Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
solution
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
hi i followed your instructions afte having the same problem.
once it was flashed and at the samsung logo
i took battery out, replaced it and started phone in recovery mode. go to wipe factory reset
then reboot
mine worked and is ok .
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
darkman13 said:
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
Click to expand...
Click to collapse
Do either of you have a 16 GB version?
Hi All,
My problem :
I wanted to install the official kitkat rom but I made a big mystake : I took N900 files instead of N9005...
After that I successfully installed the right bootloader and CWM.
I installed some cuustom roms but the setupwizard crash at the last step
I tried to flash the complete official 4.4.2 rom but odin failed with message on the phone : "ODIN : invalid ext4 image"
Anybody has any idea to help me ?
hi guys i manage to fix it, well mine anyway worked by flashing the pit i found on xda and selecting repartion on odin 3.7 along with german 4.4.2 to my n9005 from Hong Kong, re booted and done a factory reset via volume button also wiped cache and re started and it came back alive on the selected german rom 4.4.2. hope it hels others. ps my note 3 was from hong kong n9005 32gb
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
hey, i wasnt trying to downgrade, i was going from cm11 to official 4.4.2. i've got a 32gb model from france i believe (the box has french written all over it so do the manuals)
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
dude, you are god thank you so much for that, working perfect now
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
After installing DBT NB4 FW ( or with Polish NB3 FW) my LTE speeds become almost 0.
I tried multiple installs.
Any guidance?
Quick tip: Uninstall KIES.
Kies is like a big brother.
Use ODIN 1.85 and tick update phone bootloader. That's how I fixed mine. The other versions of Odin wouldn't let me update bootloader.
Of course, before you do this Flash/wipe data in recovery mode.
But uninstalling KIES solved my issue.
Sent from my SM-N9005 using Tapatalk
Hey guys so about 2 days ago i ran into some problems with trying to find the correct firmware file from sammobile and other resources but i just could seem to find it for mine becasue mines didnt have a carrier along with it so i did alot of searching and i found it! this also helps fix the overwrite file error in odin to root your galaxy s5 g900h just flash it using odin and ounce the WHOLE PROCESS is done and the little android progress bar is done then before your phone boots up completely take out the battery and use the stock recovery to wipe data then do the steps you would do to root your phone
Link to unbranded galaxy s5 G900H
http://terafile.co/07419ff9d580
..
Hi everyone,
This is my first post and I hope that I am in the right section.
As per info in the thread title, I have a Malaysian Samsung Galaxy Note 3 updated to the last available firmware 4.4.2
I am trying to flash Lollipop with Odin (i followed all the instructions in the guide, literally step by step).
I have tried with the italian Lollipop update branded Vodafone, but Odin always failed and the phone was soft bricked.
I have reinstalled the original malaysian firmware 4.4.2 that i had prior this attempt. phone booted ok and worked perfectly fine.
Then i downloaded the lollipop firmware from poland, this thime odin completed the process and gives me a pass. but the phone goes in boot loop (samsung logo at booting never goes away). I have tried to reboot in recovery mode and wipe the cache. but still boot loop.
Would anyone be so kind to explain what i am doing wrong and how i could install lollipop on my malaysian galaxy note 3?
Any help would be much appreciated.
Luc81
Wipe all before flash lollipop.
Joku1981 said:
Wipe all before flash lollipop.
Click to expand...
Click to collapse
Thanks,
actually I have just managed to flash it correctly about 1 hour ago. i didn't need to wipe my data. Now it works properly.
Thanks anyway for your help!
hows your experience ?
just let us know what was the mistek, so others wont have to ask the same question again ...hehehe
all the best!
note 3 lolipop(Malaysia) N9005
Guys good news because this morning when I was checking my software update ... Thru Ota is about 860mb and thru keis 3 is about 1.3gb. Took me couple hours to download and about 1hour ++ to install. Booting up took some time and luckily everything is working fine for the time being.
Anyone updated and how's the battery draining issue.
i try update my note3 using kies3, it confirmed lollipop 5.0 available to update, but unfortunately my note3 repeatedly crash during upgrade and window on kies top up said "PC cant recognized my phone". Maybe cause of my knox warranty void 0x1 (trip). i hack on local C:\Users\YOUR NAME\AppData\Local\Temp and get copy of *.zip files (N9005DXUGBOD1_N9005OLBGBOD1_HOME.zip). It was lollipop firmware version for malaysia. Upgrade it using Odin and succesfull installed.
Lolipop
I was having the same issue while updating thru keis. So I downloaded it thru OTA. Battery sucks after lolipop. If you are facing any issue just send me a mail
Like a month ago, my S5 home button started to act up. Verizon said they had to send me another phone. So, I unrooted that phone and sent it back. When I received the replacement phone, it was on 5.0 B0G5. At the time, there was nothing out to root it. I checked and found a page on here by jrkruse with the steps.
Long story short, the phone is bricked, I have been killing myself all day trying to find the stock firmware so I can flash it with Odin. I cannot find it NOWHERE!!!! Cannot use Kies because I do not have a recovery code. And for some reason, my s/n is not working when I enter it in kies to have it redownload 5.0..
So, I need the .tar for this firmware of if someone knows of a way that I can get it on the right track to continue to root it, I would appreciate it. In the meantime, I wll be using my backup..
Thx in advance!!!
sammobile . com
samsung-updates . com
ODIN to flash
Hi all
I am a silent reader of this forum since long but for the first time I feel like as if I am in a real trouble. A couple of days ago I got a Note 3 International version N9005 Snapdragon from a friend. It was running on 4.3 rooted version so I tried to update it to 5.0 stock using odin (Sammobile UK BTU firmware). Something went wrong over there and i got a FAIL message from odin. There onwards I tried searching all over the web but couldn't bring it back to life. One thing I never tried and won't do it that is use of pit file for re-partitioning. Now at this moment it has got a CWM recovery 6.0.4.7-kk(0125) installed but whenever I even try to flash a custom rom, it installs successfully but after reboot i am stuck again samsung logo. I have tried using a few kk custom roms with no success and also tried flashing 4.3, 4.4.2 and 5.0 stock roms from odin with again no success. Now my aim is to bring this thing back to life. Kies 3 gives a message that your device is not compatible with this version of kies.
Waiting for some expert opinions, I am ready to start from the beginning.
Regards