Hi guys,
today i flashed the emotion kernel on my cm12.1 n910f, cause i thougt it'd work.
After this step my phone did not boot anymore. I flashed cm12.1 again, boots as usual but my screen is wrong calibrated. I press on the screen and the note thinks i press about one inch down and a little right.
I really tried everything to solve this problem. I had to factory reset because i could not draw my lock pattern anymore.
After that I flashed the stock rom, updated stock rom, reinstalled twrp, wiped everything, flashed cm12.1 again, flashed another kernel, flashed stock rom again.
The s-pen doesnt work anymore, not even on stock rom.
Could anyone please help me?
Thanks a lot!!
First thing you're gonna want to do is ODIN flash your factory base, reboot and test your screen calibration and S-pen now. Report back.
If it works now, you can start over and flash TWRP, and put a rom on it..
boostnek9 said:
First thing you're gonna want to do is ODIN flash your factory base, reboot and test your screen calibration and S-pen now. Report back.
Click to expand...
Click to collapse
Did not work for me. Still the same issues.
geoeffrey said:
Did not work for me. Still the same issues.
Click to expand...
Click to collapse
Make sure you flashed the full ODIN package and not just firmware... If you flashed the full ODIN package and it's still doing the same, seems you would have a defective device..
boostnek9 said:
Make sure you flashed the full ODIN package and not just firmware...
Click to expand...
Click to collapse
Okay well I think I don't have a full package anymore. Is there a way to get it anywhere? Google says no?
okay, found the solution in the cm12 thread here.
"dial *#2663# and update the touch FW by pressing "TSP FW update (General)"
works for me. Thanks for your help!!
geoeffrey said:
okay, found the solution in the cm12 thread here.
"dial *#2663# and update the touch FW by pressing "TSP FW update (General)"
works for me. Thanks for your help!!
Click to expand...
Click to collapse
Thank you geoeffrey! You're a lifesaver!
Just shared something another user found out
Btw this code works on stock rom only.
Related
My phone just suddenly stopped working earlier today.it was running the latest omega rom with the latest modem and boot loader. ...
I cant get into recovery either. When I try it just reboots and goes to the samsung boot screen.my phone is a sim free insurance replacement and im not sure what stock rom to flash...
Could some nice soul just tell me the exact rom thats needed.
Its a uk based I9505 .
Please some one help as im away from home atm and have no way of contacting anyone.i have laptop and a dongle so can at least download and flash.
What ever has happened has corrupted it somehow.
I can still get into download mode how ever.
Id be eternally grateful if there is some nice soul to.help me
Just download and flash this with the latest Odin. Boot in download mode.
http://www.sammobile.com/firmwares/3/?download=33356
This is the latest German FW that Omega is based. It has the "OXA" Multi-CSC, which also includes BTU (United Kingdom)
After flash you will not have any problem retrieving all your data, as long as you don't factory reset.
iJo09 said:
Just download and flash this with the latest Odin. Boot in download mode.
http://www.sammobile.com/firmwares/3/?download=33356
This is the latest German FW that Omega is based. It has the "OXA" Multi-CSC, which also includes BTU (United Kingdom)
After flash you will not have any problem retrieving all your data, as long as you don't factory reset.
Click to expand...
Click to collapse
thanks ill try that buddy i really hope it works....
im getting worried that its really broken,,,,,,
ill have to wait till tomorrow when i have wifi
i only have a broad band dongle here so are there any other ideas if after flashing this it just sits at the sumsung screen?
cheers
Gavin01 said:
thanks ill try that buddy i really hope it works....
im getting worried that its really broken,,,,,,
ill have to wait till tomorrow when i have wifi
Click to expand...
Click to collapse
No problem man
Gavin01 said:
i only have a broad band dongle here so are there any other ideas if after flashing this it just sits at the sumsung screen?
cheers
Click to expand...
Click to collapse
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
iJo09 said:
No problem man
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
Click to expand...
Click to collapse
where do i find a .pit file? i have a feeling thats what ill have to do as i cant get into recovery
Gavin01 said:
where do i find a .pit file? i have a feeling thats what ill have to do as i cant get into recovery
Click to expand...
Click to collapse
Hi,
Here you go.....
