How Install new Rom and Recovery in Huawei Y625?
Hello everyone.
I just bought a Huawei Y625. I have root already, but I wanted to install a custom ROM and Recovery.
I'm a little lost because I can not find any information.
From already thank you all.
Intall Lollipop Huawei y625
Help me
Lollipop for huawei ascend y625-u51
Help me. I wanna a ROM to update huawei y625-u51 to lollipop
Wellington Britto said:
How Install new Rom and Recovery in Huawei Y625?
Hello everyone.
I just bought a Huawei Y625. I have root already, but I wanted to install a custom ROM and Recovery.
I'm a little lost because I can not find any information.
From already thank you all.
Click to expand...
Click to collapse
I did some google and didn't find any rom for your device, so now you either have to wait for someone to make one or have make one by yourself
Help to compile Huawei Y625 CWM or TWRP
Hello there! I am new to this, I have been reading and trying to compile a recovery for my Huawei Y625-U03, I hope that my work can help other users with the same model and those who are compiling other variants. The truth is I don't know much about porting... I can compile a recovery.img and probe but I get error with dt.img... however generates a recovery.img without dt. I've been tested importing the file (dt) from the stock rom, run well (with CWM theme, and touch) but I have the same options of the stock recovery ... any programmer could help me? Greetings from Venezuela
recovery
nando161982 said:
Hello there! I am new to this, I have been reading and trying to compile a recovery for my Huawei Y625-U03, I hope that my work can help other users with the same model and those who are compiling other variants. The truth is I don't know much about porting... I can compile a recovery.img and probe but I get error with dt.img... however generates a recovery.img without dt. I've been tested importing the file (dt) from the stock rom, run well (with CWM theme, and touch) but I have the same options of the stock recovery ... any programmer could help me? Greetings from Venezuela
Click to expand...
Click to collapse
saludos amigo, has logrado cambiarle el recovery que trae por defecto? es decir ponerle uno diferente. aca te dejo mi #+584166274046
23deenero said:
saludos amigo, has logrado cambiarle el recovery que trae por defecto? es decir ponerle uno diferente. aca te dejo mi #+584166274046
Click to expand...
Click to collapse
Pues aun nada que funcione al 100%
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
AkaruiTenshi said:
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
Click to expand...
Click to collapse
I am new at this. How do you install this image? Can you please direct me to where to look for a how to. Thank you.
First of all, you will need to install abd and fastboot drivers if you're on a windows pc, if you use linux, just install abd and fastboot packages and dependencies for your distro.
Connect the phone in the computer using an usb cable, and activate the debug in the phone
Next step, on windows open the command line... In linux, just open the terminal
Now call the abd, just type this (whitout quotes): "abd -start-server"
Wait a little bit, in your phone will apear a mensage to validare the abd acess to the phone, just say yes...
Again in the terminal or command line, type: "abd reboot bootloader"
(do not wait until the phone reboot) type "fastboot boot recovery.img"
After this, the twrp will boot in your phone, without installation (if you install the twrp, your warranty is void), you can use twrp for backup your stock rom for exemple... If you want to install the twrp, just change the last comand to: "fastboot flash recovery recovery.img"
Sorry for the bad english... But i hope that this kind of turorial could help you
Best regards
twrp
im using huawei y625-u32.. ..can install twrp in this device
Follow my kind of tuturial to boot twrp, without instalation... The u51 variant of the Y625 model has the bootloader unlocked from factory. The u32 variant maybe it's unlocked too, try and then reply here... Best regards
hi
Please upload the huawei y625 recovery image ,is it possible to install TWRP recovery on this phone ,i rooted phone with Kingoroot .
---------- Post added at 07:02 PM ---------- Previous post was at 06:29 PM ----------
AkaruiTenshi said:
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
Click to expand...
Click to collapse
link not working ,can You upload the huawei y625.img file ?
thanks..
The Huawei Y625 have 4GB internal storage ,than its usable 1,87GB ...Here is solution to maximize internal storage on y625:
1.download for Pc kingoroot and after instal root the phone(after this step You lose guaranty.
2.buy some Sd memory card 32gb class 10
3.download Partition manager for Pc,then with Partition manager format Sd card and create 2partition ,first one is extended and format it with EXT4 standard(this will be yours internal storage),the second partition will be Primary Fat32 standard...i was partitioned EXT4 size 9Gb the rest is fat32.
