Hi,
i am stuck at LG logo, have instaled this BUMPed TWRP, but i cant get into it.
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
It´s because I can´t manage to do the vol dwn + power button combo properly. I´ve been trying this for 2 hours already and I had hard time doing it even before, when my phone worked.. (more than 50 attempts... )
So at first i had TWRP 2.8.6.1 and Resurrectionremix ROM with LP, then i wanted to flash SRK ROM and after instalation of it my recovery didn´t work so i had to flash the bumped one.
SRK ROM - http://forum.xda-developers.com/lg-g2/development/rom-srkrom-2-1-16-3-2015-t3055927
Everything worked fine, but the SRK ROM was lagging.
But now i decided to come back to Resurrection remix (because of those lags) and flashed the newest version 5.4.4. after that i got stuck at LG logo. If I connect my prone to computer at the splash screen, it recognises LG G2, but I can´t do anything.
Is there any way i can enter TWRP without doing that buttons combo? Or can i install stock KDZ file with LGflashtool via download mode without bricking my device, when i have bumped twrp?
Thank for any help.
I'm not an experienced user, you should wait for confirmation by other user(s).
Afaik Resurrection Remix needs Jellybean bootloader, therefore you had to flash the "back to KK" patch from SRK thread.
Normally it is possible to enter recovery also with ADB (sending commands from computer to phone), but I don't know if its possible in your case.
Personally, I have flashed .kdz files via LGflashtool 2014 using CSE flash many times without any problem (D802 with bumped TWRP by blastagator).
That´s the problem i want to use adb, but i can not get into TWRP.
Anyway I just tried to use LG flash tool, downloaded drivers + KDZ file and used CSE flash. Verification of phone was completed and upgrading started but then i get popup with no connection to server. Just to clarify my internet connection works fine.
Btw. there is 4% completed behind the popup.
Edit: A lot of people on xda wrote, that this LG flash tool has some difficulties with extracting KDZ files larger than 1Gb, that might be it. But it worked for you...
I found a post in a german android forum about the "connection so server failed". A user stated that he used a usb port located directly on the mainboard (not front) and just ignored the connection error notification. So just don't close the popup window. Also use the original cable of the G2.
Afair there is also a progress bar on the phone, keep an eye on it.
Hmm i've never read about problems with .kdz >1GB. Unfortunately every G2 .kdz is 1,5GB+.
OK, right now I feel like I am totaly dumb and missing something really obvious.
Everytime is my phone at 0% but LG flash tool displays 4% and this TYPE_WPARAM_UPGRADE_ERROR pops up, always same error even with different settings.
Code:
22:55:14 : Start Date : 2015-05-19 22:55:14
22:55:14 : ---------- QM CSE Testmode ---------
22:55:14 : ---------- CSE mode ---------
22:55:14 : ***** Check Tool Version *****
22:55:14 : Tool version : 1.6.9.0
22:55:14 : UpgradeDLL version : 2.1.5.0
22:55:14 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:55:14 : LGE USB Driver Version :
22:55:14 : Android PDLV Version :
22:55:14 : Android NDLV Version : 3.12.0.0
22:55:14 : ******************************************
22:55:14 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:55:14 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
22:55:14 : SetEmerModeAT()
22:55:14 : *****CheckOS Start********
22:55:14 : Microsoft_Windows7_Professional_Service Pack 1
22:55:14 : *****CheckPCSyncPrograms Start*****
22:55:15 : PCSyncPrograms Not Found - OK and ready to upgrade
22:55:15 : Verifying phone connection...
22:55:15 : dwWaitResetTime(40000 ms)
22:55:16 : _IsConnectedPhone Call
22:55:23 : _IsConnectedPhone(2)
22:55:23 : 0 - NotConnected.
22:55:23 : 1 - Normal connect success
22:55:23 : 2 - Emergency connect success
22:55:23 : Phone Mode(2)
22:55:27 : Skip Backup and Restore - CSE mode.
22:55:27 : *****CheckPCSyncPrograms Start*****
22:55:28 : PCSyncPrograms Not Found - OK and ready to upgrade
22:55:29 : ****************CheckAndDownload********************
22:55:29 : Version :
22:55:29 : ******Extract Start C:\Users\Dell\Downloads\D80220B_00.kdz*****
22:55:29 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
22:55:29 : Check 2G-4G big size kdz file..
22:55:29 : Extract 2G-4G big size kdz file..
22:55:29 : NNNNN WDB FullPath(C:\Users\Dell\Downloads\D80220B_00.kdz)
22:55:29 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:55:29 : Extract End C:\Users\Dell\Downloads\D80220B_00.kdz
22:55:29 : 01 Skip delete kdz 1.1 file...
22:55:29 : ------------------Model.dll Information-------------------
22:55:29 : Filename : LGUP_8974.dll
22:55:29 : Version : 0.3.10.0
22:55:29 : File size : 1498624
22:55:29 : File date : 2015/05/19-22:55:29
22:55:29 : PC Created date: 2015/05/19-22:55:29
22:55:29 : ----------------------------------------------------------
22:55:29 : *****Check LGCM Programs Start*****
22:55:29 : LGCM Programs Not Found - OK and ready to upgrade
22:55:29 : m_pLGCyonUpdate status change.
