Any suggestions for the best rom to use on a GSM network. I am currently using my sm g900v with att
Sent from my SM-G900V using XDA Free mobile app
joeblow3 said:
Any suggestions for the best rom to use on a GSM network. I am currently using my sm g900v with att
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Try using one of the Att roms from that section. Im using a t-mo rom with my t-mo sim it works fine.
wrecless said:
Try using one of the Att roms from that section. Im using a t-mo rom with my t-mo sim it works fine.
Click to expand...
Click to collapse
Do you get LTE service by doing this???
joeblow3 said:
Do you get LTE service by doing this???
Click to expand...
Click to collapse
yes
is flashfire used to flash a rom from the other network?? I assume you would need to flash there kernel 1st correct??
Please provide some additional details regarding this setup. I am also using AT&T service with my verizon s5.
I thought since partitions are different we couldn't use AT&T/TMO roms on verizon s5.
hyperfire21 said:
Please provide some additional details regarding this setup. I am also using AT&T service with my verizon s5.
I thought since partitions are different we couldn't use AT&T/TMO roms on verizon s5.
Click to expand...
Click to collapse
The thing is that we are only allowed to flash touchwiz roms, go check out the alliance rom in the att section download it, but if your are in oc4 lollipop or any other version youll need flashfire by chainfire ( google around) subsribe to the beta test then download it. but if your on AO8 just flash a lower kernel I.E NK2 so as to as to get safestrap working
tried installing using safestrap, I'm at 4.4.2 ancg kernel.. and it errors when i try to install
joeblow3 said:
tried installing using safestrap, I'm at 4.4.2 ancg kernel.. and it errors when i try to install
Click to expand...
Click to collapse
are you using the 4.4.2 aliance rom? If not try that one.
wrecless said:
are you using the 4.4.2 aliance rom? If not try that one.
Click to expand...
Click to collapse
i've been looking for that but can't seem to find it, do i also need to change the kernel before flashing once i find it??
joeblow3 said:
i've been looking for that but can't seem to find it, do i also need to change the kernel before flashing once i find it??
Click to expand...
Click to collapse
I've been looking for a few days for an alliance att rom at 4.4.2 would anyone happen to know where I could locate one. I see a t-mobile but not att
Sent from my SM-G900V using XDA Forums
joeblow3 said:
I've been looking for a few days for an alliance att rom at 4.4.2 would anyone happen to know where I could locate one. I see a t-mobile but not att
Sent from my SM-G900V using XDA Forums
Click to expand...
Click to collapse
I also don't see the 4.4.2 rom but if you want to use the 5.0 rom just install it with safestrap then boot directly into download mode from safestrap and use odin to flash the VZW 5.0 OC4 (firmware only) be sure its firmware only and just let it boot.
How does using a att rom help get lte if I'm still using Verizon firmware
Sent from my SM-G900V using XDA Forums
joeblow3 said:
How does using a att rom help get lte if I'm still using Verizon firmware
Sent from my SM-G900V using XDA Forums
Click to expand...
Click to collapse
Just try it. Works for me. I'm using T-mobile though.
get the firmware only file here >>> http://forum.xda-developers.com/showthread.php?t=2784880
Flash the 5.0 rom from the At&t thread in Safestrap or Flashfire however you choose.
Boot Directly to download mode. (if using flashfire be sure to select reboot to download)
Flash the OC4 retail Firmware only using odin once it reboots unplug from computer and wait for the rom to boot.
1st boot will take a while. Thats it.
joeblow3 said:
I've been looking for a few days for an alliance att rom at 4.4.2 would anyone happen to know where I could locate one. I see a t-mobile but not att
Sent from my SM-G900V using XDA Forums
Click to expand...
Click to collapse
OK thanks for your help tried it. I had an error of not responding on install it final finished with about for wait instead of end buttons pushed. Then I flashed the firmware let it boot but it would not connect to the network. I checked the apn it was correct. Guess I go back to stock
Sent from my SM-G900V using XDA Forums
joeblow3 said:
OK thanks for your help tried it. I had an error of not responding on install it final finished with about for wait instead of end buttons pushed. Then I flashed the firmware let it boot but it would not connect to the network. I checked the apn it was correct. Guess I go back to stock
Sent from my SM-G900V using XDA Forums
Click to expand...
