Of6 update - Sprint Galaxy S 5 General

Incoming update to OF6. Sprint's website shows it comes out today
http://support.sprint.com/support/a...pdateTheSoftwareVersionOnYourSamsungGalaxy#!/
Its the same version that Samsung has had on their page for the past 2+ weeks.
I just updated using Kies. It is still 5.0.

Jay5583 said:
Incoming update to OF6. Sprint's website shows it comes out today
http://support.sprint.com/support/a...pdateTheSoftwareVersionOnYourSamsungGalaxy#!/
Its the same version that Samsung has had on their page for the past 2+ weeks.
I just updated using Kies. It is still 5.0.
Click to expand...
Click to collapse
Posted here, we have an RDF thread already established:
RDF Discussion Thread for Sprint Galaxy S5 (SM-G900P)

how to root this new firmware G900PVPU3BOF6 for s5 sprint?
tanks in advance.. @tdunham
---------- Post added at 03:46 PM ---------- Previous post was at 03:08 PM ----------
yeahhh f.. root in s5 G900PVPU3BOF6 with superSU 2.49
tanks to myself ....

rubbem06 said:
how to root this new firmware G900PVPU3BOF6 for s5 sprint?
tanks in advance.. @tdunham
---------- Post added at 03:46 PM ---------- Previous post was at 03:08 PM ----------
yeahhh f.. root in s5 G900PVPU3BOF6 with superSU 2.49
tanks to myself ....
Click to expand...
Click to collapse
To root after you update, you need to do the following:
1. Boot the phone and let it load.
2. Go to Settings>Security> Unckeck Reactivation Lock
3. Boot back to Recovery and run AutoRoot and a custom Recovery.

jonkempato said:
To root after you update, you need to do the following:
1. Boot the phone and let it load.
2. Go to Settings>Security> Unckeck Reactivation Lock
3. Boot back to Recovery and run AutoRoot and a custom Recovery.
Click to expand...
Click to collapse
It is much easier than that,,,
just install v2.49 BETA-SuperSU for recovery and ready ..
Please enable debug mode and security -Origins unknown and ready ..
1_ flash firmware OF6
2_ activate debug mode
3_ enter mode Download and install the recovery (TWPR)
4_ now download the BETA-SuperSU v2.49.zip and install it from recovery
5_ ready ... you are root and have recovery ...
Regards ...
PD: I not need help .. so I put
.. Thanks to.. myself ...

question @tdunham you think the xposed people were using will still work for this update considering they added a bunch of new security settings? i just want a little insight before i try to flash it through recovery haha

Maurylucha said:
question @tdunham you think the xposed people were using will still work for this update considering they added a bunch of new security settings? i just want a little insight before i try to flash it through recovery haha
Click to expand...
Click to collapse
It should but you have to install the lollipop version and there is only limited support for lollipop. I cant remember where the links are for that one, I don't use it really for anything.

Awww I got that sdk 21 expected 22 error got bootloop but thank God for nandroid backups! Haha
Sent from my SM-G900P using XDA Free mobile app

rubbem06 said:
It is much easier than that,,,
just install v2.49 BETA-SuperSU for recovery and ready ..
Please enable debug mode and security -Origins unknown and ready ..
1_ flash firmware OF6
2_ activate debug mode
3_ enter mode Download and install the recovery (TWPR)
4_ now download the BETA-SuperSU v2.49.zip and install it from recovery
5_ ready ... you are root and have recovery ...
Regards ...
PD: I not need help .. so I put
.. Thanks to.. myself ...
Click to expand...
Click to collapse
Just tried this and it put me back to OA6.