22:55:29 : *****WorkModelDLL Start*****
22:55:29 : strPhoneBinaryPath(C:\Users\Dell\Downloads\D80220B_00.kdz)
22:55:29 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:55:29 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:55:29 : _DetachDLL Call
22:55:34 : _DetachDLL Call End
22:55:34 : Call fn_StartUpgrade
22:55:34 : Phone mode change -> CSE
22:55:34 : ********* CDMA Model.dll input Parameter *************
22:55:34 : MODEL_EVENT : 32769
22:55:34 : PhoneBinaryPath : C:\Users\Dell\Downloads\D80220B_00.kdz
22:55:34 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:55:34 : BootWaitTime : 49500
22:55:34 : UsbHighSpeed : FALSE
22:55:34 : PhoneMode : 4
22:55:34 : NewPhoneBinVersion : D80220B_00
22:55:34 : ClearSI : FALSE
22:55:34 : AuthMark : 0
22:55:34 : ********* CDMA Model.dll input Parameter End*************
22:55:55 : wParam : 100, lParam = 72
22:55:55 : MODEL DLL Event : (100, 72)
22:55:55 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:55:55 : CleanModelDll() : Free Model.dll
22:55:55 : _DetachDLL Call
22:56:00 : _DetachDLL Call End
22:56:00 : Page_Error şÎşĐŔÔ´Ď´Ů
22:56:00 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
It doesn´t matter if I use LGFlashTool2014 or UpTestEX tool with windows enabler. Unfortunately i don´t have original LG cable anymore, but i tried to use 3 another different cables and 2 computers (laptop and desktop computer with usb port located on the mainboard - both running win7).
Any further ideas?
I would download the .kdz again (might be corrupt) oder try another .kdz.
In another forum, it is suggested to rename the file to simple name like "a.kdz" and put it on top of the partition (C:\a.kdz).
You also should try newer driver, because afaik the ones in in the kdz how to thread are a little bit old.
Also you could try the TOT method.
Solved
Finally my phone is working again :highfive: :victory:
I read about TOT flash few days ago but didn´t want to use it, because I wasn´t sure if I have right TOT file for my phone, but it was my last chance and it worked on 1st try.
I used 4 or 5 types of KDZ files before (a/b and jellybean/kitkat), so that was not the issue, and had lastest drivers. After a little bit of research on xda and google I found out, that it´s kind of bug in LG software when it comes to overwriting bootloader files and I can´t do anything about it, so the only way solve my trouble was to flash TOT file.
Related
Just flashed my D802 with CM11 (todays nightly), gapps-kk-20140105-signed gapps, furnace kernel and Jishnus camera through TWRP 2.6.3.3.
After flashing my phone it stuck at the LG logo, and didn't boot into CM11. It had lines all over the screen so I held down the power button and it rebooted into CM11. But then I saw that I had these lines all over the right side of my screen, kind of like the attatched picture.
I panicked and flashed 10F using LGMobile Support Tool and now my phone is in a boot loop at the LG logo and I don't know how to get it working again. Any help please?
I've tried to boot into download mode by holding down the power button until it reboots and then quickly holding down volume up but it just goes to the boot loop again.
Hold down power button and volume button till lg logo appears. Release both buttons and immediately press them again till you arrive at the white screen for factory reset. Try it.. In case there's a custom recovery on the phone it will load it. In case it's stock recovery you're doing a factory reset which might help. If this isn't working try to get into download mode (don't forget to use the USB cable to get into it as far as I remember..) and flash again or flash custom recovery plus cm11 again but without custom kernel!
Lazy79 said:
Hold down power button and volume button till lg logo appears. Release both buttons and immediately press them again till you arrive at the white screen for factory reset. Try it.. In case there's a custom recovery on the phone it will load it. In case it's stock recovery you're doing a factory reset which might help. If this isn't working try to get into download mode (don't forget to use the USB cable to get into it as far as I remember..) and flash again or flash custom recovery plus cm11 again but without custom kernel!
Click to expand...
Click to collapse
I just got into download mode and tried to flash stock rom, but just getting errors from LGMobile Support Tool...
This is the error log from LGMobile Support Tool.
17:14:23 : Restart.....
17:14:23 : Start Date : 2014-01-17 17:14:23
17:14:23 : ---------- QM Testmode ---------
17:14:23 : ***** Check Tool Version *****
17:14:23 : Tool version : 1.6.9.0
17:14:23 : UpgradeDLL version : 2.1.5.0
17:14:23 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
17:14:23 : LGE USB Driver Version :
17:14:23 : Android PDLV Version :
17:14:23 : Android NDLV Version :
17:14:23 : ******************************************
17:14:23 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
17:14:23 : SetEmerModeAT()
17:14:23 : _IsConnectedPhone Call
17:14:24 : _IsConnectedPhone(0)
17:14:24 : 0 - NotConnected.
17:14:24 : 1 - Normal connect success
17:14:24 : 2 - Emergency connect success
17:14:24 : *****CheckOS Start********
17:14:24 : Microsoft_Windows7_Professional_
17:14:24 : *****CheckPCSyncPrograms Start*****
17:14:25 : PCSyncPrograms Not Found - OK and ready to upgrade
17:14:25 : Verifying phone connection...
17:14:25 : dwWaitResetTime(40000 ms)
17:14:26 : _IsConnectedPhone Call for 3GQCT
17:14:27 : Phone Mode(0)
17:14:27 : 0 - NotConnected.
17:14:27 : 1 - Normal connect success
17:14:27 : 2 - Emergency connect success
17:14:27 : _IsConnectedPhone Call
17:14:34 : _IsConnectedPhone(2)
17:14:34 : 0 - NotConnected.
