Related
WARNING:
This update zip use write mot_boot_mode as shell script to run bootmenu,
don't modify it. otherwise, maybe you will get stop at M logo.
NOTICE: This update zip is ONLY for mb511, if you want to update, please check your stock rom.
If you use this update zip at charm(mb502), is unstable, mb502 and mb511 still has some different.
My STOCK ROM VERSION:
Code:
RUTEM_U3_01.14.16_DEBLUR_SIGNED_USARUTH15ND0RTINT056.0R_PDS000_USARUTHEHKTWEMARA_P011_A010_HWp3_1FF.sbf
If you try to call, but can't hear sound or can't registration of the carrier network, try this ROM version to update RC version.
RC version 5: v0.7.4
configure sources
NOTICE:If you want update fix zip, you should use bootmenu to update.When boot at motologo,click click and click "vol -" to enter bootmenu.
->because bootmenu executed by mot_boot_mode, so /system can't umount, only can remount.
--and update zip have to modify updater-script, remount /system.
[2013/11/13]:
last update:
Seems we can use the command of telnetd to do emergency rescue.
I write telnetd as shell script. It's only to execute bootmenu, if someone modify mot_boot_mode maybe cause bootmenu can't execute.
The telnetd will execute by eclair's init_mapphone30_umts.rc. But it's only can use bootmenu to execute adb to do some things (ex. modify mot_boot_mode).
These days, I try using 2ndboot, but still freeze on hbootmod, I don't know why we can't execute hbootmod.
I can't find anything solution, and can't get more message.
For me, it's hard to debug, I'm not kernel developer. I try to understand the source code of hbootmod, should stuck on do_branch.
But I still can't get any idea to solve this question.
Hope someone can complete it, let we can use new kernel.
RC version 5 should can be a stable version.
[2013/10/04]:
RC version 5:
Seems when I try fix camera, has incorrect modify of sensors. Fix incorrect modify.
write shell script /etc/init.d/07cphostapconf, copy /system/etc/wifi/softap/hostapd.conf to /data/misc/wifi/hostapd.conf
modify updater-script, clear /data/dalvik-cache. if already upgraded previous version update zip, should can direct flash RC5, skip double wipe.
[2013/09/26]:
20130926.zip:
I forget modify configure sources of buttonblink.sh.
old buttonblink.sh file will get bad battery life.
[2013/09/19]:
20130919.zip:
According to this, use smartass is more stable, thanks edgarsongla.
modify init.mapphone30_umts.rc, set smartass as default and delete cpufreq_interactive.ko.
[2013/09/18]:
for traditional chinese user:
fork tcime unofficial for flipout.
upload tcime.apk for flipout.
source code
[2013/09/16]:
baseband:
use and modify cyanogenmod4milestone's configure files of mmparts.
but I'm not do full test, should be ok.
reduce reboot times:
seems wakelock cause reboot, I guess.
these steps maybe can reduce reboot times.
disable wi-fi or don't set wi-fi sleep policy at never.
disable Android debugging.
but maybe still has reboot problem. I can't find solution.
[2013/08/28]:
camera:
use and modify CyanogenKobe's configure of libcamera.
fix part of camera. Take picture is normal, solved rotation 90 degree problem. But video recorder still rotation 90 degree.
wifi:
use stock rom's files.
media:
add libraries of 720p files. but 720p still has problem.
[2013/08/15]:
fix part of magnetic sensor, tested by google map.
modify lights code. when enter standby to check notification, if exist set buttons backlight on.
and if already standby when get notification, set blink and backlight on.
delete /system/etc/init.d/99buttonblink, modify /system/xbin/buttonblink.sh(for enter standby and exist notification use).
[2013/08/08]:
seems write to Android services will get bad use of battery.
so write to /system/etc/init.d/99buttonblink, to start service (check blinking of buttons backlight).
[2013/08/01]:
fix notification blinking of buttons(menu, home and back) backlight.
[2013/07/03]:
find the way to compile tiap_drv.ko
-->if get error, try this command then reboot.
Code:
cp /system/etc/wifi/softap/hostapd.conf /data/misc/wifi/hostapd.conf
modify overlay of auto brightness and notification LED.
[2013/06/26]:
use CyanogenModXT720's libaudio.so, ril should be normal.
use CyanogenModXT720's dsp directory.
get some kernel modules from CyanogenModXT720.