Click to collapse
Sorry I couldn't help. It must only work with T-mobile roms. Did everything else with the att rom work though like wifi?
Is there a 5.0 T-Mobile ROM that I can install on my Verizon S5?
What's the best way to root and install if my phone came with NK7?
Thanks
PsychoKilla666 said:
Is there a 5.0 T-Mobile ROM that I can install on my Verizon S5?
What's the best way to root and install if my phone came with NK7?
Thanks
Click to expand...
Click to collapse
First go here and read the 3rd post http://forum.xda-developers.com/verizon-galaxy-s5/help/samsung-user-lollipop-to-root-t3092863
Then go here and read the last post I made http://forum.xda-developers.com/showthread.php?t=2719498&page=2
wrecless said:
First go here and read the 3rd post http://forum.xda-developers.com/verizon-galaxy-s5/help/samsung-user-lollipop-to-root-t3092863
Then go here and read the last post I made http://forum.xda-developers.com/showthread.php?t=2719498&page=2
Click to expand...
Click to collapse
Great! Thank you very much
Related
Quick question i got a i337 and have been flashing rom since i got this phone about 3 months. last time i flash a rom and everytime i plug my phone to the PC its read my phone as a M919 Tmobile device but everything work fine beside that. What could have cause this and what can i do to fix it? Thanks
Did you flash a custom rom from Tmobile by chance?
Nope just been flashing rom on our ATT forums but some were ported from the Tmobile.
Overgloc said:
Nope just been flashing rom on our ATT forums but some were ported from the Tmobile.
Click to expand...
Click to collapse
bingo, that is it, ported tmo rom to att. No biggie, does that keep you from doing anything you need?
TheAxman said:
bingo, that is it, ported tmo rom to att. No biggie, does that keep you from doing anything you need?
Click to expand...
Click to collapse
The only I see that could get affected is updating TWRP thru Goo Manager. TWRP will give the T-Mobile version instead of ATT.
Sent from my SGH-I337 using xda premium
doktor buknasty said:
The only I see that could get affected is updating TWRP thru Goo Manager. TWRP will give the T-Mobile version instead of ATT.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
THIS!! I did install recovery thur GOO. What can i do to fix this?
Overgloc said:
THIS!! I did install recovery thur GOO. What can i do to fix this?
Click to expand...
Click to collapse
You can manually download TWRP from their website and install it using the "dd" command in a root terminal or root adb shell. It's a bit more hands-on, but in the end you just run a command or two. Instructions are on TWRP's website, and are specific to each phone. WARNING: If you do end up flashing a recovery via this method, be 100% sure you selected the right phone on TWRP's website, and be 110% sure you get the partition number right at the end of the "dd" command. Flashing the recovery to the wrong eMMC partition could easily result in a hard brick. (basically, just follow instructions and you'll be fine).
doktor buknasty said:
The only I see that could get affected is updating TWRP thru Goo Manager. TWRP will give the T-Mobile version instead of ATT.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Ahh, yes, goo will install the TMO version, you need to use the flash att version in the Dev att forum.
Aou maybe right, that might be the only way, I didn't find the flash version....you could try this..
http://goo.im/devs/s0updev/goomanager
http://forum.xda-developers.com/showthread.php?t=2314494
Flashable twrp zip in post #2
xBeerdroiDx said:
http://forum.xda-developers.com/showthread.php?t=2314494
Flashable twrp zip in post #2
Click to expand...
Click to collapse
I have been out done. I forgot you had that in your guide. have me banned for a few days for not following procedures.
Hilarious
Thanks for all yall help guys!! will try and report back.
Just change the data in build.prop to i337. Problem solved
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
looking to go back o stock on 4.2.2 with GE rom and want to return 100% stock i dnt have a backup it got deleted any way to still do this?
kasek55 said:
looking to go back o stock on 4.2.2 with GE rom and want to return 100% stock i dnt have a backup it got deleted any way to still do this?
Click to expand...