17:14:34 : 1 - Normal connect success
17:14:34 : 2 - Emergency connect success
17:14:34 : Phone Mode(2)
17:14:34 : *****GetPhoneType Start*****
17:14:34 : Phone Type : CDMA_2CHIP
17:14:34 : *****GetPhoneBinaryVersion Start*****
17:14:34 : Phone Bin Version : D80210F_00
17:14:34 : *****Get ESN / IMEI / MEID Start*****
17:14:34 : ESN/IMEI/MEID : 357246058069368
17:14:36 : Check Backup and Restore model
17:14:36 : Skip Backup and Restore - Emergency mode
17:14:36 : Phone type Compare start
17:14:36 : *****CheckPCSyncPrograms Start*****
17:14:36 : PCSyncPrograms Not Found - OK and ready to upgrade
17:14:37 : ****************CheckAndDownload********************
17:14:37 : Version :
17:14:37 : ******Extract Start C:\Users\Oliver\Documents\LG\D80210A_00.kdz*****
17:14:37 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
17:14:37 : Check 2G-4G big size kdz file..
17:14:37 : Extract 2G-4G big size kdz file..
17:14:37 : NNNNN WDB FullPath(C:\Users\Oliver\Documents\LG\D80210A_00.kdz)
17:14:37 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
17:14:37 : Extract End C:\Users\Oliver\Documents\LG\D80210A_00.kdz
17:14:38 : 01 Skip delete kdz 1.1 file...
17:14:38 : ------------------Model.dll Information-------------------
17:14:38 : Filename : LGUP_8974.dll
17:14:38 : Version : 0.2.10.0
17:14:38 : File size : 1461248
17:14:38 : File date : 2014/01/17-17:14:37
17:14:38 : PC Created date: 2014/01/17-17:14:37
17:14:38 : ----------------------------------------------------------
17:14:38 : *****Check LGCM Programs Start*****
17:14:38 : LGCM Programs Not Found - OK and ready to upgrade
17:14:38 : m_pLGCyonUpdate status change.
17:14:39 : *****WorkModelDLL Start*****
17:14:39 : strPhoneBinaryPath(C:\Users\Oliver\Documents\LG\D80210A_00.kdz)
17:14:39 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
17:14:39 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
17:14:39 : _DetachDLL Call
17:14:44 : _DetachDLL Call End
17:14:44 : Call fn_StartUpgrade
17:14:44 : ********* 2Chip Model.dll input Parameter*************
17:14:44 : MODEL_EVENT : 32769
17:14:44 : PhoneBinaryPath : C:\Users\Oliver\Documents\LG\D80210A_00.kdz
17:14:44 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
17:14:44 : BootWaitTime : 49500
17:14:44 : UsbHighSpeed : FALSE
17:14:44 : PhoneMode : 2
17:14:44 : NewPhoneBinVersion : D80210A_00
17:14:44 : ClearSI : FALSE
17:14:44 : AuthMark : 0
17:14:44 : ********* 2Chip Model.dll input Parameter End*************
17:14:47 : wParam : 20, lParam = 540
17:14:47 : MODEL DLL Event : (20, 540)
17:14:48 : Model File Count = 540
17:14:48 : wParam : 100, lParam = 51
17:14:48 : MODEL DLL Event : (100, 51)
17:14:48 : Step : TYPE_WPARAM_UPGRADE_ERROR
17:14:48 : CleanModelDll() : Free Model.dll
17:14:48 : _DetachDLL Call
17:14:53 : _DetachDLL Call End
17:14:53 : Page_Error ºÎºÐÀÔ´Ï´Ù
17:14:53 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Okay, so using power + vol down I could make a factory reset and now it boots to 10F. But since the latest update here in Sweden is 10A I want to get it to 10A, but still getting those errors while flashing.
That's not my biggest problem. I still have the lines on my screen..... Any idea? I'm 100% sure that there has been so physical damage to the device.
On a typical monitor, those artifacts can happen if there's problem with the GPU (loose dvi cable, GPU not inserted to the motherboard correctly, static electricity, overheat, etc,etc)
now, when i saw your pic on other thread, your device is a laptop right?, windows xp on the other hand (might be an older generation laptop? they're hot!)
my guess is......Overheating. let it powered off for longer time in a cool place, 12 hour or so.
if it doesn't solve anything, you can take it to repair shops. maybe the GPU-to-monitor cable is problematic
Author of thread wanted to show us an example . He has patterned screen on LG G2, and he wanted to show us that it looks like in the pictrue .
I have very simillar problem on my Asus Transformer TF300T. I have patterned screen, after installing kernel over 1,4GHz on the CPU.
In attachment is my tablet. There is any difrence between my tablet & your phone?
pipops said:
On a typical monitor, those artifacts can happen if there's problem with the GPU (loose dvi cable, GPU not inserted to the motherboard correctly, static electricity, overheat, etc,etc)
now, when i saw your pic on other thread, your device is a laptop right?, windows xp on the other hand (might be an older generation laptop? they're hot!)
my guess is......Overheating. let it powered off for longer time in a cool place, 12 hour or so.
if it doesn't solve anything, you can take it to repair shops. maybe the GPU-to-monitor cable is problematic
Click to expand...
Click to collapse
Hazard17 said:
Author of thread wanted to show us an example . He has patterned screen on LG G2, and he wanted to show us that it looks like in the pictrue .
I have very simillar problem on my Asus Transformer TF300T. I have patterned screen, after installing kernel over 1,4GHz on the CPU.
In attachment is my tablet. There is any difrence between my tablet & your phone?
Click to expand...
Click to collapse
Correct. That's just an example, I have an LG G2.
