Hey...
This is my specs of my phone. (Nexus 4)
Model : mako
Rom : Purityrom
Kernal : Hellscore b46
and i just bought ADATA usb OTG flash drive (UD320) and doesn't work.
I have tried this on my friends XPERIA Z1 and i does work, also on the Galaxy S4.
What can i do?
yot2703 said:
Hey...
This is my specs of my phone. (Nexus 4)
Model : mako
Rom : Purityrom
Kernal : Hellscore b46
and i just bought ADATA usb OTG flash drive (UD320) and doesn't work.
I have tried this on my friends XPERIA Z1 and i does work, also on the Galaxy S4.
What can i do?
Click to expand...
Click to collapse
What are you using to power the OTG? The N4 doesn't supply power for OTG no matter the kernel... you need to supply external power to the OTG device, something like this Host OTG Cable with Power connector or it won't work.
Q&A for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Paranoid Android 4.4
Hello!
first of all, thanks for your work. :good:
I would like to try the patch but I don't know which version to choose: I have a Paranoid Android 4.4
Could you help me?
Wifi Crash, Media Crash, Settings "Storage" Crash
Hey guys, I'm on PA 4.6 BETA5, when I flash the aosp or franko kernel (after going back to stock kernel before flashing the new one) my Wifi won't enable, android.something.media crashes and in the settings app, when I tap storage the app crashes...any way to solve this problem or an alternative? Thanks!
PS: I'm really sorry if this was asked before, I read the hole last 10 sites of the forum and didnt found anythings related to my problem, "just" 10 sites because I think its related to 4.4.4 and maybe PA.
Which OTG mod to download for stock 4.4.4?
Which OTG mod to download for stock 4.4.4? There are so many I can not figure out what is the correct one to use.
OTG Android Lollipop
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
piedra96 said:
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
I have looking and I think that it isn't incorporate in the stock kernel. So, anything to Android 5.0?
thanks
Click to expand...
Click to collapse
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Stock Lollipop
A zip file where i can make a modification to my stock kernel on the N4! I want to use the stock for a few days to test it!
pm_dsp_ra said:
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Click to expand...
Click to collapse
mm okey! so, have you test Hells Doctor on Lollipop? I will try out it this afternoon. I'm running a 4.3 stock perfectly with the otg, but Lollipop look like so excited.
Lollipop
Is there a patch for android lollipop for OTG support? I have franco.Kernel installed.
Lollipop
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
dangerelvis said:
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
Click to expand...
Click to collapse
I have no idea! I have tested Hells Doctor and Hell Core kernels on my Nexus 4 running Stock Lollipop and anyone work. :crying: :crying:
Anyone tried this patch on stock Lollipop kernel? Does it work?
How does one "Simply install the zip in recovery"?
My screen is broken (just the touch; everything is still visible). I was hoping I could install this mod without being able to touch the lower half of my screen so that I could plug in a mouse so that I could copy some files off my device.
I can reboot into recovery mode, but USB debugging is *not* enabled. I've never used "adb" on this device before (I just says "offline" when I try to run it from my PC).
I have no idea how to "install a zip".
Phone is an Nexus 4, running android 4.something.
OTG on Paranoid 4.6 beta 6
Hello,
When I flash the kernel (R199) and the system load I can't turn on the wifi and every time I enter the storege settings they crash.
also tried the other versions of the kernel, no help.
please help.
Thanks,
Is the OP willing to develop the patch for lollipop too? Or is there any nice kernel with USB host support?
nexus 4 lolipop 5.0.1 and xbox wireless gamepad
Hello. I want use xbox360 wireless gamepad on my nexus 4 lolipop 5.0.1. I think first I need kernel with OTG support. What kernel I can download on 5.0.1 android? I need y-cable for receiver of xbox360. what about mouses and keyboards they also need y-cable?
What can be the problem, why OTG still doesn't work
Hey guys,
however I'm completely new to this stuff, I managed to get through every barriers, and I put Cyanogenmod 11 snapshot M12 on my Nexus 4 and after that flashed the suggested kernel and patch successfully to try out OTG. The phone works withput problem, the installations seem to be successful, therefore I tried to connect an external storage to the phone to check if OTG works on it.
For that, I used a SIMPLE OTG cable like this:
<<<LINK CANNOT BE SHOWN SINCE I AM NEW TO THE FORUM - picture is the second picture of the first post in this thread>>>
connected to an Y-cable SIMILAR to this:
<<<NO LINK AGAIN - the 3rd picture of the first post in this thread>>>
The difference from the one on the picture is that mine has a male mini USB end instead of a female normal USB end as in the picture. My cable is the cable of an external wichester otherwise.
So, I tried with this cable setup, the result was that both the phone and the connected storage received electricity from the external power source, but the storage was not detected by the phone. I had a feeling that it doesn't get enogh power, so I attached it to a USB phone charger just to be sure, but the situation remained the same: the light on the storage was green, which means it is charging, the light on the phone was also on, but the storage was not detected.
My question is if I should try with the exact same cable set that can be found in the first post of this thread on the first picture or mine also should do the job, and there should be still some software related problem?
Please also tell me if you need more information on this to answer it, however I tried to be specific.
Thank you for your help in advance.
Hello. What i can do on lolipop? There is no solution? I have a 32gb flash drive, y-otg cable, standart power adapter micro-usb-male. Rooted nexus4
Which zip I need to download?
