Greetings.
I am sure there is an answer on XDA but an hour of Googling has got me stumped. Please point me to the right answer.
Starting point
Rooted N900T, stock rom, stock recovery.
What I did
Installed ROM Manager
Told ROM Manager to install the latest CWM for my phone. Completed with no errors.
Tried to boot into recovery with the standard "hold power, vol down, and home" but I could never get into recovery. It would look like it would start to boot into recovery then it would reset and boot into the regular ROM.
Then I told ROM Manager to reboot me into recovery.
Then it went badly... I am stuck in a boot loop that continuously shows going into recovery, then samsung logo, then repeat.
I have pulled the battery, tried to go into download mode, tried connecting USB, tried Odin.
What I want is a working phone. I would like to back up the stock rom and go to CM12 nightlies but for now I will just take a working phone.
Please help,
David
think I found the answer at http://forum.xda-developers.com/showthread.php?t=2666432
At least I got out of the loop, not fixed but progress.
That worked, the only other piece of info you might need if someone else has this problem is that there is no PDA button on the latest version Odin, it is called AP
Hello
I have a rooted G900H on the stock ROM with the stock recovery installed.
I was going to patch the core.jar using Lucky Patcher so I figured I should make a nandroid backup first, so I booted to recovery only to find out it was the stock recovery. I figured I would go back to normal and then figure it out from there.
I chose the 'reboot to system' option and the phone got stuck at the Samsung logo.
I tried removing the battery and when I booted it up it got stuck again.
I have tried choosing the 'power down' option then turning it on, booting it without the microSD card, rebooting using power and volume down, and removing the battery and replacing the battery with a spare I have but everything leads back to the same - stuck at the Samsung Logo.
I have also tried rebooting to bootloader which also leads to getting stuck at the Samsung Logo.
When I go into the recovery it comes up with the Android Bot with it's body open and "no command" very quickly, before getting to the system recovery.
The last thing I tried was clearing the cache partition then choosing the 'reboot' option. Again, stuck at the Samsung Logo.
On the system recovery it has "Android System Recovery <3e> LRX21T.G900HXXU1BOAD" in red at the top.
If possible, I would really like to avoid having to factory reset or flashing a ROM again.
Thanks
Boot to recovery and clear the caches, see if that gets you back in, if not, flash the same stock ROM over the top of that one, you'll only lose root
Thanks for the reply.
I have tried clearing the caches from the recovery and rebooting but it did not help.
How would I go about reflashing the stock rom without a custom recovery? And where would I get the file?
Thanks
sammobile . com & ODIN
All links and instructions are under the download on sammobiles firmware section of their site, just enter your S5 Model into the firmware section (Free account needed to download)
Or samsung-updates . com
Hey. Sorry, I forgot to reply. Your suggestion worked out. Thanks for the help.
I was able to go back then get a custom recovery. Thanks again./
Nice one
Hi,
I am trying to install open recovery on my note 4 n910c android 5.1.1, using odin and openrecovery-twrp-2.8.3.0-treltexx.img.
Odin says that the flash is successful, but when I try to reboot in recovery mode I obtain the green android and after that the laid down android with 'no command' message to finally ending up in the normal recovery mode.
I have tried several methods to flash it, I even tried to root the phone (I had boot loop and reflashed the stock rom).
Can anyone help.
Thanks in advance
Hello,
Did you have the autoreboot option UNCHECKED in Odin when you flashed the recovery? it must be unchecked, the device can not be allowed to reboot into system after flashing. After flashing with the option unchecked and you get the green pass, you have to manually boot the device to recovery with the button method, then you will keep the recovery, if you boot it to any other modes immediately after flashing then it reverts back to stock recovery, it requires booting directly to the recovery immediately after flashing, then it will be retained.
Hi,
Well it make sense, I had the reboot option ticked on. I actually went through another way by flashing the 5.0.1 bootloader which then allowed me to flash the custom recovery.
To be honest I am not sure whether or not I had the reboot option ticked on (my guess would be that it was as it's the default option in Odin).
Anyway, thanks for the tips I hope it will help others.
This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too
Hi All,
Got a S5 G900I here that's doing my head in! Stuck in the infamous bootloop at the Samsung logo.
I have been a long time reader of these forums and have prior experience from flashing Samsung phones but this one is driving me mad!