3 download from internet Apps2SD aplication...than create script and link all new instalations to EXT4(if you dont know how search solution on youtube
And voila you have 8gb internal storage...
If you need help contact me
here is a working TWRP I installed for myself and I can confirm it works the link : https://mega.nz/#!X9s3CCLQ!JhC1sJ0MwGsCfQJ7Frs7sI7MfGURo2PjAhESCeS-SDI
credits go to guy on youtube called The Best .. got it from him .. and for installation install it via Fastboot .. u can search tutorials
Link
AkaruiTenshi said:
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
Click to expand...
Click to collapse
The link you provide its offline. Do you have another link???
bula1ca said:
I am new at this. How do you install this image? Can you please direct me to where to look for a how to. Thank you.
Click to expand...
Click to collapse
get flashify.apk or mobile uncle.apk
flashify --install--recovery img--select--flash
Dark Knight Begins said:
get flashify.apk or mobile uncle.apk
flashify --install--recovery img--select--flash
Click to expand...
Click to collapse
Thank you.
bula1ca said:
Thank you.
Click to expand...
Click to collapse
hitting the thanks button insted helps me a lot.
Hi!! it's possible return to recovery stock?? I accidentally delete the system partition, and i don't know how recover it. Please, any help is welcome.
sorry for my bad english
Related
Unlock network of your ZTE Blade Q Maxi, Orange Reyo.....
To unlock your phone you should know to use SPFlashTool
must have a backup flashable with SPFlashTool of stok rom or a custom rom
you can make it with MTKDroidTools(if you dont have allready)
phone drivers must be installed
after unlocked should must rewrited the IMEI with MTKDroidTool every time you change the rom
or use via code method, can get the code in sevice for some money
you do it on your risk
you will loose the warranty
1)charge the phone at least 50%(100% is better)
2)turn off the phone
3)start the SPFlashTool, press "Format"from interface
4)chec the "formatt all flash"
5)press "Format"button and conect the phone
the format process will start(if the drivers are installed properly the process wil start without err)
when it finish you will get green OK, disconect the phone and pull out the battery to stop it to boot, then put back the battery and keep it OFF
6)press the "Download" from interface
7)sellect the Android_scatter of your backup and it will be loaded automatical with all files from backup
8)press "Download" button and conect the phone
the download process will start and the phone will be flashed with your backup
when it finish, the green OK will apear and the phone will start
if it is stuck in boot, pull out the battery, put back the battery and start the phone in recovery and doo a "wipe data factory reset"
and then reboot the phone
now your phone should be unlocked
Enjoy
Ps. i re edit this thread with a new method for unlock
that method work for ZTE Blade Q Maxi and it shoudl work for Blade Q and Blade Q Mini
Will this allow the instalation and booting of custom roms as well or just the network lock?
ohgodwhy said:
Will this allow the instalation and booting of custom roms as well or just the network lock?
Click to expand...
Click to collapse
i booted o custom rom on ZTE Q Maxi with original lk.bin file and with this new too but are not full working untill now.
it not read the internal or external sdcard, no sound on speaker, just on head set
i will post it here later to get some help if i cant fix it
so untill now this lk.bin file unlock only the network on the phone
Trimis de pe al meu ZTE Blade Q Maxi
vaserbanix said:
i booted o custom rom on ZTE Q Maxi with original lk.bin file and with this new too but are not full working untill now.
it not read the internal or external sdcard, no sound on speaker, just on head set
i will post it here later to get some help if i cant fix it
so untill now this lk.bin file unlock only the network on the phone
Trimis de pe al meu ZTE Blade Q Maxi
Click to expand...
Click to collapse
Hi neighbor,...will this zip work on Q ???
pustinjak said:
Hi neighbor,...will this zip work on Q ???
Click to expand...
Click to collapse
yes will work
but i recomend you to replace the lk.bin file with one from Q not Q Maxi
find an stock rom from a virgin Q not branded and replace it
Trimis de pe al meu ZTE Blade Q Maxi
Hi ....
Doesn't work on my Reyo...
Android version 4.2.2
Baseband version MOLY.WR8.W1315.MD.WG.MP.V1.P13, 2013/10/31 16:48
Kernel version 3.4.5
Build number ORO_RO_P172D10_V3.3
radu.timbus said:
Doesn't work on my Reyo...
Android version 4.2.2
Baseband version MOLY.WR8.W1315.MD.WG.MP.V1.P13, 2013/10/31 16:48
Kernel version 3.4.5
Build number ORO_RO_P172D10_V3.3
Click to expand...
