Details: after trying to flash cloudyg2 3.3 (on f320k) I got my phone bricked when it boots I see red notificiation led then after a few mins lg logo comes up in bootloop. I plug the phone out and try rebooting and the phone wont reboot. my pc does the sound of something was entered when I plugged it but nothing appears. HELP
sorry for bad English if bad. my phone was low on battery when done. help btw my phone does the same action once in a while
am I screwed?
another edit: I got into recovery. gonna let my phone charge in recovery abit. hope it will get some juice back
Another Edit I got it fixed by messing up with a few backups in twrp XD
yuvarregev1 said:
Details: after trying to flash cloudyg2 3.3 (on f320k) I got my phone bricked when it boots I see red notificiation led then after a few mins lg logo comes up in bootloop. I plug the phone out and try rebooting and the phone wont reboot. my pc does the sound of something was entered when I plugged it but nothing appears. HELP
sorry for bad English if bad. my phone was low on battery when done. help btw my phone does the same action once in a while
am I screwed?
another edit: I got into recovery. gonna let my phone charge in recovery abit. hope it will get some juice back
Another Edit I got it fixed by messing up with a few backups in twrp XD
Click to expand...
Click to collapse
Mods you can close the thread I fixed it and learned a lesson. DONT FLASH ROMS WHEN 3% LEFT
Related
Looking for some help, my phone broke so a friend gave me his old g1 that has been rooted. when i power on the phone i get stuck in the boot cyctle of the g1 logo and then off and the repete.
i cant get the g1 to do a restore, the only change i can get is when i hold the back key when i turn it on. i get the rainbow scree and "serial 0" cant get into fast boot....
if possible i would like to get this device usable and even better with a cstm rom and froyo or what ever is reccommended.
any help would be amazing.
a small update, i did get it to boot recovery mode once, so i rebooted the phone and android started. i got a low battery notice and pluged in the usb cable and it imeditaly rebooted and started the cycle over and over agian. i have not clue why that time it actualy booted, i let the battery charge for 30min and tried agian with no luck.
Ok, so I have a Bell atrix and followed the instructions on this thread to install GreyBlur:
http://forum.xda-developers.com/showthread.php?t=1070076
I have not done deodex on the phone.
My phone ran out of battery and shut down, so I plugged it into the wall with the moto charger and the red logo came on, but then froze. Usually the battery charge status would come on (before i installed GreyBlur). But now it just gets stuck on the red M logo. If i unplug the phone, remove battery, install back in and turn on the phone without the cable, the phone turns on fine and i can charge it with the wall charger after the phone is booted. But not when the phone is turned off.
anyone knows why?
protip 1# change thread title to relate to the problem you face instead of 'OMGZ LOLZOR HELP MEEEE!!!!' you will get more responses
now for your help
a few things: do you have Tenfers CWM installed? im assuming you do as you are trying to do Greyblur
sounds like to me the phone is bootlooping. my solution would be to start clean with a frsh SBF install as this will be the quickest solution
I changed the title, thanks for the tip
Yes i do have CWM installed.
I have already installed greyblur with no problem as i followed the instructions that were provided in the link above.
There is nothing wrong with the phone as long as it is not plugged in to the charger. It boots just fine and loads greyblur. But as soon as I shut the phone down and plug the charger, it gets stuck on the M logo.
I am kind of a noob and would appreciate it if you tell me what you mean by 'installing a fresh SBF'
thank you
Hey there,
you may want to make sure that you set the system recovery app back to charge mode as this may be causing your error.
^^^ thank you so much. I tried what you said and it worked
glad to help
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
seasen said:
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
Click to expand...
Click to collapse
This happend to me with my LS980, heres what I did, i waited until my G2 was fully charged, i knew it was fully charged becuase in download mode you should see the letter B, the letter B indicates the battery, if your battery is at "B100" detach your phone from the charger, hold the power button for the phone to restart, and quickly press and hold the power button and the volume down button at thw same time,, repeat this step again quicly after the Boot Logo shows up, and you should boot into Recovery Mode and restore your backup.
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
I tried that for like a 100 times, it wont start into recovery. it just starts back to the splashscreen.
trying this now : http://forum.xda-developers.com/showthread.php?t=2432476
howw to charge the phone when it on bootloop,whenever i plugged the cable its start bootloop
Hello. I got myself a lg g2 not too long ago, and i installed a custom rom on it. (Blisspop) And it worked pretty well, except for when i started it, sometimes it would go in a boot loop and i had to power it off and then on, but except for that it was good. Then one day i turned it off, and when i tried to turn the phone on again, noting happened. And i mean it. NOTHING. I tried to plug it in to my computer but it acted like a disc?! It's so weird. And when i charge it, the led flash blinks red but nothing more. HELP!
Try if you could get it into download mode(Volume up while plugging in USB).
If so you can revert to stock ROM.
Sent from my LG-LS980 using Tapatalk
xTechNoah said:
Hello. I got myself a lg g2 not too long ago, and i installed a custom rom on it. (Blisspop) And it worked pretty well, except for when i started it, sometimes it would go in a boot loop and i had to power it off and then on, but except for that it was good. Then one day i turned it off, and when i tried to turn the phone on again, noting happened. And i mean it. NOTHING. I tried to plug it in to my computer but it acted like a disc?! It's so weird. And when i charge it, the led flash blinks red but nothing more. HELP!
Click to expand...
Click to collapse
I think it is still a soft bricked, there's still a 'life sign' from that blinking led. can you get to the recovery mode at least? if no, get to download mode and try to flash your stock KDZ or TOT.
hi guys..so I was using phronesis rom on my Korean note 3 with custom kernel..when I used to turn the phone on it to say set warranty bit kernel on the top and used to get stuck at the logo then I would remove the battery and turn it on again and it would turn on..but yesterday my phone turned off automatically and was stuck in bootloop.it was not booting into twrp..so I flashed stock rom via odin but the bootloop was still there and I can not boot into recovery it would just restart and go back to booting normally and again bootloop..but if I remove the battery for a few minutes and then turn it on it works fine until i turn it off..now
thanks in advance.
Axad101 said:
hi guys..so I was using phronesis rom on my Korean note 3 with custom kernel..when I used to turn the phone on it to say set warranty bit kernel on the top and used to get stuck at the logo then I would remove the battery and turn it on again and it would turn on..but yesterday my phone turned off automatically and was stuck in bootloop.it was not booting into twrp..so I flashed stock rom via odin but the bootloop was still there and I can not boot into recovery it would just restart and go back to booting normally and again bootloop..but if I remove the battery for a few minutes and then turn it on it works fine until i turn it off..now
thanks in advance.
Click to expand...
Click to collapse
From what I can tell, a possible issue you could have is with the battery. I used to have this problem, my phone would re-start for no apparent reason, couldn't even get to recovery. I switched the battery for another and it worked again. So maybe you could try that
ShaDisNX255 said:
From what I can tell, a possible issue you could have is with the battery. I used to have this problem, my phone would re-start for no apparent reason, couldn't even get to recovery. I switched the battery for another and it worked again. So maybe you could try that
Click to expand...
Click to collapse
thanks for the reply sir..i will give it a shot and would let you know ASAP..
Got a sm-n900k last year on vacation and same problem please someone help fix this!!!!!
Leontina said:
Got a sm-n900k last year on vacation and same problem please someone help fix this!!!!!
Click to expand...
Click to collapse
Well buddy in my case it was not a battery issue..and after few times my phone is not even turning on its dead..:crying: