Database Users

[Q] S4 wi-fi not active after update

Hello, it is 1 month that I bought the s4.
Until recently, no problem,
but after upgrading from 4.2.2 to 4.3 gave me problems to wi-fi..
wi-fi does not active,
I press to activate, but not active.
I already tried to do the factory reset but nothing is not working
pleas help me....!
IM ITALIAN :crying:

Have you flashed any custom roms on your device? Also what version is your S4? (I9500,9505...)
Sent from my Galaxy S4 with 4.4 KitKat

Remove battery for one minute and insert it again, go into download mode, then flash your firmware again. If this will not help then you must flash wifi fix for your rom revision (it is simply modem files only). sometimes when flashing 4.3 modem files do not stick/flash thats why your wifi is not working, you can check if it is true in system info where modem version is shown, if it is different than flashed firmware... thats why wifi is not working).
If helped please click thanks

how do I flash the single file of wi-fi?
I already tried to flash with odin the original firmware but it does not work
how do I flash the single file of wi-fi? :fingers-crossed:

Risk Guarantee after flash modem file?
After I make a flash modem file,the risk of Guarante, my s4?

Kumardeepak95 said:
After I make a flash modem file,the risk of Guarante, my s4?
Click to expand...
Click to collapse
dude if u have gurantee and u aint voided just take it to them they will fix it

No Signal after 4.4.2 update

Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
So I followed these instructions to flash the leaked 4.4.2:
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
Which all went well but I couldn't get Wifi after flashing, and (probably not important) but the default language it choose during the setup was Dutch??? Seeing as I couldnt get the wifi to enable I decided to flash Philz Touch Recovery v6 and then put Jamal's "S4 Google Edition - Final-R1.1" by putting it onto the SD card and flashing through Philz recovery.
Flashing went without a problem.... only thing is now I cant get Vodafone (UK) signal 80% of the time, the other 20% I do get signal and can make calls, just seems strange as previously 80% I WOULD get signal!
Did I do something wrong? I had a really bad feeling that flashing the CP, BL and CSC has somehow messed things up......please help!

Same problem, bump.

ColdIce23 said:
Same problem, bump.
Click to expand...
Click to collapse
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!

Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.

treesmoker said:
I just fixed the problem, ColdIce23, check your Baseband Version under Settings > About Device, I bet yours is still set to the original baseband version like mine was...
1) Re-Download the Baseband for the leaked 4.4.2 rom (Here)
2) Open Odin 3.09 and do the following:
Now I have FULL SIGNAL! .....so far..... will report back once I have left work but this is a good sign as I had no signal what-so-ever 5 minutes ago!
Click to expand...
Click to collapse
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?

kamrul.auntu said:
My I9505 baseband version is I9505XXUFNA5. Is not it the updated one?
Click to expand...
Click to collapse
Yes you the latest baseband available.

treesmoker said:
Hey Guys,
Today I updated my i9505 from Cynogen Mod 10.3.1 to the new "[AOSP] Official 4.4.2 - S4 Google Edition - Final-R1.1" by Jamal, but I read that you needed to update to the leaked 4.4.2 before flashing so that the modem and bits are upto date before flashing any 4.4.2 ROMs or else you could end up with no wifi after flashing.
/QUOTE]
I think u missunderstood something. For the Kitkat Google Edition u do not have to flash the leak before. Its only for the Samsung Touchwiz Version of Kitkat
tapatalked by an Echoenian
Click to expand...
Click to collapse

nikzDHD said:
Flasing a 4.4.2 Modem works well with the Kit Kat based roms. Two to choose from NA1 or NA5, depending on what bootloader your on flash the appropriate modem files.
I've got NA5 on the 4.4.2 GE Rom with Three and no signal issues as of yet.
Click to expand...
Click to collapse
I flashed the NA5 modem which seems to have failed the first time round, as it didnt actually change the baseband version in settings. Since flashing a second time (when it actual flashed properly) I now have full signal...... but I have another problem now:
When I click the dailer and select a person to call, the screen goes black and I dont see/hear any indication that a call has initiated. I tried with my wife and her phone rings and she can answer the call, but my screen is still black with no sound....
I have tried wiping data / davlik / cache and installing the rom from scratch, but I still get the same issue?
UPDATE:
Right so I just flashed CM11 as a test, and still can't make calls, so obviously not a ROM fault..... does the BL, CP or CSC have anything to do with the making calls procress?