-->seems tiap_drv.ko can use, but still has problem, try to fix in next version.
[2013/06/23]:
define open keyboard of orientation by overlay.
modify BoardConfig.mk.
use cyanogenmod4milestone's apns-conf.xml.
use "mka bacon" to compile cm7.
separate gapps:
-->attachments gapps.zip for bootmenu use.
can work:
camera
battd
fmradio
bluetooth
gps
sensors
usb connect
audio
half work:
video
-> 720p has problem.
wifi
->I only use 2G service, so I can't test softap.
ril
->I only use 2G service, so I can't test 3G.
use mknod to replace mv /dev/xxx
[2013/04/01]:
resume original parameter in init.mapphone30_umts.rc
->symlink /dev /dev/netmux
I don't know why I deleted it...
modify /system/bootmenu/2nd-init/init.rc:
/mnt/sdcard -> /sdcard
modify void.fstab:
/mnt/sdcard -> /sdcard
delete /system/etc/init.d/02movedevice
fix sdcard mount question.
replace files by upload zip, and delete /system/etc/init.d/02movedevice. Or wait release new version.
fix in preview version 2.
In terms of audio recorder, following information may help:
Flipout uses Sample Rate '16KHz' or "22KHz" to record sound, NOT '44KHz'. This is why flipout cannot use skype >_<. If you guys are using a recorder that uses Sample Rate "44KHz" (which almost all recorders set as default Sample Rate), you have to change the setting.
No phone to test
>.<
Sorry guy I can't help
May be I can help to fix this bugs.audio,fmradio,sensors,camera,ril&wifi,look this:https://github.com/xn-Dream/android_device_motorola_sage-1,and you can pm me else.
Seems use mb508's libaudio.so can use video(low quality,landscape orientation) and audio recorder.
-- hard decoding still problem, can use some player (like mxplayer) to play with soft decoding.
-- Spirit FM will be no sound.
-- call phone number still no sound.
[2013/04/02]:recompile cm7 with mb508's libaudio.so
Now we can hear sound from the other side , but the other side can't hear what I say .
But use speaker it's no problem.
sim unlock problem
Hi, first thanks for do this ROM :good:
I install but when start now the system want to give a sim unlock code, I was use before so do u have any idea or something that i have to do to solve this problem
Sorry for my english is not my native language
Best regards
phchshow said:
Seems use mb508's libaudio.so can use video(low quality,landscape orientation) and audio recorder.
-- hard decoding still problem, can use some player (like mxplayer) to play with soft decoding.
-- Spirit FM will be no sound.
-- call phone number still no sound.
[2013/04/02]:recompile cm7 with mb508's libaudio.so
Now we can hear sound from the other side , but the other side can't hear what I say .
But use speaker it's no problem.
Click to expand...
Click to collapse
error log
about 3G
3gw.Service 7225 Mobile Network not connected - not roaming
about codec
Error TIOMX_CORE 2045 dlopen libOMX.TI.720P.Decoder.so failed because Cannot load library: load_library[1111]: Library 'libOMX.TI.720P.Decoder.so' not found
Info TI_Video_Decoder 2045 TI Video Decoder
Error OMXCodec 2045 Profile and/or level exceed the decoder's capabilities.
Error MediaPlayer 16597 error (1, -2147483648)
Error MediaPlayer 16597 Error (1,-2147483648)
Error MX.Player.Joint 16597 1st error: what=1 extra=-2147483648
Use 508 libOMX.TI.720P.Decoder.so put into system/lib
Error OMXCodec 2048 [OMX.TI.720P.Decoder] ERROR(0x80001009, 1)
I'm impressed that you finally got it working, but i have a evil kind of Bug around here!
The Play Store vanishes every Reboot, Titanium says it is Frozen and im unable to unfreeze it.
If i can i would provide a logcat in the next hours!