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi,
Here you go.....
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
mate your being brilliant! downloaded the firmware which took hours lol over a mobile connection.
phone just restarts and the sits at the samsung screen with the blue light flashing...
cant get into recovery either........
how do i go about using this pit file ive never done it?
thanks again
sorry i cant see a pit file there to download?
edit found it!
iJo09 said:
No problem man
If it remains on the Samsung boot logo, then try to flash the same firmware with the .pit file and "Re-Partition" flag checked in Odin.
If still doesn't boot, then you have to enter recovery mode to wipe data/factory reset the device
Click to expand...
Click to collapse
unfortunately it still just sits at the sumsung screen with blue light flashing.....
ive left it for over 10 minutes and nothing and i still cant get into recovery....
it was working fine and all i did was download a couple of apps and then it went nuts and then wouldnt boot.
do you have any more ideas my friend?
im so desperate for this to work. im on vacation and have no phone to use for taking photos or facebook
managed to get into recovery....................
i had to hold down volume up for recovery it said it was booting into recovery then it rebooted and i had to quickly push the up button again and repeated the process a few times.
did a factory reset and i now have a basic system again! yay! although the phone is getting hot??
might just be being paranoid but i can feel the heat from it through my trousers lol
Gavin01 said:
managed to get into recovery....................
i had to hold down volume up for recovery it said it was booting into recovery then it rebooted and i had to quickly push the up button again and repeated the process a few times.
did a factory reset and i now have a basic system again! yay! although the phone is getting hot??
might just be being paranoid but i can feel the heat from it through my trousers lol
Click to expand...
Click to collapse
Glad you made it mate,
Use an app like BBS to see who is running wild an making phone go hot
http://forum.xda-developers.com/showthread.php?t=1179809
MAX 404 said:
Glad you made it mate,
Use an app like BBS to see who is running wild an making phone go hot
http://forum.xda-developers.com/showthread.php?t=1179809
Click to expand...
Click to collapse
I really appreciate ......your help......leaving it as stock for the moment after that close shave....maybe just root
Gavin01 said:
I really appreciate ......your help......leaving it as stock for the moment after that close shave....maybe just root
Click to expand...
Click to collapse
I get it mate.
might just root it and go for a new launcher
right im getting this issue again so i think i need to flash everything back to stock again and go from there.
How do i know which is the exact correct latest rom from my internation i9505....thanks people.
phone is almost getting so hot its dangerous!
If anyone can point me in the right direction id be eternally grateful.
Or even a older one than i could then OTA update?
Touch Screen being weird after wrong CR installed
Ok so i installed the wrong custom recovery file. Since then the touch screen has been off. It's hard to explain but it still works it just not where i press untill i get up in the top right left corner.
http :// i60.tinypic.com/ 2mdh0t1.png (Link to picture, remove spaces) sorry i am unable to post links)
As you can see from this screen shot, i am click on the PHONE icon at the top, and it's down below where i actually click.
Now when i use the pen it works perfectly fine, so it's not the touch screen (i believe it's self)
I have flash the stock recovery.img back, that didn't fix it, i flashed the stock boot.img that didn't fix it, then installed the whole stock rom and it didn't fix it. I am trying to fix it without doing a factory restore. So does anyone know how to fix the stuff up i have made? Any help would be amazing.
Try this:
dial *#2663# and update the touch FW by pressing TSP FW update
Click to expand...
Click to collapse
Let us know how it goes
_mone said:
Try this:
Let us know how it goes
Click to expand...
Click to collapse
You are a friggen ledgend , that worked perfectly thank you. 2 hours of googling wasted for something you answered in 30mins <3 Thank you so much
ok heres the issue....im not sure what i did wrong. i flashed a rom and got boot looped, so i said what the heck and went to odin thinking id flash stock firmware back...i did and still bootloop, then i deleted dalvik cache...still boot loop...so i flashed twrps and tried reflashing new rom...still bootloop.....wtf... so i tried odin again...bootloop...i need to fix this asap...any help..obviously this is serious if i cant get the bootloop to stop. recovery and download mode are working so no hard brick.