I've got a similar issue.
I've got a M919V running Jamal's 4.3 GPE rom, but after flashing Jamal's 4.4.2 GPE i get no signal. After going into settings and selecting network the signal lasts, but after the screen goes off signal is once again lost.
Is there a procedure to follow that will fix this? This is found when when flashing many 4.4 roms.
-Thanks

Well, I get signal when I'm near a cell tower...
No changes tho. Still same problem.

Hi guys,
I'm wondering if you have resolved your modem problems?
I flashed to Jamal's 4.4.2 version 1.2 and I don't have a signal now.
I flashed the modem to NA5 but styill no signal. Also I can't even check my CSC using *#1234# as "Mobile network not available"
Any suggestions?
Thanks.

Hi Duskin,
For me, I think it's releated to the phone itself as I got a screen replacement. I haven't solved the problem yet because I got to get back to the store where I got my screen replaced.
Sent from my LG-P880 using Tapatalk

Problems going back to stock

Hi,
Was running CM11 on my GS4. I want to go completely back to stock however I'm hitting issues with it.
Downloaded the 02UK firmware file from Samware, flashed it in Odin, did a wipe before and after. Takes a while to boot in each time, sometimes needs a battery pull etc.
Now, I can load up fine - however no matter what I try, wifi won't turn on, a lot of the time signal will drop/ turn off when I lock the screen. Have tried flashing 4.2.2 as well, exactly the same and on the latest flash noticed as issue with the recovery, won't allow a data wipe/ partition in recovery, just flashes something red and then reboots.
I know this has probably been asked a milion times before. But hoping someone can help me get back to stock without the issues!
Thanks in advance.

aholloway21 said:
Hi,
Was running CM11 on my GS4. I want to go completely back to stock however I'm hitting issues with it.
Downloaded the 02UK firmware file from Samware, flashed it in Odin, did a wipe before and after. Takes a while to boot in each time, sometimes needs a battery pull etc.
Now, I can load up fine - however no matter what I try, wifi won't turn on, a lot of the time signal will drop/ turn off when I lock the screen. Have tried flashing 4.2.2 as well, exactly the same and on the latest flash noticed as issue with the recovery, won't allow a data wipe/ partition in recovery, just flashes something red and then reboots.
I know this has probably been asked a milion times before. But hoping someone can help me get back to stock without the issues!
Thanks in advance.
Click to expand...
Click to collapse
Mind giving as More information about this Phone? Such as Model,baseband,Stock roms your were trying to flash and Etc . Cuz we cannot help you If you were like " Help my Phone got No wifi etc." LOL If your asking for help atleast Provide us more Information and such . thank you.

Repulsa said:
Mind giving as More information about this Phone? Such as Model,baseband,Stock roms your were trying to flash and Etc . Cuz we cannot help you If you were like " Help my Phone got No wifi etc." LOL If your asking for help atleast Provide us more Information and such . thank you.
Click to expand...
Click to collapse
Yep - it's the i9505, baseband is 19505XXUBMEA and build number is JDQ39.I9505XXUBMF8.
Hope that helps, let me know if I have missed anything.
Thanks

aholloway21 said:
Yep - it's the i9505, baseband is 19505XXUBMEA and build number is JDQ39.I9505XXUBMF8.
Hope that helps, let me know if I have missed anything.
Thanks
Click to expand...
Click to collapse
Your having a signal issue because you need to flash a diffetent modem mate. And that should fix ur problem on signal issue . Do you mind booting into download mode and check if iy say the entry knox warranty void. Thanks
Sent from Hell ?