Click to collapse
Anyone trying to sell my phone buyer wants it stock
Odin the current firmware that you are on. Do you know what it is? Go into settings, about phone and look for your baseband. What are the last three characters?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Odin the current firmware that you are on. Do you know what it is? Go into settings, about phone and look for your baseband. What are the last three characters?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I tried following this guide
http://www.androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html?m=1
And it didn't work said failed base band last three digits r MG1
kasek55 said:
I tried following this guide
http://www.androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html?m=1
And it didn't work said failed base band last three digits r MG1
Click to expand...
Click to collapse
Are you on att? Or do you have an i337m? The mk2 firmware on that link isn't going to work for you.
Edit, try here http://forum.xda-developers.com/showthread.php?p=43851818
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Are you on att? Or do you have an i337m? The mk2 firmware on that link isn't going to work for you.
Edit, try here http://forum.xda-developers.com/showthread.php?p=43851818
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I have the Canadian s4 device says sgh-i337
kasek55 said:
I have the Canadian s4 device says sgh-i337
Click to expand...
Click to collapse
I337 is the AT&T, but since you said MG1 and that firmware never existed for us it's I337m (Canadian like you said). In any case, go to sammobile.com and you should be able to find your firmware.
DeadlySin9 said:
I337 is the AT&T, but since you said MG1 and that firmware never existed for us it's I337m (Canadian like you said). In any case, go to sammobile.com and you should be able to find your firmware.
Click to expand...
Click to collapse
So I guess go to sammob find firmware and then follow the link posted above
You might have to odin the firmware a couple of times. I usually odin the first time, reset the CSC code back to what ever carrier you are using, then odin again and then setup your accounts and such. If the new firmware has a new radio, it might take two times for it to grab.
VA3DBJ said:
You might have to odin the firmware a couple of times. I usually odin the first time, reset the CSC code back to what ever carrier you are using, then odin again and then setup your accounts and such. If the new firmware has a new radio, it might take two times for it to grab.
Click to expand...
Click to collapse
alright going to give this a try im so used to iphones had the first ipod touch and 2nd and then an iphone 4 for 3 years... switched to android a year ago and find it way more confusing....
edit: got t figured out got my firmware from sammob and then followed the guide posted by jd1639
[Q] Help Please, stuck in odin mode and "software not recognized by AT&T "
So I got a new phone and I thought that this would be a great opportunity to learn how to do things on my own with my phones, Lucky me my new phone (Nexus 5) is way easier to root and do the fun stuff... but not my Galaxy S4
trying to odin back to stock I got stuck in Download mode and later i got a msg saying "Software not recognized by AT&T was found in your device" and on the top line in red said "Secure Fail: Kernel"
How can I flash the kernel and the new recovery ?
remember I am a Noob trying to learn, so go easy on me
What file were you trying to flash with odin? Do you have a link? Also, what firmware version was your phone on? The version you're trying to flash in Odin had to be at least as new as what your phone was on.
Sent from my Nexus 5 using XDA Free mobile app
The boot loader is locked. This means that the stock recovery and kernel cannot be replaced. Also, you cannot Odin flash firmware that contains a boot loader with a lower version than the one you are currently running.
jd1639 said:
What file were you trying to flash with odin? Do you have a link? Also, what firmware version was your phone on? The version you're trying to flash in Odin had to be at least as new as what your phone was on.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
jmjoyas said:
The boot loader is locked. This means that the stock recovery and kernel cannot be replaced. Also, you cannot Odin flash firmware that contains a boot loader with a lower version than the one you are currently running.
Click to expand...
Click to collapse
hey guys I was trying to flash the Pit file and the AP file, took me a few tries but the phone is up an running again, it is a little laggy tho, i feel like it just needs to be updated now ... might root it again and odin back to stock because i feel like theres something i did wrong but can't figure out why, if i brick it its fine, this is my "Guinea Pig Phone" because i am trying to learn about root and all ( Yes i am a noob ) I've been "studying" for about 2 month now
oh and Yes i made sure it was the right files for my AT&T Samsung Galaxy S4 SGH-I337
Brunolarogian said:
hey guys I was trying to flash the Pit file and the AP file, took me a few tries but the phone is up an running again, it is a little laggy tho, i feel like it just needs to be updated now ... might root it again and odin back to stock because i feel like theres something i did wrong but can't figure out why, if i brick it its fine, this is my "Guinea Pig Phone" because i am trying to learn about root and all ( Yes i am a noob ) I've been "studying" for about 2 month now
oh and Yes i made sure it was the right files for my AT&T Samsung Galaxy S4 SGH-I337
Click to expand...
