Hi,
my network is not working after I flash Kangakat. I have to search multiple times network manually. IF I happen to be connected, as soon as I start a call, I get disconnected.
I run an i337M and I did flash the fix after flashing the rom. Temporary flashed Gummyrom.
Any ideas?
PS: I have been flashing rom for 3-4 years. I followed the steps to flash. No dirty flash.
Bump!
Now I am connected on the network. Issue I have is when I make a call, the phone shows that I lost the signal but I'm still on the call. And after the call ends, it takes couple of minutes to be on the data network. Any idea
Issue resolved
Download and flashed last modem for i337 through ODIN.
Modem can be found here http://forum.xda-developers.com/showthread.php?t=2542043
Big thanks to Danvdh!
Hi,
When I was receiving a phone call only the vibration was working, no sounds, I couldn't slide the screen to answer properly, which means that I was able to slide, but the round icon of the slide could not catch the phone green icon. I could play no sound at all on videos, spotify, alarm, etc.
Currently settings about my phone:
Samsung S4 i9505 - 4.4.2
Baseband: i9505XXUFNBH
Bootloader: I9505XXUBMG4
Any fixes? People saying different things and really want a well explained correct answer. I've had previous problems and really just want to get this sorted
hamzzzzz said:
Hi,
When I was receiving a phone call only the vibration was working, no sounds, I couldn't slide the screen to answer properly, which means that I was able to slide, but the round icon of the slide could not catch the phone green icon. I could play no sound at all on videos, spotify, alarm, etc.
Currently settings about my phone:
Samsung S4 i9505 - 4.4.2
Baseband: i9505XXUFNBH
Bootloader: I9505XXUBMG4
Any fixes? People saying different things and really want a well explained correct answer. I've had previous problems and really just want to get this sorted
Click to expand...
Click to collapse
Try to download this file and flash it via odin by selecting phone
Repulsa said:
Try to download this file and flash it via odin by selecting phone
Click to expand...
Click to collapse
Thanks. This sorted the issue. Thanks given.
The Thread can be closed
hamzzzzz said:
Thanks. This sorted the issue. Thanks given.
The Thread can be closed
Click to expand...
Click to collapse
No worries Next time,If your flashing the latest modem flash only GSM modem . Not wifi fix/LTE or package combined, so you wont get any problem with your sound. Have a nice day .
...
absolutely no sounds & call function after flashing
Hello,
A few days ago I flashed my Galaxy S4 with the last cyanogenonmod using their flashing software. Then my phone was unlocked but I couldn't access the data internet from my new provider's sim card (3G).
Then I tried to reflash the original version to unlock the phone from the correct provider (Meteor Ireland).
Problem is that I am using Mac OS and have no access to a windows. So I used Heimdall 1.4.0.
From the begining, and I tried with many different ROMs, but I can never install the aboot partition. everything else flashes correctly. But now my phone network is working perfectly, except that I have absolutely no sound any more. The call application crashes, no alarm, no sound during boot, no videos that can be played and when I'm using the music app it says the format of the songs is not recognized.
I think the problem comes from the ABOOT partition missing, as I tried the other NON-HLOS as you said earlier. Sadly this GSM only version didn't fix the sound / calls and just deactivated my wifi.
I am a bit lost here, I was thinking about reinstalling a cyanogenonmod via heimdall to check if the aboot works there, because when I reinstalled cyanogenonmod via the software the issues weren't fixed.
Here is the detail of my phone, if someone can help me get through that I would really appreciate it :
SAMSUNG Galaxy S4 - GT-I9505
Region : Ireland
Provider : Meteor
Baseband version : I9505XXUENAA
Build number : JSS15J.I9505XXUENAA
Thank you very much
Hi all,
I've had my phone locked on Tele2 (CRO) network which I needed to unlock to be able to use T-mobile SIM. I've used Odin 3.04 and followed the instructions to update modem to I9505XXUFNB9. I've managed to unlock the network this way and use my new SIM but the connection (both phone and mobile data) kept switching on and off constantly.
After that I've tried another firmware, namely I9505XXUFNDG for T-mobile but the problem now is that mobile is almost always off with no possiblity to connect and WiFi is blocked completely (security notification "Your device's security has blocked an action").