Primal instinct said:
ok heres the issue....im not sure what i did wrong. i flashed a rom and got boot looped, so i said what the heck and went to odin thinking id flash stock firmware back...i did and still bootloop, then i deleted dalvik cache...still boot loop...so i flashed twrps and tried reflashing new rom...still bootloop.....wtf... so i tried odin again...bootloop...i need to fix this asap...any help..obviously this is serious if i cant get the bootloop to stop. recovery and download mode are working so no hard brick.
Click to expand...
Click to collapse
Hi,
I have reported this thread to be moved to the right Q & A section where you might be able to get help quickly.
Good luck.
You flashed a custom rom?
well did you check the bootloader and modem?
example: your old firmwara was based on a coh4 and the new custom is based on coj3.. then you get bootloops.
In this case please download the fitting bl & modem to your rom!
Primal instinct said:
ok heres the issue....im not sure what i did wrong. i flashed a rom and got boot looped, so i said what the heck and went to odin thinking id flash stock firmware back...i did and still bootloop, then i deleted dalvik cache...still boot loop...so i flashed twrps and tried reflashing new rom...still bootloop.....wtf... so i tried odin again...bootloop...i need to fix this asap...any help..obviously this is serious if i cant get the bootloop to stop. recovery and download mode are working so no hard brick.
Click to expand...
Click to collapse
what version are you from the start before you flashed? please provide complete information
Its easy as anything
Download your phones official firmware from sammobile.com
Flash through odin in pda/ap tab
ankahuja said:
Its easy as anything
Download your phones official firmware from sammobile.com
Flash through odin in pda/ap tab
Click to expand...
Click to collapse
well ive done that like 3 times and it still wont come out of bootloop. its as if the phones bricked...turns on then tries to start up but turns right back off. it sometimes goes as far as saying android is starting and optimizes a few apps and shuts off
kerbiii said:
what version are you from the start before you flashed? please provide complete information
Click to expand...
Click to collapse
I originally was on android 5.1.1 cog5 build for sprint...then went to cm 12.1 remix by sabermod....when i used odin to flash back to original firmware, it kept bootlooping. anything helps
Primal instinct said:
I originally was on android 5.1.1 cog5 build for sprint...then went to cm 12.1 remix by sabermod....when i used odin to flash back to original firmware, it kept bootlooping. anything helps
Click to expand...
Click to collapse
Trying going back to a 5.0.1 firmware
N910PVPU3BOF5 ( I pulled that from N910P) Didn't remember Sprint model number.
So if I'm wrong find the correct model of sammobile and download 5.0.1.
See what that does. Bootloader should not be locked so it should be possible,
Primal instinct said:
I originally was on android 5.1.1 cog5 build for sprint...then went to cm 12.1 remix by sabermod....when i used odin to flash back to original firmware, it kept bootlooping. anything helps
Click to expand...
Click to collapse
what version where you trying to get back?? if its lower 5.1.1 it might be impossible for now since the new bootloader wont let you downgrade,, if not just try wipe cache and factory reset
kerbiii said:
what version where you trying to get back?? if its lower 5.1.1 it might be impossible for now since the new bootloader wont let you downgrade,, if not just try wipe cache and factory reset
Click to expand...
Click to collapse
I was on the correct firmware. but for some reason even if I use odin to flash newer firmware coj6 it still doesn't boot up.
kerbiii said:
what version where you trying to get back?? if its lower 5.1.1 it might be impossible for now since the new bootloader wont let you downgrade,, if not just try wipe cache and factory reset
Click to expand...
Click to collapse
update: i can use cyanogenmod for a few minutes but then it shuts off again. my sprint sim card is not readable which is wierd since its a sprint rom cog5 baseband. any ideas :crying::crying:
deroyabun said:
You flashed a custom rom?
well did you check the bootloader and modem?
example: your old firmwara was based on a coh4 and the new custom is based on coj3.. then you get bootloops.
In this case please download the fitting bl & modem to your rom!
Click to expand...
Click to collapse
i downloaded and installed the correct bootloader and modem but still no bueno. i got cyanogenmod for trltespr to work and boot up but sim card not readable and it shuts down after a few minutes. thats really wierd considering its a sprint based rom. any ideas
I having a similar issue for a few months now. Nobody seems to have a clear answer. I am not a noob and have flashed back to factory a million times on other phones.. I have spent hours trying everything with no luck. Sprint store will not help... pretty frustrating. Let me know if you find a solution.