Click to collapse
What firmware version are you on and why are you flashing a pit file? Don't flash the pit.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
What firmware version are you on and why are you flashing a pit file? Don't flash the pit.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Like I mentioned earlier I am trying to learn and one of the links I found told me to flash both PIT and AP
after i finally made it work, my version was back to touchwiz and android 4.2.2
Brunolarogian said:
Like I mentioned earlier I am trying to learn and one of the links I found told me to flash both PIT and AP
after i finally made it work, my version was back to touchwiz and android 4.2.2
Click to expand...
Click to collapse
If it's running show I would flash the mdl firmware again without the pit file. Then root it with motochoper and put twrp on it. Then flash a custom rom.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If it's running show I would flash the mdl firmware again without the pit file. Then root it with motochoper and put twrp on it. Then flash a custom rom.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
MDL file or md5? just in case I have the wrong file, do you have a link for the correct one by any chance?
Brunolarogian said:
MDL file or md5? just in case I have the wrong file, do you have a link for the correct one by any chance?
Click to expand...
Click to collapse
Go to sammobile.com for mdl, 4.2.2, firmware
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go to sammobile.com for mdl, 4.2.2, firmware
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Awesome... thank you, Brother
I'll try that as soon as I leave work and get home, if you don't mind, can I keep asking you a few questions later on when I'm doing it ?
I'm actually really interested and excited to learn all this
Brunolarogian said:
Awesome... thank you, Brother
I'll try that as soon as I leave work and get home, if you don't mind, can I keep asking you a few questions later on when I'm doing it ?
I'm actually really interested and excited to learn all this
Click to expand...
Click to collapse
I'm on xda frequently so I'll be around
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
I'm on xda frequently so I'll be around
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
You sir are THE MAN .... it worked, it's back to normal =]
BruKnowsBest said:
You sir are THE MAN .... it worked, it's back to normal =]
Click to expand...
Click to collapse
Glad you got it working
Sent from my Nexus 5 using XDA Free mobile app
Hi, as I know if the cell phone firmware changes, it will probably brick. But recently I bought S5 version from a local guy which having firmware of g900f.
Q. It is possible ? Should I move to g900f threads ?
I m uploading screenshots, if someone understand n tell me I will be very pleased.
[email protected] said:
Hi, as I know if the cell phone firmware changes, it will probably brick. But recently I bought S5 version from a local guy which having firmware of g900f.
Q. It is possible ? Should I move to g900f threads ?
I m uploading screenshots, if someone understand n tell me I will be very pleased.
Click to expand...
Click to collapse
Curious - can you give me the output of "cat /sys/block/mmcblk0/device/cid" from Terminal Emulator?
Also - try flashing this in Odin.
I dont why it was not working but I tried via efs and this is I have 150xxxxxxxxcccccc510xxx
[email protected] said:
Hi, as I know if the cell phone firmware changes, it will probably brick. But recently I bought S5 version from a local guy which having firmware of g900f.
Q. It is possible ? Should I move to g900f threads ?
I m uploading screenshots, if someone understand n tell me I will be very pleased.
Click to expand...
Click to collapse
I'm currently using CM13 and then installed boeffla kernel. After the install mine changed to 900f. I just installed the freshest nightly and kept the stock kernel. Mine now reads 900v.
Aceshootn said:
I'm currently using CM13 and then installed boeffla kernel. After the install mine changed to 900f. I just installed the freshest nightly and kept the stock kernel. Mine now reads 900v.
Click to expand...
Click to collapse
What do you mean I didnt understand completely?
Especially the part about installing kernel, what does it have to do with changing firmware and changing csc ?
Have a look I have two options.
[email protected] said:
I dont why it was not working but I tried via efs and this is I have 15xxxxxxxxxxxxxxxxxxxxxxx
Click to expand...
Click to collapse
BY THE WAY, I meant PM it to me. You don't want this public!
Nandr0idC0nsumer said:
BY THE WAY, I meant PM it to me. You don't want this public!