Anyway, awesome to finally see 2.3.7 on MB511 ^^
//EDIT: I connected the Device with the Internet, now it is working fine ^^
everything is working except that when phone reboot version is still 2.1 and nothing changed :/
adout keylayout:
unzip keylayout.zip
--init.mapphone30_umts.rc
--init_prep_keypad.sh
to /system/bootmenu/2nd-init/
chmod 0644 /system/bootmenu/2nd-init/init.mapphone30_umts.rc
chmod 0755 /system/bootmenu/2nd-init/init_prep_keypad.sh
Integrate to fix-20130413.zip.
phchshow said:
adout keylayout:
unzip keylayout.zip
--init.mapphone30_umts.rc
--init_prep_keypad.sh
to /system/bootmenu/2nd-init/
chmod 0644 /system/bootmenu/2nd-init/init.mapphone30_umts.rc
chmod 0755 /system/bootmenu/2nd-init/init_prep_keypad.sh
Click to expand...
Click to collapse
Is This QWERTZ?
Should be QWERTY.
There are two files, ruthp0-keypad.kl and ruthp1-keypad.kl.
use this command
"cat /proc/device-tree/[email protected]/[email protected]/name"
My device get ruthp1-keypad.
If you want to use QWERTZ, you can try replace ruthp0-keypad.kl, ruthp1-keypad.kl, ruthp0-keypad.kcm.bin and ruthp1-keypad.kcm.bin.
Get from QWERTZ version.
ShockBuddy said:
Is This QWERTZ?
Click to expand...
Click to collapse
Maybe can solved Turn on USB storage problem.
Integrate to fix-20130413.zip.
if replug usb, maybe has problem, use killall com.motorola.usb to reset usb.
Hi to all,
Thanks to all that are working on this rom.
Since both models are merged in the same post because the same hardware, I wonder if I can deploy this rom into a Motorola Charm, or if I got to make changes on code, I guess at least have to change some files where refers to 511 to 512, and where refers "Ruth" to "Charm".
What other changes should I do to make this model work?
Thanx for response.
Please help
Please help me, How do i do to work because i have not service,
The problem is SIM NETWOR UNLOCK PIN
Please HELP!!!!
just the key pad related files, I was unable to compile this ROM from source using charm files, I think an update file to replace keypad files with charm should do the trick.
I shall try it and let you know.
there are so many attachments here
please put them into #1
Great job, men!
netmanmac said:
Please help me, How do i do to work because i have not service,
The problem is SIM NETWOR UNLOCK PIN
Please HELP!!!!
Click to expand...
Click to collapse
I dont have the Issue and i haven't inserted any SIM Card, it should be enough to reboot without Sim Card.
If you get to Homescreen, use a Root Explorer and edit /system/build.prop, check if
Code:
keyguard.no_require_sim=xyz
is set to "false", if it isn't in there, add it!
Hope i helped :fingers-crossed:
finally installed.is the screen orientation working good?when i flip out the keyboard the screen orientation remains protrait,pretty annoying!anyway great job,never though i'd have seen cm on flipout!love this device,unlike any other
Hi Guys,
Has anyone tried the encryption feature found in Security settings? I'm using a recent nightly CM11 from Quarx/Blechd0se (Thanks, brilliant work!) quite stably for days now, but fail to make the encrypt phone function work...
When fully charged and USB powered, which are requirements, the successive encrypt phone buttons end up on a green android picture. This screen misses text and a progress bar which should normally appear on top of the screen, as seen on some screenshots. Even left for several hours, nothing progresses and a simple press on back button cancels action immediately which proves nothing has been encrypted in the meanwhile.
Took a Catlog and the only interesting message is the following:
Code:
01-02 01:34:23.732 E/Cryptfs ( 1197): Cannot get size of block device
In case it helps, find attached the output of mount command : View attachment mnt.txt
Could you have a look / help me out? (add to bug list if it applies)
In fact, for me, this function needs to be activated for connecting to my professional mails ...
Thanks in advance! :good:
Cheers
Further tested...
Hello all,
Just some more info... I flashed back to Quarx' CM9 and quickly tested once more the encryption and face the same problem but I didn't catlog, neither checked the mounts... Then I flashed Epsylon3's CM9 and quickly checked with the same result too...
But then I checked at catlog and now I get another type of error... Which is interesting and maybe promising as I already read some posts about this message...
Code:
04-14 21:11:13.101 E/Cryptfs ( 2219): Orig filesystem overlaps crypto footer region. Cannot encrypt in place.
Problem seems to be more general than only Quarx/Blechd0se's CM11 but a friend uses a CM9 flavor on a Samsung Galaxy S and has encrypted the phone successfully...
