if you converted to OtterX see
[How-To] Revert from OtterX Project back to Stock Amazon Partitions by sd_shadow
Requirements
Twrp 2.2.2.1
FFF bootloader (1.4, 1.4a, or 1.5)
Watch: How To restore your Kindle fire to stock from a custom rom (be sure to use TWRP 2.2.2.1)
It's old, but still a good reference.
More Details here [HOW-TO] Root / Install a ROM / Unroot / Revert to Stock (A KFFB Supplement) by kinfauns
Downloads
zip-otter-twrp-2.2.2.1-blaze.sd.zip
MD5: 5b5c0ae11360d96e9e048b1a35cde133
fff-u-boot_v1.4a.zip
MD5: 419c53b922c963082454b14b7de75a90
update-kindle-6.3.4_D01E_4120220.bin: Amazon - XDA -
204 MB (214,584,846 bytes)
MD5; 238DF9B82FDBCA9153ED9A9830AFD729
Verify MD5's see https://sites.google.com/site/sdshadowscollection/home/hash-checksums
Install 2.2.2.1 and FFF in current twrp. reboot twrp
Change file extension for update-kindle-6.3.4_D01E_4120220.bin
to update-kindle-6.3.4_D01E_4120220.zip
Wipe partitions in 2.2.2.1 Twrp
See Screenshots
Wipe>Factory Reset, and Wipe>System
Reboot>recovery
Install update-kindle-6.3.4_D01E_4120220.zip
in Twrp 2.2.2.1
uncheck>zip file signature verification
See Screenshots
If you see any errors during install, do not reboot
try wiping partitions again, then try install again
if it fails again, try a different stock rom file.
I may go into more detail later.
Note: Installing full stock zip, will restore stock recovery and bootloader.
If you want to keep Twrp/FFF use
[2014][Pre-Rooted][Stock]System Version 6.3.3-Original Kindle Fire Only
Screenshots
Wipe>Factory Reset
Wipe>System
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
uncheck>zip file signature verification
pheonix1212 said:
I believe i have the stock kindle update showing under install now. Can i wipe the dalvik and cache and just install from that update?
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
As shown or described in this thread -> http://forum.xda-developers.com/showthread.php?t=1399072
Click to expand...
Click to collapse
pheonix1212 said:
The file is the stock amazon update file for 1st gen kindles.
TWRP Version: 2.8.3.0
WIndows 7 Home Premium 64-Bit if it matters.
For some reason I just can't get my kindle to show the update once i've changed it from .bin to .zip .
Sorry for the late response been pretty busy.
Click to expand...
Click to collapse
You can't install stock roms with TWRP 2.8.3.0, you need 2.2.2.1
sd_shadow said:
You can't install stock roms with TWRP 2.8.3.0, you need 2.2.2.1
Click to expand...
Click to collapse
Ok so is there anything im missing? i have the .img file and i put it on the root of the SD card right?
pheonix1212 said:
Ok so is there anything im missing? i have the .img file and i put it on the root of the SD card right?
Click to expand...
Click to collapse
.img files are for flashing with fastboot.exe in bootloader/fastboot mode
zips are used to install in twrp
if you are flashing an .img it needs to be on the pc in same folder as adb.exe and fastboot.exe
if you are installing a installable .zip it needs to be on the sd card should not matter where on the sd card.
sd_shadow said:
You can flash openrecovery-twrp-2.2.2.1-blaze.img
With Fastboot.exe
Code:
fastboot flash recovery openrecovery-twrp-2.2.2.1-blaze.img
Code:
fastboot reboot
Like in my video Flashing Twrp in FFF bootloader with fastboot.exe
Click to expand...
Click to collapse
I've flashed it and i'm now stuck on the screen that says press power button for boot menu.
Nevermind, its booted.
pheonix1212 said:
I've flashed it and i'm now stuck on the screen that says press power button for boot menu.
Nevermind, its booted.
Click to expand...
