagainpenguin said:
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
Click to expand...
Click to collapse
I'm not sure what USB port problem you mean? I am using a 1TB WD USB HDD and have no problems with read.
I personally bought the ouya strictly for XBMC. I've used xbmc streaming from smb shares since original Xbox and it was called Xbox media center. I still use original Xbox with xbmc and the ouya is its replacement. Xbmc works amazingly better on it even in its alpha state. Those guys are pros and I have every faith they will deliver on the android platform. The only caveats so far is that I'd like a remote control instead of controller and it doesn't exist yet. Perhaps in the future it will. I've set my ouya to boot directly into xbmc but like above poster said the USB support needs work and the issue with the ouya turning itself on when its asleep and not shut down. That's annoying. Also don't plan to use WiFi. Ouyas metal casing hinders WiFi too much for streaming video in decent quality.
JLCollier2005 said:
EDIT/ADDITION:
I'm not sure what USB port problem you mean? I am using a 1TB WD USB HDD and have no problems with read.
Click to expand...
Click to collapse
I have a 2TB WD drive and a 3TB Toshiba drive, both using external power. With either of them if I plug in the drive light comes on and blinks but the OUYA doesn't mount it no matter how long I wait. One is formatted as FAT32, the other as NTFS. It makes no difference.
The workaround I've found (don't remember where I saw this originally) is to plug in the drive while the OUYA is powered off and unplugged, then do a system reset. After this, the external drive is recognized and mounted as /usbdrive and the light on the drive only flashes when being read from or written to. I can install XBMC, scan my movies and shows into the library, use the external drive for my emulator roms, etc, etc. It works.
The problem is if I remove the drive for any reason or if I get an update the drive is no longer recognized and I need to do another system reset again, add back all my games, reinstall XBMC and rescan my library (import doesn't seem to work for me) and hope that I don't have to deal with another system update any time soon....
That's why I'm not currently recommending the OUYA if people plan to use an external hard drive to access their media. I'm not the only one with these issues, if you Google for OUYA and external drive you'll see many others are having the same issues.
Sent from my Nook HD+ using Tapatalk HD
Ouya is stuck on 60hz framerate. So 24hz or 50hz files will have some stutter. Maybe stutter is not the right description, it's not perfectly smooth due to framerate adapting to 60hz. I have XBMC with hardware acceleration installed, it really is framerate conversion (or whatever you call it) that causes this.
I like XBMC on Ouya but prefer a media player that adapts its framerate output to the media file, like my Boxee Box does. You'll have a perfectly smooth picture. It really is a lot better to look at.
Using the XAF edition while I wait for Gotham to become stable for android. Works amazingly well.
Sent from my SGH-I317M using Tapatalk 2
Does Dolby digital and dts work with this?
Sent from my Nexus 4 using Tapatalk 2
wouwout said:
Ouya is stuck on 60hz framerate. So 24hz or 50hz files will have some stutter. Maybe stutter is not the right description, it's not perfectly smooth due to framerate adapting to 60hz. I have XBMC with hardware acceleration installed, it really is framerate conversion (or whatever you call it) that causes this.
I like XBMC on Ouya but prefer a media player that adapts its framerate output to the media file, like my Boxee Box does. You'll have a perfectly smooth picture. It really is a lot better to look at.
Click to expand...
Click to collapse
Yeah, I read about that. Is that a limitation that can be fixed with development, or is it impossible?
bornagainpenguin said:
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
Click to expand...
Click to collapse
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Also the XBMC Android build found here (http://forum.xbmc.org/showthread.php?tid=152005) works great on my Ouya. Navigating using the gamepad may be a little clunky but the capabilities of using the Ouya for full media playback is already there. Hell, I'm working on turning an Ouya into a full-fledged internet/digital PVR box.
just got my Ouya yesterday and I had xbmc with the 0.6 release installed and the xbmchub fusion wizard thing installed. The issues I have encountered are typing on that xbmc keyboard with only the touchpad is a very arduous experience. Navi-x is installed alongside all the 1 channel stuff but this has a script error but does not stop it from working.