Click to collapse
What version you use?
Spflastool or CWM
SPFlashtool
No errors, all ok but still locked.....
vaserbanix said:
What version you use?
Spflastool or CWM
Click to expand...
Click to collapse
radu.timbus said:
No errors, all ok but still locked.....
Click to expand...
Click to collapse
You dont answer to my question.
SPFlashtool
SPFlashTool
It sais ol ok....but still locked.
Thx.
vaserbanix said:
You dont answer to my question.
Click to expand...
Click to collapse
radu.timbus said:
SPFlashTool
It sais ol ok....but still locked.
Thx.
Click to expand...
Click to collapse
Something is wrong!
I allredy have 3-4 confirmation + my phone.
You used spflash tool wich is in archive or else
....
I try again right now ....
I'll let you know in a few minutes.
vaserbanix said:
Something is wrong!
I allredy have 3-4 confirmation + my phone.
You used spflash tool wich is in archive or else
Click to expand...
Click to collapse
---------- Post added at 10:24 AM ---------- Previous post was at 10:11 AM ----------
No joke....
It doesn't work.....
I used exactly the archive.... and still network locked.....
thx.
radu.timbus said:
I try again right now ....
I'll let you know in a few minutes.
Click to expand...
Click to collapse
hi...
I managed to install CWM ans S3 version you provided.... THX for that!!!!
Still locked....
And now it sais "sim card slot permanently locked"....
radu.timbus said:
I managed to install CWM ans S3 version you provided.... THX for that!!!!
Still locked....
And now it sais "sim card slot permanently locked"....
Click to expand...
Click to collapse
Did you read my PM?
vaserbanix said:
Unlock network of your ZTE Blade Q Maxi, Orange Reyo.....
I prepare 2 ways to do this:
1) via SPFlash_tool
2)via CWM custom recovery
First of all chek if your phone is loked by your network provider
1) Download the archive;
it have SPFlash_tool, scatter and the lk.bin file
-extract the archive where you want
-start SPFlash_tool, sellect the scatter file, chek UBOOT(if is not allready cheked) and select the lk.bin file
-click Download, conect the phone in off mode and the process should start( if not start press vol up and power untill the process start)
when it finish deconect the phone and reboot it
you should have now an unlocked phone
2)Download the patch atached
copy it on the sdcard
reboot the phone in recovery CWM custom (not stok)
-install zip from sdcard/ chose zip/(select the patch)/ yes install
when it finish reboot the phone
and you should have an unlocked phone
Enjoy
Click to expand...
Click to collapse
I have managed to generate unlock codes for two zte blade q minis, if some one fancy to test free unlock codes please pm and report results.
xorti said:
I have managed to generate unlock codes for two zte blade q minis, if some one fancy to test free unlock codes please pm and report results.
Click to expand...
Click to collapse
Hello,
I have try your methode on a Startrail 4 (ZTE Q).
I was just a recommendation to change the file so I have try with you Zip file in recovery but now the phone constantly reboot on the boot logo...
Any idea on how to unbrick ?
Thank you.
-JFK- said:
Hello,
I have try your methode on a Startrail 4 (ZTE Q).
I was just a recommendation to change the file so I have try with you Zip file in recovery but now the phone constantly reboot on the boot logo...
Any idea on how to unbrick ?
Thank you.
Click to expand...
Click to collapse
Replace the lk.bin file with one for Blade Q in the archive and flash again.
Or flash with spflashtool a lk.bin file from your stock rom
Trimis de pe al meu Blade Q Maxi
vaserbanix said:
Replace the lk.bin file with one for Blade Q in the archive and flash again.
Or flash with spflashtool a lk.bin file from your stock rom
Trimis de pe al meu Blade Q Maxi
Click to expand...
Click to collapse
Where is located the lk.bin file ?
Thank you.
OK, I got it, how should I turn the phone to flash it ? Currently, I have no boot at all, can't enter recovery.
same here...did the cwm method..and not working on orange reyo .still network locked
brag288 said:
same here...did the cwm method..and not working on orange reyo .still network locked
Click to expand...
Click to collapse
if this methods doesnt work, you have to format the phone with SPflashTool and reflash a full backup with the same SPFlashTool.
i unlocked my phone with this method and it work, cant understand whay it doesnt work on all phones.