All in all it's linked with the filesystem (block device or not), how it is formated (yaffs/ext3/ext4) and mounted (mount/mount_all)...
Some interesting reading on jira.cyanogenmod.org/browse/CYAN-87 (not linked, I don't have 10 posts yet)...
Hope to find, test and come back with some more info soon...:fingers-crossed:
Cheers!
Hi, I have a Huawei Y625-U51 (Dual-SIM) running stock Android 4.4.2/EMUI 2.3 Lite and I would like to encrypt the device, but there are no Encryption options in "Settings > Personal > Security". Is there a way to make these options available or otherwise carry out a system encryption (i.e. using adb)?
Here's the about info to the device:
Model: HUAWEI Y625-U51
Android: 4.4.2
Secpatch-Lvl: 2015-11-01
EMUI: EMUI 2.3 Lite
Kernel: 3.4.0
Build-Number: Y625-U51V100R001C577B108
I already tried carrying out a factory reset but that didn't bring up the encryption options.
I'm well-versed with Windows/Linux system hacks but new to Android, so please bear with me. Any help would be greatly appreciated. Thx.
Encrypt Huawei Y625 via rooting and shell commands
After reading up a few articles on different ways to start encryption from the command line in various Android versions, I decided to experiment and got lucky. Here's what I did (if you want to repeat these steps I suggest you attach your phone to the charging cable first. Also remember that this will likely void your warranty bla bla ) :
rooted the Huawei Y625 using kingoRoot
installed Android Terminal Emulator and ran it
Once inside the terminal I entered
Code:
su
setenforce 0
vdc cryptfs enablecrypto inplace <YourPasswordInCleartext>
(I'm not sure whether the 'setenforce' command that sets SELinux to permissive mode is actually necessary. However, this will only change runtime mode, so you needn't worry that it may persist over reboots).
The screen then immediately went blank. I had forgotten to attach the phone to the charging cable so I scrambled to find it and finally got the phone attached. But it looked pretty much dead now.
After nothing happened for another while, I pressed the start button. The screen remained blank but I got to hear the familiar boot melody. After a while (maybe 2 or 3 minutes) I pressed start again. This time, a message appeared "Wait while your phone is being encrypted" plus a slowly increasing percentage.
* When the encryption had finished, the phone booted up as usual, only this time the familiar melody and splash screen was interrupted by the message "Type password to decrypt storage"
Minor drawbacks:
The boot process is interrupted somewhat uglily in the middle of the melody and splash screen to ask for the encryption password
TouchPal's data transfer agreement pops up every time you start to enter the decryption password (presumably because the answer is written to the /data partition which is still and encrypted and therefore not available yet at this point)
Bigger drawback:
There is no way to change the encryption password using the GUI. You have to run 'vdc cryptfs changepw <YourPasswordInCleartext>' from a shell (Result should be "200 0 0"). That's a bummer if you want to enable encryption for someone reliant on GUI apps.
One last note: this being Android 4.4.2 there is no way to encrypt the whole system. The method described above will encrypt the userdata partition (mounted as /data) only.
P.S.: Sorry for not sharing article and app links, but xda anti-spam settings prevented me as a new user from posting links. So sorry for the missing convenience, but I'm sure you'll be able to find the apps mentioned yourself and as for the articles - they were interesting but relating to wildly different Android versions with different command syntax, so you're propably better off just following the steps above anyway
Current status of my Note 3
Root,Unlocked bootloader,twrp recovery and the firmware is OF1.
The reason I think I need permissive mode is because I am having problems with trying to get linux deploy to work.
From reading some posts I have gathered that selinux might be the problem.
To get into permissive mode I need to replace the kernel I think, how is permissive mode done ?
thank you.
The phantomOne kernel ("hlte-vzw" version) seems to be permissive. You can use it with the AryaMod ROM if you like.*
There are kernel build-time configuration option(s) determining whether SELinux is (a) disabled, (b) alterable by kernel boot arguments (or post-boot changes), or (c) permanently enabled and immutable, and finally (d) either permissive or enforcing. In the case of (b) the default (absent a kernel boot command line argument) could be either permissive or enforcing.
Some of the above combinations are not used in practice - e.g. it makes little sense to be immutable and permissive.