It does crash in navi-x but the speed at which this thing boots up and restarts is rapid so it does not cause that much of a headache, but dont forget that this info comes from less than 24 hours usage.
Overal i am happy with this device and the xbmc install but i would like a easier way of starting the software similar to netflix on the apple tv as the kids can play what they like and not get on my back.
Skater4599 said:
...The only caveats so far is that I'd like a remote control instead of controller and it doesn't exist yet...
Click to expand...
Click to collapse
There are two remotes for XBMC the official remote doesn't seem to work for me. But Yatse works well but drains my phones battery really fast. And as a response to a USB drive not working, I have a 2TB WD Passport for my Ouya that works like a charm.
binome- said:
There are two remotes for XBMC the official remote doesn't seem to work for me. But Yatse works well but drains my phones battery really fast. And as a response to a USB drive not working, I have a 2TB WD Passport for my Ouya that works like a charm.
Click to expand...
Click to collapse
I'm talking an IR remote that can turn the console on/off as well... I have the android app remote working just fine. the official one even.
NssOne said:
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Click to expand...
Click to collapse
Perhaps, but so far the OUYA has been the only Android device I've not felt a need to root and I'd like to keep it that way. Maybe it's just an artificial distinction, but to my mind if I have to root to get basic functionality then the OUYA ceases to be a console (plug and play) and becomes a small computer. If I'm to treat the OUYA as a small computer then I may as well simply run Cyanogen Mod and not waste any money with the OUYA games, because I'll be too busy mapping the game pad to play the many titles available in the Play Store. It becomes a silly, pointless waste of time and money, because I have several desktops which I can use on my television and had in the past been running XBMC just fine on those desktops with my 5.1 surround sound card and speakers.
I bought the OUYA because it promised me XBMC + Games + Android in a simple to use console. Most of those interested in the OUYA as and XBMC box are also people who've already run XBMC on their televisions via an old desktop or htpc, and want a console which will make doing this easier and standardized to just work. We already hacked together something on the desktop; we're looking for the easy button.
Otherwise, we'd have just bought a Midnight box or a Pivos....
I'd say yes.
I've got XBMC running on a load of devices, Raspberry Pi, Pivos Xios DS, Odroid U2, Nexus 7, HTC One X, Intel i5 w/ATI 7770... The RPi and Pivos are sluggish, the Odroid very buggy, the Nexus, One X and Ouya (all tegra 3) are very usable and provide nearly as smooth an experience as the powerful PC.
There are a few bugs still being ironed out but none are show stoppers. The current libstagefright build works nicely enough and will only get better. We should have an interim 12.2 build hit the Ouya store soon which will be mostly bug free and feature complete.
For remote the controller is ok and will be better when they finish key mapping it. You can also connect the ps3 bluetooth media remote which makes for a better experience. Other options are IR remotes that present as keyboards or the FLIRC device.
The main thing to bare in mind is that the Ouya is a pretty new device with lots of development being done every day, something like 10 OS updates in the past 4 months - give the devs time and we'll have a very nice little Tegra 3 box; I'm looking forward to seeing where we'll be in 6 months time. Not to mention the work being done on XBMCs side. A lot of core devs are working on supporting the Ouya as they all have the device.
Sent from my Nexus 7 using Tapatalk 2
NssOne said:
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Also the XBMC Android build found here (http://forum.xbmc.org/showthread.php?tid=152005) works great on my Ouya. Navigating using the gamepad may be a little clunky but the capabilities of using the Ouya for full media playback is already there. Hell, I'm working on turning an Ouya into a full-fledged internet/digital PVR box.
Click to expand...
Click to collapse
I am also trying to replace cable TV with my Ouya and use it as a DVR. I would love some help, tips on getting it done.
* I have XBMC installed, but it doesnt see my network drives (shared drives on a Win7 PC), although all my other PCs can see them and use them?
* I planned on downloading the TV shows from 'sources' on the web, but wasn't sure how to setup auto gather new shows?
