Hello,
I had Alliance ROM and tried to flash Jasmine 5.0, but the phone restarted before it finished and now the phone only show either the "Samsung Galaxy Note 3" logo or download mode, recovery is gone.
When I try to enter recovery mode, the phone vibrates once and the screen stays black if i release the power button, but keep holding volume up and home.
If i dont release power, it keeps vibrating and a black screen.
I tried restoring to any possible image, MJE, NC2, NC4 and OB6, using Odin 3.09. All fail.
Tried using a Pit file, since the other error states that it cant find a pit file, that also failed.
Odin log is with Pit file:
ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUEOB6_N900VVZWEOB6_N900VVRUEOB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Without Pit file:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUEOB6_N900VVZWEOB6_N900VVRUEOB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone, it says the following:
odin mode
product name: sm-n900v
current binary: Samsung official
system status: official
knox kernel lock:0x0
knox warranty void:0x0
qualcom secureboot: enable (csb)
AP SWREV: S1, T1, R1, A2, P1
write proctection: Enable
UDC start (this is in red)
MMC: mmc_write fail
odin: flash read failure (This is in red)
That list is the same, no matter what.
Is anything else I can try or this phone just gone?
Please help!:crying:
Anyone??
NeoMorpheus1337 said:
Anyone??
Click to expand...
Click to collapse
Go to either a Verizon Company store or to Best Buy and go to the Samsung experts (at the Samsung section) and have them do a complete flash.
They can flash it to pure stock. There should be no issues since Knox and Warranty fuses are not blown
Just tell them it got knocked off the desk in the middle of an upgrade and the battery popped out.
Sent from my Note 3 via Tapatalk
Damn, thats a good advice and it didnt occur to me before.
I actually called Samsung and after talking to one of their techs, they recommended to send it to them.
Sadly, it will cost 80 bucks, but per one of the devs here, it does looks like a part of knox locked the storage and only a new motherboard can fix this.
Either way, 80 bucks is not that bad, given that the alternative is buying another phone for 250 or so.
Related
after flashing my gt-i9505 with odin (this file CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5). I reboted the phone and opened the superSU app. The only thing I could find in the app was the settings. Looked around a bit. A pop-up apeared , do you want do deactivare KNOX, i think i pressed yes and it said it as deactivated. I reboted the phone and now this screen apears. "firmware upgrade encountered an issue please select recovery mode in kies & try again"
the phone doesen't appears in KIES or the computer. ODIN finds it when i go into download mode on the phone.
what do I do now??
Reflash with Odin a ROM of your choice.
construidor said:
Reflash with Odin a ROM of your choice.
Click to expand...
Click to collapse
It dosn't work. I get fail everytime.
get this.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK4_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In the download mode it says this in the top left corner
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOW KERNEL: 0X0
KNOX WARRANTY VOID 0X1
CAB-CDBF1G-LS8:0X30
WRITE PROTECTION: ENABLE
eMMC BURST MODE enabled
I have reinstalled the usb drivers to.
Unhappy Unable To Root
I've tried the Kingo Root (Stays On An Endless Loop), Towelroot (Phone Not Supported Even When Changing The Other 3 Codes That Can Be Found On Google) And By Odin Watching A Thousand Tutorials And None Work, It's Frustrating And Exhausting, I'm sorry if there's another post for this but i got tired of searching and looking, hopefully someone will understand & try to help.
below is what appears in odin when I try to do it through that method...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen appears:
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: Enable
eMMC BURST MODE: Enable
you can find me on facebook at: facebook.com/PeaceBeyondEternity
if you find/know anything and can help me
skater-boy-zero said:
Unhappy Unable To Root
I've tried the Kingo Root (Stays On An Endless Loop), Towelroot (Phone Not Supported Even When Changing The Other 3 Codes That Can Be Found On Google) And By Odin Watching A Thousand Tutorials And None Work, It's Frustrating And Exhausting, I'm sorry if there's another post for this but i got tired of searching and looking, hopefully someone will understand & try to help.
below is what appears in odin when I try to do it through that method...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen appears:
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: Enable
eMMC BURST MODE: Enable
you can find me on facebook at: facebook.com/PeaceBeyondEternity
if you find/know anything and can help me
Click to expand...