Currently 4.2.2 as I read the 4.3 update had caused some of these issues (although I want to be on stock 4.3.
I did notice after I posted that the baseband was for German phones (no idea how that got on there). So I flashed the a new modem and baseband is now at I9505XXUEMK8 which is supposed to be the correct one (if not please advise!?). However Wifi still not working. Tried the wifi fix file for the baseband, didn't work, also tried the root /data/misc/wifi/wpa_supplicant rename fix. Didn't work.
Are you able to tell me which Stock Rom/ Modem etc to flash or anything else to try??
Thanks in advance!

aholloway21 said:
Currently 4.2.2 as I read the 4.3 update had caused some of these issues (although I want to be on stock 4.3.
I did notice after I posted that the baseband was for German phones (no idea how that got on there). So I flashed the a new modem and baseband is now at I9505XXUEMK8 which is supposed to be the correct one (if not please advise!?). However Wifi still not working. Tried the wifi fix file for the baseband, didn't work, also tried the root /data/misc/wifi/wpa_supplicant rename fix. Didn't work.
Are you able to tell me which Stock Rom/ Modem etc to flash or anything else to try??
Thanks in advance!
Click to expand...
Click to collapse
Try to find the right Stock rom from here that base in your country mate and flash it via odin . Like i told you if you boot into download mode and check if there is knox void warranty? If you dont have that flash inly 4.2.2 stock rom but if you see that then feel free to flash a stock 4.3

Ok - So I have flashed the UK 4.3 BTU rom (Jss15J.I9505XXUEMKF) and have a baseband of I9505XXUEMK8 (which was the O2 one). Signal is fine no issues etc.
Still Wifi won't turn on though.
What do I need to do for this bit??
EDIT: As per your last post, I have no idea about Knox? I didn't see anything show up on download mode.
It also doesn't seem to be working now. The rom crashes when calls are received and wont dial etc. Ok - so should I go back and install the earliest 4.2.2 Rom version for 02 as the phone came with? Then update through OTA?

aholloway21 said:
Ok - So I have flashed the UK 4.3 BTU rom (Jss15J.I9505XXUEMKF) and have a baseband of I9505XXUEMK8 (which was the O2 one). Signal is fine no issues etc.
Still Wifi won't turn on though.
What do I need to do for this bit??
EDIT: As per your last post, I have no idea about Knox? I didn't see anything show up on download mode.
It also doesn't seem to be working now. The rom crashes when calls are received and wont dial etc. Ok - so should I go back and install the earliest 4.2.2 Rom version for 02 as the phone came with? Then update through OTA?
Click to expand...
Click to collapse
Well I told you if you dont have an Entry of Knox Warranty Void when you boot into download mode then flash the 4.2.2 Stock rom :S But you already flashed the 4.3 so you can no longer downgrade to 4.2.2 ... Can you please Dial *#1234# and write it down somewhere . and then Download this Wifi Fix and flash it Via odin and After reboot still did not work then Try to download and extract this file and Flash the .tar Via odin by selecting Phone/CP And if this file did not work after flashing then please feel free to play one of the wifi fix from Here Start's from MK9 until MKE might fix your issue.

Thanks for the help Repulsa. Will try that shortly and let you know the results!
EDIT - What about the Rom issues itself? I haven't had a chance to test everything, but I can't make calls. It calls the person but the screen freezes blank and then flickers. Should I reinstall the rom first or use another?

aholloway21 said:
Thanks for the help Repulsa. Will try that shortly and let you know the results!
EDIT - What about the Rom issues itself? I haven't had a chance to test everything, but I can't make calls. It calls the person but the screen freezes blank and then flickers. Should I reinstall the rom first or use another?
Click to expand...
Click to collapse
Do you mind dial *#06# if you have the right imei (dnt type ur imei here) and dial *#1234# and write it down here pls . And try to do a factory reset and wipe cache in rexovery before you flash anything.
Sent from Hell ?

Repulsa said:
Do you mind dial *#06# if you have the right imei (dnt type ur imei here) and dial *#1234# and write it down here pls . And try to do a factory reset and wipe cache in rexovery before you flash anything.
Sent from Hell ?
Click to expand...
Click to collapse
IMEI is the same, except for an extra /1 on the end?? Rest as follows;
AP I905XXUEMKF
CP I9505XXUEMK8
CSC I9505BTUEMK5
Tried everything from you earlier post except going through the final wifi fix versions. Nothing has worked so far though....

