Related
This used to be easy.
After 8 hours yesterday I think I managed to root the phone. CWM/TWRP will not install. At all, under any method. Rom manager, goo manager, I now get this stupid message that says that "an application attempted to access something unauthorized and has been blocked" over and over.
Just trying to flash CM11 rom. Guess I need to learn how to sideload or something? I physically can't get my phone to recovery mode other than the stock Android, which does not have the "flash zip from sdcard" option.
For the love of god help me. My phone stopped working around 2 pm yesterday and I seriously can't believe I'm about to be going into day 2 of this, so rather than drive myself crazy i'm going to wait for help
bump please help should be simple
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
XxLordxX said:
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
Click to expand...
Click to collapse
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Damani311 said:
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Click to expand...
Click to collapse
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
also trying to flash TWRP
its just all failing on the install
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
XxLordxX said:
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
Click to expand...
Click to collapse
its the official samsung cable. and yes i tried others
tried other versions of odin as well
and different versions of both twrp and cwm
its crazy i tells ya xD
If it fails to flash true Odin, then you are doing something wrong.
- Different pc
- Reinstall drivers
- Different cable
- Different usb port
- Make sure kies is not running in the background
What are you running? Windows 8? Try a windows 7 pc.
Post the details of the error you are getting.
Also when the flash goes succesfull, but you still don't have a custom recovery, then uncheck auto-reboot.
can someone please link me to a guaranteed working version of a flashable recovery for odin ?
I know its a lot to ask but I've actually gone through almost that entire list you listed
tried diff cables
no kies runnning
on windows 7
drivers been installed twice
maybe i should try the other port, but in case that doesnt work can anyone just link me? sorry i've just never had this much problems with this, must be b/c of the new security knox update or w/e in oct of last year. Last June I did all this in about 15 minutes....
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
dwarfer66 said:
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
Click to expand...
Click to collapse
that's crazy
so where do i find this windows installer? i'm just trying to put CM on there so I suppose this would work
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
189cutter said:
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
Click to expand...
Click to collapse
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Damani311 said:
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Click to expand...
Click to collapse
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
dwarfer66 said:
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
Click to expand...
Click to collapse
thanks, but naturally this would be too easy
says: "not supported on your device"
a freaking S4 AT&T! what the ****?
From what I've read AT&T have locked bootloaders. Glad I have an unlocked Australian version!
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Damani311 said:
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Click to expand...
Click to collapse
So do you have an AT&T phone? If you do, you are in the wrong section of the forum.
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
go to sammobile.com and search for your model there
kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.
kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks
if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?
........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO
Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app
Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.
First, I have installed a ROM on my phone before and I followed very specific instructions. I am a developer in the land of microsoft so I recognize I am very much a newbie here.
Now, on to what I have now and what I want to do.
1. I have a Note 3. The SM-N9005. The baseband version is: N900W8.... suffice to say it is a canadian phone. If the rest of the baseband numbers are important I will post them, just ask.
2. I want to install the Alliance ROM, it seems to have what I am looking for.
3. When I rooted and ROMed my phone years ago I used the following thread: http://forum.xda-developers.com/show....php?t=2614772
4. Currently my phone is running a Jedi ROM from the vintage of that thread. However I must have made a mistake back then because the Hotspot feature does not work. Making the hotspot feature work again is my primary reason for undertaking this operation. The 4G works, I can use the Internet on the phone just fine. The wireless works I can connect to a wireless signal and use the internet that way (I confirmed this was working with mobile data off). The hotspot will allow a connection from a device (such as my laptop), but no data passes between the 4G connection and the connected computer.(yes, I turned on Mobile Data On) I have tried this using different computers connected to the hotspot to confirm it is the fault of the Note3.
Back when I did this flashing thing before I had to be careful to get the right CSC file and modem file and a few other steps. I had to specify the correct CSC file in addition to the rom I wanted to flash.
With that background, my questions are below (if you need any more info to point me in the right direction, just ask):
One last note... I will be performing any and all instructions from a macbook pro Mid 2012 with no other devices on the usb host controller running a near virgin copy of windows 7.
-----------------------------------------------------------
Do I need to worry about CSC files, modem files and so on to Flash to Alliance ROM and still have everything work? I ran across a thread that said that some ROMs have all the CSC files in them, but I cannot find any direct information (or I missed it) about the Alliance ROM with regards to CSC files and the like.