Mine's not patterned, I just have these lines crossing my screen.
delete
Okay. Turns out that the reason that I couldn't flash 10a was that my kdz was corrupt. Downloaded it again and worked like a charm.
Still have the lines on my screen though...
MaXmeOliver said:
Correct. That's just an example, I have an LG G2.
Mine's not patterned, I just have these lines crossing my screen.
Click to expand...
Click to collapse
I hope it's not the same lines these guys experienced?
android404 said:
I hope it's not the same lines these guys experienced?
Click to expand...
Click to collapse
It's those lines for sure... ****. Guess I'll have to return it and hope that the warranty covers it.
MaXmeOliver said:
It's those lines for sure... ****. Guess I'll have to return it and hope that the warranty covers it.
Click to expand...
Click to collapse
Jævla dritt! As we say in Norwegian. Good luck.
Just a quick update - got the phone back from repair today. The warranty covered it, told them that my problem occured after a factory reset. They changed the screen and the battery(?). Be aware that this was only the lines problem, not the boot loop one.
guys please i need your help.
i was flashing using the go back to stock method but it's not working. i get this log:
00:30:01 : Restart.....
00:30:01 : Start Date : 2014-03-19 00:30:01
00:30:01 : ---------- QM Testmode ---------
00:30:01 : ***** Check Tool Version *****
00:30:01 : Tool version : 1.6.9.0
00:30:01 : UpgradeDLL version : 2.1.5.0
00:30:01 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
00:30:01 : LGE USB Driver Version :
00:30:01 : Android PDLV Version :
00:30:01 : Android NDLV Version :
00:30:01 : ******************************************
00:30:01 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:30:01 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:30:01 : SetEmerModeAT()
00:30:01 : _IsConnectedPhone Call
00:30:31 : _IsConnectedPhone(1)
00:30:31 : 0 - NotConnected.
00:30:31 : 1 - Normal connect success
00:30:31 : 2 - Emergency connect success
00:30:46 : *****CheckOS Start********
00:30:46 : Microsoft_Windows7_Professional_
00:30:46 : *****CheckPCSyncPrograms Start*****
00:30:47 : PCSyncPrograms Not Found - OK and ready to upgrade
00:30:47 : Verifying phone connection...
00:30:47 : dwWaitResetTime(40000 ms)
00:30:48 : Phone Mode(1)
00:30:48 : *****GetPhoneType Start*****
00:30:53 : Phone Type : QCT
00:30:53 : *****GetPhoneModel Start*****
00:30:53 : You can't continue the upgrade due to errors.\nFollow the order: (1)Separate the USB cable and battery from the phone; (2)Connect the battery; \n(3) Connect the USB cable to the phone.\n(4)Press the power button on the phone for 3~5 seconds. When the phone is on,\npress the '[Restart]' button for upgrade.\nGo to LG Mobile home and read notices about upgrades.\nTo finish the upgrade, press the 'Finish' button. (_GetPhoneModel() strlen(pPhoneModelBuf) Error)
00:30:53 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:30:53 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:30:53 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
00:30:53 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
can anyone help???
Carefully examine this topic, it will surely be installing.
http://forum.xda-developers.com/showthread.php?t=2432476
http://forum.xda-developers.com/showthread.php?t=2687768
If someone can help me please I have ls980 and can't go back to stock, I keep getting this
Sent from my MB855 using xda app-developers app
Hi
Now I have CM11 and I'd like to back to stock soft (V20B - as always). So I use R&D Test tool, tick options as always, normal upgrade test, choose language and installation starts. However it stops at 2%.
Whats wrong? I read it may be caused by issue with bootloader. Maybe my recovery (PhilZ)? I have no idea.
Any solutions?
Up
any solutions?
robson2222 said:
Up
any solutions?
Click to expand...
Click to collapse
Can you post a logcat. You might need to change your ports to com4. I read somewhere that a hard reset also helps.
Art Vanderlay said:
Can you post a logcat. You might need to change your ports to com4. I read somewhere that a hard reset also helps.
Click to expand...
Click to collapse
if you mean log from lg mobile support tool i have it:
Code:
13:03:55 : Restart.....
13:03:55 : Start Date : 2014-06-22 13:03:55
13:03:56 : ---------- QM Testmode ---------
13:03:56 : ***** Check Tool Version *****
13:03:56 : Tool version : 1.6.9.0
13:03:56 : UpgradeDLL version : 2.1.5.4
13:03:56 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
13:03:56 : LGE USB Driver Version :
13:03:56 : Android PDLV Version :
13:03:56 : Android NDLV Version :
13:03:56 : ******************************************
13:03:56 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
13:03:56 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
13:03:56 : SetEmerModeAT()
13:03:56 : _IsConnectedPhone Call
13:03:57 : _IsConnectedPhone(0)
13:03:57 : 0 - NotConnected.
13:03:57 : 1 - Normal connect success
13:03:57 : 2 - Emergency connect success
13:03:57 : *****CheckOS Start********
13:03:57 : Microsoft_Windows7_Professional_Service Pack 1
13:03:57 : *****CheckPCSyncPrograms Start*****
13:03:57 : PCSyncPrograms Not Found - OK and ready to upgrade
13:03:57 : Verifying phone connection...
13:03:57 : dwWaitResetTime(40000 ms)
13:03:58 : _IsConnectedPhone Call for 3GQCT
13:04:00 : Phone Mode(0)
13:04:00 : 0 - NotConnected.
13:04:00 : 1 - Normal connect success
13:04:00 : 2 - Emergency connect success
13:04:00 : _IsConnectedPhone Call
13:04:10 : _IsConnectedPhone(2)
13:04:10 : 0 - NotConnected.