I'm in pretty much the boat.... I was using Omega ROM 4.3 but wanted to go back to Stock unrooted firmware.
I flashed Stock 4.3 (XXUEMKF to be precise - both Baseband and Build) using Odin 3.04
Now I cant turn wifi on
When I go into Download mode I dont have any KNOX lines and my Binary is Custom not stock!!!
Don't want to mess things up anymore than I already have by trying to flash everything under the sun!!!!
Back to using my faithful Note 2 for the time being then I guess!!!
Sent from my GT-N7100 using xda app-developers app

[Q] i9505 WiFi not working - tried ALL solutions (GNG8 baseband)

Hi!
Does anyone ever managed to fix not working WiFi on i9505 flashed to stock 4.4.2 with GNG8 and higher modems/basebands? On a daily basis i'm running CM11 but due to heavy GPS problems I decided to go to stock 4.4.2 (I9505XXUGNG8_I9505YXZGNH2_XEO).
Unfortunately I never managed to get WiFi fixed. I've tried everything I found on xda. And yes, i'm experienced Android user
What I've tried:
1. re-flash modem and NON-HLOS.bin files, tried multiple times - no success. Also tried single flash but from "hard power off".
1a. did factory resets, reflashed, rebooted and so on and so forth.
2. re-flashed all rom again - no success
3. re-flashed bootloader, also multiple times.
4. tried to edit build.prop and disabled "secure.storage" (switched do false) - no success
I've repeated every one step in a different order, like flashing modem, no auto reboot, flashing again, then flashing NON-HLOS etc. etc.
I have "Black edition" device so I hoped stock rom would fit perfectly. Ofcourse this stock is working better than CM11 latest on this machine - better battery life and better GPS operation, but no WiFi is a real pain.
Anyone have any clues what could be wrong?
Thanks,
Tomek

So just to summarize, Wifi works on CM but not on TW based roms?
tomeq_ said:
Hi!
Does anyone ever managed to fix not working WiFi on i9505 flashed to stock 4.4.2 with GNG8 and higher modems/basebands? On a daily basis i'm running CM11 but due to heavy GPS problems I decided to go to stock 4.4.2 (I9505XXUGNG8_I9505YXZGNH2_XEO).
Unfortunately I never managed to get WiFi fixed. I've tried everything I found on xda. And yes, i'm experienced Android user
What I've tried:
1. re-flash modem and NON-HLOS.bin files, tried multiple times - no success. Also tried single flash but from "hard power off".
1a. did factory resets, reflashed, rebooted and so on and so forth.
2. re-flashed all rom again - no success
3. re-flashed bootloader, also multiple times.
4. tried to edit build.prop and disabled "secure.storage" (switched do false) - no success
I've repeated every one step in a different order, like flashing modem, no auto reboot, flashing again, then flashing NON-HLOS etc. etc.
I have "Black edition" device so I hoped stock rom would fit perfectly. Ofcourse this stock is working better than CM11 latest on this machine - better battery life and better GPS operation, but no WiFi is a real pain.
Anyone have any clues what could be wrong?
Thanks,
Tomek
Click to expand...
Click to collapse

Lennyz1988 said:
So just to summarize, Wifi works on CM but not on TW based roms?
Click to expand...
Click to collapse
Yes, that's correct (whatever TW means) - wifi works on CM11 latest but not on stock 4.4.2. What surprised me most: after reverting back to CM11 from nand backup I noticed that i'm now on GNG8 baseband/modem that got flashed from stock, and this configuration works like a charm! GPS, WiFi, 3G/4G audio and data works great on first sight and few hours of testing.
So, this must be the problem with kernel and/or modules in I9505XXUGNG8_I9505YXZGNH2_XEO rom not the baseband/modem issue itself...
I think I would try another stock 4.4.2 (I9505XXUGNH2_I9505PLSGNH1_PLS) and see if it will resolve WiFi issue....
Greets,
Tomek