Have you tried a new battery yet?
Sent from my iPhone using Tapatalk
amongunz said:
I having a similar issue for a few months now. Nobody seems to have a clear answer. I am not a noob and have flashed back to factory a million times on other phones.. I have spent hours trying everything with no luck. Sprint store will not help... pretty frustrating. Let me know if you find a solution.
Click to expand...
Click to collapse
me too, i also have a bootloop for a couple of months now. tried literally every single combination of bootloaders/modems/kernels/ROMs . i can't even get into recovery, but can get into download mode.
do you guys think trying another battery may seriously help? how could a new battery help getting out of a bootloop if download and/or recovery mode work fine?
I don't think another battery will do anything. I think it is all software. I can flash CM11 btw, so you should try that. But my system is extremely unstable... it works... but is beyond frustrating. my smart watch wont work.. have to restart phone throughout day.... so many problems I cant even list them all.
---------- Post added at 08:29 PM ---------- Previous post was at 08:28 PM ----------
Chasef254 said:
Have you tried a new battery yet?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
A battery? How in the world would that help? That makes no sense... no offense, just sounds like you are asking someone to unnecessarily to spend $$$ when it is clearly software.
I'm having the same problems and want to know if op has tried it so I'll know if it's been ruled out of the problem thats why. Ok so it's software. You have the solution. No offense.
Sent from my iPhone using Tapatalk
d0p3t said:
me too, i also have a bootloop for a couple of months now. tried literally every single combination of bootloaders/modems/kernels/ROMs . i can't even get into recovery, but can get into download mode.
do you guys think trying another battery may seriously help? how could a new battery help getting out of a bootloop if download and/or recovery mode work fine?
Click to expand...
Click to collapse
I think this is a samsung issue. I am going to try and see if i can replace motherboard bc thats the only logical option. I can remarkably download and run (for a few minutes) cm12.1 but my sprint sim card is unrecognized (wierdly). I dont think its the modem or bootloader....ill update yall if i find a fix. Thanks P.I
amongunz said:
I having a similar issue for a few months now. Nobody seems to have a clear answer. I am not a noob and have flashed back to factory a million times on other phones.. I have spent hours trying everything with no luck. Sprint store will not help... pretty frustrating. Let me know if you find a solution.
Click to expand...
Click to collapse
The only solution i can find is to replace the motherboard or replace phone all together.
Primal instinct said:
I think this is a samsung issue. I am going to try and see if i can replace motherboard bc thats the only logical option. I can remarkably download and run (for a few minutes) cm12.1 but my sprint sim card is unrecognized (wierdly). I dont think its the modem or bootloader....ill update yall if i find a fix. Thanks P.I
Click to expand...
Click to collapse
Were you able to get it fixed? I'm probably going to go to a phonerepair shop this weekend or next week and see what they say or can do.
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Okay so here is what fixed it for anyone else like me that is a noob, and does dumb stuff to their phone. You cant roll back to old firmwares. You have to flash to the latest firmware that was on the phone or newer. I found the updated firmware and its good to go.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
Many thanks to koop1955 for his help, and thanks to everyone that jumped in to help a poor noob.
Demijinx said:
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Click to expand...
Click to collapse
Anybody? Literally ANY idea is worth a shot at this point.
Did you use Odin to root the device? What options did you set?
Zoolok said:
Did you use Odin to root the device? What options did you set?
Click to expand...
Click to collapse
Thanks for the reply Zooklok, I did use Odin, and I didnt change any settings.
So checked boxes under options are;
Auto Reboot
F. Reset Time
Thats all. I clicked "AP" to load the firmware, then clicked start.
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
selferng said:
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
Click to expand...
Click to collapse
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Demijinx said:
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Click to expand...
Click to collapse
Can u use the hardware button to select? Volume up and down and power button to select
selferng said:
Can u use the hardware button to select? Volume up and down and power button to select
Click to expand...
Click to collapse
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Demijinx said:
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Click to expand...
Click to collapse
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
nms247 said:
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Click to expand...
Click to collapse
Its the regular S6, not the edge. So the firmware is correct?
a. felon said:
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
Click to expand...