In any event, you would have to see the kernel build configuration files to know what the exact setup was (or the kernel has /proc/config.gz enabled).
Typically a vendor will use "permissive" as a stepping stone towards getting full-up immutable, enforcing SElinux running without problems: the kernel will issue violation warnings without enforcing the SElinux constraints, so that kernel logs can be used to diagnose improper setups of SElinux execution contexts (domains) and filesystem extended attributes on a live testing system.
* I'm on NC4 bootloader; ymmv.
W T F no write access to ext sd card as default ?
still poking about trying to figure out why the linux install script's dont work.
I have discovered that as a default programs or apps dont have the permissions to write to the extsdcard . The extsdcard is read only. I think that actually is my problem.
where do I look to perminatly change my permissions on my extsdcard to 777 for all users and groups.
does android have somthing like an fstab file or mounting options ??
If it's any encouragement to you, I got the "Linux deploy" app to work on
AryaMod6.6 + phantomOne kernel (permissive SELinux).
I had similar troubles creating the initial container on the /sdcard, and I'm pretty sure that was just operator error because the interface is not intuitive and of course I completely failed to RTFM. So, maybe the container creation issue has nothing to do with SELinux at all.
Useful hint: with a default "linux" (==debian jessie ARM) profile container, the default username for all the services (httpd, sshd, vnc) is "android", and the initial passwords are found in two different places: under the "Settings" menu pick for httpd and telnetd, and under the little "inbox" icon menu for the profile for sshd and vnc. I had to use "apt-get install tightvncserver" to get vncserver up and running from the ssh command line. ("sudo /bin/bash" first).
I had to log in to the phone via adb and do a " netstat -n -a | grep 'tcp.*LISTEN' " to convince myself the various servers were up. That helped a bunch. httpd on :5080, telnetd on :5023, vncserver on :5901.
good luck, I struggled with it.
What are you going to use this for? I suppose if you have access to a full native-ARM Linux environment, perhaps it is easier to build native tools against libc without the constraints of bionic and the NDK?
bftb0 said:
If it's any encouragement to you, I got the "Linux deploy" app to work on
AryaMod6.6 + phantomOne kernel (permissive SELinux).
I had similar troubles creating the initial container on the /sdcard, and I'm pretty sure that was just operator error because the interface is not intuitive and of course I completely failed to RTFM. So, maybe the container creation issue has nothing to do with SELinux at all.
<SNIP>
What are you going to use this for? I suppose if you have access to a full native-ARM Linux environment, perhaps it is easier to build native tools against libc without the constraints of bionic and the NDK?
Click to expand...
Click to collapse
What I am trying to do is explore just how well I can really use this brilliantly wonderful device as my main computer. I have good reasons for this but there all related to my personal circumstances and I won't bore you with the details, sufice it to say that I am now living in a electricity/power scarce inviroment and a cell phone is about as power efficient as I can get and have reasonably powerfull hardware.
I had considered sbc's like the Rasb. pi but there are none that even come close to the capabilities of this phone.
GPS,wifi,cellular,acceleromiter etc.
In an Ideal world I could wipe android fully from the phone and load a distro of linux that fully supported all the hard ware of the note 3 giving me as fast and lean a computing enviroment to work with Or perhaps a duel boot configuration like grub boot either android or linux.
Phantom kernel and lss works great ..been going back and forth with the latest international roms since there's not too much happening on our Verizon forum.
Sent from my SM-N930F using Tapatalk
Hi Let me introduce tutorial, how to enable VoLTE/VoWiFi for some other carriers. All credits goes to @Airpil for his great work with enabling diag port for Pixel 2 phones and to @topjohnwu for his original Magisk project.
UPDATE:
Here is another way by @Vortuks , how to get things working.
Code:
https://github.com/stanislawrogasik/Pixel2XL-VoLTE-VoWiFi
ANOTHER UPDATE:
On Android 11 you can use module VoLTE_enabler_pixel_2_v1_1.zip, but you will myabe need to use SeLinux permissive module too.
