Database Users

[ZTE Blade Q Maxi] Unlock Network

Unlock network of your ZTE Blade Q Maxi, Orange Reyo.....
To unlock your phone you should know to use SPFlashTool
must have a backup flashable with SPFlashTool of stok rom or a custom rom
you can make it with MTKDroidTools(if you dont have allready)
phone drivers must be installed
after unlocked should must rewrited the IMEI with MTKDroidTool every time you change the rom
or use via code method, can get the code in sevice for some money
you do it on your risk
you will loose the warranty
1)charge the phone at least 50%(100% is better)
2)turn off the phone
3)start the SPFlashTool, press "Format"from interface
4)chec the "formatt all flash"
5)press "Format"button and conect the phone
the format process will start(if the drivers are installed properly the process wil start without err)
when it finish you will get green OK, disconect the phone and pull out the battery to stop it to boot, then put back the battery and keep it OFF
6)press the "Download" from interface
7)sellect the Android_scatter of your backup and it will be loaded automatical with all files from backup
8)press "Download" button and conect the phone
the download process will start and the phone will be flashed with your backup
when it finish, the green OK will apear and the phone will start
if it is stuck in boot, pull out the battery, put back the battery and start the phone in recovery and doo a "wipe data factory reset"
and then reboot the phone
now your phone should be unlocked
Enjoy
Ps. i re edit this thread with a new method for unlock
that method work for ZTE Blade Q Maxi and it shoudl work for Blade Q and Blade Q Mini

Will this allow the instalation and booting of custom roms as well or just the network lock?

ohgodwhy said:
Will this allow the instalation and booting of custom roms as well or just the network lock?
Click to expand...
Click to collapse
i booted o custom rom on ZTE Q Maxi with original lk.bin file and with this new too but are not full working untill now.
it not read the internal or external sdcard, no sound on speaker, just on head set
i will post it here later to get some help if i cant fix it
so untill now this lk.bin file unlock only the network on the phone
Trimis de pe al meu ZTE Blade Q Maxi

vaserbanix said:
i booted o custom rom on ZTE Q Maxi with original lk.bin file and with this new too but are not full working untill now.
it not read the internal or external sdcard, no sound on speaker, just on head set
i will post it here later to get some help if i cant fix it
so untill now this lk.bin file unlock only the network on the phone
Trimis de pe al meu ZTE Blade Q Maxi
Click to expand...
Click to collapse
Hi neighbor,...will this zip work on Q ???

pustinjak said:
Hi neighbor,...will this zip work on Q ???
Click to expand...
Click to collapse
yes will work
but i recomend you to replace the lk.bin file with one from Q not Q Maxi
find an stock rom from a virgin Q not branded and replace it
Trimis de pe al meu ZTE Blade Q Maxi

Hi ....
Doesn't work on my Reyo...
Android version 4.2.2
Baseband version MOLY.WR8.W1315.MD.WG.MP.V1.P13, 2013/10/31 16:48
Kernel version 3.4.5
Build number ORO_RO_P172D10_V3.3

radu.timbus said:
Doesn't work on my Reyo...
Android version 4.2.2
Baseband version MOLY.WR8.W1315.MD.WG.MP.V1.P13, 2013/10/31 16:48
Kernel version 3.4.5
Build number ORO_RO_P172D10_V3.3
Click to expand...
Click to collapse
What version you use?
Spflastool or CWM

SPFlashtool
No errors, all ok but still locked.....
vaserbanix said:
What version you use?
Spflastool or CWM
Click to expand...
Click to collapse

radu.timbus said:
No errors, all ok but still locked.....
Click to expand...
Click to collapse
You dont answer to my question.

SPFlashtool
SPFlashTool
It sais ol ok....but still locked.
Thx.
vaserbanix said:
You dont answer to my question.
Click to expand...
Click to collapse

radu.timbus said:
SPFlashTool
It sais ol ok....but still locked.
Thx.
Click to expand...
Click to collapse
Something is wrong!
I allredy have 3-4 confirmation + my phone.
You used spflash tool wich is in archive or else

....
I try again right now ....
I'll let you know in a few minutes.
vaserbanix said:
Something is wrong!
I allredy have 3-4 confirmation + my phone.
You used spflash tool wich is in archive or else
Click to expand...
Click to collapse
---------- Post added at 10:24 AM ---------- Previous post was at 10:11 AM ----------
No joke....
It doesn't work.....
I used exactly the archive.... and still network locked.....
thx.
radu.timbus said:
I try again right now ....
I'll let you know in a few minutes.
Click to expand...
Click to collapse

hi...
I managed to install CWM ans S3 version you provided.... THX for that!!!!
Still locked....
And now it sais "sim card slot permanently locked"....