13:04:10 : 1 - Normal connect success
13:04:10 : 2 - Emergency connect success
13:04:10 : Phone Mode(2)
13:04:10 : *****GetPhoneType Start*****
13:04:10 : Phone Type : CDMA_2CHIP
13:04:10 : *****GetPhoneBinaryVersion Start*****
13:04:10 : Phone Bin Version : UNKNOWN_00
13:04:10 : *****Get ESN / IMEI / MEID Start*****
13:04:10 : ESN/IMEI/MEID : 357246056667437
13:04:12 : Check Backup and Restore model
13:04:12 : Skip Backup and Restore - Emergency mode
13:04:12 : Phone type Compare start
13:04:12 : *****CheckPCSyncPrograms Start*****
13:04:12 : PCSyncPrograms Not Found - OK and ready to upgrade
13:04:13 : ****************CheckAndDownload********************
13:04:13 : Version :
13:04:13 : ******Extract Start D:\Telefon\G2\ROM\D80220B_00.kdz*****
13:04:13 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
13:04:13 : Check 2G-4G big size kdz file..
13:04:13 : Extract 2G-4G big size kdz file..
13:04:13 : NNNNN WDB FullPath(D:\Telefon\G2\ROM\D80220B_00.kdz)
13:04:13 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
13:04:13 : Extract End D:\Telefon\G2\ROM\D80220B_00.kdz
13:04:13 : 01 Skip delete kdz 1.1 file...
13:04:13 : ------------------Model.dll Information-------------------
13:04:13 : Filename : LGUP_8974.dll
13:04:13 : Version : 0.3.10.0
13:04:13 : File size : 1498624
13:04:13 : File date : 2014/06/22-13:04:13
13:04:13 : PC Created date: 2014/06/22-13:04:13
13:04:13 : ----------------------------------------------------------
13:04:14 : *****Check LGCM Programs Start*****
13:04:14 : LGCM Programs Not Found - OK and ready to upgrade
13:04:14 : m_pLGCyonUpdate status change.
13:04:14 : *****WorkModelDLL Start*****
13:04:15 : strPhoneBinaryPath(D:\Telefon\G2\ROM\D80220B_00.kdz)
13:04:15 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
13:04:15 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
13:04:16 : _DetachDLL Call
13:04:21 : _DetachDLL Call End
13:04:21 : Call fn_StartUpgrade
13:04:21 : ********* 2Chip Model.dll input Parameter*************
13:04:21 : MODEL_EVENT : 32769
13:04:21 : PhoneBinaryPath : D:\Telefon\G2\ROM\D80220B_00.kdz
13:04:21 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
13:04:21 : BootWaitTime : 49500
13:04:21 : UsbHighSpeed : FALSE
13:04:21 : PhoneMode : 2
13:04:21 : NewPhoneBinVersion : D80220B_00
13:04:21 : ClearSI : FALSE
13:04:21 : AuthMark : 0
13:04:21 : ********* 2Chip Model.dll input Parameter End*************
13:04:24 : wParam : 20, lParam = 540
13:04:24 : MODEL DLL Event : (20, 540)
13:04:25 : Model File Count = 540
13:04:25 : wParam : 100, lParam = 51
13:04:25 : MODEL DLL Event : (100, 51)
13:04:25 : Step : TYPE_WPARAM_UPGRADE_ERROR
13:04:25 : CleanModelDll() : Free Model.dll
13:04:25 : _DetachDLL Call
13:04:30 : _DetachDLL Call End
13:04:30 : Page_Error şÎşĐŔÔ´Ď´Ů
13:04:30 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
Of course I use offline method to flash ROM. Hard reset can't repair this.
Q&A for [FIX]LG Flash Tool Stuck At 2%
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [FIX]LG Flash Tool Stuck At 2%. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
worked like charm thank you for your support
Help Please
First of all, sorry for my english. I have the same 2% error, but the problem here is that I can't get into recovery mode, I only can get into download load, the phone doesn't turn on either.
That means that the only thing that I can do it's to flash a kdz file but the 2% error appears all the time. So, can you please help me? It's a 32gb D802.
Thank you very much.
it worked......thanks a lot...
wow....u r a genius , buddy...
i've been trying all sorts of tricks to flash it before....(i have done a vast number of flashing on different devices and on g2 , but never encountered the 2 % error...)
thanks to you, i've reverted back to the stock rom...
tons of thanks....hats off , .....
My log is like that:
00:44:22 : Start Date : 2015-04-10 00:44:22
00:44:22 : ---------- CSE mode ---------
00:44:22 : ***** Check Tool Version *****
00:44:22 : Tool version :
00:44:22 : UpgradeDLL version :
00:44:22 : Current Dir : C:\Users\jaco\Desktop\LG Flash Tool 2014
00:44:22 : LGE USB Driver Version :
00:44:22 : Android PDLV Version :
00:44:22 : Android NDLV Version :
00:44:22 : ******************************************
00:44:22 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:44:22 : *****CheckOS Start********
00:44:22 : Microsoft_Windows7_Professional_
00:44:22 : *****CheckPCSyncPrograms Start*****
00:44:22 : PCSyncPrograms Not Found - OK and ready to upgrade
00:44:22 : SetEmerModeAT()
00:44:23 : Verifying phone connection...
00:44:23 : dwWaitResetTime(40000 ms)
00:44:24 : _IsConnectedPhone Call
00:44:46 : _IsConnectedPhone(2)
00:44:46 : 0 - NotConnected.
