Related
I tell you I unlock it first, then I had problems with some widgets and I learned some new updates.
Then, I made a backup with Sony_Ericsson_Backup_and_restore.
After searching, I root my phone with "GINGERBREAK" downloaded from the internet (GingerBreak-v1.20) and finally settled "Titanium Backup" to remove some applications from my operator, then install the CLOCKWORDMOD (do not know what for) and and finally I started to flash ...
After root, flashing with FlashTool_0.2.9.1.
I suggested steps for flashing and inserted this update: "LT15i_4.0.A.2.368_Generic Global", with "wiped ...", which is to delete everything and set it to zero ..
Normal work for me ... I sent version 2.3.2 to 2.3.3 (thinking I would send to 2.3.4). It was great ... Then I appeared a notice of samsung (on phone), to install version 2.3.4 (4.0.1.A.0.283 I think it was that number) and when it started to install warned me he was going to shut down, spent 6 or 7 minutes and not lit. I tried to turn it on and vibrated, then vibrate him again and try to turn rang again, but soon ...
Then I could not turn ...
Once this happened I was like crazy trying to fix the COMPANIOM, but nothing ...
I flash again, this time with this "LT15i_4.0.2.A.0.42_ (1247-1041). Ftf" but did not recognize the flashtool as the first time coming out of the mobile code when you open the program loads and displays the model number of the phone, it did not appear.
Finally, press flash and began. (To this already, before, try reinstalling the Global LT15i_4.0.A.2.368_Generic where my computer does not recognize, nor giving flash, just not recognized out in red letters)
When flashing with the latest LT15i_4.0.2.A.0.42_ (1247-1041). Ftf, the normal flashing until the end. But my phone just did not work. The light that was on the side of my phone was green ...
I sent a technician and he said he could not ....=/
I hope you can help and serve as a case to be resolved.
Thank you very much, good luck!
With bootloader unlocked by other methods different to setool one you will get bricked after try to install an OTA update
In order to get phone back to life just flash this with flashtool
http://www.mediafire.com/download.php?v4d3jdf136ymaxr
If you are interested in fix that annoying problem with ota update check this thread
http://forum.xda-developers.com/showthread.php?t=1126358
Greetings
ozfred said:
.... then install the CLOCKWORDMOD (do not know what for) ......
Click to expand...
Click to collapse
Lol dude, don't install things if you don't know what are those for
But i did it...u_U! So, now?
Ok, so i am reposting this hoping that someone could help me with my problem. maybe I have not explained it enough the last time.
I am still not able to update my g7102 to 4.4.2 kitkat, it always goes well everytime i try to update it via Odin (from Sammobile) or OTA (450mb). but here's the problem, It always gets stucked at the screen where I get the phone model with "Rebooting Recovery" in blue. I had to wait for around 20mins before it go to android animation where it has a green line below showing that its applying the update, then it goes to the setup wizard but touchscreen doesnt work. I tried turning it off an on but I had to wait for another 20mins and touchscreen still doesnt work.
I want to try anything first before going to the service center and pay since I got this from a different country and dont think if it still has warranty.
I really want kitkat on my phone. I hope someone could help me with this.
Thanks guys!
TALE OF A HEART BROKEN ROOT ATTEMPT
hello xda members
i am a note 3 N900 (exynos)user from India. i bought this phone in december 2013. all was going pretty good for a while. after almost 6 months the battery life started to diminish. initially i could get 24 h total time with 3-4 hours screen time and with 3G data on intermittently. but once the battery life decreased and got heating issues near the camera i decided to root. I had taken my phone to authorized samsung service centres twice to know whether my phone has any battery issues to which they said " everything is fine ". i waited till the end of my warranty period and attempted to root in january 2015. i have been doing many researches by reading posts and watching videos online. Finally the D day came and i decided to go for it !! I tried everything as mentioned in the video by cursed4eva based on chainfires post. everything went fine and finally got a message : FAILED !! i tried once more and the end result was same. then on my 46k worth note 3 i saw this heart breaking message " "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". i tried to do so in kies but it was also futile. finally i took my phone to a nearby mobile shop and they said this can be repaired but will take some time, pls come in the afternoon. I was totally disappointed and was thinking just because of this root attempt i have spoiled all these hard earned money of mine At around 5 pm in the evening i got the phone back . i was so happy to see it was working fine ! but i lost 500 indian rupees for that !