* I heard about Sick Beard and Coach Potato, but I never used them, I would love a guide or steps to help me set it up
* I wanted to get Amazon Video working too, since I pay for Prime, no official app, and I couldn't get a good Android one yet?
* Wouldn't mind having Hulu and Netflix too, I heard the google tv apks are best - any comments on that?
Anything you could help me with, would be very appreciated. I hate overpaying for Cable, and the service/quality sux
bornagainpenguin said:
I bought the OUYA because it promised me XBMC + Games + Android in a simple to use console. Most of those interested in the OUYA as and XBMC box are also people who've already run XBMC on their televisions via an old desktop or htpc, and want a console which will make doing this easier and standardized to just work. We already hacked together something on the desktop; we're looking for the easy button.
Otherwise, we'd have just bought a Midnight box or a Pivos....
Click to expand...
Click to collapse
You can't blame the lack of XBMC support on Ouya, it was up to the XBMC team to follow through on that. Ouya only announced it was going to come to the Ouya because that's what XBMC said on their own website. They're finally working on an Ouya fork for the next XBMC release, probably integrating libstagefright into it (because those work best on the Ouya).
And you could've gone for one of those other boxes. They're around the same price as an Ouya. I was a KS backer but I supported it hoping, yet not expecting, some ROM dev support for the console. I know there's CM10 but I'm going to wait for better unlocking of the system before I go full custom ROM. Unless the custom ROMs have better overscan compensation support already (a huge issue with Ouya on my TV).
Zehrfox said:
I am also trying to replace cable TV with my Ouya and use it as a DVR. I would love some help, tips on getting it done.
* I have XBMC installed, but it doesnt see my network drives (shared drives on a Win7 PC), although all my other PCs can see them and use them?
* I planned on downloading the TV shows from 'sources' on the web, but wasn't sure how to setup auto gather new shows?
* I heard about Sick Beard and Coach Potato, but I never used them, I would love a guide or steps to help me set it up
* I wanted to get Amazon Video working too, since I pay for Prime, no official app, and I couldn't get a good Android one yet?
* Wouldn't mind having Hulu and Netflix too, I heard the google tv apks are best - any comments on that?
Anything you could help me with, would be very appreciated. I hate overpaying for Cable, and the service/quality sux
Click to expand...
Click to collapse
1) I don't use network shares on my XBMC Ouya setup right now. All video files are stored locally to the external hard drive I have connected to my Ouya.
2 & 3) I actually couldn't get the Sick Beard Android app to load on the Ouya. I ended up buying an app called PowerNZB which came with its own Sick Beard server. It's just not as automated right now as it would be on PC when used in conjunction with SabNZBd and I hope to see that change soon. I don't know if I can talk about what 'web sources' I use openly either, but you can figure it out. Also I'll just bluntly tell you to Google Sick Beard tutorials to get a better idea of how to use it.
4 & 5) No clue. I don't have any of these on my Ouya at all. Sorry if I'm not as much help as you'd like.
NssOne said:
You can't blame the lack of XBMC support on Ouya
Click to expand...
Click to collapse
I don't.
As far as I'm concerned, XBMC has already produced a build for the OUYA which works quite well and which I expect to continue to get better and better. Instead I blame OUYA for being unable to (or unwilling?) to fix USB drive detection.
Sent from my Nook HD+ using Tapatalk HD
I appreciate the help
* at NssOne - Thanks, I do appreciate the help I wanted to use the network shares, that way I could have my win7 pc obtain all the shows and movies for me, using PC software, then place it on a shared network drive, where the Ouya could access them and play them. I figured that would be easier that having the Ouya run all that software and handle all those processes.
Which version of XBMC works best on Ouya, I saw several people post different versions, I know you need HW accel, but an exact file name or link would be appreciated.
Is Sick Beard better than Coach Potato? - I have never used either one? will they look for new shows and grab them for me?
Any one else trying to replace Cable TV with Ouya and XBMC? - Any advise, tips, software suggestions?
For XBMC Google the libstagefright version. And I don't know the difference between Sick Beard and Couch Potato. I've stuck with Sick Beard the whole time.