So i made an Files_to_Flashtool for each rom i ported Miui and Samsung_Note3 + one of the stok rom but modified.
i will post each one in its section
thats could be used for restoring a bricked phone too
atention is for Blade Q Maxi only
Hi guys! Sorry in advance for my bad English...
I recently bought ZTE Blade L2 and root it(SuperSU) with framaroot. Yesterday I downloaded Chainfire3D( http://forum.xda-developers.com/showthread.php?t=1087427 ) app from Google Play and after I installed the OpenGL driver from the app, the phone doesn't want to boot up :crying:
Luckyly i have .backup file in dropbox but I can't download it to the internal memory of the phone which btw is running with stock recovery and can't restore user data from file loaded in SD card.
Could you point me some ideas for installing CWM/TWRP from stock recovery mode? Or maybe updating stock OS(Android 4.2.2) with Update.zip file?
Phone Specs: http://www.gsmarena.com/zte_blade_l2-6367.php
Funtast said:
Hi guys! Sorry in advance for my bad English...
I recently bought ZTE Blade L2 and root it(SuperSU) with framaroot. Yesterday I downloaded Chainfire3D( www.forum.xda-developers.com/showthread.php?t=1087427 ) app from Google Play and after I installed the OpenGL driver from the app, the phone doesn't want to boot up :crying:
Luckyly i have .backup file in dropbox but I can't download it to the internal memory of the phone which btw is running with stock recovery and can't restore user data from file loaded in SD card.
Could you point me some ideas for installing CWM/TWRP from stock recovery mode? Or maybe updating stock OS(Android 4.2.2) with Update.zip file?
Phone Specs: http://www.gsmarena.com/zte_blade_l2-6367.php
Click to expand...
Click to collapse
Too bad, you should never ever play hardcore with your phone unless you have a custom recovery AND a backup of the phone. I don't have this phone but I'm pretty sure there is a facebook group that shares info about it and might be able to help you.
urmanio23 said:
Too bad, you should never ever play hardcore with your phone unless you have a custom recovery AND a backup of the phone. I don't have this phone but I'm pretty sure there is a facebook group that shares info about it and might be able to help you.
Click to expand...
Click to collapse
Hi,
I've bricked my Zte Blade L2...OMG!!!!
My instructions for "revive" phone:
Download lastest firmware por Zte Blade L2 from here:
http://www.ztedevices.com/support/smart_phone/7f1db0c8-0737-419a-a4e5-038d32a43f88.html
Well...when you've download, unzip this file wherever you like it.
Search in Google ADB FASTBOOT and look for Adb + Fastboot installer from this forum, download and install it.
Next step, Copy the Unzipped file to ADB folder (in root c
Ok, now Power Off Phone...and press Power + Volume Up and now...Recovery Menu appears...YEAHHH!!!!....here (in CWM or Official Recovery is the same), select Wipe Cache and Wipe data/user...next...
SELECT UPDATE FROM ADB...
Connect ZTE Blade L2 to PC... (Here install the driver, look at final tutorial)...
In Windows...Start Menu...Run...and type CMD and OK!
In DOS BOX (black box)...type:
cd\ (and intro)
cd adb (and intro)
adb sideload xxx.zip (where XXX is the Unzipped file!!!) clic Intro...and wait for 5 min aprox...reboot Phone...and voila!!!!
Installing ADB Drivers for this **** Smartphone...
When we connect Zte Blade L2 to PC in Update Zip from ADB...
In windows...clic (right button mouse) on Computer, select Manage...
Then select Device Manager, clic (right click) on Unreconigzed device --> Select Update --> Select Search driver in my computer --> Select from Device List...here select Yunos Acb or Adb Driver and Next until Finish...
PD: Sorry for my English...i'm Spanish...LoL!
PD2: ONE THING! The firmware for ZTE Blade L2 is MULTILINGUAL!!!
See u...
hi...
Funtast said:
Hi guys! Sorry in advance for my bad English...
I recently bought ZTE Blade L2 and root it(SuperSU) with framaroot. Yesterday I downloaded Chainfire3D( http://forum.xda-developers.com/showthread.php?t=1087427 ) app from Google Play and after I installed the OpenGL driver from the app, the phone doesn't want to boot up :crying:
Luckyly i have .backup file in dropbox but I can't download it to the internal memory of the phone which btw is running with stock recovery and can't restore user data from file loaded in SD card.