End result of that tiring day was like this : i tripped my knox counter, phone wasnt rooted and lost 500 rupees
later my battery life decreased. after a full charge now i get only 14 hrs with 2.5-3 h screen time( phone is just 1 year old). when i tried to search for any soft ware updates i got one more wonderful message which conveyed the message" your device has been modified and no OTA " When i hear that lollipop update is at the door steps i can only sit back with a heart full of sorrow
dear friends out here , i need your priceless help in this issue. I am not well versed with this rooting stuff , so need a simple explanation about what actually would have gone wrong with my rooting extravaganza !! i have read some posts that my mobile can be modified in such a way that knox counter will be 0x0 and system status original which will help me update via OTA. so please guide me through what all things have to be done and what to do in case i see the heart breaker "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." again !!! . After all these , i tried to format my phone thinking it will improve the battery life, but factory resetting both ways is impossible now.
in concise , my requirements
1. need to root my device safely- Warranty period is over now
( SM N900, Kitkat 4.4.2, base band version N900DDUENG1 , kernel version 3.4.39-1955999, Build number KOT49H.N900XXUENF3)
[email protected]#1 Mon jun 23 21:02:09 KST2014)
2. need to update to lollipop OTA and reset KNOX to 0x0 and system status to stock
3. is my battey life normal ?? dec 2013 model getting 14 hours 100 to 0 % with 2.5-3h screen time and 50mts of voice call and whatsapping and chrome browsing on H+ (3G) network with 2G plan
4. how to factory reset the phone ( i tried using settings and hard keys- both failed) . when i released the power button the galaxy note 3 logo vanished and reappeared and went straight to boot. i dint get the menu to reset the data)
Please , please give ur valuable advices rather than redirecting me to some links which will redirect me to some never ending loops !! if someone from the geniuses have time, please help me through my facebook messenger or whatsapp
with lots of respect and love:good:
AK
drheart said:
TALE OF A HEART BROKEN ROOT ATTEMPT
hello xda members
i am a note 3 N900 (exynos)user from India. i bought this phone in december 2013. all was going pretty good for a while. after almost 6 months the battery life started to diminish. initially i could get 24 h total time with 3-4 hours screen time and with 3G data on intermittently. but once the battery life decreased and got heating issues near the camera i decided to root. I had taken my phone to authorized samsung service centres twice to know whether my phone has any battery issues to which they said " everything is fine ". i waited till the end of my warranty period and attempted to root in january 2015. i have been doing many researches by reading posts and watching videos online. Finally the D day came and i decided to go for it !! I tried everything as mentioned in the video by cursed4eva based on chainfires post. everything went fine and finally got a message : FAILED !! i tried once more and the end result was same. then on my 46k worth note 3 i saw this heart breaking message " "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". i tried to do so in kies but it was also futile. finally i took my phone to a nearby mobile shop and they said this can be repaired but will take some time, pls come in the afternoon. I was totally disappointed and was thinking just because of this root attempt i have spoiled all these hard earned money of mine At around 5 pm in the evening i got the phone back . i was so happy to see it was working fine ! but i lost 500 indian rupees for that !
End result of that tiring day was like this : i tripped my knox counter, phone wasnt rooted and lost 500 rupees
later my battery life decreased. after a full charge now i get only 14 hrs with 2.5-3 h screen time( phone is just 1 year old). when i tried to search for any soft ware updates i got one more wonderful message which conveyed the message" your device has been modified and no OTA " When i hear that lollipop update is at the door steps i can only sit back with a heart full of sorrow
dear friends out here , i need your priceless help in this issue. I am not well versed with this rooting stuff , so need a simple explanation about what actually would have gone wrong with my rooting extravaganza !! i have read some posts that my mobile can be modified in such a way that knox counter will be 0x0 and system status original which will help me update via OTA. so please guide me through what all things have to be done and what to do in case i see the heart breaker "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." again !!! . After all these , i tried to format my phone thinking it will improve the battery life, but factory resetting both ways is impossible now.