radu.timbus said:
I managed to install CWM ans S3 version you provided.... THX for that!!!!
Still locked....
And now it sais "sim card slot permanently locked"....
Click to expand...
Click to collapse
Did you read my PM?

vaserbanix said:
Unlock network of your ZTE Blade Q Maxi, Orange Reyo.....
I prepare 2 ways to do this:
1) via SPFlash_tool
2)via CWM custom recovery
First of all chek if your phone is loked by your network provider
1) Download the archive;
it have SPFlash_tool, scatter and the lk.bin file
-extract the archive where you want
-start SPFlash_tool, sellect the scatter file, chek UBOOT(if is not allready cheked) and select the lk.bin file
-click Download, conect the phone in off mode and the process should start( if not start press vol up and power untill the process start)
when it finish deconect the phone and reboot it
you should have now an unlocked phone
2)Download the patch atached
copy it on the sdcard
reboot the phone in recovery CWM custom (not stok)
-install zip from sdcard/ chose zip/(select the patch)/ yes install
when it finish reboot the phone
and you should have an unlocked phone
Enjoy
Click to expand...
Click to collapse
I have managed to generate unlock codes for two zte blade q minis, if some one fancy to test free unlock codes please pm and report results.

xorti said:
I have managed to generate unlock codes for two zte blade q minis, if some one fancy to test free unlock codes please pm and report results.
Click to expand...
Click to collapse
Hello,
I have try your methode on a Startrail 4 (ZTE Q).
I was just a recommendation to change the file so I have try with you Zip file in recovery but now the phone constantly reboot on the boot logo...
Any idea on how to unbrick ?
Thank you.

-JFK- said:
Hello,
I have try your methode on a Startrail 4 (ZTE Q).
I was just a recommendation to change the file so I have try with you Zip file in recovery but now the phone constantly reboot on the boot logo...
Any idea on how to unbrick ?
Thank you.
Click to expand...
Click to collapse
Replace the lk.bin file with one for Blade Q in the archive and flash again.
Or flash with spflashtool a lk.bin file from your stock rom
Trimis de pe al meu Blade Q Maxi

vaserbanix said:
Replace the lk.bin file with one for Blade Q in the archive and flash again.
Or flash with spflashtool a lk.bin file from your stock rom
Trimis de pe al meu Blade Q Maxi
Click to expand...
Click to collapse
Where is located the lk.bin file ?
Thank you.
OK, I got it, how should I turn the phone to flash it ? Currently, I have no boot at all, can't enter recovery.

same here...did the cwm method..and not working on orange reyo .still network locked

brag288 said:
same here...did the cwm method..and not working on orange reyo .still network locked
Click to expand...
Click to collapse
if this methods doesnt work, you have to format the phone with SPflashTool and reflash a full backup with the same SPFlashTool.
i unlocked my phone with this method and it work, cant understand whay it doesnt work on all phones.
So i made an Files_to_Flashtool for each rom i ported Miui and Samsung_Note3 + one of the stok rom but modified.
i will post each one in its section
thats could be used for restoring a bricked phone too
atention is for Blade Q Maxi only

[Q] How Install new Rom and Recovery in Huawei Y625?

How Install new Rom and Recovery in Huawei Y625?
Hello everyone.
I just bought a Huawei Y625. I have root already, but I wanted to install a custom ROM and Recovery.
I'm a little lost because I can not find any information.
From already thank you all.

Intall Lollipop Huawei y625
Help me

Lollipop for huawei ascend y625-u51
Help me. I wanna a ROM to update huawei y625-u51 to lollipop

Wellington Britto said:
How Install new Rom and Recovery in Huawei Y625?
Hello everyone.
I just bought a Huawei Y625. I have root already, but I wanted to install a custom ROM and Recovery.
I'm a little lost because I can not find any information.
From already thank you all.
Click to expand...
Click to collapse
I did some google and didn't find any rom for your device, so now you either have to wait for someone to make one or have make one by yourself