Click to expand...
Click to collapse
So what did u understand?
Sent from my SM-G900F using XDA-Developers mobile app
[email protected] said:
So what did u understand?
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
I was trying to see whether you had a Samsung or Toshiba eMMC. I believe (I may be wrong) that only Verizon variants had the Toshiba eMMC.
Nandr0idC0nsumer said:
I was trying to see whether you had a Samsung or Toshiba eMMC. I believe (I may be wrong) that only Verizon variants had the Toshiba eMMC.
Click to expand...
Click to collapse
I need to know about what I have asked in my thread, I will be very pleased.
Second can I flash firmware of g900f to 900v ?
I dont think so it so simple, may be i need to extract the boot.img n etc files and then i can flash ?
So a little help needed.
Sent from my SM-G900F using XDA-Developers mobile app
[email protected] said:
I need to know about what I have asked in my thread, I will be very pleased.
Second can I flash firmware of g900f to 900v ?
I dont think so it so simple, may be i need to extract the boot.img n etc files and then i can flash ?
So a little help needed.
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
there are 2 possibilities about flashing g900f firmware on your g900v:
1) it will refuse to flash
2) you will hardbrick
as I said earlier, please flash this to check whether your bootloader is locked or unlocked.
Nandr0idC0nsumer said:
there are 2 possibilities about flashing g900f firmware on your g900v:
1) it will refuse to flash
2) you will hardbrick
as I said earlier, please flash this to check whether your bootloader is locked or unlocked.
Click to expand...
Click to collapse
I dont have dev device thts for sure coz I studied Note 3 verizon, coz i owned note 3 before, if I have a unlocked bootloader or whateva u say then it wud have been written on my downloade mode dev edition ?
And secondly if I install this recovery then what are chances ? I will stuck in the recovery, then I have to redo n start from the scratch? And what I have right now firmware showing g900f on my 900v it will be gone ?
Sorry for asking too many questions.
Sent from my SM-G900F using XDA-Developers mobile app
[email protected] said:
I dont have dev device thts for sure coz I studied Note 3 verizon, coz i owned note 3 before, if I have a unlocked bootloader or whateva u say then it wud have been written on my downloade mode dev edition ?
And secondly if I install this recovery then what are chances ? I will stuck in the recovery, then I have to redo n start from the scratch? And what I have right now firmware showing g900f on my 900v it will be gone ?
Sorry for asking too many questions.
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
The G900F has an unlocked bootloader - the G900V does not. If it does flash, you can root if you want. If it doesn't flash - all your stuff will still be there.
By the way - there is no such thing as too many questions
Nandr0idC0nsumer said:
The G900F has an unlocked bootloader - the G900V does not. If it does flash, you can root if you want. If it doesn't flash - all your stuff will still be there.
By the way - there is no such thing as too many questions
Click to expand...
Click to collapse
Check this lol,
May be I m not getting or u r not getting what I m trying to saying and has been asking.
Note : I m rooted already, I bought this cell phone locally, I dont know exactly the guy whom I bought the cell phone or some other guy port this. When i go download mode it shows 900v not 900f.
More u can check I m uploading the pics
Sent from my SM-G900F using XDA-Developers mobile app
[email protected] said:
Check this lol,
May be I m not getting or u r not getting what I m trying to saying and has been asking.
Note : I m rooted already, I bought this cell phone locally, I dont know exactly the guy whom I bought the cell phone or some other guy port this. When i go download mode it shows 900v not 900f.
More u can check I m uploading the pics
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
This is VERY weird. Flashing PB1 should get rid of it... any bad side effects?
Nandr0idC0nsumer said:
This is VERY weird. Flashing PB1 should get rid of it... any bad side effects?
Click to expand...
Click to collapse
Battery drainage so far, flashing pb1 ? And get rid of what ?
Sent from my SM-G900F using XDA-Developers mobile app
[email protected] said:
Battery drainage so far, flashing pb1 ? And get rid of what ?
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
I meant that should get rid of the G900F files.
If there are any adverse effects, flash PB1 using odin. Do you know how to (if you want to?)
Nandr0idC0nsumer said:
I meant that should get rid of the G900F files.
If there are any adverse effects, flash PB1 using odin. Do you know how to (if you want to?)