in concise , my requirements
1. need to root my device safely- Warranty period is over now
( SM N900, Kitkat 4.4.2, base band version N900DDUENG1 , kernel version 3.4.39-1955999, Build number KOT49H.N900XXUENF3)
[email protected]#1 Mon jun 23 21:02:09 KST2014)
2. need to update to lollipop OTA and reset KNOX to 0x0 and system status to stock
3. is my battey life normal ?? dec 2013 model getting 14 hours 100 to 0 % with 2.5-3h screen time and 50mts of voice call and whatsapping and chrome browsing on H+ (3G) network with 2G plan
4. how to factory reset the phone ( i tried using settings and hard keys- both failed) . when i released the power button the galaxy note 3 logo vanished and reappeared and went straight to boot. i dint get the menu to reset the data)
Please , please give ur valuable advices rather than redirecting me to some links which will redirect me to some never ending loops !! if someone from the geniuses have time, please help me through my facebook messenger or whatsapp
with lots of respect and love:good:
Dr.Anees Kurikkal
facebook.com/draneeskurikkal
+919946816899
Click to expand...
Click to collapse
Hello there ,
i would like to tell you that you can easily root your phone by kingo root. it is safe. dont forget ti on USB debugging.
and no way to reset knox counter. so better forget about that.
1. You can use towel root not sure if it still applies forgot the required date for it to work. CF root also works make sure its for your model nlsm-n900. Tried kingo root it also works.
2. No way to reset knox to 0x0 but that wont hurt your phone. You can install russian lollipop you can download it at sammobile again make sure its sm-n900.
If your phone is currently rooted you may want to use triangle away to reset binary then flash stock russian lollipop rom but it wont again changr knox to 0x0. You will then be able to do ota.
3. For battery normally a battery needs to be replace after a certain charge cycle and usually after one year but it really depends on how often and what you use the phone for.
4. While phone is off did you press volume up and home(not sure if required) and power buttom at the same time?
I dont usually use this since i have a reboot application option.
I can understand what you were been through so if you arent rooted go to towel root down load it ( press the button named make it ra1n ) this will root your phone and you dont have to worry about brick it again ... If you want to upadate your device you have to download odin is windows pc programm which can help you to flash stock roms or update your device ..
If you want to download official rom go to sammobile sign in and find your device .
About the battery problem you can do better with your phone so if you root you your note install greenify app from playstore , download gsam to see which app is draining your battery ,reboot your phone once a while
Sent from my SM-N910F using XDA Free mobile app
@drheart the shop person nay have flashed a custom rom.
Now you can flash a fresh rom via odin and get the rom from sammobile.com. also use the cf root method on xda for the rom that you will flash.
Sent from my SM-N9005 using Tapatalk
thank you so much guys. i just rooted with kingo !!! it worked as a charm. now the super user is asking to update binary ? what all things to be done next
1. about installing things like cwm,xposed and custom roms
drheart said:
thank you so much guys. i just rooted with kingo !!! it worked as a charm. now the super user is asking to update binary ? what all things to be done next
1. about installing things like cwm,xposed and custom roms
Click to expand...
Click to collapse
1. You have to update your binaries first (like in the pic attached). You will have to reboot then
2. Next step is READ XDA forum (about cwm, xposed and custom roms) and no hurry to flash anything if you aren't sure.
Joku1981 said:
1. You have to update your binaries first (like in the pic attached). You will have to reboot then
2. Next step is READ XDA forum (about cwm, xposed and custom roms) and no hurry to flash anything if you aren't sure.
Click to expand...
Click to collapse
thank you joku.
next step is installing cwm ryt ?
drheart said:
thank you joku.
next step is installing cwm ryt ?
Click to expand...
Click to collapse
It will be cool. Take a look: HERE.
Joku1981 said:
It will be cool. Take a look: HERE.
Click to expand...
Click to collapse
i installed the cwm succesfully . now after making a backup , i can flash custom roms , install mods etc ryt
drheart said:
i installed the cwm succesfully . now after making a backup , i can flash custom roms , install mods etc ryt
Click to expand...
Click to collapse
Yes, but follow the instructions carefuly :highfive:
Guys . I have rooted my device and has installed titanium and cwm. Everything has been backed up. I have an exynos variant ,india version and is currently on 4.4.2. As of now official lollipop is unavailable in india. I would like to install the russian lollipop. Have a few questions.