Help to compile Huawei Y625 CWM or TWRP
Hello there! I am new to this, I have been reading and trying to compile a recovery for my Huawei Y625-U03, I hope that my work can help other users with the same model and those who are compiling other variants. The truth is I don't know much about porting... I can compile a recovery.img and probe but I get error with dt.img... however generates a recovery.img without dt. I've been tested importing the file (dt) from the stock rom, run well (with CWM theme, and touch) but I have the same options of the stock recovery ... any programmer could help me? Greetings from Venezuela

recovery
nando161982 said:
Hello there! I am new to this, I have been reading and trying to compile a recovery for my Huawei Y625-U03, I hope that my work can help other users with the same model and those who are compiling other variants. The truth is I don't know much about porting... I can compile a recovery.img and probe but I get error with dt.img... however generates a recovery.img without dt. I've been tested importing the file (dt) from the stock rom, run well (with CWM theme, and touch) but I have the same options of the stock recovery ... any programmer could help me? Greetings from Venezuela
Click to expand...
Click to collapse
saludos amigo, has logrado cambiarle el recovery que trae por defecto? es decir ponerle uno diferente. aca te dejo mi #+584166274046

23deenero said:
saludos amigo, has logrado cambiarle el recovery que trae por defecto? es decir ponerle uno diferente. aca te dejo mi #+584166274046
Click to expand...
Click to collapse
Pues aun nada que funcione al 100%

Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards

AkaruiTenshi said:
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
Click to expand...
Click to collapse
I am new at this. How do you install this image? Can you please direct me to where to look for a how to. Thank you.

First of all, you will need to install abd and fastboot drivers if you're on a windows pc, if you use linux, just install abd and fastboot packages and dependencies for your distro.
Connect the phone in the computer using an usb cable, and activate the debug in the phone
Next step, on windows open the command line... In linux, just open the terminal
Now call the abd, just type this (whitout quotes): "abd -start-server"
Wait a little bit, in your phone will apear a mensage to validare the abd acess to the phone, just say yes...
Again in the terminal or command line, type: "abd reboot bootloader"
(do not wait until the phone reboot) type "fastboot boot recovery.img"
After this, the twrp will boot in your phone, without installation (if you install the twrp, your warranty is void), you can use twrp for backup your stock rom for exemple... If you want to install the twrp, just change the last comand to: "fastboot flash recovery recovery.img"
Sorry for the bad english... But i hope that this kind of turorial could help you
Best regards

twrp
im using huawei y625-u32.. ..can install twrp in this device

Follow my kind of tuturial to boot twrp, without instalation... The u51 variant of the Y625 model has the bootloader unlocked from factory. The u32 variant maybe it's unlocked too, try and then reply here... Best regards

hi
Please upload the huawei y625 recovery image ,is it possible to install TWRP recovery on this phone ,i rooted phone with Kingoroot .
---------- Post added at 07:02 PM ---------- Previous post was at 06:29 PM ----------
AkaruiTenshi said:
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
Click to expand...
Click to collapse
link not working ,can You upload the huawei y625.img file ?
thanks..

The Huawei Y625 have 4GB internal storage ,than its usable 1,87GB ...Here is solution to maximize internal storage on y625:
1.download for Pc kingoroot and after instal root the phone(after this step You lose guaranty.
2.buy some Sd memory card 32gb class 10
3.download Partition manager for Pc,then with Partition manager format Sd card and create 2partition ,first one is extended and format it with EXT4 standard(this will be yours internal storage),the second partition will be Primary Fat32 standard...i was partitioned EXT4 size 9Gb the rest is fat32.
3 download from internet Apps2SD aplication...than create script and link all new instalations to EXT4(if you dont know how search solution on youtube
And voila you have 8gb internal storage...
If you need help contact me

here is a working TWRP I installed for myself and I can confirm it works the link : https://mega.nz/#!X9s3CCLQ!JhC1sJ0MwGsCfQJ7Frs7sI7MfGURo2PjAhESCeS-SDI
credits go to guy on youtube called The Best .. got it from him .. and for installation install it via Fastboot .. u can search tutorials

Link
AkaruiTenshi said:
Here is TWRP image for our phones (it must work on any Huawei Y625-xx :fingers-crossed:
****/meocloud.pt/link/77fb795f-bb60-4c52-ae9a-f57d2f9fd98b/TWRP_Y625.img/
(just erase the first **** from the url... i'm new in the forum and i can post links)
Best regards
Click to expand...
Click to collapse
The link you provide its offline. Do you have another link???

bula1ca said:
I am new at this. How do you install this image? Can you please direct me to where to look for a how to. Thank you.
Click to expand...
Click to collapse
get flashify.apk or mobile uncle.apk
flashify --install--recovery img--select--flash

Dark Knight Begins said:
get flashify.apk or mobile uncle.apk
flashify --install--recovery img--select--flash
Click to expand...
Click to collapse
Thank you.

bula1ca said:
Thank you.
Click to expand...
Click to collapse
hitting the thanks button insted helps me a lot.