tomeq_ said:
Yes, that's correct (whatever TW means) - wifi works on CM11 latest but not on stock 4.4.2. What surprised me most: after reverting back to CM11 from nand backup I noticed that i'm now on GNG8 baseband/modem that got flashed from stock, and this configuration works like a charm! GPS, WiFi, 3G/4G audio and data works great on first sight and few hours of testing.
So, this must be the problem with kernel and/or modules in I9505XXUGNG8_I9505YXZGNH2_XEO rom not the baseband/modem issue itself...
I think I would try another stock 4.4.2 (I9505XXUGNH2_I9505PLSGNH1_PLS) and see if it will resolve WiFi issue....
Greets,
Tomek
Click to expand...
Click to collapse
The solution is that you have to flash the correct CSC (region code) for your device. You can know it installing this APP.

Joku1981 said:
The solution is that you have to flash the correct CSC (region code) for your device. You can know it installing this].
Click to expand...
Click to collapse
Hi, I think CSC setting is not the case. CSC should not interfere with WiFi operation at all.
When I flashed stock 4.4.2 XEO (i'm in Poland so XEO or PLS are good for me, phone was branded by PLS before) CSC in stock recovery was "Multi-CSC". Now it has changed to NEE for some reason. It happened after one of the re-flashes.
Despite that, with CSC set to NEE, CM11 is working perfectly with all features on GNG8 modem/baseband. Stock - no WiFi still.
Greets,
Tomek

Wifi off
Hello
I have the same problem with my samsung I9505, i am on Morocco and i m tried all solution no one work
AP : I9505XXUGNK4
CP: I9505XXUGNH7
CSC: I9505OXAGNK4

Aminest said:
Hello
I have the same problem with my samsung I9505, i am on Morocco and i m tried all solution no one work
AP : I9505XXUGNK4
CP: I9505XXUGNH7
CSC: I9505OXAGNK4
Click to expand...
Click to collapse
The firmware you are flashing is DBT (Germany). You can download it: HERE. In theory you have to have:
AP : I9505XXUGNK4
CP: I9505XXUGNK4
CSC: I9505OXAGNK4
Reflash that firmware 2 times for fix your device :highfive:

tomeq_ said:
Hi, I think CSC setting is not the case. CSC should not interfere with WiFi operation at all.
When I flashed stock 4.4.2 XEO (i'm in Poland so XEO or PLS are good for me, phone was branded by PLS before) CSC in stock recovery was "Multi-CSC". Now it has changed to NEE for some reason. It happened after one of the re-flashes.
Despite that, with CSC set to NEE, CM11 is working perfectly with all features on GNG8 modem/baseband. Stock - no WiFi still.
Greets,
Tomek
Click to expand...
Click to collapse
Just try what Yoku suggests.

Hi, I downloaded the firmware that you gave me, and I flash 2 times but without any results :/

Lennyz1988 said:
Just try what Yoku suggests.
Click to expand...
Click to collapse
I found the solution to WiFi and it is not connected with CSC setting (I still have NEE instead of XEO).
I managed to flash XEO firmware stock with WiFi finally working and enabled. This is just ridiculous and seems completely pointless and troublesome but.... :
1. turn off phone completly, some say that you just need to turn off by power button and then go to ODIN. I found that (by trying few times) it is mandatory to take out the battery not just powering off the phone by button.
2. put battery on, and enter ODIN mode (Vol Down + home).
3. flash, remember to untick "Auto reboot".
4. after successfull flash, again take out battery.
5. again, put battery on, enter ODIN mode.
6. flash, AND AGAIN remember: do not auto reboot! (untick "Auto reboot")
7. after successfull flash.... Yes - remove battery put battery on and enter RECOVERY mode this time.
8. instead of stock recovery menu it will show some progressbar going with green android and then it will reboot. Let him do so.
9. after reboot and settle down for minute or two, poweroff by removing battery.
10. enter stock recovery, now it will work and do Factory Wipe/reset. Reboot.
This procedure I found after maybe 10-15 reflashings. I think that crucial parts are: remove battery between every reflash and going to recovery at the end, two times.. other options i've tried didn't help at all.
I'm wondering why is that? Is it some kind of write protection (besides KNOX thing) that does not allow to simple flash/reboot procedure?
But still - I cant figure out why CSC is set to first from the list of available CSCs after that operation (NEE is first, there's some other possible CSCs and XEO at the end).
Greets,
Tomek

[Q] Wifi lost; Unique problem maybe.