Related

23.4.A.1.232 prerooted generic Canada spg512

Not sure if this of value of anyone. I root these for my own device and though I would share in case its of value to someone else.
My steps to create:
1. Sony PC Companion to download update for my device/region
2. Flashtool to decrypt
3. Flashtool to build ftf with all 3 .ta portions removed
4. PRFCreator to root and zip
PRFCreator Log:
https://mega.nz/#!5Q0TnQ7J!maAygmSD99E_5JrPCqpu3QCMfluXzP9_SBEKQ2MPRoU
23.4.A.1.232 prerooted generic Canada spg512 zip image:
https://mega.nz/#!9BMnlaKY!Ix0ebnU3nMO3b3F4Q2O-J9qwqbgnaN_PnJqR_nCIY5k
I have flashed this image onto my spg512 with TWRP with no issue.
the download site is asking for an encryption key.... what should I enter?
jismail said:
the download site is asking for an encryption key.... what should I enter?
Click to expand...
Click to collapse
Bump, I would like to use this also but can't download without the key.
Yes, please provide the encryption key for us to download. Thanks.
sorry, didn't realize there was a second option to get a link off mega. should work now.
Rusty_Gunn said:
sorry, didn't realize there was a second option to get a link off mega. should work now.
Click to expand...
Click to collapse
Great, I downloaded and flashed it successfully. It works like a charm. Thanks.
Now I am trying to find out what are the difference in this Canadian version.
Delete
Hi iam New here. I have a question... i have Flash this Rom but i have Not R/W rights on System Rom ... Superuser is installed and root access are okay... Why does Not rights on System Rom... The last Custom rom was 4.4.4 with used easy root Tool v8.... Can i help me? Thanks
Xmc10ki284 said:
Hi iam New here. I have a question... i have Flash this Rom but i have Not R/W rights on System Rom ... Superuser is installed and root access are okay... Why does Not rights on System Rom... The last Custom rom was 4.4.4 with used easy root Tool v8.... Can i help me? Thanks
Click to expand...
Click to collapse
I just went through this ordeal. There is a lollipop version of dual recovery here . You need to flash the flashable version of it through recovery and it will give you write access. You are probably using a Kit Kat version of dual recovery that doesn't disable lollipop simlock.
many thanks for the quick response. can I get this recovery "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable.zip" for the sgp512 simple flash or something else must take place only before ... thanks:good:
You want 2.8.22 zip file. Flash in recovery. Done.
Thank you so much for the great help .... everything works great ... keep it up :good:
---------- Post added at 06:08 PM ---------- Previous post was at 05:37 PM ----------
after the flash has to be sure everything is reset or .... thanks
I have sgp512 with 23.4.1.200 how to install this rom, usually I flash with FTF file but the first time I got image with lot of .sin files how to do please sorry for my noob question
mine isnt rooted, I know how to flash .zip under recovery menu but I cant find how to root mine
Help
how did you get TWRP on your spg512? On their page in doesn't support Xperia z2 Tablets. Would really appreciate some help. Thanks
Good fit
This installed just perfectly. I like all the Sony apps and having root is a great bonus. Thanks Rusty!
---------- Post added at 08:05 PM ---------- Previous post was at 07:52 PM ----------
smitroadergirl said:
how did you get TWRP on your spg512? On their page in doesn't support Xperia z2 Tablets. Would really appreciate some help. Thanks
Click to expand...
Click to collapse
Not sure what version of firmware you are on, but you might need to downgrade to an older version, run NUTs or another method to flash a new recovery. I went back to a 17.x version and skipped all the setups at firstboot, enabled Developer tools,then USB debugging, allow apps to be installed, and all that nonsense, then I ran locked recovery install.bat.

How To root Galaxy S3 Neo (Gt-I9301I)