00:44:46 : 1 - Normal connect success
00:44:46 : 2 - Emergency connect success
00:44:46 : Phone Mode(2)
00:44:46 : *****GetPhoneType Start*****
00:44:46 : Phone Type : CDMA
00:44:46 : *****Get ESN / IMEI / MEID Start*****
00:44:47 : Skip Backup and Restore - CSE mode.
00:44:47 : Skip Sequential upgrade info check - CSE mode.
00:44:47 : *****CheckPCSyncPrograms Start*****
00:44:48 : PCSyncPrograms Not Found - OK and ready to upgrade
00:44:49 : ****************CheckAndDownload********************
00:44:49 : Version : D80220H_00
00:44:49 : !!*****OpenURL Start*****!!
00:44:49 : ******Extract Start C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz*****
00:44:49 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
00:44:49 : Check 2G-4G big size kdz file..
00:44:49 : Extract 2G-4G big size kdz file..
00:44:49 : NNNNN WDB FullPath(C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz)
00:44:49 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:44:49 : Extract End C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz
00:44:49 : 01 Skip delete kdz 1.1 file...
00:44:49 : ------------------Model.dll Information-------------------
00:44:49 : Filename : LGUP_8974.dll
00:44:49 : Version : 0.3.13.1
00:44:49 : File size : 1526272
00:44:49 : File date : 2015/04/10-00:44:49
00:44:49 : PC Created date: 2015/04/10-00:44:49
00:44:49 : ----------------------------------------------------------
00:44:49 : *****Check LGCM Programs Start*****
00:44:49 : LGCM Programs Not Found - OK and ready to upgrade
00:44:49 : m_pLGCyonUpdate status change.
00:44:50 : *****WorkModelDLL Start*****
00:44:50 : strPhoneBinaryPath(C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz)
00:44:50 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
00:44:50 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:44:51 : _DetachDLL Call
00:44:56 : _DetachDLL Call End
00:44:56 : Call fn_StartUpgrade
00:44:56 : Phone mode change -> CSE
00:44:56 : ********* CDMA Model.dll input Parameter *************
00:44:56 : MODEL_EVENT : 32769
00:44:56 : PhoneBinaryPath : C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz
00:44:56 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
00:44:56 : BootWaitTime : 49500
00:44:56 : UsbHighSpeed : FALSE
00:44:56 : PhoneMode : 4
00:44:56 : NewPhoneBinVersion : D80220H_00
00:44:56 : ClearSI : FALSE
00:44:56 : AuthMark : 0
00:44:56 : ********* CDMA Model.dll input Parameter End*************
00:44:58 : Page_Error şÎşĐŔÔ´Ď´Ů
00:44:59 : wParam : 20, lParam = 540
00:44:59 : MODEL DLL Event : (20, 540)
00:45:00 : wParam : 100, lParam = 51
00:45:00 : MODEL DLL Event : (100, 51)
00:45:00 : CleanModelDll() : Free Model.dll
00:45:00 : _DetachDLL Call
00:45:05 : _DetachDLL Call End
00:45:07 : Page_Error şÎşĐŔÔ´Ď´Ů
00:45:07 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
00:45:10 : Call Retry Thread
00:45:10 : Verifying phone connection...
00:45:10 : Verifying phone connection...
00:45:10 : dwWaitResetTime(40000 ms)
00:45:14 : _IsConnectedPhone Call
00:45:33 : _IsConnectedPhone(2)
00:45:33 : 0 - NotConnected.
00:45:33 : 1 - Normal connect success
00:45:33 : 2 - Emergency connect success
00:45:33 : Phone Mode(2)
00:45:33 : *****WorkModelDLL Start*****
00:45:35 : _DetachDLL Call
00:45:40 : _DetachDLL Call End
00:45:40 : strPhoneBinaryPath(C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz)
00:45:40 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
00:45:40 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:45:40 : _DetachDLL Call
00:45:45 : _DetachDLL Call End
00:45:45 : Call fn_StartUpgrade
00:45:45 : Phone mode change -> CSE
00:45:45 : ********* CDMA Model.dll input Parameter *************
00:45:45 : MODEL_EVENT : 32769
00:45:45 : PhoneBinaryPath : C:\Users\jaco\Desktop\LG Flash Tool 2014\D80220H_00.kdz
00:45:45 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
00:45:45 : BootWaitTime : 74250
00:45:45 : UsbHighSpeed : FALSE
00:45:45 : PhoneMode : 4
00:45:45 : NewPhoneBinVersion : D80220H_00
00:45:45 : ClearSI : FALSE
00:45:45 : AuthMark : 0
00:45:45 : ********* CDMA Model.dll input Parameter End*************
00:45:48 : wParam : 20, lParam = 540
00:45:48 : MODEL DLL Event : (20, 540)
00:45:49 : wParam : 100, lParam = 51
00:45:49 : MODEL DLL Event : (100, 51)
00:45:49 : CleanModelDll() : Free Model.dll
00:45:49 : _DetachDLL Call
00:45:54 : _DetachDLL Call End
00:45:57 : Page_Error şÎşĐŔÔ´Ď´Ů
00:45:57 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
00:47:31 : Call Retry Thread
00:47:31 : Verifying phone connection...
00:47:31 : Verifying phone connection...
00:47:31 : dwWaitResetTime(40000 ms)
00:47:35 : _IsConnectedPhone Call
00:47:35 : _IsConnectedPhone(0)
00:47:35 : 0 - NotConnected.
00:47:35 : 1 - Normal connect success
00:47:35 : 2 - Emergency connect success
00:47:39 : _IsConnectedPhone Call
00:47:39 : _IsConnectedPhone(0)
00:47:39 : 0 - NotConnected.