Sideloaded Limelight with the FireTV utility
Connected my Ouya bluetooth controller
Used Settings.apk and connected my HP bluetooth keyboard and mouse to the fire TV stick
Now playing all my steam games on the stick, streaming at 30 fps, just letting people know it works.
Need a better controller because the ouya doesn't have a start and select button but meh.
How to Sideload apps ==> http://forum.xda-developers.com/fire-tv/general/fire-tv-stick-how-to-sideload-install-t2954744
Limelight Use non rooted ==> https://github.com/limelight-stream/limelight-android/releases
Settings apk i downloaded from this ==> http://forum.xda-developers.com/showthread.php?t=2714494
Hey buddy, what is your complete set up like? Do you have a Dual Band router? Why are you getting 30 FPS? I should be getting my Stick soon so I am just wondering if 60 FPS is even possible on that hardware.
Also is that 720p30 or 1080p30?
Tested it at 1080p with 30 fps, dual band router, I have an ouya controller which i know works under andriod, but it doesn't have a start and select button, so i'm concidering getting one of the amazon controllers instead, the settings.apk will allow you to attach a bluetooth keyboard and mouse.
Okay thanks for getting back to us, one more question though; whats the benefit of side-loading limelight on there? Why not just get limelight from the Amazon's Appstore? I installed limelight from that store and it seems to be working fine, but I could not get my controller connected as of yet so couldn't fully test it.
how do you pair the moga to the fire tv? neither the controller setting in the UI finds it, nor the settings apk finds it but never says connected
I don't know, I don't have the moga, but you should be able to put it into bluetooth pairing mode and use the UI of the stick, it says it supports the moga.. I've paired an Ouya and a Nyko Playpad pro, which is what i'm currently using and works great (after firmware update) like a 360 controller.
works great but my bluetooth mouse is really laggy
rmg said:
works great but my bluetooth mouse is really laggy
Click to expand...
Click to collapse
Every input device in Limelight is going to be laggy. The FTV box is never going to get less than 40ms lag in Limelight no matter what, and the stick's specs are quite a bit worse than the box, so don't expect any miracles. I've been playing GTAV all day today through Limelight on my FTV and it works fairly well as long as auto aim is turned on, but precision aiming just isn't realistic with this much lag.
I got my Shield tv console delivered yesterday, (late as possible damn ups) and love it so far, haven't had enough time to play more, but after work today I will. I have an asus rtac68w, which according to nvidia is a held ready router, but I need to know what and how to set up my router to optimally perform for my shield tv and streaming.
Any help people?
The Shield is like any tablet or smartphone. There is nothing "special" to set up in the router for it
It's just highly recommended to use a wired connection for the Shield but have wifi configured too because they're known bugs with current firmware when the network isn't wifi. So sometimes you need to switch to wifi to do some stuff then back to wired for optimal performance. They'll fix this later I guess.
ps: go there : https://forums.geforce.com/default/board/159/ instead of XDA, you'll find official NVidia reps. XDA is ignoring the Shield Android TV so let's us leave.
Basically, to set it up best; Connect it to ethernet that goes straight into the router. That said, You want to make sure it connects to your 5GHz network, that your 5GHz network does not have legacy support enabled (AC only if possible with no N or A support). WMM and BeamForming is helpful sometimes. Those are the basics.
So, whatever you would do to optimize your WiFi for GameStream or GRID on the Shield Tablet or Shield Portable, you could do the same things here, plus the option of straight gigabit ethernet.
I hadn't heard of the issues with the Wired ethernet personally, hopefully they fix that pretty quickly. It may be specific to certain environments or other issues. Also, I know that the controllers use WiFi-Direct (rather than BT), however anything with that causing part of the networking fails would be pure speculation on my part.
I haven't had any issues with Ethernet
ryocoon said:
Also, I know that the controllers use WiFi-Direct (rather than BT), however anything with that causing part of the networking fails would be pure speculation on my part.
Click to expand...