Click to collapse
.
power off
then connect to wall charger
sd_shadow said:
.img files are for flashing with fastboot.exe in bootloader/fastboot mode
zips are used to install in twrp
if you are flashing an .img it needs to be on the pc in same folder as adb.exe and fastboot.exe
if you are installing a installable .zip it needs to be on the sd card should not matter where on the sd card.
Click to expand...
Click to collapse
So now do i want to just go to install menu and install the update after changing the file to update.zip???
before installing stock rom besure to wipe cache, dalvik, data, and system
in wipe/advanced
sd_shadow said:
before installing stock rom besure to wipe cache, dalvik, data, and system
in wipe/advanced
Click to expand...
Click to collapse
Ok, the update is now showing up and im going to wipe. Hope this works.
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
sd_shadow said:
before installing stock rom besure to wipe cache, dalvik, data, and system
in wipe/advanced
Click to expand...
Click to collapse
There isn't anything under advanced to wipe. it's all under wipe
That's fine
Sent from my XT1028 using Tapatalk
Factory reset and wipe system
Sent from my XT1028 using Tapatalk
sd_shadow said:
before installing stock rom besure to wipe cache, dalvik, data, and system
in wipe/advanced
Click to expand...
Click to collapse
Under wipe there is Cache, Dalvik Cache, Factory Reset, and system. so should i wipe dalvik, cache, and system and then install?
---------- Post added at 11:42 PM ---------- Previous post was at 11:36 PM ----------
sd_shadow said:
Factory reset and wipe system
Sent from my XT1028 using Tapatalk
Click to expand...
Click to collapse
When i go to reboot the system it says No OS is installed. and theres an error installing the update.
---------- Post added at 11:45 PM ---------- Previous post was at 11:42 PM ----------
sd_shadow said:
Factory reset and wipe system
Sent from my XT1028 using Tapatalk
Click to expand...
Click to collapse
that normal?
---------- Post added at 11:53 PM ---------- Previous post was at 11:45 PM ----------
sd_shadow said:
Factory reset and wipe system
Sent from my XT1028 using Tapatalk
Click to expand...
Click to collapse
I still have a custom bootloader on my kindle. and the kindle fire logo is frozen.
pheonix1212 said:
Under wipe there is Cache, Dalvik Cache, Factory Reset, and system. so should i wipe dalvik, cache, and system and then install?
---------- Post added at 11:42 PM ---------- Previous post was at 11:36 PM ----------
When i go to reboot the system it says No OS is installed. and theres an error installing the update.
---------- Post added at 11:45 PM ---------- Previous post was at 11:42 PM ----------
that normal?
---------- Post added at 11:53 PM ---------- Previous post was at 11:45 PM ----------
I still have a custom bootloader on my kindle. and the kindle fire logo is frozen.
Click to expand...
Click to collapse
Did you verify md5 after downloading stock rom?
Sent from my XT1028 using Tapatalk
sd_shadow said:
Did you verify md5 after downloading stock rom?
Sent from my XT1028 using Tapatalk
Click to expand...
Click to collapse
No, i guess i need to do so. Can you send me the info and MD5 cecker?
pheonix1212 said:
No, i guess i need to do so. Can you send me the info and MD5 cecker?
Click to expand...
Click to collapse
204 MB (214,584,846 bytes)
MD5; 238DF9B82FDBCA9153ED9A9830AFD729
https://sites.google.com/site/sdshadowscollection/home/hash-checksums
sd_shadow said:
204 MB (214,584,846 bytes)
MD5; 238DF9B82FDBCA9153ED9A9830AFD729
https://sites.google.com/site/sdshadowscollection/home/hash-checksums
Click to expand...
Click to collapse
They're verified as correct.
pheonix1212 said:
They're verified as correct.
Click to expand...
Click to collapse
see if my preroot installs
sd_shadow said:
see if my preroot installs
Click to expand...
Click to collapse
will do.
