LG G4 Leather Already Peeling - G4 General

Welp the corners of my LG G4 already starting to peel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yep mine started near the 3.5mm jack

wtf are u doin with your phones?
Sent from my unlocked and rooted LG-H815

Putting it in and out of my pocket
Sent from my LG-H811 using Tapatalk

The leather from what I read is a thin layer. Not surprised the corners are wearing off. I'm guessing if the phone goes in your pocket daily the corners could wear off pretty easy.
Sent from my LG-E980 using XDA Free mobile app

Mines showing a little. But its also getting softer.

same here, top corners

I returned my leather phone due to the touchscreen issue, I think I'm finally convinced to replace it with the plastic one.

My leather one was looking old even with it being in a case. I returned it and got a Metallic Grey one instead.

So it is a lot better to get the Metallic Grey instead of any leather back?

LancerV said:
Putting it in and out of my pocket
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Obviously the solution is to not remove it from your pocket on a daily basis.
Seriously though, wtf, LG? This should have been one of the first things to QC, right after "Does the leather actually stick to the plastic?"

But hey! 2 for $70!!! lol wow LG... I think I'll finally get a case and hope 1- that the leather holds up and 2- that the case will fit...

LancerV said:
Welp the corners of my LG G4 already starting to peel
Click to expand...
Click to collapse
That sucks. Can't believe I trusted LG to deliver a decent product. All form, no function.... Samsung here I come.

Uh, function is still there. The function of the back cover is to keep everything in the back from falling out.

Anyone know where we could purchase the plastic cover from?

chrisokaly said:
That sucks. Can't believe I trusted LG to deliver a decent product. All form, no function.... Samsung here I come.
Click to expand...
Click to collapse
Wouldn't it be all function no form?
Sent from my LG-H811 using Tapatalk

LancerV said:
Wouldn't it be all function no form?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
I think of it as form = looks good on surface, function = how it actually performs. In this case the leather looks good on the surface but in reality is garbage.

Gemichi said:
So it is a lot better to get the Metallic Grey instead of any leather back?
Click to expand...
Click to collapse
I'd get gold if it was offered. Tmo only had grey.
Sent from my LG-H811 using Tapatalk

chrisokaly said:
Samsung here I come.
Click to expand...
Click to collapse
I laughed at this because I ditched Samsung for this phone. I was loyal to Samsung for a few Galaxy's. I was even made a Rom for a Samsung device. I find the G4 far superior to the Galaxy line. I will be extra happy when the screen glitch is fixed with the missed taps.
Its kind of neat seeing all the different opinions about device choices.
On topic, I chose the metallic grey because I when I viewed both backs and felt them, I felt the leather back seemed to be a cheap plastic fake leather.

Honestly, I'm surprised that so many people are surprised by this. I mean, has anyone noticed how thin the leather is when examining the back cover off the phone? It's not full-grain leather. It's not auto seat or furniture thick. I'm kind of surprised it sticks at all. It's not a Vertu Signature Touch, that's for sure.
What Motorola did right in comparison with the Moto X was to not expose the leather at the corners of the phone. I was skeptical of LG going with a leather back from the G4 announcement (or leak) since Motorola was using a higher quality leather and I pretty much knew the exposed corners relegated the G4 leather to a show cover rather than a daily. My leather travel wallet told me all I needed to know about corner wear.
The black stamped pebble grain back will fare a little bit better, but probably not by too much.

Related

Official Bumper Thoughts?