I thought I had TWRP installed, but when I boot to recovery the top two lines read
line1: Android system recovery <3e>
line2: KOT49H.N9005XXUENB4
Is this TWRP? Should I download the latest TWRP for my device and flash it using the AP button from Odin 3.10? If there is a different technique I should use, I will try it.
The instructions say that if I am not installing from stock 4.4.2 or stock 5.0 that I should install stock first, then install the alliance rom. I visited the sammobile website and there are no ROMs for the USA or Canada there... am I missing something or should I just use the UK ROM from that website? I guess I am not sure how to identify the correct ROM for Canada.
I did load the Alliance ROM 8.2 onto my SD card and attempted to use the option apply update from external storage and it failed. Nothing happened at all and the phone eventually rebooted and the ROM never installed.
Thanks in advance for any help you can provide me on this endeavour. I am largely looking for resources that I have not been able to find up until now. I am okay with help such as Read This Post! and so on.
If the phone is an n9005, not sure how the baseband can be n900w8 as the n9005 was never sold by Canadian carriers as far as I know.
Here's a link to the stock n900w8 firmware: http://www.sammobile.com/firmwares/database/SM-N900W8/
wizengamot said:
Thanks in advance for any help you can provide me on this endeavour. I am largely looking for resources that I have not been able to find up until now. I am okay with help such as Read This Post! and so on.
Click to expand...
Click to collapse
First of all, you should detect what device you own. You can install this APP and add some screenshots for avoid problems and give us more info about your device (IMEI not necessary).
We will try to detect if you own a clone, a SM-N9005 or SM-N900W8.
Additional Info as requested
Here are the screenshots that were requested. Thanks for your help. Yes, I will and continue to use the thanks button as well.
wizengamot said:
Here are the screenshots that were requested. Thanks for your help. Yes, I will and continue to use the thanks button as well.
Click to expand...
Click to collapse
I think you should flash the stock rom first via ODIN. Coz your baseband don't fit with your bootloader and your PDA either.
PS: You can use MEGA mirror as well :highfive:
I have the stock ROM from SamMobile. I am set to flash the phone. I have everything set but I searched the forum as a final check to make sure I am doing the right things and I found a post that says I need a PIT file. I can find a PIT file for HLTE verizon phones but I do not know if that PIT file works with the image I downloaded from sammobile. Of course I am connecting the dots from the info program I ran where is says on the general tab that the phone is of type hlte.
When I click on PIT in Odin it says this function is for engineers only. As a programmer myself I would put a message like that for a function I don't want people using needlessly but it does give me pause to ask about it. As they say Flash in Haste...Cry at Leisure..
Many thanks to you all. I have installed the stock ROM and it works. I can make phone calls, wifi works, 4g works, and hotspot works.. YAYA... Now, I would do the alliance rom but I can honestly say I am not sure I want to mess with it. I want the phone call recording feature but that is all I want...It would be the only reason to do the alliance rom. And it appears as though that rom is not done the same way as the stock rom as there is no md5 file.
anyhow.. thanks again to all who helped. I have thanked each post as well. If you have some tips based on my above info, I would be very grateful.
There are quite a lot of call recording apps which work well as far as I know, ACR being one of the example.
Only tar or tar.md5 files are flashed in Odin. Any non-stock ROMs are flashed using a custom recovery.
You can flash a custom recovery to your phone using Odin in the PDA/AP box from here: https://twrp.me/Devices/ Just use the latest tar file.
Once you have a custom recovery on the phone, you can create a backup of your existing ROM, then flash a custom ROM.
Hi Everyone,
Sorry for creating a new thread. My wife's Note 3 is currently stuck up in a boot loop. It just happened one day and we couldn't figure out what causes it.
The phone is still untouched - stock ROM, unrooted, network-locked.
I'm not new in the rooting process and everything, I just want to basically have some sort of peace of mind in asking you these:
1. Does rooting solve the phone's problem? I'm gonna flash a custom ROM afterwards, any suggestions?
2. Does rooting unlocks the phone itself? Or will it remain network-locked?
Thanks in advance!
1. Does rooting solve the phone's problem?
NO it does nothing bar unlock access to system .
2. Does rooting unlocks the phone itself
No it has nothing to do with network lock .
What model phone is it .
JJEgan said:
1. Does rooting solve the phone's problem?
NO it does nothing bar unlock access to system .