BIG UPDATE:
use only on PIE
for android 10 use solution with PDC tool
I created new magisk module with everything needed for enabling VoLTE. Just install VoLTE_enabler_pixel_2_v1_1.zip and enjoy.
this will work only, if there is proper *.mbn for your provider
sometimes is needed to remove/add module after updating monthly updates
sometimes is needed to toggle off/on enhanced 4g LTE mode and go to airplane mode and back
Prerequizites:
your carrier have to support this feature
and you have to enable this feature on operator's side
PC with windows
you must have some luck
Prepare your PC:
google for QPST_2.7.474 and install it
install provided drivers (if they willn't work, google for better)
from provided nokia_mbn_files.zip find the right mcfg_sw.mbn for your carrier, if there isn't any mbn for your carrier, you can try another one, but without warranty
Prepare your phone:
backup everything, what you can especially EFS partition - just for sure
root your phone with provided Magisk.zip
boot up your phone
In Magisk Manager app find and install VoEnablermodule, restart phone
there will be new settings under Settings-Network & internet-Mobile network-Advanced
connect phone to PC and set to charge only mod
in terminal emulator run this commands (this will enable diagnostic port on phone):
Code:
su
setenforce 0
setprop sys.usb.configfs 1 && setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
Next steps:
find PDC tool from installed QPST and open
select device from drop-down menu, if it is empty, you will have to reinstall/choose another driver
click load button and find prepared mcfg_sw.mbn file
now right-click on new loaded profile and select SetSelectedConfig - Sub0
and now button Activate
activate provided VoEnabler module via MagiskManager
restart device
and now, if you are lucky one, your VoLTE is working :victory:
Final steps:
if everything is working, you should reinstall original Magisk from twrp
Troubleshhoting:
99,9% of all problems comes with wrong driver
open windows device manager and try to choose another driver for HW like:
Qualcomm HS-USB Modem 9091
Qualcomm HS-USB Diagnostics 9091
Qualcomm HS-USB WWAN Adapter 9091
Is it working?
dial *#*#4636#*#*
Phone information-3dots-IMS service status
If IMS Registration: Registered and Voice over LTE: Available you won
after update with factory images you will have to re-do this steps
Confirmed carriers:
Czech T-mobile
VoLTE - yes
VoWiFi - no
Poland Orange(confirmed by @saperkus)
VoLTE - yes
VoWiFi - yes
Poland Play(confirmed by @saperkus)
VoLTE - yes
VoWiFi - yes
Telenor Bulgariawith Telenor Danemark mbn (confirmed by @pavel5044)
VoLTE - yes
VoWiFi - no
T-Mobile Hungary (Telekom)(confirmed by @hunfatal)
VoLTE - yes
VoWiFi - no
Downloads:
Code:
Drivers:
[url]https://mega.nz/#!oMEHTIbA!0g7ahr8r81Q3ue8LpEy-sfd7FTLEEQlGRi2CJfG_Kq0[/url]
somin.n said:
Hi Let me introduce tutorial, how to enable VoLTE/VoWiFi for some other carriers. All credits goes to @Airpil for his great work with enabling diag port for Pixel 2 phones and to @topjohnwu for his original Magisk project.
Prerequizites:
your carrier have to support this feature
and you have to enable this feature on operator's side
PC with windows
you must have some luck
Prepare your PC:
google for QPST_2.7.474 and install it
install provided drivers (if they willn't work, google for better)
from provided nokia_mbn_files.zip find the right mcfg_sw.mbn for your carrier, if there isn't any mbn for your carrier, you can try another one, but without warranty
Prepare your phone:
backup everything, what you can especially EFS partition - just for sure
root your phone with provided Magisk.zip
boot up your phone
In Magisk Manager app find and install VoEnabler module, restart phone
there will be new settings under Settings-Network & internet-Mobile network-Advanced
connect phone to PC and set to charge only mod
in terminal emulator run this commands (this will enable diagnostic port on phone):
Code:
setenforce 0
setprop sys.usb.configfs 1 && setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
Next steps:
find PDC tool from installed QPST and open
select device from drop-down menu, if it is empty, you will have to reinstall/choose another driver
click load button and find prepared mcfg_sw.mbn file
now right-click on new loaded profile and select SetSelectedConfig - Sub0
and now button Activate
and now, if you are lucky one, your VoLTE is working :victory:
Final steps:
if everything is working, you should reinstall original Magisk from twrp
Troubleshhoting:
99,9% of all problems comes with wrong driver
open windows device manager and try to choose another driver for HW like:
Qualcomm HS-USB Modem 9091
Qualcomm HS-USB Diagnostics 9091
Qualcomm HS-USB WWAN Adapter 9091
Is it working?
dial *#*#4636#*#*
Phone information-3dots-IMS service status
If IMS Registration: Registered and Voice over LTE: Available you won
Downloads:
Code:
Drivers:
[url]https://mega.nz/#!oMEHTIbA!0g7ahr8r81Q3ue8LpEy-sfd7FTLEEQlGRi2CJfG_Kq0[/url]
Click to expand...