Click to collapse
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
B3311 said:
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
Click to expand...
Click to collapse
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
UPDATE! FIXED IT!
I tried a different root method
http://trueandroid.com/g920pvpu2bof...mware-sprint-galaxy-s6-sm-g920p-how-to-guide/
This worked the first time, and restored the touchscreen functions. Thank you everyone for your help.
Demijinx said:
Its the regular S6, not the edge. So the firmware is correct?
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
Click to expand...
Click to collapse
Had to ask this being the edge+ forum
Sent from my SM-G928F using Tapatalk
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Demijinx said:
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Click to expand...
Click to collapse
Ok I know one thing for sure, you are not the first to face this but it seems to be solved by flashing the tar file for your device. More info here http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Good luck
Don't forget to Press that thanks button ?.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Demijinx said:
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Click to expand...
Click to collapse
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
koop1955 said:
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
Click to expand...
Click to collapse
Will do brother. Thank you so much, you really pulled me out of a spot. Im used to paying for everything in "Military Currency". Thank you again.
it was working fine !!!
tried to flash custom rom and then it acting too much weird now
for example if I want to switch off phone then ,
I have to touch in top (where status bar is located) area of the screen in order to click on "Power Off" text (which is in the middle of the screen) !!!
same case with every other touch
can anyone help me ???
@rasik107
If it worked before custom ROM, best to restore stock firmware and test your touchscreen.
A_H_E said:
@rasik107
If it worked before custom ROM, best to restore stock firmware and test your touchscreen.
Click to expand...
Click to collapse
yup , I flashed O rom 2-3 times still issue was there !!!
then , I flashed official N rom , n its working perfect now
same problem here on lineage or aokp rom
also have such issue i try calibirate it with service meny not work connect mouse
flash custom kernel
rasik107 said:
yup , I flashed O rom 2-3 times still issue was there !!!
then , I flashed official N rom , n its working perfect now
Click to expand...
Click to collapse
I have same problem with the touchscreen and fixed with official N Rom.
Did you try flash another custom rom again? Is it still happen?
packpunk said:
I have same problem with the touchscreen and fixed with official N Rom.
Did you try flash another custom rom again? Is it still happen?
Click to expand...
Click to collapse
my touch was faulty !
rasik107 said:
my touch was faulty !
Click to expand...
Click to collapse
Is there another way to use a custom ROM?
Same problem here.
Booted TWRP 3.2.3 off twrp site via fastboot boot twrp.img, phone got stuck, after poweroff-poweron touch sensor calibration was off.
Flashed original firmware, relocked - no go.
It's also hosed in TWRP, so not a firmware bug.
Can someone with a working Mi A1 dump all their partitions from twrp (adb pull /dev/block/bootdevice/by-name) and share privately as i hope touch sensor calibration data was stored somewhere and was damaged by the twrp?
andlommy said:
Can someone with a working Mi A1 dump all their partitions from twrp (adb pull /dev/block/bootdevice/by-name) and share privately as i hope touch sensor calibration data was stored somewhere and was damaged by the twrp?
Click to expand...
Click to collapse
I got the dump from someone with working TS and it didn't help on my device.
From dmesg in twrp I've noticed that my TS firmware was 0x0a version while working device shows 0x10, flashing stock tissot_images_7.12.19_20171219.0000.00_7.1_d39fa89 aaf.tgz helped in the end and TS fw got upgraded to 0x0a as shown in my dmesg after first boot.
Now I'm going to restore my emmc dump (to restore my imei and MACs) and will try to reflash this again.
JaMa2nd said:
I got the dump from someone with working TS and it didn't help on my device.
From dmesg in twrp I've noticed that my TS firmware was 0x0a version while working device shows 0x10, flashing stock tissot_images_7.12.19_20171219.0000.00_7.1_d39fa89 aaf.tgz helped in the end and TS fw got upgraded to 0x0a as shown in my dmesg after first boot.
Now I'm going to restore my emmc dump (to restore my imei and MACs) and will try to reflash this again.
Click to expand...
Click to collapse
Solved by installing an old version of stock miui through mi flash tool. Old as in android 7, not 8, be careful to check version when downloading from miui site.