Hi!! it's possible return to recovery stock?? I accidentally delete the system partition, and i don't know how recover it. Please, any help is welcome.
sorry for my bad english

I can not install Custom ROM

I would like to install this ROM because I like the multitask EUI and this application drawer (moving up):
https://tars-lepro3.blogspot.com.br...howComment=1524239318350#c1952750247252587486
I'm trying both ways I know: manual update and flash on TWRP but without success.
Manual update:
Rename ROM.zip to update.zip and go to System update and Local update.
In the screen of Recovery and install update says: corrupt. But the .zip is not corrupt, I tested it with other ROMs and also says corrupt.
Flash on TWRP:
Wipe: dalvik cache, data, system and cache> Install ROM.zip. The installation gave OK, however it only took 5s (I know it takes a lot more). I did wipe cache / dalvik and reboot. Now it only stays on the boot screen.

Post a screenshot of installation here about your 5 seconds in twrp.
Its also important to know your twrp version you use

Sony make.belive said:
Post a screenshot of installation here about your 5 seconds in twrp.
Its also important to know your twrp version you use
Click to expand...
Click to collapse
First: I installed Flash_ROM_17s_Grossoshop.bat (the only one I can install)
Second: With or without wipe. In Recover stock I tried to update with update.zip (TARS 20s) without success (say: corrupt).
Third: In Recovery TWRP (v3.2.1 and v3.0.2) I tried to install update.zip (TARS 20s) and completed with +-5 seconds of installation. After installation, it does not boot.
Screenshot of installation:
Atualização de partição de detalhes...
... feito
Suporte completo do SELinux está presente.
Modify by QQ:1449626263
MTP-habilitado
Instalando o arquivo zip \'/sdcard/update.zip\'
Verificação de arquivo MD5...
Saltando de verificação MD5: nenhum arquivo MD5 encontrado
TARS 20s by Steve Mars Installer
by Steve Mars
Formatting system...
Extracting system...
Creating symlinks...
Setting Permissions...
Extracting boot image...
******************
SuperSU installer
******************
- Mounting /system, / data and rootfs
- Extracting files
- System mode
- Disabling OTA survival
- Removing old files
- Creating space
- Placing files
- Restoring files
- Post-installation script
- Unmounting / system
- Done !
Busibox Installer Script
by osmOsis @ xda-developers
Mounting...
Extracting files...
Installing...
Using architecture: arm (Should not this be arm64 here?)
Using path: /system/xbin
Cleaning...
Creating symlinks...
Unmounting...
Done!
TARS 20s by Steve Mars Installed
script succeeded: result was [TARS 20s by Steve Mars Installed]
Atualização de partição de detalhes...
... feito
Click to expand...
Click to collapse

AlanRocker said:
First: I installed Flash_ROM_17s_Grossoshop.bat (the only one I can install)
Second: With or without wipe. In Recover stock I tried to update with update.zip (TARS 20s) without success (say: corrupt).
Third: In Recovery TWRP (v3.2.1 and v3.0.2) I tried to install update.zip (TARS 20s) and completed with +-5 seconds of installation. After installation, it does not boot.
Screenshot of installation:
Click to expand...
Click to collapse
Ok, it seems you need to start with a clean install.
Use all in one tool by mauro. Then first flash with this tool a fastboot rom (you can download them through the tool.)
After that, flash twrp with this also.
Then try again while booting in twrp, if you can flash you roms

What model pro3 do you have.
Sent from my SM-A730F using xda premium

mchlbenner said:
What model pro3 do you have.
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
Le Pro 3 x720 zl1 arm64 6/64GB

AlanRocker said:
Le Pro 3 x720 zl1 arm64 6/64GB
Click to expand...
Click to collapse
https://sourceforge.net/projects/li...irmware/firmware-20S-X720-le_zl1.zip/download
This link may help you.
Sent from my SM-A730F using xda premium

Sony make.belive said:
Ok, it seems you need to start with a clean install.
Use all in one tool by mauro. Then first flash with this tool a fastboot rom (you can download them through the tool.)
After that, flash twrp with this also.
Then try again while booting in twrp, if you can flash you roms
Click to expand...
Click to collapse
I discovered the problem. When transferring the ROM from the PC to the smartphone, the file corrupted in some way even with equal size. I installed via OTG successfully. Very strange.
Thank you all.