Click to collapse
Actually it's the wired connection that 'might' mess with the initial controler pairing:
from a NVidia rep:
https://forums.geforce.com/default/topic/836884/?comment=4546797
If you are unable to pair your SHIELD Wireless Controller during initial setup and your SHIELD Android TV is connected to your network over ethernet, try temporarily disconnecting your ethernet cable to go into WiFi mode and check if pairing issue is fixed.
Click to expand...
Click to collapse
I haven't had problems either hardworking the console or using the Shield Tablet in console mode and using a Micro USB ethernet connector to hardwire the tablet. I must say that I get less lag streaming games in 4K from my PC using the console vs the tablet. I just wish I could sideload Amazon Prime Instant Video and M-Go so I could stream whatever 4K video content they offer besides only Netflix and YouTube video in 4K. No studdering, no buffering, just good quality 4K video from this thing. I must say, this console could have a major impact over how games could be delivered in the future. No latency at all except 1st person shooters being streamed via Grid. This is the best device I've bought in a long time.
I had some issues with DHCP when first setting up my unit on a wired connection. It kept disconnecting from the internet even when showing a connection. I set up my IP manually and updated to 1.2 and have had no issues since...it is super fast but may still setup wifi as you said just incase.
Rolldog said:
I haven't had problems either hardworking the console or using the Shield Tablet in console mode and using a Micro USB ethernet connector to hardwire the tablet. I must say that I get less lag streaming games in 4K from my PC using the console vs the tablet. I just wish I could sideload Amazon Prime Instant Video and M-Go so I could stream whatever 4K video content they offer besides only Netflix and YouTube video in 4K. No studdering, no buffering, just good quality 4K video from this thing. I must say, this console could have a major impact over how games could be delivered in the future. No latency at all except 1st person shooters being streamed via Grid. This is the best device I've bought in a long time.
Click to expand...
Click to collapse
What happens when you side load Amazon video and M-Go? I was able to side load a bunch of apps (including M-go but didn't run it yet) from my rooted samsung Note 2014 by backing up my apps with Titanium to the micro sd. I then moved the micro sd to the Shield TV and used ES File Explorer to auto open some of the zips that contained the APK and installed from there. From my memory, since I'm not at home to check what else I side loaded, I have the following working so far:
Chrome Browser
Dolphin Browser
Dropbox
Google Drive
Popcorn
Showbox
Helium
Facebook
Hulu Plus
Photo Circle
Speedtest
Ppsspp
And jut tested m-go
I'll add that when I first set up the Pro yesterday on a wired connection, it had all sorts of problems -- including not being able to download the update. Had to go wireless to get the update, but by that point it was acting so strange I did a full factory reset right after. (1.0 seemed quite buggy, but 1.2 feels fantastic so far. HUGE strides!). Haven't had problems since.
kgersen said:
The Shield is like any tablet or smartphone. There is nothing "special" to set up in the router for it
It's just highly recommended to use a wired connection for the Shield but have wifi configured too because they're known bugs with current firmware when the network isn't wifi. So sometimes you need to switch to wifi to do some stuff then back to wired for optimal performance. They'll fix this later I guess.
ps: go there : https://forums.geforce.com/default/board/159/ instead of XDA, you'll find official NVidia reps. XDA is ignoring the Shield Android TV so let's us leave.
Click to expand...
Click to collapse
The only problem I have with the GeForce forum is there is no way to be notified if you get a reply from anyone. Is there any work around for this?
lartomar2002 said:
The only problem I have with the GeForce forum is there is no way to be notified if you get a reply from anyone. Is there any work around for this?
Click to expand...
Click to collapse
not that I know of. The NVidia forum software is very old and bad, everyone agree on that.
I use Feedly and a RSS subscription to monitor the GeForce forum, it's a bit easier.
I have Amazon Prime Video sideloaded, and it works great. Unfortunately, I think a different version utilizes UHD video because I haven't been able to find any 4K content. Netflix and YouTube have some 4K content, and I've been able to stream some games in 4K, but until the UHD content providers start releasing their content to more devices instead of them signing exclusivity contracts (Samsung) to help them offset the royalties on the H.265 content, which is quadruple what H.264 was, I think most people will be limited on 4K content. Sucks.....