00:47:39 : 1 - Normal connect success
00:47:39 : 2 - Emergency connect success
00:47:43 : _IsConnectedPhone Call
00:47:43 : _IsConnectedPhone(0)
00:47:43 : 0 - NotConnected.
00:47:43 : 1 - Normal connect success
00:47:43 : 2 - Emergency connect success
00:47:43 : The USB cable is not connected with the phone.
Connect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
00:47:45 : Check Cancel button active..
00:47:45 : CLGMobileHttp Class ĽŇ¸ę˝ĂŔŰ.
00:47:45 : CLGMobileHttp Class ĽŇ¸ę...
Click to expand...
Click to collapse
CAN i use this metod?
used the fix ,but stil not able to flash
Hi, I had used the tool previously to flash successfully.,
But now I'm on official 4.4.2. With philz latest recovery ..
The problem I'm encountering is that wen I try connecting the mob in recovery mode, to PC , I cant start adb services .
The mob is getting detected in the PC,,but wen I start the fix bat service , my device is not getting detected and just stuck at the message daemon started successfuly ...nothing else.
Please help me out. My mob is D802 international version with Indian official 4.4.2 installed.
I've already downloaded the lollipop version of hungarry 16gb and Open version 16 GB of another country.
Kindly advice me which one to install and how. To overcome this error...
The device is not getting detected......
Thanks in advance
I had this LG Flash tool 2% problem.
I did install FixedDownloadCMode.bat and it was succesfull.
I was in TWRP and then shutdown the device and booted to download mode. Download mode boot stuck to point where there was those blue dots. This was last time i could even try download mode.
After that when I try to shutdown device, it auto reboots directly to lg logo. Cant shutdown device.
Because of FixedDownloadCMode.bat there is no more twrp and because bootloop can't get and try download mode (if it even works).
What should i do now?
Help!
This D805
This tool work for the D805 Model
Is this risky? Could it cause a problem that would require more technical skill to solve? Because i havent done much more than root and flash zip files from recovery so id hate to brick a device thats currently working.
Teo222 said:
Is this risky? Could it cause a problem that would require more technical skill to solve? Because i havent done much more than root and flash zip files from recovery so id hate to brick a device thats currently working.
Click to expand...
Click to collapse
Look my post above. I would say, this is risky.
I was coming from working Acura ROM, but after this fix, I had to disassembly and hardware reset device to qhsusb mode.
i have this problem with G Flex2. how work?
What if I have only the first row of the error
-MODEL DLL Event : (100,51)
Should I flash anyway??
Did anybody try to follow the TOT method if the KDZ one wasn't working?
I had the 2% freeze problem too,but the TOT method worked for me.
Erro on Play Store
hi friend, after doing so I can install the firmware by KDZ however I cannot install applications from play store, already updated the app from the play store and play services but still no result
pardon my English
Thanks !!
Nice, it's working. This is very great job ! Very thanks !
Develop Something for D801 & Other Models
I have a D801 and I tried this method on my Phone, and Finally got a Black Screen of Death. After a Broad Torturing Situation and Sleepless Night I got my D801 back. Kindly Provide a Solution for the Similar Problem for this Variant and other Variants as well, So that other gets Benefit as well.
9/10 its your usb cable
solved for me ...
i had the same problem... with G2 d803 ...... when i bought it.....the back cover was replaced with D802 and a did a mistake by flashing via twrp recovery a firmware of D802.... guess what............ i lost even the download mode witch i reinstall it with fast boot.
so make sure that the firmware is the right one for your devices .... use imei written in back side of the back cover to find firmware otherwise flashtool will hung at 2 or 4 %.
Hello Community, first : Sorry for my bad english iam not so often here
As an Information for ypu, before i want to get Back to Stock , i installed months before CloudyG2 , but now LP is out and i want it Stock, so i downloaded the 80210E , because i want the update clean. Than the Flash Tool, drivers and started but not out of memorys , with an Tutorial.
But every Single time , when the Device is allready in the Downloadmode the Flash Tool Stuck at 2 % , so i googled but no fix can help me. I Tried a lot of fixes, that one which you install over ADB on your Device dosnt help for example.
I restarted the PC , reinstall the drivers, redownloaded the Flash Tool , tried other KDZ's, other ports and other cable - an another PC isnt available.
To The PC : Dell D630with an T7100 , 4GB RAM and Windows 8.1 Pro 64 Bit.
Device : LG-G2D802 normally with an Telekom Branding
Now I Installed the Flashable Zip 80230A from here and it worked fantastic but i want it without root and easy : clean.
Here is my last log from tody :
08:12:56 : Start Date : 2015-04-09 08:12:56
08:12:56 : ---------- CSE mode ---------
08:12:56 : ***** Check Tool Version *****
08:12:56 : Tool version :
08:12:56 : UpgradeDLL version :
08:12:56 : Current Dir : C:\Users\Andre\Desktop\LG Flash Tool 2014\LG Flash Tool 2014
08:12:56 : LGE USB Driver Version :
08:12:56 : Android PDLV Version :
08:12:56 : Android NDLV Version :
08:12:56 : ******************************************
08:12:56 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
08:12:56 : *****CheckOS Start********
08:12:56 : Microsoft_Windows8_Professional_
08:12:56 : *****CheckPCSyncPrograms Start*****
08:12:57 : PCSyncPrograms Not Found - OK and ready to upgrade
08:12:57 : SetEmerModeAT()
08:12:57 : Verifying phone connection...