Basebands registered properly after every flash.
Phone is not rooted and me not being a power user would just love it to work as it was intended to
Followed the guide, all firmwares downloaded from here
Appreciate any help.
Might be onto something. After reading through this post seems I need to apply WiFi fix but I cannot tell which one to use for my phone (I9505XXUFNDG) as it's not posted. Kernel version 3.4.0-481100.
I've tried I9505_WiFi_FIX_MDM.tar and I9505_WiFi_FIX_MDF.tar but they just messed up the phone completely.
Thx a lot.
impaelas said:
Might be onto something. After reading through this post seems I need to apply WiFi fix but I cannot tell which one to use for my phone (I9505XXUFNDG) as it's not posted. Kernel version 3.4.0-481100.
I've tried I9505_WiFi_FIX_MDM.tar and I9505_WiFi_FIX_MDF.tar but they just messed up the phone completely.
Thx a lot.
Click to expand...
Click to collapse
Hi ,
you should flash the fix for the modem you have installed , try following:
Flash another modem from the list there
Now flash the modem wifi fix for that modem
If still in trouble re flash stock and start all over again.....
MAX 404 said:
Hi ,
you should flash the fix for the modem you have installed , try following:
Flash another modem from the list there
Now flash the modem wifi fix for that modem
If still in trouble re flash stock and start all over again.....
Click to expand...
Click to collapse
Thx, did just that and now it works properly.
Much obliged.
a problem started to show recently; when i select LTE/WCDMA/GSM for auto connect network mode when the mode switches due to signal availability it doesn't get reconnected. i.e. while under LTE it works fine but if i move and get out of reach it should automatically switch to slower network which it doesn't. this works fine if i select WCDMA/GSM then the switches are fine but LTE is not available under this.
one more thing i noticed since i'+ve flashed the phone is that the upper part of the phone gets very very hot (a lot more than before). since the flash i've also had to replace a microSD card which died within weeks (not necessarily connected but worth noting).
any suggestions welcome.
Android: 4.4.2
Baseband: I9505XXUFNB9
Kernel: 3.4.0-481100
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint) - Note that I am on CREDO (uses Sprint network)
EDIT - FIXED YAY!!! FULL LTE WORKING GREAT!
Reflashing the NKD modem for 5.0 +, with advice here:
http://forum.xda-developers.com/showpost.php?p=58338773&postcount=12
Changing APN/Mobile settings to recommended here:
http://forum.cyanogenmod.org/topic/84151-credo-mobile-4g/#entry430448
Iriez said:
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint)
Click to expand...
Click to collapse
Since last time / last week have you flashed any new modems?
lingowistico said:
Since last time / last week have you flashed any new modems?
Click to expand...
Click to collapse
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Iriez said:
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Click to expand...
Click to collapse
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
lingowistico said:
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
Click to expand...
Click to collapse
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Iriez said:
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Click to expand...
Click to collapse
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
lingowistico said:
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
Click to expand...
Click to collapse
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Iriez said:
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Click to expand...
Click to collapse
Try downloading the tar here and flash it in Odin.
lingowistico said:
Try downloading the tar here and flash it in Odin.
Click to expand...
Click to collapse
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Iriez said:
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Click to expand...
Click to collapse
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Iriez said:
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Click to expand...
Click to collapse
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
lingowistico said:
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
Click to expand...
Click to collapse
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Iriez said:
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Click to expand...
Click to collapse
Congrats! I'm glad it worked out Ktoonsez mentioned in the CM12 thread that his kernel was optimized for sprint/verizon phones in some way, don't remember what though :silly:
Hi everyone I've been lurking around the forums the past week trying to find a fix to my problem and I just find anything that will fix it. I'm hoping one of you that has a bit more experience with this can help me.