Hello all,
The main reason I bought an Nvidia Shield Android TV was to replace my PS3 as a media server and most importantly to free up my desktop so my wife could use it for her work.
However, I've since discovered that the shield game streaming facility uses up the monitors, keyboard and mouse, rendering the desktop PC a complete slave to the shield console, it doesn't stream the game silently in the background like say a media server would like plex or whatever.
I've tried installing the drivers for the onboard graphics card, sticking a HDMI cable in the back of one of the monitors and using the onboard HDMI, using that monitor's interface as the primary one so my wife could use it, but when I try and stream a game on the shield it just tells me that the GeForce GPU needs to be the primary source.
A bit annoying, I might need to fork out some money on a new machine just so she can use the desk, we don't have much room in the house.
I can't really think of any other way to get around this. Anyone else had any luck??
any help would be greatly appreciated!!
many thanks
Antóin
As far as I have seen there is no software to do what your wanting.
darhoade said:
As far as I have seen there is no software to do what your wanting.
Click to expand...
Click to collapse
That is truly a bummer...
antoin_currie said:
Hello all,
The main reason I bought an Nvidia Shield Android TV was to replace my PS3 as a media server and most importantly to free up my desktop so my wife could use it for her work.
However, I've since discovered that the shield game streaming facility uses up the monitors, keyboard and mouse, rendering the desktop PC a complete slave to the shield console, it doesn't stream the game silently in the background like say a media server would like plex or whatever.
I've tried installing the drivers for the onboard graphics card, sticking a HDMI cable in the back of one of the monitors and using the onboard HDMI, using that monitor's interface as the primary one so my wife could use it, but when I try and stream a game on the shield it just tells me that the GeForce GPU needs to be the primary source.
A bit annoying, I might need to fork out some money on a new machine just so she can use the desk, we don't have much room in the house.
I can't really think of any other way to get around this. Anyone else had any luck??
any help would be greatly appreciated!!
many thanks
Antóin
Click to expand...
Click to collapse
I guess you misunderstood what they meant by streaming the game form your pc. All your Shield TV is doing is being a controller basically. Your PC is actually sending a h.264 video of what is on your PC to your Shield TV.
lol
I agree, I wish it did it in the background as well. Hopefully that is the option in the future as streaming matures. I'd take a slightly lower quality (720p 60fps) if it meant my wife could use the PC while I stream a game.
try this with most of your games on your current machine as is. while yes there might be a few you can multitask with, alot of apps and programs require "focus". focus is what happens when your background windows jump to the foreground. you cant click on and interact with background windows without putting them into focus. yes you can leave them running but games require this same interaction. its just the way most operating systems and programs work.
again, yes i realize that some games do allow this, but not all, as it comes down to how the game is programmed, therefore its not nvidia's fault. Some games dont even allow you to play with the gamepad if the game is not in focus. Hope this helps better understand the situation.
Hello, do you can turn monitor off?
I have my M.O.J.O. in my living room and I use it for SPMC(kodi)/NetFlix/Hulu/etc and not much gaming. But I was researching and came across articles such as https://www.engadget.com/2013/11/10/nvidia-gamestream-third-party-devices/
So, the question is: Did nvidia gamestream capabilities ever make it over to the M.O.J.O. or was it all just hype on Mad Catz's part to sell more units? And if it was never officially brought over to the M.O.J.O., is it still possible? Or is it just a waste of time and energy at this point?
I'm looking at wanting to possibly play some pc steam games from the comfort of my living room, so I'm entertaining all options at this point. Do I sell the M.O.J.O. and by a Shield TV? Do I buy a Steam Link? Are there other options?
Hi @greevedogg It did make it to the MOJO... only via a third party client. The project is called Moonlight
It works amazingly well, I've played for hours streaming from my PC to my MOJO
A couple of suggestions: Firstly I found my MOJO starts jittering after playing on in for anything over half an hour. I eventually found out that the MOJO was over heating. I guess it's working pretty hard with all that streaming. I found that if i stand it on it's side, leaving a little gap underneath, there will be better airflow, and it no longer jitters.
