<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IDDUBNI1_I9300IODDBNI1_I9300IXXUBNH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to install last update from SamMobile but this thing keep going i tried 4 different firmwares plz help.
Dude, this update is for i9300i, not for i9301i. Your smartphone is not compatible with the updates that you tried to flash.
Please someone correct me if im wrong.
INeedHack said:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IDDUBNI1_I9300IODDBNI1_I9300IXXUBNH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to install last update from SamMobile but this thing keep going i tried 4 different firmwares plz help.
Click to expand...
Click to collapse
And what is your model? GT-I9300I or GT-I9301I?
This update is for s3 neo duos GT-I9300I. If you have right mobile. Then may be you have other problems.
Arsal7R said:
And what is your model? GT-I9300I or GT-I9301I?
This update is for s3 neo duos GT-I9300I. If you have right mobile. Then may be you have other problems.
Click to expand...
Click to collapse
i got this from sammobile my phone is s3 neo gt-i9301l not duos , wher can i get a update for this
Arsal7R said:
And what is your model? GT-I9300I or GT-I9301I?
This update is for s3 neo duos GT-I9300I. If you have right mobile. Then may be you have other problems.
Click to expand...
Click to collapse
thnx i founded the solution i think ,
but this s3 neo gt-i9301l when will get a 4.4.4 i´m downloading the firmware because i dislike roms , i will not brick my phone if i install the same version ? and again thnx alot
INeedHack said:
thnx i founded the solution i think ,
but this s3 neo gt-i9301l when will get a 4.4.4 i´m downloading the firmware because i dislike roms , i will not brick my phone if i install the same version ? and again thnx alot
Click to expand...
Click to collapse
No your mobile will not brick by flashing firmware. But it can be if you are careless during the process like you did not connect usb cable properly. GT-I9301I hasn't got any 4.4.4 update. All updates are 4.4.2 and i think 4.4.2 is better than 4.4.4.
INeedHack said:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IDDUBNI1_I9300IODDBNI1_I9300IXXUBNH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to install last update from SamMobile but this thing keep going i tried 4 different firmwares plz help.
Click to expand...
Click to collapse
Are you trying to downgrade your firmware? Because it gave the same error when my friend tried to.
xddxd said:
Are you trying to downgrade your firmware? Because it gave the same error when my friend tried to.
Click to expand...
Click to collapse
i fixed it thnx i had the wrong firmware
Arsal7R said:
No your mobile will not brick by flashing firmware. But it can be if you are careless during the process like you did not connect usb cable properly. GT-I9301I hasn't got any 4.4.4 update. All updates are 4.4.2 and i think 4.4.2 is better than 4.4.4.
Click to expand...
Click to collapse
i wanted to insatll ios emoji on my s3 , but emoji switcher didn´t work just 5 of ios emoji-s worked so i thinked to update my phone maybe emoji switcher workes then anyway tthnx
Related
hello - I have S4 9505 and I try to Upgrade Firmware from BTU-I9505XXUDMH8 to new Firmware TGY-I9505ZHUDMH6 and I get an error in odin 3.7 FAIL
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505ZHUDMH6_I9505ZZHDMH6_I9505ZHUDMH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
after flashing the I9505XXUDMH8 due to new Samsung Shenanigans u can only go UP with upgrade... so u can't install mh7-6-5-4-3- ecc.
U can install only above I9505XXUDMH8 :/
Same problem here
any Solutions ?
just wait for new buildnumber or experimenral downgrade
Sent from my GT-I9505 using Tapatalk 2
There is a new firmware I9505ZHUDMI1 which is released after the MH8 so its a higher version, but this firmware update also fails via ODIN
samsung has absolutely screwed up the S4, lousy knoxx stuff which is a pain to remove manually
any ideas anyone on how we can go back to an old firmware or how do we even udpate so called new firmware
Hi all,
I was running an official ROM (MI8) and I tried to root it, of course it went wrong
Now I'm getting the "Firmware Upgrade encountered an issue" error message while booting. I have tried to facyory reset with kies and it does work (after downloading the firmware it says it doesnt recognize the phone)
I have access Download Mode, I have tried to push offical fw's with oding , no luck I get :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
does anyone have an idea ?