OK so here's my problem
My Samsung galaxy s4 i337m was rooted but I wanted to unroot to update cause I'm new to it and never used my root for anything
I looked around and downloaded a stock ROM and flashed it in with oden and I had no WiFi no sound couldn't make calls no videos so I tried flashing another custom ROM and it let's me use data and text but no calls no video no sound I usually only get 2-3 hours of down time here to look for a fix and I have been all this week but can't seem to work the problem out
Does anyone know how to fix this so I can call my kids again I'm not gonna be homeor anywhere close to a place to get a new phone for another month
And to sweeten the deal I'll send 25$ PayPal to the person that can get this fixed for me
Thanks for your time
I'm living in Canada and my provider is telus
stephen1617 said:
I'm living in Canada and my provider is telus
Click to expand...
Click to collapse
1. Download the latest firmware for your device: HERE.
2. Flash it via ODIN. Reboot your device and take a look if you have wifi or sound. Reflash the same firmware that you downloaded in the step 1 if not. Remember that dialing *#1234# have to appear this for fix the calling/wifi:
AP: I337MVLUFNI2
CP: I337MVLUFNI2
CSC: I337MOYAFNI2
3. Good luck :highfive:
Joku1981 said:
1. Download the latest firmware for your device: 3 HERE
2. Flash it via ODIN. Reboot your device and take a look if you have wifi or sound. Reflash the same firmware that you downloaded in the step 1 if not. Remember that dialing *#1234# have to appear this for fix the calling/wifi:
AP: I337MVLUFNI2
CP: I337MVLUFNI2
CSC: I337MOYAFNI2
3. Good luck :highfive:
Click to expand...
Click to collapse
Thanks for the reply I'll try it when I get off of work
So let me get this right I DL it flash it check it if its good with sound and WiFi I flash it again?
What about if it isn't good with WiFi or sound any thing else I can try
Also when I dial that number now it pops up connection problem or invalid mmi if that makes a difference
stephen1617 said:
Thanks for the reply I'll try it when I get off of work
So let me get this right I DL it flash it check it if its good with sound and WiFi I flash it again?
What about if it isn't good with WiFi or sound any thing else I can try
Also when I dial that number now it pops up connection problem or invalid mmi if that makes a difference
Click to expand...
Click to collapse
1. It's the correct firmware for your device and the latest. Yes. Problem of sound/wifi are related to wrong baseband normally. Reflashing it 2 times solve the problem.
2. We will try other options.
3. You have to install STOCK ROM for dial *#1234# first.
Joku1981 said:
1. It's the correct firmware for your device and the latest. Yes. Problem of sound/wifi are related to wrong baseband normally. Reflashing it 2 times solve the problem.
2. We will try other options.
3. You have to install STOCK ROM for dial *#1234# first.
Click to expand...
Click to collapse
You my friend are a life saver I can't thank you enough this worked and I was able to call my son tonight :laugh:
Now it's time to hold my end of the deal pm me you PayPal address I'll send you 25$ for your help
never mind i seen your donate button after
sending now
Joku1981 said:
1. It's the correct firmware for your device and the latest. Yes. Problem of sound/wifi are related to wrong baseband normally. Reflashing it 2 times solve the problem.
2. We will try other options.
3. You have to install STOCK ROM for dial *#1234# first.
Click to expand...
Click to collapse
hey i noticed today my phone wont do mobile data even tho i have it enabled any idea how to fix this every thing else is fine just no mobile data
stephen1617 said:
hey i noticed today my phone wont do mobile data even tho i have it enabled any idea how to fix this every thing else is fine just no mobile data
Click to expand...
Click to collapse
Restart phone?
white7561 said:
Restart phone?
Click to expand...
Click to collapse
tried that tried factory resetting tried removing the sim i know its not hardware because it was working on the custom rom but not this stock one
stephen1617 said:
tried that tried factory resetting tried removing the sim i know its not hardware because it was working on the custom rom but not this stock one
Click to expand...
Click to collapse
check your APN settings you may need to reset them back to your carriers standard settings
stephen1617 said:
tried that tried factory resetting tried removing the sim i know its not hardware because it was working on the custom rom but not this stock one
Click to expand...
Click to collapse
1. Go to Settings - Connections (TAB) - More Networks - Mobile Networks - Access Point Names (APN).
2. Take a look: HERE or HERE.
3. Reboot your device when you finish of add that settings.
4. You will have the data back