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
sd_shadow said:
see if my preroot installs
Click to expand...
Click to collapse
can you post a link? i can't seem to locate the file.
pheonix1212 said:
will do.
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
can you post a link? i can't seem to locate the file.
Click to expand...
Click to collapse
update-kindle-prerooted.6.3.4.v1.zip
MD5: 529db42446f39455f005d2aaf5cd4853
Related
I am using 2.3.5 GT-I9100_XEN_I9100XWKJ3_I9100XENKJ1_I9100XXKI4
i am trying to install MIUI 1.11.18 mobile cannt install it. and restarts after copying files... nothing happen pls any one have point to point guide or video link.... thanks ....
Download the official rom, start your phone in recovery mode by pressing power home and volume up your phone must be rooted for this, then in recovery mode clear user data, cache and dev cache, then select install zip from sd go to your rom and install it restart the phone and you are ready to go
Sent from my GT-I9100 using Tapatalk
already done that... but can u please share links as well.... thanks in advance...
asif.malick said:
already done that... but can u please share links as well.... thanks in advance...
Click to expand...
Click to collapse
You must also format system in mounts and storage to make it work,
So wipe data, clear cache and dalvik cache, format system and flash the miui rom TWICE IN A ROW (really, not kidding). Let it boot and than reboot again
---------- Post added at 07:20 PM ---------- Previous post was at 07:15 PM ----------
Tell us what you have done and its easier for us to point out what is missing. There are dozen ways thing can go wrong
pcboyy said:
Tell us what you have done and its easier for us to point out what is missing. There are dozen ways thing can go wrong
Click to expand...
Click to collapse
sir i have followed the following steps.
1. install 2.3.5 from this website
http://www.cellphone-tutorial.com/2011/11/i9100xwkj3-android-235-gingbread.html
2. root it from
http://forum.xda-developers.com/showthread.php?t=1103399
but a yellow button is shown after rooting...
then after that by going into recovery mode, install update from sdcard...
followed the same way by which update galaxy s i9000...
then tried to install all these three versions
MiUI Android SGS2 1.11.11 RTL-sign.zip
miuiandroid_SGS2-1.11.18.zip
miuiscotland_I9100-1.11.18.zip
it just always resets.. nothing else happens...
asif.malick said:
sir i have followed the following steps.
1. install 2.3.5 from this website
http://www.cellphone-tutorial.com/2011/11/i9100xwkj3-android-235-gingbread.html
2. root it from
http://forum.xda-developers.com/showthread.php?t=1103399
but a yellow button is shown after rooting...
then after that by going into recovery mode, install update from sdcard...
followed the same way by which update galaxy s i9000...
then tried to install all these three versions
MiUI Android SGS2 1.11.11 RTL-sign.zip
miuiandroid_SGS2-1.11.18.zip
miuiscotland_I9100-1.11.18.zip
it just always resets.. nothing else happens...
Click to expand...
Click to collapse
You should wipe cache, dalvik cache, wipe data/factory format, and in mount and storage format system. Then flash Miui twice in a row, reboot, boot up and reboot again. That should do it. Miui has different system than Samsung
gee2012 said:
You should wipe cache, dalvik cache, wipe data/factory format, and in mount and storage format system. Then flash Miui twice in a row, reboot, boot up and reboot again. That should do it. Miui has different system than Samsung
Click to expand...
Click to collapse
before installing miui???
Yes, do the above steps and miui will get installed. Flash miui twice in a row without rebooting!
gee2012 said:
Yes, do the above steps and miui will get installed. Flash miui twice in a row without rebooting!
Click to expand...
Click to collapse
same happened... it just restarts.....
asif.malick said:
same happened... it just restarts.....
Click to expand...
Click to collapse
do you have usb debugging enabled in applications?
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
gee2012 said:
do you have usb debugging enabled in applications?
Click to expand...
Click to collapse
Restarts , you mean bootloop or startscreen with the S on it?
gee2012 said:
do you have usb debugging enabled in applications?