08:12:57 : dwWaitResetTime(40000 ms)
08:12:58 : _IsConnectedPhone Call
08:13:08 : _IsConnectedPhone(1)
08:13:08 : 0 - NotConnected.
08:13:08 : 1 - Normal connect success
08:13:08 : 2 - Emergency connect success
08:13:08 : Phone Mode(1)
08:13:08 : *****GetPhoneType Start*****
08:13:08 : Phone Type : CDMA
08:13:08 : *****Get ESN / IMEI / MEID Start*****
08:13:09 : Skip Backup and Restore - CSE mode.
08:13:09 : Skip Sequential upgrade info check - CSE mode.
08:13:09 : *****CheckPCSyncPrograms Start*****
08:13:10 : PCSyncPrograms Not Found - OK and ready to upgrade
08:13:11 : ****************CheckAndDownload********************
08:13:11 : Version : D80210E_00
08:13:11 : !!*****OpenURL Start*****!!
08:13:11 : ******Extract Start C:\Users\Andre\Desktop\LG Flash Tool 2014\LG Flash Tool 2014\D80210E_00.kdz*****
08:13:11 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
08:13:11 : Check 2G-4G big size kdz file..
08:13:11 : Extract 2G-4G big size kdz file..
08:13:11 : NNNNN WDB FullPath(C:\Users\Andre\Desktop\LG Flash Tool 2014\LG Flash Tool 2014\D80210E_00.kdz)
08:13:11 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
08:13:11 : Extract End C:\Users\Andre\Desktop\LG Flash Tool 2014\LG Flash Tool 2014\D80210E_00.kdz
08:13:11 : 01 Skip delete kdz 1.1 file...
08:13:11 : ------------------Model.dll Information-------------------
08:13:11 : Filename : LGUP_8974.dll
08:13:11 : Version : 0.2.10.0
08:13:11 : File size : 1461248
08:13:11 : File date : 2015/04/09-08:13:11
08:13:11 : PC Created date: 2015/04/09-08:13:11
08:13:11 : ----------------------------------------------------------
08:13:12 : *****Check LGCM Programs Start*****
08:13:12 : LGCM Programs Not Found - OK and ready to upgrade
08:13:12 : m_pLGCyonUpdate status change.
08:13:13 : *****WorkModelDLL Start*****
08:13:13 : strPhoneBinaryPath(C:\Users\Andre\Desktop\LG Flash Tool 2014\LG Flash Tool 2014\D80210E_00.kdz)
08:13:13 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
08:13:13 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
08:13:13 : _DetachDLL Call
08:13:18 : _DetachDLL Call End
08:13:18 : Call fn_StartUpgrade
08:13:18 : Phone mode change -> CSE
08:13:18 : ********* CDMA Model.dll input Parameter *************
08:13:18 : MODEL_EVENT : 32769
08:13:18 : PhoneBinaryPath : C:\Users\Andre\Desktop\LG Flash Tool 2014\LG Flash Tool 2014\D80210E_00.kdz
08:13:18 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
08:13:18 : BootWaitTime : 49500
08:13:18 : UsbHighSpeed : FALSE
08:13:18 : PhoneMode : 4
08:13:18 : NewPhoneBinVersion : D80210E_00
08:13:18 : ClearSI : FALSE
08:13:18 : AuthMark : 0
08:13:18 : ********* CDMA Model.dll input Parameter End*************
08:13:27 : wParam : 20, lParam = 540
08:13:27 : MODEL DLL Event : (20, 540)
08:13:28 : Model File Count = 540
08:13:28 : wParam : 13, lParam = 5
08:13:28 : MODEL DLL Event : (13, 5)
08:13:31 : wParam : 13, lParam = 6
08:13:35 : wParam : 13, lParam = 7
08:13:39 : wParam : 13, lParam = 8
08:13:43 : wParam : 13, lParam = 9
08:14:58 : wParam : 100, lParam = -2130706432
08:14:58 : MODEL DLL Event : (100, -2130706432)
08:14:58 : Step : TYPE_WPARAM_UPGRADE_ERROR
08:14:58 : CleanModelDll() : Free Model.dll
08:14:58 : _DetachDLL Call
08:15:03 : _DetachDLL Call End
08:15:06 : Page_Error ºÎºÐÀÔ´Ï´Ù
08:15:06 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
The Last 2 Lines, i dont understand..
I Hope you can understand me and you can help me :/
Greetings
Download other version of stock rom, that one might be corrupted
allready tried, i downloaded it from the LGKDZ site and the other decrow (?) site where all KDZ's available.
Lizzacore said:
allready tried, i downloaded it from the LGKDZ site and the other decrow (?) site where all KDZ's available.
Click to expand...
Click to collapse
Have you tried this ?
Yes, tried this too .. Dosnt Work
As you can read in my start post, stuck on 2 % when the Device is allready in Download Mode and 9% when the Phone is Booted.
What do you mean ?
Lizzacore said:
What do you mean ?
Click to expand...
Click to collapse
Have you tried Returning to Stock using the .TOT method instead of the .KDZ method?
Return to Stock Thread including .TOT Method.
D802 .TOT files.
No i dont try because the Download for the tot file Take a long time
Sorry for the Double Post, i will try it now with the .TOT File , thanks for the mirror its better than everybody ;D
EDIT:
he Flashing Tool cant find my Device, maybe this is the reason why the .KDZ flashing method dosnt work ?
I can find the Device in the Device- Mananger, whats going on here ?
So, works perfectly with the TOT method, now on 80220D w8 for LP thank you all.