1. After installing the lollipop will i lose my root status
2. Can i install the kitkat version via odin if i ever want to revert.
3. Will it be possible to change the language fron russian to English
4. Finally if anything goes wrong and the screen show firmware update encountered an error ,what to do rather than panicking
Thanks in advance
First a general warning - from my experience and reading, a major cause for bootloops and phone issues is NOT doing a physical Download Mode. i.e. rebooting into DL mode or simply restarting and holding the keys. If you want to flash a new ROM (or Stock AFAIK) you must do a physical Download Mode. i.e. you take out the battery, wait about 10 secs, then put the battery back in and hold down Home+Down Vol+Power. Note you need to take out the USB cable BEFORE doing this.
Also, most people don't seem to know that even the latest batteries need to have recharge cycles done - every so often, at least once a month, make sure you run the battery down under at least 20% - lower is better. Also make sure you never take it to 0%. This is the single reason most laptop batteries fail 1 month outside the warranty - people leave them plugged in. It might seem a good idea to keep your phone charged always above (say) 60% but it isn't.
Journyman16 said:
First a general warning - from my experience and reading, a major cause for bootloops and phone issues is NOT doing a physical Download Mode. i.e. rebooting into DL mode or simply restarting and holding the keys. If you want to flash a new ROM (or Stock AFAIK) you must do a physical Download Mode. i.e. you take out the battery, wait about 10 secs, then put the battery back in and hold down Home+Down Vol+Power. Note you need to take out the USB cable BEFORE doing this.
Also, most people don't seem to know that even the latest batteries need to have recharge cycles done - every so often, at least once a month, make sure you run the battery down under at least 20% - lower is better. Also make sure you never take it to 0%. This is the single reason most laptop batteries fail 1 month outside the warranty - people leave them plugged in. It might seem a good idea to keep your phone charged always above (say) 60% but it isn't.
Click to expand...
Click to collapse
but that doesnt answer my question mate !
drheart said:
but that doesnt answer my question mate !
Click to expand...
Click to collapse
You're right... sorry about that.
1. After installing the lollipop will i lose my root status
If it is Stock firmware and you use Odin, yes. It will remove root, so you would need to do it again. Is there a reason you'd want stock rather than a custom ROM? I've used Alliance ROM and Temasek's CM12 and both are excellent, fast and smooth. Temasek's is not stock based but it is very nice to use. Alliance is probably the most customisable ROM I ahve seen that doesn't use Xposed or other 3rd party system to provide the ability to set it up how you want.
2. Can i install the kitkat version via odin if i ever want to revert.
You should be able to. I am unsure why you'd want to as so far, I am very impressed with LP, even the stock from Sammobile. I say 'should' only because I am unsure if the updated bootloader from the LP flash would support KK firmware.
3. Will it be possible to change the language fron russian to English
Yes. I have yet to see a ROM where you can't pick your language on startup.
4. Finally if anything goes wrong and the screen show firmware update encountered an error ,what to do rather than panicking
This is kinda answered in previous post about doing the physical boot to download - it's the only time I have seen issues coming from an Odin flash process - doing a restart into DL mode rather than pulling the battery to get there.
The other possibility is wrong PIT file or partition size. e.g. I had a Hong Kong S3 and had all kinds of problems trying to get a custom ROM onto it - managed it eventually but for a while I thought I'd only ever be able to use HK variants. So I'd make sure I have a firmware based on where your phone is from on my hard drive so if something DOES go wrong you can simply use Odin to flash that version.
hi guys, need help desperately (willing to send a few beer tokens via paypal if someone can help me sort this ASAP!!!)