Could you point me some ideas for installing CWM/TWRP from stock recovery mode? Or maybe updating stock OS(Android 4.2.2) with Update.zip file?
Phone Specs: http://www.gsmarena.com/zte_blade_l2-6367.php
Click to expand...
Click to collapse
hi...would you mind sharing me your .backup file?....I flashed MIUI rom on my L2 but I forgot to backup my nvram,MIUI rom is great but I lost my 3G connection...I downloaded the stock firmware from the zte site but It fails when I flashing it...I don't have much idea about this and I don't know what to do now so I'm thinking maybe restoring a backup file would work...Thanks in advance
eochi18jhae said:
hi...would you mind sharing me your .backup file?....I flashed MIUI rom on my L2 but I forgot to backup my nvram,MIUI rom is great but I lost my 3G connection...I downloaded the stock firmware from the zte site but It fails when I flashing it...I don't have much idea about this and I don't know what to do now so I'm thinking maybe restoring a backup file would work...Thanks in advance
Click to expand...
Click to collapse
Hi,
did you backup your previous rom?I use Carliv Touch recovery and found that if i restored a backup made with that recovery,it restored everything including nvram
problem solved...
Andalitez said:
Hi,
did you backup your previous rom?I use Carliv Touch recovery and found that if i restored a backup made with that recovery,it restored everything including nvram
Click to expand...
Click to collapse
Thanks bro but problem already solved...I found a thread in MIUI india's site about porting MIUI rom to mediatek devices so I followed every instruction and it's a success...
Hola NeO2K1 , he hecho todo lo que dices paso por paso pero cuando el telefono empieza a instalar el update me sale lo siguiente:
assert failed: getprop("ro.product.device") == "P182A10" || getprop( ro.build.product") == "P182A10"
E:Error in /tmp/update.zip
(Status 7)
Instalation aborted.
Sabes que puede pasar?
if u are from latin america you need firware from that region
asolisi said:
Hola NeO2K1 , he hecho todo lo que dices paso por paso pero cuando el telefono empieza a instalar el update me sale lo siguiente:
assert failed: getprop("ro.product.device") == "P182A10" || getprop( ro.build.product") == "P182A10"
E:Error in /tmp/update.zip
(Status 7)
Instalation aborted.
Sabes que puede pasar?
Click to expand...
Click to collapse
If u are latin american u need to download a firmware from there, i downloaded firmware from argentina and installed successfully on blade l2 from mexico, with that spanish fimware from the other memeber i got the same error like you maybe from region or version of basebands. cheers
eochi18jhae said:
Thanks bro but problem already solved...I found a thread in MIUI india's site about porting MIUI rom to mediatek devices so I followed every instruction and it's a success...
Click to expand...
Click to collapse
Cold you send me your miui rom? I have got the same problem
hi
hola
NeO2K1 e seguido tus pasos pero me da un error al momento de la instalación
set_perm: some changes failed
installation aborted.
e usado la rom perteneciente a mi pais chile.
que puedo hacer?:crying:
To all with the blade l2 I have the cwm and stock recoveries just email me and I will send you it
Tell me you're problem withe the blade l2 at. [email protected]
helpppppp
On zte site there is no rom for my country, only pdf user guide, can i download rom for another country? Please help me :crying:
NeO2K1 said:
Hi,
I've bricked my Zte Blade L2...OMG!!!!
My instructions for "revive" phone:
Download lastest firmware por Zte Blade L2 from here:
http://www.ztedevices.com/support/smart_phone/7f1db0c8-0737-419a-a4e5-038d32a43f88.html
Well...when you've download, unzip this file wherever you like it.
Search in Google ADB FASTBOOT and look for Adb + Fastboot installer from this forum, download and install it.
Next step, Copy the Unzipped file to ADB folder (in root c
Ok, now Power Off Phone...and press Power + Volume Up and now...Recovery Menu appears...YEAHHH!!!!....here (in CWM or Official Recovery is the same), select Wipe Cache and Wipe data/user...next...
SELECT UPDATE FROM ADB...
Connect ZTE Blade L2 to PC... (Here install the driver, look at final tutorial)...
In Windows...Start Menu...Run...and type CMD and OK!
In DOS BOX (black box)...type:
cd\ (and intro)
cd adb (and intro)
adb sideload xxx.zip (where XXX is the Unzipped file!!!) clic Intro...and wait for 5 min aprox...reboot Phone...and voila!!!!