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
Restarts , you mean bootloop or startscreen with the S on it?
Click to expand...
Click to collapse
no usb debugging is not enabled and
yes. it goes into unlimited time bootloop....
asif.malick said:
no usb debugging is not enabled and
yes. it goes into unlimited time bootloop....
Click to expand...
Click to collapse
Oke, go back in recovery mode and wipe data/factory reset, wipe cache and dalvik cache and reboot
gee2012 said:
Oke, go back in recovery mode and wipe data/factory reset, wipe cache and dalvik cache and reboot
Click to expand...
Click to collapse
it dont went into recovery mode.. just simply remains in bootloop...
asif.malick said:
it dont went into recovery mode.. just simply remains in bootloop...
Click to expand...
Click to collapse
pull out the battery, wait 15 seconds, reinsert it. Go in recovery mode (volume up + Power + menu button). Wipe data factory reset, cache and dalvik cache and reboot
gee2012 said:
pull out the battery, wait 15 seconds, reinsert it. Go in recovery mode (volume up + Power + menu button). Wipe data factory reset, cache and dalvik cache and reboot
Click to expand...
Click to collapse
same s... happened.. GOD knows what is happening ... now my custom binary download is showing 13 COUNTS....
asif.malick said:
same s... happened.. GOD knows what is happening ... now my custom binary download is showing 13 COUNTS....
Click to expand...
Click to collapse
Do you have a working backup in recovery? Try to restore that, if not it`s best to flash back to stock rom for now. You can always root it and try again. For the binary count you should buy a jig to reset the counter.
Try to read about rooting and always enable usb-debugging when flashing custom roms/kernels
Look in Intratech`s thread for your stock rom, he almost has them all
Good luck
gee2012 said:
Do you have a working backup in recovery? Try to restore that, if not it`s best to flash back to stock rom for now. You can always root it and try again. For the binary count you should buy a jig to reset the counter.
Try to read about rooting and always enable usb-debugging when flashing custom roms/kernels
Look in Intratech`s thread for your stock rom, he almost has them all
Good luck
Click to expand...
Click to collapse
thanks for your time gee2012... and one thing more.. can u pls share a tutorial for sgs 2 or u can make 1 it for new users like me .. bundle of things...
if some else have solution pls share.
I tried MIUI and it stuck on boot screen, i read somewhere certain Roms need flashing twice so flash it then instead of rebooting flash it again then reboot
Sent from my GT-I9100 using XDA App
I'm currently stuck in Clockworkmod Recovery. Whenever I tried to restart my phone.....it goes back to Clockworkmod Recovery. What do I do?
3gDroid said:
I'm currently stuck in Clockworkmod Recovery. Whenever I tried to restart my phone.....it goes back to Clockworkmod Recovery. What do I do?
Click to expand...
Click to collapse
is it CWM or TWRP?
It's CWM
3gDroid said:
It's CWM
Click to expand...
Click to collapse
I had that problem in TWRP
http://forum.xda-developers.com/showthread.php?t=2451696&page=18
this is the page where i foudn the fix
http://forum.xda-developers.com/showpost.php?p=49284274&postcount=174
that is the post i followed, if no one answer you and this is your last resort, u might as well try it. P.S not alot use CWM anymore, if yyou get this fix might wanna try and flash to TWRP
Thanks dude!
How do I enter commands in CWM??
3gDroid said:
How do I enter commands in CWM??
Click to expand...
Click to collapse
what you might wanna do is do adb from your computer hook up to there, thats how i did it with TWRP.
---------- Post added at 10:19 AM ---------- Previous post was at 10:10 AM ----------
or you could try to flash TWRP see if it will work then go from the step i pointed out.
Hi Guys i just received a OTA update from my LG g2 d802 32gb version after i download and restart to install it seems im stuck at CWM recovery and cant boot ROM after i reboot hard restart any solutions?
loong4455 said:
Hi Guys i just received a OTA update from my LG g2 d802 32gb version after i download and restart to install it seems im stuck at CWM recovery and cant boot ROM after i reboot hard restart any solutions?