Anyone that got the bumpers from the Play Store, can you share your thoughts, please?
I couldn't get one and want to know if it would be worth it to get one whenever stock comes in. Thanks.
I Love 2PAC
I have recieved my Bumper, but not the phone itself, because it was sold out, I wanted to get the case just to get THAT much closer to the N4.
It's made of some high quality metal, i'm guessing Aluminium. It's pretty light, at only 20g, it should be able to resist most drops and scratches, but the shock might travel through the metal to the phone, so I don't know. We'll have to wait for a few drop tests on YouTube, cause there's not way I'm putting my N4 on the line.
LaviLoki said:
I have recieved my Bumper, but not the phone itself, because it was sold out, I wanted to get the case just to get THAT much closer to the N4.
It's made of some high quality metal, i'm guessing Aluminium. It's pretty light, at only 20g, it should be able to resist most drops and scratches, but the shock might travel through the metal to the phone, so I don't know. We'll have to wait for a few drop tests on YouTube, cause there's not way I'm putting my N4 on the line.
Click to expand...
Click to collapse
So its metal not plastic? That's awesome! Makes the $20 dollars even more worth it :good:
Looks and feels High Quality
lookitzjohnny said:
So its metal not plastic? That's awesome! Makes the $20 dollars even more worth it :good:
Click to expand...
Click to collapse
It FEELS like metal, however it could be just plastic with a metallic overlay :L. It feels premium, though.
Should've said that in my previous post, sorry.
lookitzjohnny said:
So its metal not plastic? That's awesome! Makes the $20 dollars even more worth it :good:
Click to expand...
Click to collapse
Can we get some pics at different angles, please?
Is the inside of it metal? I'd be afraid of it breaking the glass.
LaviLoki said:
It FEELS like metal, however it could be just plastic with a metallic overlay :L. It feels premium, though.
Should've said that in my previous post, sorry.
Click to expand...
Click to collapse
No problem! but if you can please post some pictures it'll be much appreciated! Since google doesnt have any close ups.
I have no idea what good a bumper would do so I didn't purchase one. Instead, I bought screen protector for both front and back, and a PTU case.
If Google sold a case, I would be happy to buy one.
Oooooooooh nice, premium quality. So glad I ordered it. All those haters where a little distracting...
Can we have some pics?
Metal?! Wont that interfere with the wireless charging?!
Pics, pics, pics! Pleeeeeeeaaaaaaassssssssssee..
itspb said:
Metal?! Wont that interfere with the wireless charging?!
Click to expand...
Click to collapse
It shouldn't. If I remember my physics correctly, a magnetic field between the two coils should only occur inside, leaving no current to be induced anywhere else. Including a metallic bumper.
Sent from my GT-I9000 using xda app-developers app
Ture, but while you are trying to position the phone on the mat, a current might be induced in the bumper if it is made of metal.
It can't be all metal because you won't be able to put it on, all metal bumpers consist of two parts and screw to each other.
Pictures plz
I think its rubber in the inside with a metal(ish) ring around the outside. I don't have mine yet but from googles pics that is what it looks like.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I wish google's official pictures show how the bumper looks like when it's actually on the phone... . That was one of the reasons I didn't buy it when it was first available.
LaviLoki said:
I have recieved my Bumper, but not the phone itself, because it was sold out, I wanted to get the case just to get THAT much closer to the N4.
It's made of some high quality metal, i'm guessing Aluminium. It's pretty light, at only 20g, it should be able to resist most drops and scratches, but the shock might travel through the metal to the phone, so I don't know. We'll have to wait for a few drop tests on YouTube, cause there's not way I'm putting my N4 on the line.
Click to expand...
Click to collapse
Pics please!
Sent from my Galaxy Nexus using xda app-developers app
No basic dry screen / back protector with it ?
Damn, for 20 bucks they could have done so ...
:crying: we need some pictures and a video review