Hello is there a way to root My galaxy S3 Neo (Gt-I9301) Running Kitkat 4.4.2
Build: KOT49H.I9301IXXUAOF1
Band version: I9301IXXUAOD2
THANKS IN ADVANCE
Looking for the same solution.....
@Igor88sf @aziz_chargui I made a video here: https://www.youtube.com/watch?v=uqk-DyBBRV0
German Developer said:
@Igor88sf @aziz_chargui I made a video here: https://www.youtube.com/watch?v=uqk-DyBBRV0
Click to expand...
Click to collapse
Oh that was the way i rooted my phone thanks man .
I saw your videos on youtube and about roms so i wanna ask you which is the best rom for this device
@aziz_chargui Based on Android lollipop: Resurrection remix
Stock Based: Galaxy A5
German Developer said:
@aziz_chargui Based on Android lollipop: Resurrection remix
Stock Based: Galaxy A5
Click to expand...
Click to collapse
thanks a lot you but do i need cwm recovry or it works with TWRP ??
aziz_chargui said:
thanks a lot you but do i need cwm recovry or it works with TWRP ??
Click to expand...
Click to collapse
Everything will work with cwm I tested it myself
I will check it and will tell you if it works @German Developer
---------- Post added at 04:13 PM ---------- Previous post was at 04:05 PM ----------
But if I use different baseband? What is going to happen?
Igor88sf said:
I will check it and will tell you if it works @German Developer
---------- Post added at 04:13 PM ---------- Previous post was at 04:05 PM ----------
But if I use different baseband? What is going to happen?
Click to expand...
Click to collapse
Nothing it should work
German Developer said:
Everything will work with cwm I tested it myself
Click to expand...
Click to collapse
yes but i have TWRP recovery
I tried to install it and it works with TWRP Recovery.
aziz_chargui said:
yes but i have TWRP recovery
Click to expand...
Click to collapse
It should work with TWRP as well
New update on the topic! Bellow.
---------- Post added at 09:56 AM ---------- Previous post was at 09:20 AM ----------
[/COLOR]
German Developer said:
Nothing it should work
Click to expand...
Click to collapse
@German Developer it booted properly, but it doesn't work okay. Super SU wants and binary update, that fails when asks to disable KNOX. Also the root checker apps say that the device root access is not properly installed.
I followed the steps correctly, Odin showed message "Passed".
Just to make sure, these is the information about the firmware, device, baseband and etc.
drive.google.com/file/d/0BxGe8IsiTwDCZ24wWlFaQ0pFZkk/view?usp=sharing
Should I isntall the firmware of the tutorial. And if yes, where can I find the files?
Igor88sf said:
New update on the topic! Bellow.
---------- Post added at 09:56 AM ---------- Previous post was at 09:20 AM ----------
[/COLOR]
@German Developer it booted properly, but it doesn't work okay. Super SU wants and binary update, that fails when asks to disable KNOX. Also the root checker apps say that the device root access is not properly installed.
I followed the steps correctly, Odin showed message "Passed".
Just to make sure, these is the information about the firmware, device, baseband and etc.
drive.google.com/file/d/0BxGe8IsiTwDCZ24wWlFaQ0pFZkk/view?usp=sharing
Should I isntall the firmware of the tutorial. And if yes, where can I find the files?
Click to expand...
Click to collapse
No, you don't need to install another baseband you have everything correct, but did you followed these steps? http://androidmtk.com/root-samsung-galaxy-s3-neo-gt-i9301i
@German Developer, yeah man. All went perfect step by step. But root was unsuccessful. The Super SU is there. I can update it with market. But the binary fails to update. Can't see any apps in the super su. Should i install stock rom and firmware again and try the same
Igor88sf said:
@German Developer, yeah man. All went perfect step by step. But root was unsuccessful. The Super SU is there. I can update it with market. But the binary fails to update. Can't see any apps in the super su. Should i install stock rom and firmware again and try the same
Click to expand...
Click to collapse
I would recommend you to do it, but before flashing it back try your root with the on play store called "root checker" and than you can see if you have root
Igor88sf said:
New update on the topic! Bellow.
---------- Post added at 09:56 AM ---------- Previous post was at 09:20 AM ----------
[/COLOR]
@German Developer it booted properly, but it doesn't work okay. Super SU wants and binary update, that fails when asks to disable KNOX. Also the root checker apps say that the device root access is not properly installed.
I followed the steps correctly, Odin showed message "Passed".
Just to make sure, these is the information about the firmware, device, baseband and etc.
drive.google.com/file/d/0BxGe8IsiTwDCZ24wWlFaQ0pFZkk/view?usp=sharing
Should I isntall the firmware of the tutorial. And if yes, where can I find the files?
Click to expand...
Click to collapse
I have the same device with same build and baseband and it worked but have you disabled KNOX ?
German Developer said:
I would recommend you to do it, but before flashing it back try your root with the on play store called "root checker" and than you can see if you have root
Click to expand...
Click to collapse
At the moment with root checker shows message "Root access is not properly installed on this device".
Pavlex4 said:
I tried to install it and it works with TWRP Recovery.
Click to expand...
Click to collapse
Thanks man
aziz_chargui said:
I have the same device with same build and baseband and it worked but have you disabled KNOX ?
Click to expand...
Click to collapse
Super SU tries to disable KNOX, and after 2-3 minutes says it cannot remove it.
Isn't it easier just to install TWRP and custom rooted rom?

Is there any customs roms for the SM-G530W ?? Newbie HERE!

