Database Users

Really Stuck

Anyone help me here???
Messed up somehow with wrong update zip and anyway
(i was on ics bootloader from going through all the updates
and trying to start over and believe i used the update.zip for hc 3.1)
I am stuck with
Black screen has acer logo and top left
in red letters it says Boot Verified Failed ...
What can I do from here???

Well tried the euus and it never finishes
goes into download mode to device and just gets stuck
cant do volumne & power or anything
really bricked up
what can i do from here??????

Try this thread.....
http://forum.xda-developers.com/showthread.php?p=33610908
It saved mine. Not sure if you have the same thing, but it may help you.
Sent from my SGH-T999 using xda app-developers app

Please help..Tab stuck on Acer Logo..just like that

So my tab is unrooted...never flashed anything..in short completely clean..so as i was using it for my daily use...i was playing a game then without closing it i switched off the tab...now when i try to switch it on it is stuck on acers Logo...
Please help me what to do...im too afraid..
And yeah i have charged it so its not a battery issue..
Thanks
Sent from my Xperia S using xda app-developers app

If you don't have any important things, boot into recovery, data reset.
Sent from my A100 using xda app-developers app

I would try a factory reset first. Caution: All data on the tab will be lost!
http://www.youtube.com/watch?v=_k9HYj93zHc
Gesendet von meinem A501 mit Tapatalk 2

same situation
I'm in the same situation, with a similar method getting into the situation-- son playing game, I tried to back out, and powered down only to be unable to boot past Acer logo. (tab not rooted or reflashed, stock OTA for ICS)
I have tried factory reset to no avail. I contacted Acer support, but my tab is out of warranty. the tech mentioned I could get it reflashed for $99, but he also suggested I might try flashing a custom rom to see if that would work.
Any advice would be appreciated. I've only rooted a Droid Eris before, and it was with an app downloaded from the Play Store. Without being able to access the tab past the Acer boot screen, I'm not clear on how I might load a custom rom.
Thanks in advance!

They wouldn't even TALK to me on the phone because it was out of warantee... Just told me Too bad, so sad. and hung up.
As for fixing your issue. Double check that you're pressing the right button combonations. I know that sounds super silly but I had this messed up for days trying to get my tablet up. I thought it was cooked. Vol + (Button furthest away from power button) with the power button and flicking toggle switch is what you need.

JohnHaxx said:
They wouldn't even TALK to me on the phone because it was out of warantee... Just told me Too bad, so sad. and hung up.
As for fixing your issue. Double check that you're pressing the right button combonations. I know that sounds super silly but I had this messed up for days trying to get my tablet up. I thought it was cooked. Vol + (Button furthest away from power button) with the power button and flicking toggle switch is what you need.
Click to expand...
Click to collapse
I didn't try the phone. I posted in the support forum, and one of the Acer techs PM'ed me. He confirmed I was out of warranty, then advised trying to flash a new ROM, or send it in for official Acer reflash for $100.
I've gotten into three different modes on boot-up:
- Factory Reset (User data/cache erased) - still gets stuck on Acer logo
- Boot recovery (?? load update.zip from SD card) - updating Android bot turns into dead Android bot w/red exclamation point
- USB Bootloader mode - can't do anything in this mode that I'm aware of

[Q] Clean Rom won't boot on new G2

Hi All,
I just rooted and put the latest TWRP on my new Verizon G2.
I installed clean rom 1.0 and the install finished succesfully. when trying to reboot for the first time after install, I'm stuck at a black window immediately after the LG logo splash screen, which only has the following information in small writing in the upper left corner:
[810] Fastboot mode started
[860] udc_start()
I can't seem to get past it and can't get back into the recovery. Any ideas? I'm stuck without a working phone right now.
Thanks very much!

Did you flash the one for the Verizon phone?
Sent from my VS980 4G using XDA Premium 4 mobile app
---------- Post added at 03:02 AM ---------- Previous post was at 02:59 AM ----------
If you flashed the one in the op then I believe you need to flash back to stock because that one in the op is not intended for Verizon. His link has been down for quite some time now. But head over to general forum and look for Verizon back to stock... Takes about 30 mins to get it all setup and done. Then reroot
Sent from my VS980 4G using XDA Premium 4 mobile app

What method used for root and recovery?
What method are using to flash ROM?
You check all your md5s?
Sent from my VS980 4G using xda app-developers app

Full clean etc
Did you:
a) nandroid backup
b) factory reset
c) clear caches
d) install rom
(standard procedure I realize)

Thanks for all the replies guys... appears to have been a bad download. Haven't had one in a long time so I was lazy checking the MD5s last night.

Solution
ahughes5 said:
Hi All,
I just rooted and put the latest TWRP on my new Verizon G2.
I installed clean rom 1.0 and the install finished succesfully. when trying to reboot for the first time after install, I'm stuck at a black window immediately after the LG logo splash screen, which only has the following information in small writing in the upper left corner:
[810] Fastboot mode started
[860] udc_start()
I can't seem to get past it and can't get back into the recovery. Any ideas? I'm stuck without a working phone right now.
Thanks very much!
Click to expand...
Click to collapse
Just repaired this at my shop by taking off the back of the phone & back plate above the battery & unplugging the battery.
turn on LG Mobile support tool
Go to Options & select upgrade recovery
Plug back in battery & press volume up while plugging phone into computer to trigger download mode
Let the LG Mobile support tool work & reload the operating system
Good Luck

[Q] Bricked A500 tried everything, I think!

Ok I have a stock acer a500, one day it went to shutdown, I turned it on and guess what? hung at the ACER screen, I finally got my CPUID & SBK (thank you linux, love that ****) well I tried the apx flash tool with every bundle it would let me download, they all finish but it always hangs at the acer screen! Ive tried barbsector and got an error which i will post later if the tdv4 tool doesnt work which im running right now! i have previously put two mainboards into this thing and this is the thanks i get! well anyways I need some help here! I do not want to hear the nand issues I know about this already, please insight someone?

euu did nothing just hung!
now using apxtool with EUUs_SBK_Acer_A500_1.016.05_COM_GEN1.apx will see how this goes

did what i said i was gonna do and...
darkeskye said:
now using apxtool with EUUs_SBK_Acer_A500_1.016.05_COM_GEN1.apx will see how this goes
Click to expand...
Click to collapse
still hanging at the acer screen! totally stumped now, help please!

I don't even get an acer logo. I'm stuck in APX mode so black screen no text no logo power button lit white.
Does your screen just have the acer logo or do you see some white text in the top left corner?

[Q] a501 bricked and the recovery mode does not work

I have a rooted a501 tablet and I accidentally bricked it after I tried to Install gL tools on it.
But when I boot into recovery it just shows some small white words on the top left corner then it shows and Android guy with a yellow triangle in it. And when I boot my tablet up normally it just shows the acer logo and it wont go past that.

I got one doing the same thing. Nothing has helped.
Sent from my SM-N900V using Tapatalk

I did some research on it and i figured out that all i need to do to unbrick it is move some files around to fix it but i cant get my computer to apply the drivers for the tablet.
Sent from my SAMSUNG-SM-G730A using XDA Free mobile app