2. Does rooting unlocks the phone itself
No it has nothing to do with network lock .
What model phone is it .
Click to expand...
Click to collapse
Hi, thanks for replying. It's the N9005 model.
Any idea on how to solve the phone's problem? Can I just simply flash a new ROM or something?
Yes you can flash a new stock rom via Odin .
Find stock ROM for device HERE.
Make sure you get proper files. Things you need
-USB Drivers Latest
-Stock Rom
-Odin
-Other necessary file.
NOTE: Make sure you enter correct model number and select country for getting correct STOCK ROM.
Salman
If I helped you please Click on Thanks Button
Salman Al-Badgail said:
Find stock ROM for device HERE.
Make sure you get proper files. Things you need
-USB Drivers Latest
-Stock Rom
-Odin
-Other necessary file.
NOTE: Make sure you enter correct model number and select country for getting correct STOCK ROM.
Salman
If I helped you please Click on Thanks Button
Click to expand...
Click to collapse
Hi, thank you. Problem is now solved.
lawgone said:
Hi, thank you. Problem is now solved.
Click to expand...
Click to collapse
Great
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my english is too bad, but I tried, I know that someone else have the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Flash latest stock with csc, but skip bl section
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Try clean formatting
Arachnorbit said:
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Click to expand...
Click to collapse
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
invinsible_asp said:
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
Click to expand...
Click to collapse
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Arachnorbit said:
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Click to expand...
Click to collapse
Download the latest firmware from https://updato.com (it's fast and reliable) then start in download mode, run odin with administrative privileges, select BL AP Modem and CSC (dont use home since we wish to clean fornat), and in odin uncheck auto reboot option, after the ODIN shows 'pass', disconnect the cord from pc, now you have to be very quick here since our battery is not removable, in order to shut down s7 edge from odin mode, all you have to do is press, volume down, volume up, home and power and as soon as it goes off connect the cord, the battery will show up and now it will be in charging state, after that disconnect the cord, (the phone is now clean fornatted and in off stage) and now boot into recovery to wipe data and cache using default recovery, then reboot phone and then log into your existing google account.
I know its tricky and maybe there's an ez way around it but this worked for me so I'm sharing
SOLUTION, thank you all for your answers!
AndyBury said:
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I tried it at first instance but I could not because my Bootloader was updated to the "U2" version, what I did after that was search the Combination file updated to the U2 bootloader, after a long search I found it.
In resume, The solution is what the OP of that thread says but if you have the same problem like me with the Updated bootloader you need this file instead of the files that are shown there:
https://androidfilehost.com/?fid=890129502657582963
Thank you all! I hope this can help y'all that has this problem! :fingers-crossed:
i am same problem ,how to fix it?
help me
jed0123 said:
help meView attachment 4491615
Click to expand...
Click to collapse
You already fixed the problem I guess, you only need to flash the same firmware that your phone had before flashing the Combination file.
can not
Help
How to know what was my old firmware version? when I try to flash i get SW REV. CHECK FAIL. DEVICE: 2. Binary: 1
And I can't start phone because I'm getting FRP lock. Please help me?
Edit: I downloaded latest firmware and flashed it.
Same problem with s8+
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
I have the same problem with my S8+ SM-G955F
I flashed the latest firmware without BL....now my phone is working fine...but I dont have SIGNAL.. any help will be appreciated..
Moved
Thread moved to Questions and Answers.
hello.
im having the exactly same issue....
Im from Brazil, i was trying to install the stock rom then ill upgrade to android 8.0....(my android does not update becouse it from VIVO PROVIDER, my english sucks...hope you understand)
i open odin, select all files, of a stock rom ZTO G935F, then it just give me this error...
how can i fix it? i just want to install android 8.0 nougat =(
thx alot for trying help me!!!
i fixed my phone by skipping the booloader section...
you're a life saver brother...
Thank you
Regards
Arachnorbit said:
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my English is too bad, but I tried, I know that someone else has the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Click to expand...
Click to collapse
try custom ROMs and I'm sure they have update bootloader and modem use that and its work in my phone
jed0123 said:
can notView attachment 4491806
Click to expand...
Click to collapse
Hello, how did you solve it?
Help I keep getting SW REV. CHECK FAIL. DEVICE:3. BINARY:2 when trying to downgrade BL CP for G935W8