Click to collapse
Hi I am stuck at the terminal emulator step.
when i type in "setenforce 0" the terminal says "couldn't set enforcing status to '0' invalid argument"
i tried googling and tried some stuff but no luck.
Note: Is there something to do with the kernel coz i am on Sultan Kernel and not sure if its build for only enforcing or only permissive.
please get back to me ASAP.
thankyou
royroyal said:
Hi I am stuck at the terminal emulator step.
when i type in "setenforce 0" the terminal says "couldn't set enforcing status to '0' invalid argument"
i tried googling and tried some stuff but no luck.
Note: Is there something to do with the kernel coz i am on Sultan Kernel and not sure if its build for only enforcing or only permissive.
please get back to me ASAP.
thankyou
Click to expand...
Click to collapse
Hi, yeah, my mistake :angel: You have to use "su" command first to allow root access. Full command is:
Code:
su
setenforce 0
setprop sys.usb.configfs 1 && setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
And please, don't quote full first post
somin.n said:
Hi, yeah, my mistake :angel: You have to use "su" command first to allow root access. Full command is:
And please, don't quote full first post
Click to expand...
Click to collapse
Yes sorry for replying over the OP.
Yes i knew already to use "su" inorder to grant supersu access, but this didnt work for me and i am not able to proceed. Husssshh..
royroyal said:
Yes sorry for replying over the OP.
Yes i knew already to use "su" inorder to grant supersu access, but this didnt work for me and i am not able to proceed. Husssshh..
Click to expand...
Click to collapse
Hmm, should work? Try to write it, not copy... Try the other command without changing enfonforcing, it is maybe not necessary.
somin.n said:
Hmm, should work? Try to write it, not copy... Try the other command without changing enfonforcing, it is maybe not necessary.
Click to expand...
Click to collapse
Tried to write as well as copying, also tried without the 1st command but no luck.. and as no one has tried this yet aslo not able to know if this is happening with my device only.
royroyal said:
Tried to write as well as copying, also tried without the 1st command but no luck.. and as no one has tried this yet aslo not able to know if this is happening with my device only.
Click to expand...
Click to collapse
Interesting try to restart your phone, open windows device manager, connect phone (now should be detected some new hw), open terminal and write commands and look, if some new hw was detected or if you have some new unknown devices in device manager. You should also look to Airpil's thread for some help.
Code:
[url]https://forum.xda-developers.com/pixel-2-xl/how-to/guide-qxdm-port-activation-pixel-2-xl-t3884967[/url]
somin.n said:
Interesting try to restart your phone, open windows device manager, connect phone (now should be detected some new hw), open terminal and write commands and look, if some new hw was detected or if you have some new unknown devices in device manager. You should also look to Airpil's thread for some help.
Click to expand...
Click to collapse
Will try this and update here
Successfully enable volte on my pixel2,Thanks!
Please provide carrier details in your post guys! With that being said, has anyone got it to work on Straight Talk (Verizon or ATT sim?)
Enable VoLTE for Vodafone in India
Vodafone in India has not provisioned the Pixel 2 till yet for VoLTE despite many people getting after them. A lot of noise was generated by users when Google pointed out that they had done what was required in the Android Pie updates.
Many thanks for this guide as it has helped me to enable VoLTE on my Pixel 2. On checking with *#*#4636#*#* it shows that VoLTE is now provisioned for voice. I now need to connect to any other phone where VoLTE is working and see if it indeed connects using VoLTE.
The only problem I had was in opening the port before using QPST. I had to type in the commands a second time in the terminal and then the port opened allowing me to proceed.
almightysiman said:
Successfully enable volte on my pixel2,Thanks!
Click to expand...