I have managed to root my Grand Prime SM-G530W and even disabled that FRP lock thing that made my phone stuck in reboot mode after i rooted it. Now my phone is rooted and it works soo i dont know what next. Any help? Kinda lost lol. was a iphone user before soo this is all new stuff to me
How did you get by the FRP?
how did you manage to root the phone? i have been trying for days now
Go in developer settings. Disable Oem Lock. something like that. Then enabled Oem Unlocking. Root and it will bypass.
check this thread for FRP Lock solution
123wish said:
How did you get by the FRP?
Click to expand...
Click to collapse
https://forum.xda-developers.com/gr...locked-frp-t3266961/post70604083#post70604083
Don't forget to push thanks button if this was helpful
---------- Post added at 02:17 ---------- Previous post was at 02:04 ----------
King_sharky said:
how did you manage to root the phone? i have been trying for days now
Click to expand...
Click to collapse
Go to this thread, download file: trapkernel... download Odin. Start Odin. boot your phone in download mode (menu+power+vol down). Flash file through Odin on PDA mode. Reboot and done. :fingers-crossed:
https://forum.xda-developers.com/grand-prime/development/kernel-root-root-sm-g530t-5-1-1-t3203476
Don't forget to hit thank you if this was helpful
Freelancer said:
https://forum.xda-developers.com/gr...locked-frp-t3266961/post70604083#post70604083
Don't forget to push thanks button if this was helpful
---------- Post added at 02:17 ---------- Previous post was at 02:04 ----------
Go to this thread, download file: trapkernel... download Odin. Start Odin. boot your phone in download mode (menu+power+vol down). Flash file through Odin on PDA mode. Reboot and done. :fingers-crossed:
https://forum.xda-developers.com/grand-prime/development/kernel-root-root-sm-g530t-5-1-1-t3203476
Don't forget to hit thank you if this was helpful
Click to expand...
Click to collapse
Lots of thanks to xda Developers. Thanks guys
Just don't forget about installing TWRP and XPosed to enjoy Freedom... As we all know, freedom is always free!
Pereira04 said:
I have managed to root my Grand Prime SM-G530W and even disabled that FRP lock thing that made my phone stuck in reboot mode after i rooted it. Now my phone is rooted and it works soo i dont know what next. Any help? Kinda lost lol. was a iphone user before soo this is all new stuff to me
Click to expand...
Click to collapse
LOS 13.0 : https://forum.xda-developers.com/grand-prime/development/unofficial-cyanogenmod-13-0-galaxy-t3491494
LOS 14.1 : https://forum.xda-developers.com/grand-prime/development/unofficial-cyanogenmod-14-1-galaxy-t3536403

About 12.1-YOG4PAS8A4 Incremental update

guys i am ureka and my mobile is rooted and also i am using TWRP recovery. now latest update 12.1-YOG4PAS8A4 available for yureka so how can i update this? its OTA update available but my mobile is rooted and TWRP custom recovery installed so direct update will not work ... plz explain method...
U have to flash CWM recovery to update ROM over OTA then it will work
@ above ... we all know that .. what he wanted to ask is to provide him some download link so he can flash the update thru recovery
---------- Post added at 12:22 PM ---------- Previous post was at 11:48 AM ----------
VSPAIRTEL said:
guys i am ureka and my mobile is rooted and also i am using TWRP recovery. now latest update 12.1-YOG4PAS8A4 available for yureka so how can i update this? its OTA update available but my mobile is rooted and TWRP custom recovery installed so direct update will not work ... plz explain method...
Click to expand...
Click to collapse
U NEED TO DOWNLOAD THIS FILE n flash it manually from recovery ... m also doing this
http://builds.cyngn.com/incremental/tomato/cm-tomato-04864afef4-to-5242dd42b2-signed.zip
SunnyGrewal11 said:
@ above ... we all know that .. what he wanted to ask is to provide him some download link so he can flash the update thru recovery
---------- Post added at 12:22 PM ---------- Previous post was at 11:48 AM ----------
U NEED TO DOWNLOAD THIS FILE n flash it manually from recovery ... m also doing this
http://builds.cyngn.com/incremental/tomato/cm-tomato-04864afef4-to-5242dd42b2-signed.zip
Click to expand...
Click to collapse
No bro I am currently using 12.1-YOG4PAS3JM version i will flash this full zip http://builds.cyngn.com/incremental/tomato/cm-tomato-04864afef4-to-5242dd42b2-signed.zip
In TWRP wipe •cache • delvik cache •data
After Wiping Install Zip And Boot To System
VSPAIRTEL said:
guys i am ureka and my mobile is rooted and also i am using TWRP recovery. now latest update 12.1-YOG4PAS8A4 available for yureka so how can i update this? its OTA update available but my mobile is rooted and TWRP custom recovery installed so direct update will not work ... plz explain method...
Click to expand...
Click to collapse
VSPAIRTEL said:
No bro I am currently using 12.1-YOG4PAS3JM version i will flash this full zip http://builds.cyngn.com/incremental/tomato/cm-tomato-04864afef4-to-5242dd42b2-signed.zip
In TWRP wipe •cache • delvik cache •data
After Wiping Install Zip And Boot To System
Click to expand...
Click to collapse
that didnt worked for me ... try this one .. or if u can wait till tomorrow then i will try it on my brother's fone n let u know .. but m pretty much sure that this is going to work
https://www.androidfilehost.com/?fid=24533103863137355
Flash full firmware using fastboot
plz provide the steps
rahul_chauhan said:
plz provide the steps
Click to expand...
Click to collapse
If you want steps to flash via fastboot then follow below link:
http://forum.xda-developers.com/showpost.php?p=58476054&postcount=2