Anyways as my title says, i don't have wifi. I had first rooted my phone, but then I unrooted my phone by flashing some unrooted os on the samsung which caused two problems. My wifi and mobile data didn't work at all, but after I took it to a repair shop they fixed the mobile data and got it working again and rooted my phone but not the wifi part. According to the person that tried to fix my phone, the current android os, 4.3 - jellybean, that i flashed via odin is preventing the wifi from working. I don't really know whats wrong with the phone but can anyone help me? Also by baseband version is 1337UCUFNJ4 and the build number is JSS15.1337UCUEMK2. Should i try to find a ROM that matches my baseband version and flash it via odin? Thank you in advance!
P.S. This is my first thread, so please tell me if i violated any rules.

aldrichk said:
Anyways as my title says, i don't have wifi. I had first rooted my phone, but then I unrooted my phone by flashing some unrooted os on the samsung which caused two problems. My wifi and mobile data didn't work at all, but after I took it to a repair shop they fixed the mobile data and got it working again and rooted my phone but not the wifi part. According to the person that tried to fix my phone, the current android os, 4.3 - jellybean, that i flashed via odin is preventing the wifi from working. I don't really know whats wrong with the phone but can anyone help me? Also by baseband version is 1337UCUFNJ4 and the build number is JSS15.1337UCUEMK2. Should i try to find a ROM that matches my baseband version and flash it via odin? Thank you in advance!
P.S. This is my first thread, so please tell me if i violated any rules.
Click to expand...
Click to collapse
im having the same problem and i think we both have knox stupid security back on the phone that's blocking the wlan to start from bad permission or encryption
so personally yeah i will install back the original firmware (before 4.3) from factory reset (or via odin if i have to force it) then im gonna re-root the phone
having back permission ill remove knox (probly with titanium) lock and box bs from base firmware and probly remove root right
then im guessing ill have my internet back now will i go full rom again or basic function thats a good question
so many freaking remote exploit lately
ill let you know if that fix it

I also just found this
om22 said:
1. untick "Auto reboot" in odin
2. flash the stock rom again
3. reboot your phone to download mode again (by holding the power and vol down button for 10 sec)
4. flash the stock rom a second time with auto reboot ticked
This will fix your problem.
Click to expand...
Click to collapse
seems that clicking auto reboot might be the cause

so would i install the I337_NJ4_Stock_Kernel.tar.md5 file following that method or would i have to find another firmware/rom/(i don't know what to call this) unrooted

aldrichk said:
so would i install the I337_NJ4_Stock_Kernel.tar.md5 file following that method or would i have to find another firmware/rom/(i don't know what to call this) unrooted
Click to expand...
Click to collapse
official did not work for me
i the flashed / reset to factory for Galaxy S4 SGH-I337M VLUAMDJ
rebooted and prayed but no luck
finally found a solution but that did changed my PDA version to 9505 but got everything working again
so if you dont mind the 9505 change (more rom and solution for 9505) id go with echoes for all in 1 fresh install solution and its a nice rom
Instruction can be found on this thread : http://forum.xda-developers.com/showthread.php?t=2372286
knowing the problem was modem i did also found this solution to re-flash and fix wifi on i337 without changing to 9505
Follow these instruction to stay i337 : http://forum.xda-developers.com/showpost.php?p=46762296&postcount=1
but i have not tested for i337
in the end i got this setup
rom echoes illusion kot 49h
kernel : 3.4.103-aelkernel-v6.2
bootloader and baseband i337mvlufnc1
pda :i9595v jughn2
hardware/ board : qcom/msm8960
platform / chip : msm8960 / apq9064
modem /board : mdm9215m
hope that help
and sorry for bad english http://cdn4.xda-developers.com/images/icons/icon8.gif
EDIT PS: These solution require basic knowledge with odin flash and cwm recovery or twrp recovery