Explain the reason samsung uses glossy plastic instead of matte like on the S2

Glossy plastic picks up a ton of fingerprint smudges and ends up looking like #%&! real quick
Seems like a better choice would be a matte version like on the S2 seen here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Because Samsung is clueless when it comes to aesthetics. Not only does matte hide fingerprints but it just looks so much better as well.
Sent from my Nexus S using xda app-developers app
Glossy Plastic looks more classier than matte. But when you touch it doesn't feel so great.
I think they should start using aluminium like Apple and HTC.
who cares buy a case
anyone who has this phone WITHOUT a case is silly, protecting an extremely expensive (in most countries) piece of technology from harm is more important than what colour it is, what its made out of.
as far as anyone should be aware, the screen quality should be all that matters, since its all that should be poking through the case you have over your phone to protect it from damage.
they are helping CSI so they can easily get your fingerprints out of the phone
coz it looks great. simple buy a case
Sent from the State where marijuana is not illegal
How can it look great when you put a case over it. The guy asked for example why is the sky blue and your telling that train has steel wheels. Totally out if theme.
Samsung has a lack of design and looks when you compare it with the others. Samsung and Lg build bricks from plastics not worth a [email protected]& . Got this one from work I think I'll buy htc for private use.
Sent from my GT-I9505 using XDA Premium App
i'm not complaining on what they did,
it's hyperglazed polycarbonate plastic, same material as bulletproof glass
They put a pattern on the plastic so the fingerprints don't stand out. You can only see them when looking at an angle.
Sent from my GT-I9505 using xda app-developers app
Matt, gloss or metal wouldn't make a difference to me, as i always put my £500+ smartphone in a case for the simple reason of protection, last thing i want to happen to my phone is for it to get scratched up or break, I even go as far to stick it in a pouch aswell with the case on when it's in my pocket at work for that extra bit more protection, so when it comes to selling it on my phone as good as the day i bought it.
Fatos said:
How can it look great when you put a case over it. The guy asked for example why is the sky blue and your telling that train has steel wheels. Totally out if theme.
Samsung has a lack of design and looks when you compare it with the others. Samsung and Lg build bricks from plastics not worth a [email protected]& . Got this one from work I think I'll buy htc for private use.
Sent from my GT-I9505 using XDA Premium App
Click to expand...
Click to collapse
So why did you buy it if you don't like it ?
And btw s4 with its plastics cost more to make than iphone 5 with all its aluminium.
Why should I hide a beautiful phone in a case? Would you do the same with a lamborghini cause its so expensiv?
Question answered itself in case of the S4: Nothing beautiful to hide.
shox22 said:
Why should I hide a beautiful phone in a case? Would you do the same with a lamborghini cause its so expensiv?
Question answered itself in case of the S4: Nothing beautiful to hide.
Click to expand...
Click to collapse
Go back to hide your "beautiful" aluminum phone with a case like all the other users here in XDA do (more than 130 pages):
http://forum.xda-developers.com/showthread.php?t=2171713
And this is only one thread of many...
^Haha yeah. I'd love to know the percentage of the "beautiful" phone owners who'd not put a case on their phones. Good luck with that.
Either way - I'd love to know what OP asked too, seriously. I mean sure, it might be a moot point etc - but why? Is glossy plastic easy to manufacture than matte?
I like samsungs design and use a case only if im at work,if something goes nuts i repair it by myself.
I had every S series galaxy since the first one and the only issue which i had was a defect usb port because of water damage.
I bought a new port and repaired it by myself.
Sent from my GT-I9300 using xda premium
I've never used a case with any of my smartphones and never had a problem ... Won't use a case with the SGS4 either. It's big enough as it is.
But I have to agree, the backcover of the SGS2 is much better. I guess Samsung went with the glossy one, because too many people complained about the cheap look of SGS2's backcover. That happends when function follows form ... too bad.
The design had to be different this time around cause of the lawsuits. I have the black model and have been getting a lot of compliments
Sent from my SGH-M919 using xda app-developers app
Android_Monsters said:
The design had to be different this time around cause of the lawsuits. I have the black model and have been getting a lot of compliments
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Me too, even from iPhone owners

No Gapgate here...

Just got my Verizon Note 4 today and there was no "gapgate" issue with my phone.
Anybody else get their phone with the gap?
Edit: Mine was a White Pre-Order from Verizon.
I got one for myself and my wife. The one that arrived from Verizon in the mail had a slight gap. The one I purchased from the Verizon store was perfect.
Gap gate?
Mine is perfect. Black and ordered through Verizon
heystek said:
Mine is perfect. Black and ordered through Verizon
Click to expand...
Click to collapse
White, no issues here.
We picked up two black from best buy and both are perfect. I think Gap gate was just bs.
brynwall said:
Just got my Verizon Note 4 today and there was no "gapgate" issue with my phone.
Anybody else get their phone with the gap?
Click to expand...
Click to collapse
The gapgate was a joke! It was a way for iclowns to feel better about their easily bending iphones lol
Sent from my SM-N910V using XDA Free mobile app
I don't have gapgate, but my screen does seem recessed into the bezel pretty good. There is an edge on the inside of the bezel. Guess i wont have any glass screen protector thickness issues
No gap gate either but I do have a chip in the bezel ? not a huge deal but I hate having problems with a brand new device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edge1978 said:
No gap gate either but I do have a chip in the bezel ? not a huge deal but I hate having problems with a brand new device
Click to expand...
Click to collapse
What case is that?
Sent from my SM-N910V using XDA Free mobile app
shpotik said:
What case is that?
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
It's a silicone cover from Verizon
Mine has a pretty good gap on the top side of the device. Dust keeps getting on there and building up. Not sure if I should return it before the 14 days is up.
No gap but mine has some small scratches on the screen hardly noticeable but upsets me because its brand-new. Not worth returning though
dcbm31 said:
No gap but mine has some small scratches on the screen hardly noticeable but upsets me because its brand-new. Not worth returning though
Click to expand...
Click to collapse
Mine also has some scratches. Located on the metal bezel of the phone.
Chuckleb0ne said:
Mine also has some scratches. Located on the metal bezel of the phone.
Click to expand...
Click to collapse
Is yours black or white?
No gap. Black.
I forgot to mention that mine was one of the White pre-orders from Verizon.
My Black Pre-order had a pretty substantial gap on the top as well as a nice sized gash on the inner portion of the aluminum border where the gap is located. VZW is sending me a new device. I hope that this one doesn't have the same issue.
black vzw, mine is perfect.
wingchun108tek said:
My Black Pre-order had a pretty substantial gap on the top as well as a nice sized gash on the inner portion of the aluminum border where the gap is located. VZW is sending me a new device. I hope that this one doesn't have the same issue.
Click to expand...
Click to collapse
Did VZW give you any issues. My 4 came with chip near the headphone jack. And they are giving me all sorts of troubles. They told me they could send me a new one but they'd have to charge me the Retail price and then once they receive the old phone they'll refund it. According to them "We can't tell when the chip happened" even though I called less than 24 hours after receiving the phone