since a recent auto update to 5.0 on my samsung S5 (uk on o2 network) im finding my bluetooth won't auto connect or store/save connections
i have tried clearing data and restarting, as well as deleting and re connecting but its not working
before, i would pair to my alpine car stereo and it would ask to save this connection and that was it, and everytime i turned the car on, it would connect without having to put in a code or anything
now, every single time i get into the car, it asks to pair, it asks to allow access to phonebook etc, the whole process takes ages, and it still doesn't connect perfectly as the bluetooth logo on the stereo constantly flashes, this is a huge problem for me, as i have 9 points on my driving licence, some of which for using my phone so any more and i lose my driving licence
about device
android 5.0
bandbase version g900fxxu1bod3
kernal version 3.4.0 - 4664691
se android status enforcing sepf_sm-g900f 5.0_0011 thur april 09 17:41:17 2015
security version mdf v1.1 release 4
vpn v1.4 release 3
anyone help? thanks very much
Full Factory reset since updating to Lollipop? Solves 99% of problems
To be honest, bluetooth not working is not really an excuse for 9 points for using your phone, you also have the option to not answer it when driving, or pull over first
---
EDIT - Try this too (You need to be rooted)
Open up build.prop in /system/ and edit this line
ro.securestorage.support=true
to
ro.securestorage.support=false
Reboot, set up your connections one more time, this time they should be saved and auto connect again, I have to do this for WiFI
*Detection* said:
Full Factory reset since updating to Lollipop? Solves 99% of problems
To be honest, bluetooth not working is not really an excuse for 9 points for using your phone, you also have the option to not answer it when driving, or pull over first
---
EDIT - Try this too (You need to be rooted)
Open up build.prop in /system/ and edit this line
ro.securestorage.support=true
to
ro.securestorage.support=false
Reboot, set up your connections one more time, this time they should be saved and auto connect again, I have to do this for WiFI
Click to expand...
Click to collapse
i already have 6 points for unrelated driving offences,and 3 for using a satnav (when parked in a layby but the copper says my indicators were on and assumed i was pulling out even tho i was parked up and stopped with hazards on, but i suffered it as it was my first 3 points at the time) and just don't want to risk it, i drive and get 100+ calls a day work related so its hard without handsfree
trying the above, will let you know what happens
did a full restore on my phone, and its done the same
not sure how to do much else with the phone, so if anyones willing to guide me through it il happily pay them for their time
thanks
Did you try the secure.storage trick?
Pretty sure that's the same issue, I don't use BT, but it refuses to save WiFi passwords after a reboot unless I edit that line and reboot
You don't need to offer money for help, that's what people are here for anyway
If you don't mind tripping KNOX, which basically nulls warranty outside of the EU, you can use CF Auto Root to root and then you'll have permissions to edit that build.prop file
*Detection* said:
Did you try the secure.storage trick?
Pretty sure that's the same issue, I don't use BT, but it refuses to save WiFi passwords after a reboot unless I edit that line and reboot
You don't need to offer money for help, that's what people are here for anyway
If you don't mind tripping KNOX, which basically nulls warranty outside of the EU, you can use CF Auto Root to root and then you'll have permissions to edit that build.prop file
Click to expand...
Click to collapse
all the above makes no sense to me
iv had the phone a year, so it might be out of warranty anyway, is it a simple task if i watched a youtube video?
all my wifi passwords are fine btw
Yea it's pretty straight forward few videos here
https://www.youtube.com/results?search_query=cf+auto+root+galaxy+s5
But if your WiFi passwords are saving fine it might not be that afterall... worth a shot I suppose though, having root is always good, if for nothing else you can block adverts system wide
Basically you need this file if you S5 is the G900F
http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip
And ODIN
https://mega.co.nz/#!Exo3yADS!y7pFS5-9RVhp4vDxTRAQARAwkjyQAB_9mDZWfXkLqko
Put the phone into download mode (Volume Down & Home & Power) from a powered off state - then volume up when prompted
Extract CF Auto Root
Load the extracted file into AP in ODIN, wait for it to say it's happy, and hit Start
It will root the phone, then reboot the phone
Tuesday
306sh activated with MVNO, SA300 firmware, rooted, with TWRP recovery,
working fine for past 2 months.
For unknown reasons, it decided last friday (at home, none to low signal) to do a system update
(from SA300 to S7232). Phone - on the desk- just "dinged" and msg came up "updating
system software". I attempted to cancel, but it didn't respond. Less than a minute later, "Update Successful" msg. Didn't reboot, anything, settings showed S7232 firmware. (SA300 before,
i had done my weekly backup earlier that morning).
Since then, phone constantly reboots at the "Aquos" screen; after an average 8 hours of rebooting, it will boot to setup, the talking setup screen. Works perfect for about an hour then rebooting starts again. Let battery die last nite, tried again this am - same thing rebooting.