Hi, i'm really beggining on Android stuffs, since I didnt had one until the last week, so I'm really in doubt about which one of the zip files i need to install in my system to make the OTG cable work properly.
Once I downloaded a random ziddley zip on the internet and when I installed it in recovery mode, i needed to reinstall the android system on my phone, since the phone wont boot anymore.
So, can anyone help me? I'm sharing in this post a screenshot of the Android Version screen on the settings. I've rooted my phone using the King Root app
Considering that my android version is 4.4.4, I consider that I may download one of the following:
4.4.x: 2013.12.11 1604ET: [fk r199] [fk r199-CM]
4.4.x: 2013.12.06 1445ET: [aosp r7]
But which one?
And just another noob question. Is this the right way to install the ziddley zip on my phone?
(www).addictivetips.com/mobile/how-to-install-a-rom-or-app-from-zip-file-to-android-device-from-recovery/
Sorry for the noob questions and thanks to anyone who helps, because I REALLY need the otg cable to work, so I can develop some things using the XBOX 360 cable!
Removed
Hey,
I want to ask if it's possible to use USB OTG when the Tablet is rooted after using a Tool like "USB Host Check" which can activate OTG on several phones/tablets?
Otherwise I won't root it and bring it back tomorrow.
I saw a lot of comments on OTG but actually no one really wrote sth. about rooting it and using such a tool afterwards with the new android version update. I hope someone can give me more information on that.
Greetings,
Cédric
Brought it back and took a Galaxy Tab Pro 8.4, for only 240€, instead
Hello everyone,
Owning a Samsung Galaxy Grand Prime SM-G530FZ with android Version 5.0.2 , I wonder if it is possible to activate the OTG function (connect a USB interface to play a key) on this unit. Several technicians have told me that no, but one of them told me that this function is supported by its Galaxy Grand Prime and actually, he connected my OTG cable on his machine and could read the data on my USB key). He recommended me to reset my device.
My question is the following
Are there any Galaxy Grand Prime users who have successfully implemented OTG function on their Galaxy Grand Prime, and how they did it.
thank you for your reply
Best regards
Guepard66
galaxy grand prime not have otg support bro :/ sorry for the bad notice
---------- Post added at 02:24 AM ---------- Previous post was at 02:24 AM ----------
and we never support in the future
I have a g531h and it supports OTG, I just bought the adapter and all works fine, I guess it depends on which specific model you have, I'm sure all of the 531's have it also
Hey buddy I have SM-G530H and i tried to get OTG Support for few days and nothing helped me i think you should upgrade to SM-G530H
but i think developers should develope kerenl for otg because i think its kerenl probleme
SM-G530H is an older model than the SM-G531H.
The SM-G530 does not have the required hardware to support OTG.
It is not a software problem or a kernel issue, it just won't work.
u0aol said:
I have a g531h and it supports OTG, I just bought the adapter and all works fine, I guess it depends on which specific model you have, I'm sure all of the 531's have it also
Click to expand...
Click to collapse
usure?? g531h support otg??
You can try to compile your own kernel and enable the modules for the OTG Support.
Nayeem Hossain said:
usure?? g531h support otg??
Click to expand...
Click to collapse
100% positive, I bought an OTG adapter kit for about 8 dollars and use it to plug in my USB drives when I need to access files on them
I have the SM-G531H running latest firmware but it worked out of the box before any updating too
USB OTG Support on Grand Prime SM-G531F and SM G-531H
Well it works...
Nayeem Hossain said:
usure?? g531h support otg??
Click to expand...
Click to collapse
Try cm 14.1.... It supports in SM-530H..... IT IS JUST kernal PROBLEM .... Please develop a kernel for it....
Hit thanks if I am correct.....
Yes you Can
YES YOU CAN USE TH otg FUNCTION IN GALAXY GRAND PRIME BUT FOR THAT YOU HAVE TO INSTALL A CUSTOM ROM 6.0.1 THAt is listed in the development section. OTG function work properly in that but i also want you to know that in that rom battery consumption is high or fast . also after that i have problem with my camera . it says camera failed after 2 or 3 days which i m trying to figure out.
manij490 said:
YES YOU CAN USE TH otg FUNCTION IN GALAXY GRAND PRIME BUT FOR THAT YOU HAVE TO INSTALL A CUSTOM ROM 6.0.1 THAt is listed in the development section. OTG function work properly in that but i also want you to know that in that rom battery consumption is high or fast . also after that i have problem with my camera . it says camera failed after 2 or 3 days which i m trying to figure out.
Click to expand...
Click to collapse
I have otg in smg531f model
Owen007 said:
I have otg in smg531f model
Click to expand...
Click to collapse
i was talking about smg530h bro.
Can I convert my sm-g531f from lte to volte and also Wil it support otg? ??
Does SM-G530P support OTG?
Hello,
is there anywhere a kernel with usb 2 lan driver?
i am currently on touchwiz mm 6.0.1 with root and the h-vitamin kernel.
i thought i could compile a kernel with lan drivers but it seems to be very difficult
as far as i know galaxy tablets do have lan driver; would it be possible to extract the files and then put them into my note 4?
i have an anker gigabit usb 2 ethernet adapter
any new about this?
is there any android app able to install(*) drivers for the eth chipset ?
(*) with root