PS : sorry for the topic title, Cant edit anymore, will have to wait for a couple of minutes
Different usb port, different pc, different usb cable, reinstall drivers, make sure Kies is not running in the background.
Thanks it worked
Sorry for another stupid thread like this I was under panic lol
Sent from my GT-I9505 using xda app-developers app
Hello i was running CM 11 on my gt-i9500 then i installed the alpha i think it was chinese of lolipop 5.0 stock version
yesterday sammobile released official version russian of 5.0 so i downloaded it , and i think something went wrong because this message show when i turn on my phone Firmware upgrade encountered an issue please select recovery mode in kies and try again
i tried every thing flashing old stock new stock using recover and all things every time i try to install it using odin tried most version of odin
it give me fail in system this msg show
and i tried removed kies and installation tried while its on and while its off !!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Please HELP FAST!!
I have a galaxy S6 Edge which you could probably tell from the model number and I recently rooted it. After realizing that my phone was very very sluggish after the root, I decided to unroot it. I have the proper stock firmware for my device downloaded on my computer (Lollipop 5.1.1) but when I tried to flash it manually through Odin I received this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was surprised to find that this flash wasn't successful because I've flashed this firmware on the phone multiple times with ease. After looking around on google for quite some time, I haven't yet found a solution witch is the reason why I am writing this post. I am not sure how to fix this error and would really appreciate some help. Thanks
This is the file I downloaded from SamMobile's website:
sammobile.com/firmwares/database/SM-G925P/
This is a screenshot of the Odin after running the flash:
prntscr.com/8mpeso
Emadness said:
I have a galaxy S6 Edge which you could probably tell from the model number and I recently rooted it. After realizing that my phone was very very sluggish after the root, I decided to unroot it. I have the proper stock firmware for my device downloaded on my computer (Lollipop 5.1.1) but when I tried to flash it manually through Odin I received this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was surprised to find that this flash wasn't successful because I've flashed this firmware on the phone multiple times with ease. After looking around on google for quite some time, I haven't yet found a solution witch is the reason why I am writing this post. I am not sure how to fix this error and would really appreciate some help. Thanks
This is the file I downloaded from SamMobile's website:
sammobile.com/firmwares/database/SM-G925P/
This is a screenshot of the Odin after running the flash:
prntscr.com/8mpeso
Click to expand...
Click to collapse
For a start it may help posting in the correct forum lol. This is the edge+ forum for G928 models.
Sent from my SM-G928F using Tapatalk
tatoo069sv said:
For a start it may help posting in the correct forum lol. This is the edge+ forum for G928 models.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Hahaha my bad. I'm a newbie to xda forums >.<
Emadness said:
Hahaha my bad. I'm a newbie to xda forums >.<
Click to expand...
Click to collapse
Hey no worries mate. I just didn't want you waiting for an answer and not getting it because the readers don't use your model [emoji6]
Sent from my SM-G928F using Tapatalk
Make sure that you are in fact using the same carrier and model firmware as your phone.
Also maybe @Misterjunky can help
I was rooting the new 5.0.2 update and as i was doing it there a error i think the code was 1 but i am not 100% sure. as soon as i started the odin process and then it froze and i cant get the tablet to go out of Odin mode and i tried flashing the orignal rom and it didnt work.
the processes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T530NUOVU1BOJ2_T530NUBNN1BOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have no idea why this is happening and i need to get out of odin very fast (because need the info on it)
can someone help please
Hi,
Thanks for using XDA assist.
Your thread will be moved to the Galaxy Tab 4 Q&A, Help & Troubleshooting forum for specialized help. There are experts there who can help you out.
Good Luck! - gsstudios
Your firmware might be corrupted, try redownloading the 4.4.2 version then update it to 5.0.2. I also guess twrp method does not work on 5.x.x firmwares on tab 4