(recovery) ZtE BlAdE L110 dual (working)

Yes and Hello,
to keep things simple made a working CtR 6 recovery for the zte blade l110 on speadtrum basis
ok, simple two easy flashable .img files,
-one the ctr 6 custom touch recovery
DOWNLOAD:
https://www1.zippyshare.com/v/kXBfDA43/file.html
plus if you feel like a recovery filemanager just put it on sdcard or userdata
https://www115.zippyshare.com/v/aV9LR32z/file.html
- second the backup of stock original recovery in case of whatever caused it not to work
DOWNLOAD:
http://s000.tinyupload.com/?file_id=87966360478211256638
easy usable .img files flashable via
fastboot,
recovery?,
shell dd if=/root/recovery.img of=/dev/block/mmcblk0p22
just in case here are the classic toold adb,fastboot...
http://s000.tinyupload.com/?file_id=00162299023334251441
questions or other? thx to the original recovery compiler and coder , just was adding the blade l110 custom parts
btw still maybe doing small changes and soon upload a even little bit better scnd. version
have fun, leave comments

I'm very interested in testing it.
Did you already find host?
How about zippyshare.com?

zte blade l110 recovery
take a look now try and tell me things ok found a good host i hope
g2zer0 said:
I'm very interested in testing it.
Did you already find host?
How about zippyshare.com?
Click to expand...
Click to collapse

Just flashed it with flashify and it works perfect.
Big thx to you!

Reupload pls

fenerbuuh said:
Reupload pls
Click to expand...
Click to collapse
give it another try should be working now a little time

i flashed the recovery.img file inside the zip through fastboot, didn't work. Then i flashed through terminal with the given command and didn't work either. When i reboot to recovery after the flash, the screen remains black and boots normal. Please upload to zippyshare the backup, as the previous link is broken :/

eduardvi995 said:
i flashed the recovery.img file inside the zip through fastboot, didn't work. Then i flashed through terminal with the given command and didn't work either. When i reboot to recovery after the flash, the screen remains black and boots normal. Please upload to zippyshare the backup, as the previous link is broken :/
Click to expand...
Click to collapse
Oh
I forgot to mention something REALLY important that i didn't notice. :silly:
I flashed your custom recovery for the SINGLE sim Zte Blade l110 version. And this is for the DUAL sim version.I realize it was my mistake, thanks anyway for the effort. :fingers-crossed:
So everyone be AWARE that this recovery won't work with SINGLE sim version.

hi, do i need to unlock bootloader to flash this recovery?

Kabdii said:
hi, do i need to unlock bootloader to flash this recovery?
Click to expand...
Click to collapse
this oem has the bootloader unlocked. all what you would need to do is root it in order to flash anything. (or you could just flash through fastboot).

grazie
salve potete rimettere il link secondo il backup del recupero originale di stock in caso di qualunque cosa gli abbia impedito di funzionare