Installing ADB Drivers for this **** Smartphone...
When we connect Zte Blade L2 to PC in Update Zip from ADB...
In windows...clic (right button mouse) on Computer, select Manage...
Then select Device Manager, clic (right click) on Unreconigzed device --> Select Update --> Select Search driver in my computer --> Select from Device List...here select Yunos Acb or Adb Driver and Next until Finish...
PD: Sorry for my English...i'm Spanish...LoL!
PD2: ONE THING! The firmware for ZTE Blade L2 is MULTILINGUAL!!!
See u...
Click to expand...
Click to collapse
I know i am necroing a thread, but i really need your help. I am from Serbia, and i've been trying to unbrick it,but serbia doesnt have stock rom on the website, i tried many other roms but i still get the same. I get it to adb sideload,it loads the file,but nothing happens. I cant take the phone out of sideload because i dont have a custom recovery, and when i try to flash a custom recovery woth fastboot i get thet the recovery partition can't be flashed. I also tried to do fastboot update update.zip but i get this msg
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Any help would be appreciated
some help
Mokin said:
I know i am necroing a thread, but i really need your help. I am from Serbia, and i've been trying to unbrick it,but serbia doesnt have stock rom on the website, i tried many other roms but i still get the same. I get it to adb sideload,it loads the file,but nothing happens. I cant take the phone out of sideload because i dont have a custom recovery, and when i try to flash a custom recovery woth fastboot i get thet the recovery partition can't be flashed. I also tried to do fastboot update update.zip but i get this msg
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Any help would be appreciated
Click to expand...
Click to collapse
Email me at [email protected] I have experience with this phone
ishaqdroid said:
Email me at [email protected] I have experience with this phone
Click to expand...
Click to collapse
thanks mate,but i sorted it out
Hi @Mokin
Could you tell me how did you do to unbrick your ZTE please?
thank you!
error flashing stock rom
i got an error flashing the stock rom from zte blade l2
Install /sdcard2
Error: Invalid partition settings
15: expdb 4300000:3980000
instalation abort
please help me with this
My problem is that the phone has the stock recovery and won't let me install the stock rom (update.zip) give this error every time "script aborted no error message installation aborted" and i can't use flashtool because the charger flex is broken...
My question is, why don't let me install from revovery? Is that a indication that the memory (emmc) is KO?
I dont wan't buy the flex because i think the phone is alredy dead...
Yes and Hello,
to keep things simple made a working CtR 6 recovery for the zte blade l110 on speadtrum basis
ok, simple two easy flashable .img files,
-one the ctr 6 custom touch recovery
DOWNLOAD:
https://www1.zippyshare.com/v/kXBfDA43/file.html
plus if you feel like a recovery filemanager just put it on sdcard or userdata
https://www115.zippyshare.com/v/aV9LR32z/file.html
- second the backup of stock original recovery in case of whatever caused it not to work
DOWNLOAD:
http://s000.tinyupload.com/?file_id=87966360478211256638
easy usable .img files flashable via
fastboot,
recovery?,
shell dd if=/root/recovery.img of=/dev/block/mmcblk0p22
just in case here are the classic toold adb,fastboot...
http://s000.tinyupload.com/?file_id=00162299023334251441
questions or other? thx to the original recovery compiler and coder , just was adding the blade l110 custom parts
btw still maybe doing small changes and soon upload a even little bit better scnd. version
have fun, leave comments
I'm very interested in testing it.
Did you already find host?
How about zippyshare.com?
zte blade l110 recovery
take a look now try and tell me things ok found a good host i hope
g2zer0 said:
I'm very interested in testing it.
Did you already find host?
How about zippyshare.com?
Click to expand...
Click to collapse
Just flashed it with flashify and it works perfect.
Big thx to you!
Reupload pls
fenerbuuh said:
Reupload pls
Click to expand...
Click to collapse
give it another try should be working now a little time
i flashed the recovery.img file inside the zip through fastboot, didn't work. Then i flashed through terminal with the given command and didn't work either. When i reboot to recovery after the flash, the screen remains black and boots normal. Please upload to zippyshare the backup, as the previous link is broken :/
eduardvi995 said:
i flashed the recovery.img file inside the zip through fastboot, didn't work. Then i flashed through terminal with the given command and didn't work either. When i reboot to recovery after the flash, the screen remains black and boots normal. Please upload to zippyshare the backup, as the previous link is broken :/
Click to expand...