Click to collapse
First off, the Odin method isn't working because CF-Auto-Root is designed for the I337M not the I337. We need more information about your device... head to Settings then About Device. Post the Baseband, the Build Number, Kernel Version,etc. or take a screenshot of it and post it here. Towelroot should work *if* you are on a current version of Android, and if your on MK2 you can use Saferoot.
I'm sorry but I'm not the most tech savvy person on this planet but I will do my best to explain my situation
Two nights ago my S5 got stuck on Samsung logo and has not done anything else since. I CAN NOT get it into Recovery Mode or Safe Mode.....only Download mode. After researching I decided to flash the stock firmware for SM-G900A. Downloaded the firmware from RapidGator. And downloaded Odin 3 v3.09. Also downloaded Keis3. First time I tried to run Odin, it told me PIT file was not found (or something like that). I'm not sure why I have to have the PIT file but I found it in a thread on XDA and added it to the PIT section in Odin.
This is the message screen on Odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
ODIN MODE
PRODUCT NAME: SM-G900A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV; S1, T1, R1, A2, P1
UDC START
MMC: mmc_read fail
SECURE CHECK FAIL : PIT
ODIN : flash read failure
Is there something that I am doing wrong? A step I'm missing? Or is my phone done for?
Any help would be really appreciated
UPDATE: tried flashing firmware again with PIT file and this is the message I'm getting now
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to root my phone for the first time. I saw a guide on Youtube and decided why not. It was relatively easy to follow and I am sure I followed it 100% correctly. I managed to see SuperSU, however, it failed to install the proper packages and would always tell me to reboot. Other problems I encountered were Google Play would not open, and every couple of seconds a service would stop working along with it. So I decided to un-root my phone. I found a factory version SM-G395PVPU2APC5, went into download mode, and as of right now it has been stuck here every since. I can alternate between download mode and boot mode but that's about it. I couldn't properly install the factory version because this message pops up every time I try:
ODIN MODE (HIGHSPEED)
PRODUCT NAME: SM-G395P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWAEV: B4(2,1,1,1,) K1 S3
SECURE DOWNLOAD: ENABLE
SW REV CHECK FAIL: [system]Fused 3 > Binary 1
On Odin it has a similar message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please, please help. I have looked everywhere for hours to try and find a solution. I have downloaded gigabytes upon gigabytes of different factory versions, I think I am going insane because of this problem.
Hi everyone,
I've been out of the android rooting world for a while now but I was sent a Galaxy s7 Edge from Samsung as part of their device insights program. I used it for six months as required and after that I tried to root it. Long story short I'm stuck in a bootloop. Cant get into recovery either, only download mode.
Download mode says:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935T
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICAL
FAP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B4(2, 1, 1, 1, 1) K1 S3
SECURE DOWNLOAD : ENABLE
SW REV CHECK FAIL : [system]Fused 3 > Binary 2
I attempted to ODIN back to stock and here is what happened
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
So does anyone know how I can just get back to stock?
mpalomba3 said:
Hi everyone,
I've been out of the android rooting world for a while now but I was sent a Galaxy s7 Edge from Samsung as part of their device insights program. I used it for six months as required and after that I tried to root it. Long story short I'm stuck in a bootloop. Cant get into recovery either, only download mode.
Download mode says:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935T
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICAL
FAP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B4(2, 1, 1, 1, 1) K1 S3
SECURE DOWNLOAD : ENABLE
SW REV CHECK FAIL : [system]Fused 3 > Binary 2
I attempted to ODIN back to stock and here is what happened
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
So does anyone know how I can just get back to stock?
Click to expand...
Click to collapse
I had the same issue. I changed the usb port i was using on my computer.
Update: Solved using Samsung smart switch program
SW REV CHECK FAIL : [system]Fused 3 > Binary 2
You were on ver 3 of the binary trying to odin a version 2 build. You can't go backwards, only same bl version or newer. The bl version is built into the build number. For example, G935TUVU4APK1 build the 4 designates the bl version. You can flash that over version 3 (what you were on) but none of the builds with a 2 in them would work. Hope that helps explain it.
Well I have no problem with the Nouggat Stock ROM but in fact I´m facing the same issue, so, do anyone have the unlcoked firmware in order to be free to use any sim in any country?
Thanks in advance.
Best regards.
Gowmi.
Ok this is the current and correct one.
https://theunlockr.com/2016/09/03/root-samsung-galaxy-s7-s7-edge/
Cheers.