Oreo On NXT-L09 and L29

Install oreo AL10 chinese version on Mate 8 L09
1. You have to be in nougat, install the rollback to marshmallow creating on your MicroSD a folder named dload and inside this folder put the UPDATE.app, install with the 3 button combo or from the engineers menu, the change from l09 or 29 to al10 is only secure from android marshmallow..
2. Install the rom B100 with the 3 button combo, if you have an unlocked bootloader it will relock, you must have to unlock the bootloader many times here (2 or 3)..
3. After the reboot on the dload folder put the rom NXT-C00B129SP02, unzip this on dload and at the root of the sd put the OemInfo-all_cn.zip.
4. Now you have marshmallow with the NXT-C00B129SP02... flash TWRP via fastboot i will upload all this files.
5. Start the TWRP and flash OemInfo-all_cn.zip
6. Restart the phone on bootloader, flash the stock recovery, restart from adb (fastboot reboot) and when the screen turns black press the up and down volume buttoms to flash the dload... dont let the phone boot winouth installing the dload.
7. Now afther installing this you must be booting on marshmallow chinese version, some times this will take some time to boot, always leave it, if you wish you can update to 8 via ota but you probably aren't gonna have imei or signal, on your sd create a folder named B596 there you have to put HuRUpdater_0.4.zip and update.zip from B596 (everything uploaded in the pack).
8. Now flash TWRP marshmallow again, install the HuRUpdater_0.4.zip in B596 ( when the phone vibrates press the volume down button to install ), when it's ready reboot the phone.
9. Now you have Nougat chinese version ( no signal yet ), on your sd create a folder named B834 ( i will upload everything just to copy and paste) and there you will have the HuRUpdater_0.4.zip and update.zip... update_data_public.zip files..
10. InstallTWRP Nougat and flash the HuRUpdater_0.4.zip.
Now reboot the phone and wait, this will take time but it starts..
L29 To al 10:
You must check on Firmware Finder if your phone accepts the Oreo update.
1. Downgrade to Emui 4.0 any version..
2. With SRK tools change oeminfo y custom.bin to AL10. (You must have unlocked bootloader and root)
3. Download the NXT-AL10C00B172 rom and install with the 3 button combo.
4. Now you will have marshmallow with no signal.
5. Conectar to WiFi and update via ota to the last version, it will be 4 or more, install all versions
6. You will finish with B596
7. With B596 install Firmware Finder y search for this rom (NXT-AL10C17B828 (8.0.0.828), FF-No.: 152726) (Install it via Proxy).
8. Now you have Oreo B829 winouth signal.
9. Flash your cust ( from your region) via Fastboot with "fastboot flash cust cust.img"
9. Wipe everything (factory reset) and booting first time deactivate the updater, if you dont maybe there will be a permanent menssaje)
If you want open kirin!!
Flash via adb this command
fastboot flash system <name-of-rom-image-file>
Install TWRP Oreo, open TWRP, change language to english and search for the option fix encription, swipe to install the script and wipe data, all here on TWRP, now reboot to system and leave it boot, i have my NXT L09 from Colombia, running Oreo 8.1.0 with Openkirin Resurrection Remix OS, sorry for my bad english and i accept comments...
Link with everything for L09:
http://www.mediafire.com/file/eherlv3ht9xocg0/Files.rar
Link with everything for L29:
https://mega.nz/#F!L9RlXSiJ!BZ8Lzu5f0G3QvTYHLDrVNA

Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
An explanation from numeral 6, I hope in Spanish I am from Colombia, friend thanks for mate 8 nxt-L09 I do not understand what the boot manager among others

juanchos650 said:
Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
Click to expand...
Click to collapse
https://www.htcmania.com/showthread.php?t=1441276

Can you upload other screenshots? Of the three it only opens first

are there any major bugs you found on openkirin?

Phone Model "Unknown"
Hey thanks for the sweet tutorial. Amazingly simple but worked so well unlike some others I have seen. Bricked my Mate 8 so many times I still skeptical of the fact that I am actually on Oreo. Thanks dude.
I just have one problem though. My phone model says unknown in the about screen. How can this be rectified? Really hoping you can assist.

Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?

nobody will share his experience about this rom on l09? Stability? Bugs?​
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img

E_N_Y said:
Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?
Click to expand...
Click to collapse
Sorry for this time, I wish I could help you today, you can change the al10 to l09, search about it, the you can install any l09 rom or go back to al10

rophiroth said:
nobody will share his experience about this rom on l09? Stability? Bugs?​
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img
Click to expand...
Click to collapse
Thank you for your help! I forgot to explain that, I can say this about the rom, 5 months using it, really good, I think the charge is fast than stock, I thing, never metered, no bugs at all, very functional.. :laugh:

No bugs at all? I'm full of graphic bugs when using split or multiple window...

Can someone explain why we even get signal? in the tutorial since the debranding on all AL10 roms there is no sim detection, and when it comes to HuRUpdate the oreo stock al10 rom it works... The rom has some modifications?

L29 download link not work

What is the latest version of oreo (before patches01-02)? and which of the 5 files should I put, I always have in the system compilation
update.zip
update_full_NXT-AL10_all_cn.zip
update_full_NXT-TL00_cmcc_cn.zip
update_full_NXT-DL00_dualcu_cn.zip
update_data_full_public.zip
update_full_NXT-CL00_telecom_cn.zip

"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?

ngg71 said:
"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?
Click to expand...
Click to collapse
Search play store apk on Google, it is the first result, install it and go.

Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.

ngg71 said:
Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.
Click to expand...
Click to collapse
it's the same process, but vice versa ...
https://m.facebook.com/story/graphq...wMDAwMDgwNjQ0MjU0MTpWSzo4OTIxMDg3OTc2NTA3NjU=

So anyone bugless?? I only upgrade to oreo without bug with another method... that don't have network available :'c... I dont know how to have both at the same time

For Signal Fix No need to flash your region cust follow these steps.
1.open any root explorer
2.goto /cust/all/cn/prop and rename local.prop to local.prop.bak
3.restart and wait for 10 seconds
I know its ugly but it works and you won't lose updater too.