Click to expand...
Click to collapse
You cant update if you have a custom recovery. If your still stuck hold the power+volume button until you see the lg logo then let go and press and hold again for factory reset. That will boot you back into CWM
Art Vanderlay said:
You cant update if you have a custom recovery. If your still stuck hold the power+volume button until you see the lg logo then let go and press and hold again for factory reset. That will boot you back into CWM
Click to expand...
Click to collapse
ive already done that but still after reboot automatically boot into recovery
Are you rooted and have you made a backup?
Art Vanderlay said:
Are you rooted and have you made a backup?
Click to expand...
Click to collapse
im rooted and i didnt make any backup now i cant enter download mode because it will enter to cwm recovery no matter wat
Try doing a full wipe in cwm and then trying download mode. If it still does'nt work then this might help you http://forum.xda-developers.com/showthread.php?t=2582142 Its a bit complex though but its a last resort.
Art Vanderlay said:
Try doing a full wipe in cwm and then trying download mode. If it still does'nt work then this might help you http://forum.xda-developers.com/showthread.php?t=2582142 Its a bit complex though but its a last resort.
Click to expand...
Click to collapse
full wipe means i format everything in the mounts and storage? BTW can i push the flashable zip file to the device and flash it through CWM?
Yes try flashing a zip if you have one.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
If not just wipe cache dalvik and try download mode
Art Vanderlay said:
Yes try flashing a zip if you have one.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
If not just wipe cache dalvik and try download mode
Click to expand...
Click to collapse
still cannot after wipe dalvik cache ill download flex rom and push it to flash
I installed a cm13 on my lenovo a6000 phone using the TWRP recovery. It was too slow and buggy. Then I googled and found some good and stable roms for my phone.
Downloaded the Mokee rom and Gapps
boot into twrp recovery
wiped cache data system internal storage and tried to flash it
the twrp recovery turn off again boot into itself and failed to flash it
Also it showed unable to mount data
In xda i someone told that it was a corrupt partition and he gave me a command something like mk2fse -T /dev/block/****
i executed that command from the terminal in twrp recovery
Then when i rebooted the phone it showed nothing
No bootloader
No Recovery
No download mode
and not even the lenovo logo. Blank screen
i connected the device into a pc then on the pc it showed 10 disks from local disk J to S
Help me please
difuse said:
I installed a cm13 on my lenovo a6000 phone using the TWRP recovery. It was too slow and buggy. Then I googled and found some good and stable roms for my phone.
Downloaded the Mokee rom and Gapps
boot into twrp recovery
wiped cache data system internal storage and tried to flash it
the twrp recovery turn off again boot into itself and failed to flash it
Also it showed unable to mount data
In xda i someone told that it was a corrupt partition and he gave me a command something like mk2fse -T /dev/block/****
i executed that command from the terminal in twrp recovery
Then when i rebooted the phone it showed nothing
No bootloader
No Recovery
No download mode
and not even the lenovo logo. Blank screen
i connected the device into a pc then on the pc it showed 10 disks from local disk J to S
Help me please
Click to expand...
Click to collapse
Try using QFIL downloader. Some other guy also had the same problem with 10 disks. He got it solved through QFIL only.
Yes it was me who faced the problem..
---------- Post added at 04:21 AM ---------- Previous post was at 04:20 AM ----------
Basically I had done the same thing that u have done flashed a ROM did not like it tries to change another got corrupt e not able to Mount error tried to reboot bang it did not turn on....on PC its shoed many partitions.
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
If u want to know the solution say yes or no
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
Or PM me
The Hard Gamer said:
Yes it was me who faced the problem..
---------- Post added at 04:21 AM ---------- Previous post was at 04:20 AM ----------
Basically I had done the same thing that u have done flashed a ROM did not like it tries to change another got corrupt e not able to Mount error tried to reboot bang it did not turn on....on PC its shoed many partitions.