TWRP backups don't fix problem- weekly backup, i have 6 i've tried, factory reset doesn't fix, if i try to Software Update, it checks, tells me, "up to date".
I turn on wi-fi to use the phone from home, , guessing it did a ? hit & miss ? ota update since the
wi-fi was off when it attempted the update. Home is a very minimal signal area.
Any way to force it to take the S7232 update again?
(I could update over wi-fi if i had wanted, only i didn't want the update anyhow).
thanks, rik
I can give you a link for a backup with latest firmware, you will have to wipe data tho
https://mega.nz/#!fkommKgJ!fkiaT_p8ZFOBzyJpUdNAqOZlTWpt-5hNuQ-2vvA5tSQ
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Stick firmware updates are not compatible with custom recoveries
sent from rooted 306sh
Just home, thanks
Hi,
Thanks for the help, just home from work (rough), so i will plug the
Aquos in tonite and hopefully be able to try the file tomorrow,
(that 8 hour boot thing), just downloaded your file, i'm ready.
This is my take-to-work personal phone, sprint zone, and i missed it today.
Your help is really appreciated.
rik
Final note
thought i'd just post to let you know the phone obviously had big problems
-- it failed to start today -- just buzz on buzz off -- even after 4 hours charging,
all i could get was the battery dead screen, wouldn't come on at all.
Guess the real problem was with hardware, i laid it away in the junk phone box
in the attic, end of Aquos Crystal.
rik
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
can you help me?
badbadri said:
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
Click to expand...
Click to collapse
can you help me dude? :crying:
im already download this firmware and confuse how to restore it
im looking for how to root my phone but always confuse
and finally i installed supersu on playstore and reboot
im waiting for 5 minutes and not booting, and im plug my phone to pc and the computer request for formating all my storage
and my phone can enter the recovery mode and i go to wipe data & factory reset, and still not work
can you send to my email?
my email is [email protected]
thx ..
Question: My 306SH would not update (still at S8216). Could use your back up to update my firmaware?
After 306SH ph was acting weird, did a hard reset & saw system Software updtd to S7232, & unk file in Misc (.eCtcQjbu1dgnvtFnvnr6yepTp1M=) I then installed Malwarebytes & scan detects this S7232 software update as malicious malware Android/PUP.RiskyTool.Agent.ay (dm.redbend) "/system/priv-app/fotaClient.apk". When going to System to do an manual update, Malwarebytes popups w/same msg every scan "Software App", even aft reboot 2days ago 7/12/2017. And phone wont let me create new google acct. An error that "google account mgr not working" popup & I see that same unk file reappears. Ph not rooted -XDA says "there's no root for 306SH that works">see XDA blog 'Root for Aquos Crystal 306SH ONLY'.
Go to the Sharp USA website for the 306SH firmware, and see what firmware you are on.
Download the firmware from the versions higher than yours, and if there is a repeat, notably "kernel.img", download the most latest version of it.
Then, plug your device into your computer, make sure you have the proper drivers installed for the Sharp Aquos Crystal installed on your computer. Boot your device into bootloader. Go to a terminal, cd to the directory where you downloaded your .img's from the website, and do
fastboot flash kernel kernel.img
Ex.
fastboot flash foo foo.img
And you can flash all the latest updates. When done, exit the terminal, make sure the device is unmounted, unplug from computer, and reboot your Crystal.
Hooray, it should be updated!
turkbot said:
I can give you a link for a backup with latest firmware, you will have to wipe data tho
(Mega-nz link expired)
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Click to expand...
Click to collapse
Turkbot, I hate to beg on my first XDA post, but is there any chance that you still have that ROM and is there any chhance that it's not TextNow loaded? I've got TWRP, Busybox, SuperSU, Xposed, and I've tried every which way to edit the prop, tweak it with modules, unlock etc (it even works with my Sprint MSL, but crashes when I try to manually set my MDN and MSID) It just says no SIM/no service and refused to give me any signal except for GPS and WIFI without one. Countless 'techs' over the phone and 3 different Sprint repair stores claim they don't have the stock firmware and Sharp actually claims that the reason they can't help me with the firmware is their contract with Sprint forbids it.. If you still have the file or a TWRP / Titanium etc backup you would be my savior.