I can put the phone into Download mode without an issue, phone is detected in Odin and I can flash any firmware I try to it (Have tried original 4.4.2 , 5.0 and latest 6.0.1 firmwares from SamMobile). Odin goes through the entire process, reports as "Pass" but then the device goes straight back into the reboot loop and will never fully boot up.
I can also use Odin to push TWRP / CWM / PhilzTouch recoveries, however the device will never boot into the recovery partition. I get the blue "Recovery Booting" message briefly, then the device bootloops again.
Does anyone have any further suggestions to try and get this phone operational again?
I have tried multiple versions of Odin, multiple firmware versions, different computers, different USB cables, different USB ports etc.
I look forward to hearing back from you
Try this :
1. Make sure flash latest recovery with latest ODIN version. Check the official website.
2. Do not let your phone restart after flash recovery with ODIN. Un-check auto reboot on option tab in ODIN. After PASS flash recovery disconnect USB cable then ummm ... I do not know what about your phone .. Mine G900D, I just just pull the battery then I plug it again lol ..: D
3. It should be able to get into recovery after that. If not, it means the recovery type does not match your phone.
andra.soul.catcher said:
1. Make sure flash latest recovery with latest ODIN version. Check the official website.
2. Do not let your phone restart after flash recovery with ODIN. Un-check auto reboot on option tab in ODIN. After PASS flash recovery disconnect USB cable then ummm ... I do not know what about your phone .. Mine G900D, I just just pull the battery then I plug it again lol ..: D
3. It should be able to get into recovery after that. If not, it means the recovery type does not match your phone.
Click to expand...
Click to collapse
Have tried latest stock recovery and latest TWRP recovery using latest ODIN v3.13.1 as well as ODIN v3.09 and v3.10 - No difference whether I uncheck or check auto reboot either
Phone still stuck in a constant reboot loop and never gets to recovery
AS93 said:
Have tried latest stock recovery and latest TWRP recovery using latest ODIN v3.13.1 as well as ODIN v3.09 and v3.10 - No difference whether I uncheck or check auto reboot either
Phone still stuck in a constant reboot loop and never gets to recovery
Click to expand...
Click to collapse
It is important to turn off the phone right after flash recovery on the download screen. I mean really off rather than reboot. unplug the battery do not turn off with the power button. Because when rebooted, recovery will automatically return to stock .. so the recovery you just installed will be erased again. if stock recovery inside is broken you will get bootloop. if it is done and still can not enter recovery .. huum .. I am afraid if it's a hardware problem .. because it's easier to find a suitable recovery than its firmware. if recovery can not be in flash .... it's a long way to go ..
By the way, sorry for ask .. you release the power button when it says "recovery booting" with blue text.. right ..? while continuing to hold the volume up..?
andra.soul.catcher said:
It is important to turn off the phone right after flash recovery on the download screen. I mean really off rather than reboot. unplug the battery do not turn off with the power button. Because when rebooted, recovery will automatically return to stock .. so the recovery you just installed will be erased again. if stock recovery inside is broken you will get bootloop. if it is done and still can not enter recovery .. huum .. I am afraid if it's a hardware problem .. because it's easier to find a suitable recovery than its firmware. if recovery can not be in flash .... it's a long way to go ..
By the way, sorry for ask .. you release the power button when it says "recovery booting" with blue text.. right ..? while continuing to hold the volume up..?
Click to expand...
Click to collapse
Thanks for the quick reply.
Yes when I am booting into recovery mode and can see the blue text "Recovery Booting" in the corner of the screen I let go of the power button - device still boot loops.
Have flashed recovery then removed battery - still cannot get it into recovery.
I have seen some Samsungs have hardware issues with their NAND chips but in these cases there are a lot of errors relating to NAND displayed on the screen when I've seen it be a hardware issue. None of these appear on this phone - convinced it has something to do with software.
I found these threads - exactly the same issue as me, and at the end it says they fixed it by flashing a specific bootloader however I have a G900I and the phone in this thread was a G900F
https://forum.xda-developers.com/galaxy-s5/help/bricked-s5-sm-g900f-boot-to-recovery-t3280926/
https://forum.xda-developers.com/galaxy-s5/help/samsung-s5-sm-g900f-stock-flash-caused-t3771105
https://forum.xda-developers.com/galaxy-s5/help/bricked-s5-sm-g900f-boot-to-recovery-t3280926
Have tried countless different versions of ODIN / recovery / stock firmware , including the "service firmware with the separate files G900IDVU1BOE1_CL4826466_QB4839040_REV00_user_low_ship_MULTI_CERT"