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
If u want to know the solution say yes or no
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
Or PM me
Click to expand...
Click to collapse
Dude, just tell him already. Before he commits suicide.
sasukay said:
Dude, just tell him already. Before he commits suicide.
Click to expand...
Click to collapse
Hey but if he is not gonna see it the why should I waste my time
i need it help me
The Hard Gamer said:
Yes it was me who faced the problem..
---------- Post added at 04:21 AM ---------- Previous post was at 04:20 AM ----------
Basically I had done the same thing that u have done flashed a ROM did not like it tries to change another got corrupt e not able to Mount error tried to reboot bang it did not turn on....on PC its shoed many partitions.
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
If u want to know the solution say yes or no
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
Or PM me
Click to expand...
Click to collapse
i need it help me
yes, same problem here, after flashing everything worked fine. when i woke up morning, i can't turn on, recovery or fastboot, any solution
vssprasad said:
yes, same problem here, after flashing everything worked fine. when i woke up morning, i can't turn on, recovery or fastboot, any solution
Click to expand...
Click to collapse
follow this https://www.youtube.com/watch?v=Aejq4DW4XOA
u5man4 said:
follow this https://www.youtube.com/watch?v=Aejq4DW4XOA
Click to expand...
Click to collapse
thanks for help, My phone even Not turned on, then i taken to service center, he said that system board was sorted. :crying:
that's the crazy thing i can't understand. i worked with it whole night, and put in charge and slept. morning mobile board was Sorted
difuse said:
I installed a cm13 on my lenovo a6000 phone using the TWRP recovery. It was too slow and buggy. Then I googled and found some good and stable roms for my phone.
Downloaded the Mokee rom and Gapps
boot into twrp recovery
wiped cache data system internal storage and tried to flash it
the twrp recovery turn off again boot into itself and failed to flash it
Also it showed unable to mount data
In xda i someone told that it was a corrupt partition and he gave me a command something like mk2fse -T /dev/block/****
i executed that command from the terminal in twrp recovery
Then when i rebooted the phone it showed nothing
No bootloader
No Recovery
No download mode
and not even the lenovo logo. Blank screen
i connected the device into a pc then on the pc it showed 10 disks from local disk J to S
Help me please
Click to expand...
Click to collapse
It can be due to error in your updater script....so it is bricked in my opinion. The best thing to do right now is to take it to the service center and tell them it was switched off at night and today it is not working...some story you make... Then if in warranty you will get it repaired and if they ask you about any root and stuff tell them I didn't did anything.. I think you chances are low as you have a custom recovery on and you can't flash a stock recovery as you cannot go to bootloader menu. If it helped a thanks would be appreciated
So I just bought a used g6 us997 and have unlocked the bootloader following the guide by autoprime and have flashed twrp 3.1.1 and when I first booted into twrp I swiped to allow modifications. Then I flashed magisk V14. So my question is did I do something wrong because of the messages that are in red in the pics?
Go to mount and mount system lol
basicreece said:
Go to mount and mount system lol
Click to expand...
Click to collapse
I tried that and it won't let me. It vibrates when I try and check system but it won't highlight.
Sent from my Pixel XL using XDA Labs
Welp.
I've been having the same problem. I was literally about to post the exact same thing. I've rooted my phone before but now I can't after I've been messing around and failing to install Fulmics rom on my phone countless times.
---------- Post added at 03:57 AM ---------- Previous post was at 03:47 AM ----------
After messing around with the mounting and making the system read only, I somehow managed to install SuperSU, even though I was getting the same error, and I tested it by installing a custom boot animation.
You using the latest TWRP?
3.2.0?
I had the same issue this morning.
to fix:
- Select Wipe
- Select Advance wipe
- Tick system only
- Select Repair or change file system
- Select repair file system
- Reboot
- Try again