Button bezel wear and tear

Anyone else who has had a G3 for a while noticed this? As you can see in the image, because of use over time the gap between the lens and top button has visible wear from the finger constantly coming into contact with it. I don't mind it as I run my G3 100% naked so it's scuffed up anyway, bit I thought it was an interesting place for use wear
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 7 using Tapatalk
:what:
_________________
IT'S OVER 9000!!
esimon311 said:
:what:
_________________
IT'S OVER 9000!!
Click to expand...
Click to collapse
:whatnot:
Yes mine has this scuff mark in the same place, phone has always been in the circle case, it must be slightly raised to protect the camera, don't have another camera to a hand to take a picture, but will try get a pic of it.
Damn it now I'm going to be OCD with this issue ......
2SHAYNEZ
shayneflashindaily said:
Damn it now I'm going to be OCD with this issue ......
2SHAYNEZ
Click to expand...
Click to collapse
Sorry :cyclops:
Lol its all good.. I have a white g3 and I'm putting a dbrandz true fit skin on it so I'm not going to run a case with it ...lol ... I'll figure some way to cover that piece
2SHAYNEZ
Yup it was bothering me lol... I got my dbrand skin tonight and had to custom make a small piece for it lol :thumbup::beer:
2SHAYNEZ
shayneflashindaily said:
Yup it was bothering me lol... I got my dbrand skin tonight and had to custom make a small piece for it lol :thumbup::beer:
2SHAYNEZ
Click to expand...
Click to collapse
Maybe its just me but that straight bottom cut on that "custom" piece that you made is causing even more OCD issues looking at it. Should have made it to cover the corners as well man. It just looks... unfinished to me. Sorry.
[edit][offtopic] @shayneflashindaily Btw, how does the dbrand skin feel in hand? The texture I mean, is it more grippy or smooth? I've never used one till now and planning to get them shipped to India. Slickwraps or dbrand? [/offtopic] [/edit]
if4ct0r said:
Maybe its just me but that straight bottom cut on that "custom" piece that you made is causing even more OCD issues looking at it. Should have made it to cover the corners as well man. It just looks... unfinished to me. Sorry.
[edit][offtopic] @shayneflashindaily Btw, how does the dbrand skin feel in hand? The texture I mean, is it more grippy or smooth? I've never used one till now and planning to get them shipped to India. Slickwraps or dbrand? [/offtopic] [/edit]
Click to expand...
Click to collapse
Order both ... I have only tries dbrands..... And that little piece is good enough for me as long as it keeps it from getting any scratches on that piece .. Lol you try cutting a small ass piece for that part... It wasn't a easy task
2SHAYNEZ
leomd333 said:
Anyone else who has had a G3 for a while noticed this? As you can see in the image, because of use over time the gap between the lens and top button has visible wear from the finger constantly coming into contact with it. I don't mind it as I run my G3 100% naked so it's scuffed up anyway, bit I thought it was an interesting place for use wear
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I have the same on mine, but like someone above me said it is because that part of the phone is slightly raised so when you put your phone down (without a case or with the LG Quick Circle case) that part is touching the surface your placing your phone on. So I don't think it is because of your finger..
Klyupp said:
I have the same on mine, but like someone above me said it is because that part of the phone is slightly raised so when you put your phone down (without a case or with the LG Quick Circle case) that part is touching the surface your placing your phone on. So I don't think it is because of your finger..
Click to expand...
Click to collapse
Ah yes true, just noticed that. Actually quite clever that LG did this, instead of letting the lens take the beating haha
Sent from my LG-D855 using Tapatalk
I might try to cut out my own piece again tonight .. Figured dbrand would have thought about this .. Pfft
2SHAYNEZ

Slickwrap for the Z-force?