Click to collapse
Oh
I forgot to mention something REALLY important that i didn't notice. :silly:
I flashed your custom recovery for the SINGLE sim Zte Blade l110 version. And this is for the DUAL sim version.I realize it was my mistake, thanks anyway for the effort. :fingers-crossed:
So everyone be AWARE that this recovery won't work with SINGLE sim version.
hi, do i need to unlock bootloader to flash this recovery?
Kabdii said:
hi, do i need to unlock bootloader to flash this recovery?
Click to expand...
Click to collapse
this oem has the bootloader unlocked. all what you would need to do is root it in order to flash anything. (or you could just flash through fastboot).
grazie
salve potete rimettere il link secondo il backup del recupero originale di stock in caso di qualunque cosa gli abbia impedito di funzionare
Hey guys, how are you? So, let me explain my situation - I have a Redmi 7A (the 16 GB version) and I recently unlocked its bootloader to root, and uninstall some bloatwares ...... I managed to unlock the bootloader and install TWRP recovery, but I was unable to root, and i tried in a lot of ways, in a lot of times........... I'm on version 11.0.6 of MIUI, and I saw that some users here were having problems with this version too. Anyway, recently a MIUI update came out, and soon it will update to MIUI 12, but I'm not able to install the OTA update, after the phone restarts, it goes to TWRP recovery and shows an error message - so, I would like to go back to my original recovery and re-lock my bootloader, but for that I need the original recovery of the Redmi 7A, and I can't find it anywhere........
Someone here have this original recovery available to send or do upload? It would help me a lot! Thanks
eriksparks1 said:
Hey guys, how are you? So, let me explain my situation - I have a Redmi 7A (the 16 GB version) and I recently unlocked its bootloader to root, and uninstall some bloatwares ...... I managed to unlock the bootloader and install TWRP recovery, but I was unable to root, and i tried in a lot of ways, in a lot of times........... I'm on version 11.0.6 of MIUI, and I saw that some users here were having problems with this version too. Anyway, recently a MIUI update came out, and soon it will update to MIUI 12, but I'm not able to install the OTA update, after the phone restarts, it goes to TWRP recovery and shows an error message - so, I would like to go back to my original recovery and re-lock my bootloader, but for that I need the original recovery of the Redmi 7A, and I can't find it anywhere........
Someone here have this original recovery available to send or do upload? It would help me a lot! Thanks
Click to expand...
Click to collapse
I have detailed instructions - How to install TWRP + ROOT [Magisk] for redmi 7A HERE. Very easy. Please use google translate
sjcbank said:
I have detailed instructions - How to install TWRP + ROOT [Magisk] for redmi 7A HERE. Very easy. Please use google translate
Click to expand...
Click to collapse
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
eriksparks1 said:
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
Click to expand...
Click to collapse
If you can't do it, look down and read lesson #3, download ROM zip and txt files for flash via twrp. will definitely work 100%
eriksparks1 said:
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
Click to expand...
Click to collapse
Soo... I have problem too with root and I make temp root (unsafe method) . Patching boot img is idiot idea now , same as re-lock bootloader . I'm DEV and i'm know (look on my threads if you don't think). Better idea for you is download global rom or rom designed for your region . Actually i wipe my global rom and I install rom with android 10 . I have english only without polish support . All rom's is here : https://mirom.ezbox.idv.tw/en/phone/pine/ If you want to unbrick your device , download correct rom , and flash . For your bricked device is only fastboot rom for unbrick . In google you find how to install adb and fastboot drivers , disable check signatures of drivers in your windows , adb and fastboot exe file (if you have windows as me) etc. . Good luck . Disclaimer: After re-lock bootloader , your software and data be bricked , you must flash all with data too . Make copy of data to google or sd card
---------- Post added at 06:04 AM ---------- Previous post was at 05:58 AM ----------
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-7a-all-miui-firmwares/
---------- Post added at 06:15 AM ---------- Previous post was at 06:04 AM ----------
https://xiaomifirmwareupdater.com/miui/pine/
I am using oneOS custom rom and PitchBlack Recovery Project
recovery have very nice UI and working very smooth. its boot into recovery without fastboot command..
here is some picture how is looks like..
for those who want to try and flash just follow this instruction:
put your phone in fastbootbot mode
in adb type fastboot devices (you will see some number of your device)
then type flash fastboot recovery recovery.img ( or what name is your recovery .img file, it can be Pitchblackrecovery.img or etc...)
after that type fastboot boot recovery recovery.img or pitchblackricovery.img -it up to you how will rename you recovery.img file
and finally you will boot int recovery...
good luck and happy flashing....
this is the link of recovery for LMI devices ( POCO F2 Pro)
https://drive.google.com/file/d/1w0tx_8zuVLmX4svbn82eaZrUGMs_757P/view?usp=sharing
Hi,
Thanks for sharing [emoji6]
Envoyé de mon lmi en utilisant Tapatalk
Can you share a link to download please?