Click to collapse
Hi,
did u do it over the stock rom/kernel or on any custom kernel.
and can u post every step that u did to get it done.
currently i m on pure stock 9.0 pie with locked bootloader on february security patch.
this is my previous comment over the thread..
Hi I am stuck at the terminal emulator step.
when i type in "setenforce 0" the terminal says "couldn't set enforcing status to '0' invalid argument"
i tried googling and tried some stuff but no luck.
Note: Is there something to do with the kernel coz i am on Sultan Kernel and not sure if its build for only enforcing or only permissive.
royroyal said:
Hi,
did u do it over the stock rom/kernel or on any custom kernel.
and can u post every step that u did to get it done.
currently i m on pure stock 9.0 pie with locked bootloader on february security patch.
this is my previous comment over the thread..
Hi I am stuck at the terminal emulator step.
when i type in "setenforce 0" the terminal says "couldn't set enforcing status to '0' invalid argument"
i tried googling and tried some stuff but no luck.
Note: Is there something to do with the kernel coz i am on Sultan Kernel and not sure if its build for only enforcing or only permissive.
Click to expand...
Click to collapse
I am on du rom.you should type su before setenforce 0
Hadookie said:
Please provide carrier details in your post guys! With that being said, has anyone got it to work on Straight Talk (Verizon or ATT sim?)
Click to expand...
Click to collapse
I'm back overseas now, but while I was home for the holidays I used a Straight Talk ATT sim and had no problems using the MagiskHide Props module to manually add the lines from this module:
https://forum.xda-developers.com/apps/magisk/module-v4-volte-enabler-t3649613
It was somewhat inconsistent though. Seemed to only work with certain people I called. Also, I use Google Voice when I'm home, so that may account for the inconsistency.
I haven't tried the method outlined by the OP, though. I've had a solid setup for months now and I'm a bit hesitant to try anything that might kink it up.
Edit:
Now that I think about it, I never checked the IMS Registration to be sure, so I can't be sure if it was actually working, but it would show the "HD" calling icon on the dialer screen when connected, so I just assumed it was working.
Thank you for sharing this guide.
I can confirm, that VoLTE and VoWiFi is working fine in Orange Poland and PLAY (Poland). In case of PLAY, both services are disabled by default. You have to contact with service provider and ask them to enable WiFi Calling. By enabling it, VoLTE will be also enabled.
saperkus said:
Thank you for sharing this guide.
I can confirm, that VoLTE is working in Orange Poland and VoLTE and VoWiFi is working in PLAY (Poland). In case of PLAY, both services are disabled by default. You have to contact with service provider and ask them to enable WiFi Calling. By enabling it, VoLTE will be also enabled.
Click to expand...
Click to collapse
Any chance to get WiFi calling working on Orange PL?
And will this work at all on OG Pixel?
bige93 said:
Any chance to get WiFi calling working on Orange PL?
Click to expand...
Click to collapse
It seems, that I haven't been patient enough in case of Orange PL... I have redone the tests and was able to make VoWiFi to work. There's a need to reboot the device after swapping SIM cards. After reboot, VoWiFi works fine.
bige93 said:
And will this work at all on OG Pixel?
Click to expand...
Click to collapse
You're free to check it. I've checked on Nexus 5X and it didn't work at all.
saperkus said:
It seems, that I haven't been patient enough in case of Orange PL... I have redone the tests and was able to make VoWiFi to work. There's a need to reboot the device after swapping SIM cards. After reboot, VoWiFi works fine.
You're free to check it. I've checked on Nexus 5X and it didn't work at all.
Click to expand...
Click to collapse
Do I have to use some special ("diag") version of the Magisk as it says it the 1st post? Can't find 'magisk diag' for Sailfish.
bige93 said:
Do I have to use some special ("diag") version of the Magisk as it says it the 1st post? Can't find 'magisk diag' for Sailfish.
Click to expand...
Click to collapse
This is a modded version of Magisk, which gives an ability to enable diagnostic port (normally it can't be enabled). It was prepared for Pixel 2 XL, but it also works fine with Pixel 2. I can't tell, if you need to use this version or not. Install standard Magisk version and check if you can enable this port using provided commands. If not, then it's up to you to decide, if you want to check modded version of Magisk or not.
Has anybody tried to install the modified Magisk on android Q Beta yet? I am getting error 1, it doesn't install