Root for Samsung Galaxy J500FN with Android 6.0.1

Like in the title, anyone have informations about it? Know where to download root for this version or when it will be announced?
just download TWRP recovery for 6.0.1 and flash latest supersu zip
where can i find latest supersu zip?
Is there anybody with this model that it rooted already?
If yes, could this member provide us with the rooting procedure?
R u trying to root stock 6.1 ?
More info please
Sent from my Galaxy J5 using XDA Labs
for me yes latest android 6.1.
All I did to root mind was install T.W.R.P and the latest su and it was done. Are you planning on staying on stock or using a custom ROM ?
I have just installed ZONIK's performance ROM on my J5FN and it's excellent
John
Sent from my Galaxy J5 using XDA Labs
Well, I want to root my jf500fn with stock rom after the last update from OTA to android 6.0.1 stock rom J500FNXXU1BPH1.
I am not sure how to do this as no compatible twrp and cf auto root found for this device. I am afraid not to brick the phone.
Any help much appreciated.
---------- Post added at 07:42 AM ---------- Previous post was at 07:34 AM ----------
Related to my previous post and more precisely i cannot find twrp and cf auto root fot this device compatible with the android 6.0.1 stock rom.
I am able to find only for android 5.1.1.
hellenic344 said:
Well, I want to root my jf500fn with stock rom after the last update from OTA to android 6.0.1 stock rom J500FNXXU1BPH1.
I am not sure how to do this as no compatible twrp and cf auto root found for this device. I am afraid not to brick the phone.
Any help much appreciated.
---------- Post added at 07:42 AM ---------- Previous post was at 07:34 AM ----------
Related to my previous post and more precisely i cannot find twrp and cf auto root fot this device compatible with the android 6.0.1 stock rom.
I am able to find only for android 5.1.1.
Click to expand...
Click to collapse
HOW TO ROOT 6.0.1
1) Install TWRP for 6.0.1 according to your model from here: http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
2) Go to recovery and install SuperSU zip file: http://forum.xda-developers.com/showthread.php?t=1538053 .
3) Reboot. Phone is rooted.
#Henkate said:
HOW TO ROOT 6.0.1
1) Install TWRP for 6.0.1 according to your model from here: http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
2) Go to recovery and install SuperSU zip file: http://forum.xda-developers.com/showthread.php?t=1538053 .
3) Reboot. Phone is rooted.
Click to expand...
Click to collapse
Thank you..i will try it
hellenic344 said:
Thank you..i will try it
Click to expand...
Click to collapse
I have the same galaxy J500fn and the same Version Build
Does it works with this steps?
PascalDee said:
I have the same galaxy J500fn and the same Version Build
Does it works with this steps?
Click to expand...
Click to collapse
yes it works.
my phone (j500fn) is perfect now...
elikanli said:
yes it works.
my phone (j500fn) is perfect now...
Click to expand...
Click to collapse
What is the SuperSU version to root J500fn?
Not working
#Henkate said:
HOW TO ROOT 6.0.1
1) Install TWRP for 6.0.1 according to your model from here: http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 .
2) Go to recovery and install SuperSU zip file: http://forum.xda-developers.com/showthread.php?t=1538053 .
3) Reboot. Phone is rooted.
Click to expand...
Click to collapse
I think I'm doing everything correctly but my phone is not rooted. I'm going to twrp after manually reboot in recovery mode by disconnecting the battery. I'm going to install, checking the last SuperSu zip, everything OK, reboot, but my phone still not rooted. Or is it only what the root checker is declaring. Root access is not properly installed.
iulisimo said:
I think I'm doing everything correctly but my phone is not rooted. I'm going to twrp after manually reboot in recovery mode by disconnecting the battery. I'm going to install, checking the last SuperSu zip, everything OK, reboot, but my phone still not rooted. Or is it only what the root checker is declaring. Root access is not properly installed.
Click to expand...
Click to collapse
Yeah, right, but that post is almost one year outdated. Try with the official TWRP from vince2678. Don't forget to activate OEM unlocking and debug from developers options in stock settings. Cheers.

Categories

Resources