Is it 100% functional?
NOSS8 said:
Is it 100% functional?
Click to expand...
Click to collapse
The Russian on 4pda who made it claims it's fully functional except for the log errors which he claims " it does not affect functionality". I have used this for 3 days now and have yet to have a problem. although I don't use it avidly, I also use oneOS but am underway to changing to something more AOSP, ill update this post when I tried installing a rom with it.
EDIT: sideloading doesn't work and the errors are the same as mauro's twrp, probably based on such so they share the same bugs
are we obliged to unlock bootloader?
Hello,
Yes [emoji6]
Envoyé de mon lmi en utilisant Tapatalk
works pefect! thank u very much!
tze_vitamin said:
I am using oneOS custom rom and PitchBlack Recovery Project
recovery have very nice UI and working very smooth. its boot into recovery without fastboot command..
here is some picture how is looks like..
for those who want to try and flash just follow this instruction:
put your phone in fastbootbot mode
in adb type fastboot devices (you will see some number of your device)
then type flash fastboot recovery recovery.img ( or what name is your recovery .img file, it can be Pitchblackrecovery.img or etc...)
after that type fastboot boot recovery recovery.img or pitchblackricovery.img -it up to you how will rename you recovery.img file
and finally you will boot int recovery...
good luck and happy flashing....
this is the link of recovery for LMI devices ( POCO F2 Pro)
https://drive.google.com/file/d/1w0tx_8zuVLmX4svbn82eaZrUGMs_757P/view?usp=sharing
Click to expand...
Click to collapse
lndiana said:
Can you share a link to download please?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1w0tx_8zuVLmX4svbn82eaZrUGMs_757P/view?usp=sharing
flash fastboot recovery recovery.img
The link doesn't work...
Nice but nobody is asking where tha hell does this come from ? XDA thread ? Telegram Channel ? Who's the dev ? Yo com'on and if he wanted to share his work I think he would already send a link here on XDA
kkosnuss said:
Nice but nobody is asking where tha hell does this come from ? XDA thread ? Telegram Channel ? Who's the dev ? Yo com'on and if he wanted to share his work I think he would already send a link here on XDA
Click to expand...
Click to collapse
Just read page 1.
12th November 2020, 03:39 AM |#5
Senior Member
229 posts
Thanks Meter: 108
More
Quote:
Originally Posted by NOSS8
Is it 100% functional?
The Russian on 4pda who made it
NOSS8 said:
Just read page 1.
12th November 2020, 03:39 AM |#5
Senior Member
229 posts
Thanks Meter: 108
More
Quote:
Originally Posted by NOSS8
Is it 100% functional?
The Russian on 4pda who made it
Click to expand...
Click to collapse
Okay let me reformulate cuz this pitchblack recovery thread is not clear... who's the russian on 4pda ? Can we got a link at least ?
Who ever he is,he make a great new recovery with awesome UI.
I am using it almost two weeks and its working fine, no problem, nothing..yes ,still is unofficial ,and the more things will coming..
I dont have nothing with this project, I am just sharing it because I like it..
meilbox said:
The link doesn't work...
Click to expand...
Click to collapse
https://drive.google.com/file/d/1NBVNr6hJbAI0mOEcRPY9JZ3E7Hqc01Qx/view?usp=drivesdk
Does decrypt by pin work on android11 rom?
TWRP can't do it. So if this recovery can, it must be helpful.
I use pin lock, and fingerprint ,when I go to recovery there is no ask for password,just enter normally, also if you use pattern then ask you for pattern.
Also there is a dfe.zip file that you can flash ,that will remove your password protect from your recovery. Works on oneOS
what is D.F.E?
https://www.google.com/search?sxsrf...5gBAKABAcgBCMABAQ&sclient=mobile-gws-wiz-serp
With this recovery you can uninstall magisk modules if you have a bootloop after install It.....very good work.