Has anyone gotten a Slickwrap for their Z Force?
I ordered 1 and when I received it, the sides were clearly cut for the Z. I just received the replacement and it is the same.
lvgdgts said:
Has anyone gotten a Slickwrap for their Z Force?
I ordered 1 and when I received it, the sides were clearly cut for the Z. I just received the replacement and it is the same.
Click to expand...
Click to collapse
I just ordered one... I'll confirm once I receive it.
I just sent got the dbrand xda 2 pack deal, gives the back a little protection, adds some grip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my XT1650 using Tapatalk
I got the slickwraps. Tore that sucker off because it interfered with my moto mods (Would not connect properly) even though it's aligned as best I could.
The side pieces are perfectly aligned, no issues here. They must have fixed it.
Well, I have now gotten 2 replacements and each one has been too small to cover the sides of the Z Force. I am going to request a refund.
Good idea. I ordered a wood skin if that changes anything...
D brand skins has nice sets. Customizable. I just ordered a camera skin. It scratches too easy, and a skin should fix it.
Sent from my XT1650 using Tapatalk
D brand looks good, but it doesn't seem to offer side protection.
lvgdgts said:
D brand looks good, but it doesn't seem to offer side protection.
Click to expand...
Click to collapse
That they don't. Dbrand usually prioritizes fit before adding extra fluff. If the side pieces aren't supplied, it's usually because they thought it would be too much trouble for users.
Slickwraps just goes for volume.
does the wrap (dbrand or slickwraps) help with how slipper the phone is? I want to use the phone without even the style mod.
50% off right now at slickwrap got one for my moto z,3ds,Xbox controller and S7.
Sent from my Nexus 6 using Tapatalk
For some reason, mostly sales, i keep ordering Slickwrap skins and I highly don't recommend them.
The last one I ordered, marble, looked plain bad, nothing like the photo on the site. Same thing with the gold flake, thing was actually kind of metallic. Odd for a wood skin but...
Bought one for the G3 and it's fit was uncomfortable, not to mention the mahogany wood grain was not as realistic as the exoskin I was used to or dbrand.
Plus when I ordered my black marble skin my wife order a few for he v20. It took 20 days to arrive.
Not a fan at all.
fr4nk1yn said:
For some reason, mostly sales, i keep ordering Slickwrap skins and I highly don't recommend them.
The last one I ordered, marble, looked plain bad, nothing like the photo on the site. Same thing with the gold flake, thing was actually kind of metallic. Odd for a wood skin but...
Bought one for the G3 and it's fit was uncomfortable, not to mention the mahogany wood grain was not as realistic as the exoskin I was used to or dbrand.
Plus when I ordered my black marble skin my wife order a few for he v20. It took 20 days to arrive.
Not a fan at all.
Click to expand...
Click to collapse
I usually go for dbrand all the way. Tried slickwraps just out of curiosity... Ended up tearing the sucker off because it interfered with my moto mods. Took them 1 month to respond to my RMA request...
I got a marble skin on special during their 30% sale for it... It's decent, but marble effect looks a little faded. Don't know how it compares to slickwraps.
karendar said:
I usually go for dbrand all the way. Tried slickwraps just out of curiosity... Ended up tearing the sucker off because it interfered with my moto mods. Took them 1 month to respond to my RMA request...
I got a marble skin on special during their 30% sale for it... It's decent, but marble effect looks a little faded. Don't know how it compares to slickwraps.
Click to expand...
Click to collapse
I guess I should've taken a photo. I don't think anyone could tell the Slickwraps marble skin, I ordered the black, was supposed to be marble. There was no texture. It was like they printed a marble texture on plain vinyl. My only comparison, again since I'm a wood skin fanatic, is the dbrand concrete. That wasn't obvious as concrete, my wife thought it was supposed to be wood, but it was textured as you'd expect.

Categories

Resources