Click to expand...
Click to collapse
Yes I can, but the thing is that I want to keep it, coz it give me lte signals, on the other hand Verizon doesnt give me lte. Thts what happened on my note 3 Verizon, thts why I changed my device which I loved so much.
But here I m plus one coz I can unlock the bootloader and install any rom but not sure those rom supports the bandwith of my lte sim.
Any advice ? Also uploading the network mode selection.
Sent from my SM-G900F using XDA-Developers mobile app
[email protected] said:
Yes I can, but the thing is that I want to keep it, coz it give me lte signals, on the other hand Verizon doesnt give me lte. Thts what happened on my note 3 Verizon, thts why I changed my device which I loved so much.
But here I m plus one coz I can unlock the bootloader and install any rom but not sure those rom supports the bandwith of my lte sim.
Any advice ?
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
Now I understand the situation.
I would NOT attempt to unlock the bootloader, just use FlashFire, unless you want AOSP. Try flashing a G900F rom on yours. I don't see why it would not work
Nandr0idC0nsumer said:
Now I understand the situation.
I would NOT attempt to unlock the bootloader, just use FlashFire, unless you want AOSP. Try flashing a G900F rom on yours. I don't see why it would not work
Click to expand...
Click to collapse
Check the screenshot which I edit and uploaded
Sent from my SM-G900F using XDA-Developers mobile app
Which rom of g900f ?
Sent from my SM-G900F using XDA-Developers mobile app
Hey XDA,
I just recently purchased a AT&T S7 (SM-G930A). I also just recently found out that AT&T doesn't push updates to non AT&T network phones. I am using the phone with T-Mobile and I was wondering if it was possible to flash the T-Mobile stock rom without tripping Knox or anything of that sort. I remember being able to do this to my AT&T Note 2 back in the day. If it is possible, can someone kindly link me to the file and instructions on how to flash the stock ROM from T-Mobile? Thanks!
You can, however once you do you can't go back. It may be possible in the future, but Tmobile has a v3 bootloader, and AT&T is still on v2 bootloader.
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
highaltitude said:
You can, however once you do you can't go back. It may be possible in the future, but Tmobile has a v3 bootloader, and AT&T is still on v2 bootloader.
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you! One more question, I have the stock T-Mobile ROM and for the CSC, there are two files:
CSC and HOME_CSC
Which one do I choose in Odin for the CSC option?
Thanks
When attempting to flash using Odin 3.12.3, I get this error in the log:
FAIL! SHA256 is invalid
This seems to be because of a corrupt file?
I downloaded the ROM from two different sources now and still I get the same error.
Thanks
IbbiAnsi said:
When attempting to flash using Odin 3.12.3, I get this error in the log:
FAIL! SHA256 is invalid
This seems to be because of a corrupt file?
I downloaded the ROM from two different sources now and still I get the same error.
Thanks
Click to expand...
Click to collapse
use different version ODIN available in root guide in Verizon thread
kuduku said:
use different version ODIN available in root guide in Verizon thread
Click to expand...
Click to collapse
Thank you so much!! This worked!
And I figured ou the difference between HOME_CSC and CSC:
HOME_CSC keeps your data while CSC wipes it
Thanks so much
IbbiAnsi said:
Thank you so much!! This worked!
And I figured ou the difference between HOME_CSC and CSC:
HOME_CSC keeps your data while CSC wipes it
Thanks so much
Click to expand...
Click to collapse
So TMobile ROM on 930A . Any issues ? Did you try going back to AT&T ROM
All that talk out bootloader versions and not able to restore back to AT&T ROM
Can you odin Unlocked 930U version ?
I'm using Cricket on AT&T S7 variant and I couldn't get any update from AT&T, which pissed me off. So I decided to flash G930U firmware and I succeeded. But unfortunately, there isn't a single G930U update been released so far, which is quite surprising.
Other than the update, I'm extremely satisfied with the new firmware. It's so fast and clean comparing to my previous bloated AT&T firmware, free of all kinds of overheating, battery dropping, slowing down, crashing, auto-restarting, bugs and lags (Just so you know, my G930A firmware was the newest. I had to take my phone to Best Buy to update. And I used PDP to disable bloatwares). I highly recommend everyone to flash G930U. The new firmware also has an APP called Samsung+. It's very useful and it tells you if it detected slow charging, or reminds you to restart your phone if it hasn't been restarted for a while, etc.