Also they suggest using ethernet instead of WIFI, I can agree with this, you get serious lag if you play over WIFI... don't even try it. I play on an ethernet over power adapter and it works perfectly.
You need at least an Nvidia 650 card, and I found it necessary to manually add some games, as they weren't always detected by the Nvidia client.
High FPS games worked perfectly - like DIRT3 but point and clicks are more fun when lying on the couch - have fun with your MOJO
You can find the play store link here: https://play.google.com/store/apps/details?id=com.limelight.root
And the project homepage here: http://moonlight-stream.com/
Thanks @timjharvey! Yeah, I actually stumbled upon the Moonlight option after posting this thread! I had 2 Radeon 1gb video cards in crossfire set up on my pc, but I just switched them out for a 4gb GTX 1050 Ti card, so I could try out Moonlight. Like you said, it works surprising well, from what I have tested out so far... I only tried Counterstrike: Source for a brief moment the other night with a crappy BT keyboard. In the near future, I'll hook up a better set up and load up another game. I am hard-wired with ethernet, so it's pretty snappy there. Traditionally, I'm more of a keyboard and mouse gamer, but I might try to get used to the C.T.R.L.R. if it'll map out keys correctly...I think I'll also try to hook up the good kb & m just for s & g's. Thanks again for the input!
greevedogg said:
I have my M.O.J.O. in my living room and I use it for SPMC(kodi)/NetFlix/Hulu/etc and not much gaming. But I was researching and came across articles such as https://www.engadget.com/2013/11/10/nvidia-gamestream-third-party-devices/
So, the question is: Did nvidia gamestream capabilities ever make it over to the M.O.J.O. or was it all just hype on Mad Catz's part to sell more units? And if it was never officially brought over to the M.O.J.O., is it still possible? Or is it just a waste of time and energy at this point?
I'm looking at wanting to possibly play some pc steam games from the comfort of my living room, so I'm entertaining all options at this point. Do I sell the M.O.J.O. and by a Shield TV? Do I buy a Steam Link? Are there other options?
Click to expand...
Click to collapse
timjharvey said:
Hi @greevedogg It did make it to the MOJO... only via a third party client. The project is called Moonlight
It works amazingly well, I've played for hours streaming from my PC to my MOJO
A couple of suggestions: Firstly I found my MOJO starts jittering after playing on in for anything over half an hour. I eventually found out that the MOJO was over heating. I guess it's working pretty hard with all that streaming. I found that if i stand it on it's side, leaving a little gap underneath, there will be better airflow, and it no longer jitters.
Also they suggest using ethernet instead of WIFI, I can agree with this, you get serious lag if you play over WIFI... don't even try it. I play on an ethernet over power adapter and it works perfectly.
You need at least an Nvidia 650 card, and I found it necessary to manually add some games, as they weren't always detected by the Nvidia client.
High FPS games worked perfectly - like DIRT3 but point and clicks are more fun when lying on the couch - have fun with your MOJO
You can find the play store link here: https://play.google.com/store/apps/details?id=com.limelight.root
And the project homepage here: http://moonlight-stream.com/
Click to expand...
Click to collapse
this is about four years too late to save the mojo, but it should work https://liquidsky.com it brings true cloud gaming to your phone, tablet, laptop, pc , n of course the mojo and no you don't need a pc of any sort
What firmware are you use?
I have problem with position of mouse
My PC 1080p and my TV 1080p, but mouse cursor has bad position
How i can fix it
My Android 4.2.2 - last official
wave_is said:
What firmware are you use?
I have problem with position of mouse
My PC 1080p and my TV 1080p, but mouse cursor has bad position
How i can fix it
My Android 4.2.2 - last official
Click to expand...
Click to collapse
Hi @wave_js I'm running Remix OS - mainly because Netflix also works on this rom. What game are you having mouse cursor issues with? Is the game that you are having cursor issues with running at 1080?