I'm still wondering if I can receive OTA after flashing anther variant firmware, but I can't confirm since there's no update for G930U yet. I'm curious to know if OP could receive any T-Mobile update after flashing.
kuduku said:
So TMobile ROM on 930A . Any issues ? Did you try going back to AT&T ROM
All that talk out bootloader versions and not able to restore back to AT&T ROM
Can you odin Unlocked 930U version ?
Click to expand...
Click to collapse
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Sent from my SM-G930T using Tapatalk
hugeadrian said:
I'm using Cricket on AT&T S7 variant and I couldn't get any update from AT&T, which pissed me off. So I decided to flash G930U firmware and I succeeded. But unfortunately, there isn't a single G930U update been released so far, which is quite surprising.
Other than the update, I'm extremely satisfied with the new firmware. It's so fast and clean comparing to my previous bloated AT&T firmware, free of all kinds of overheating, battery dropping, slowing down, crashing, auto-restarting, bugs and lags (Just so you know, my G930A firmware was the newest. I had to take my phone to Best Buy to update. And I used PDP to disable bloatwares). I highly recommend everyone to flash G930U. The new firmware also has an APP called Samsung+. It's very useful and it tells you if it detected slow charging, or reminds you to restart your phone if it hasn't been restarted for a while, etc.
I'm still wondering if I can receive OTA after flashing anther variant firmware, but I can't confirm since there's no update for G930U yet. I'm curious to know if OP could receive any T-Mobile update after flashing.
Click to expand...
Click to collapse
I flashed to the latest update of the ROM so I can't prove it works. But from what I've heard, after flashing the ROM you need to factory reset the phone so it can unregister from att and register to whatever carrier you are using it on. I am not sure how true this is but I read it somewhere and it seems to make sense.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
if you ever switch ROMs please check about the issue of bootloader version and not able to revert back .
Not able to revert back is the only issue keeping me from odin to T mobile ROM
If bootloader version is a problem then you cannot flash 930U firmware also
Is that so ?
kuduku said:
if you ever switch ROMs please check about the issue of bootloader version and not able to revert back .
Not able to revert back is the only issue keeping me from odin to T mobile ROM
If bootloader version is a problem then you cannot flash 930U firmware also
Is that so ?
Click to expand...
Click to collapse
I'm not sure what bootloader the G930U has. The att ROM has v2. If it's newer than that, then downgrading isn't possible. Is its the same, then it should be fine.
Sent from my SM-G930T using Tapatalk
Wonder if wifi calling works using a TMobile firmware with att service
joe3681 said:
Wonder if wifi calling works using a TMobile firmware with att service
Click to expand...
Click to collapse
T-mobile WiFi calling works fine on the T-mobile ROM.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
I'm not sure what bootloader the G930U has. The att ROM has v2. If it's newer than that, then downgrading isn't possible. Is its the same, then it should be fine.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
930A and 930U both have to be similar bootloader , thats why we could change ROMs
kuduku said:
930A and 930U both have to be similar bootloader , thats why we could change ROMs
Click to expand...
Click to collapse
If they are the same, then switching between them should be fine.
Sent from my SM-G930T using Tapatalk
IbbiAnsi said:
No issues at all so far. Works perfectly. I don't really want to go back to the stock ATT ROM because I don't need it.
Could you please check for me if T-Mobile ROM has portuguese language?
Thank you
Click to expand...
Click to collapse
IbbiAnsi said:
If they are the same, then switching between them should be fine.
Sent from my SM-G930T using Tapatalk
Click to expand...
Click to collapse
query is switching from T mobile ROM back to AT&T . Please update if and when you do it
kuduku said:
query is switching from T mobile ROM back to AT&T . Please update if and when you do it
Click to expand...
Click to collapse
This won't be possible until ATT decides to update to bootloader V3
Sent from my SM-G930T using Tapatalk
I was also able to flash the 930T on my 930A. I saw there was a Note 7 port but you need root and TWRP. Haven't tried flashing back to 930U yet, but thinking about it.