FIXED!!! White stripes - G2 Q&A, Help & Troubleshooting

hi everyone, after some white stripes show up from nothin while i was using the gps and the weather was a bit hot and that maybe damaged my screen. So i changed the wole screen. Some white stripes shows up on screen when i put the back cover on. For example if i turn of and put the back cover and turn the phone the stripes will appear. But if i remove the back cover and turn on the phone it wont show up. And sometimes when i turn on the phone with the back cover the screen gets grey aand i cant see so i have to turn off and turn on again.
I think maybe the flex cable might be broken.
I tried dissembly the phone twice but the problem still here. I tried going back to stock rom(JB, KK and LOLLIPOP) but nothing help
if any1 know what is problem plz tell me adn sorry bad english
Edit:
The problem Was the flex cable that was broken

Related

Replaced LCD Screen but it stays off...

I just replaced the screen on my T-Mobile Wing.......but after turning on the phone the screen wont turn on...i thought maybe i didnt plug it in right so i did it about 3 times and no luck....I just put my old screen back on and it works fine...could it be defective? or something i gotta do to the new screen before plugging it in?
OK so I got it to work.......but the screen has a slight yellow tint to it.....is that how its supposed to look? (I got the screen from ebay)

Screen went white & buttons didn't work.. took to fix phone... and...

Screen went white & buttons didn't work.. took to get phone fixed... and...now buttons work but the screen has a weird yellow tint
what is the problem, and how to fix
bump. anyone?
Can you say a bit more about it. How strong is this yellow tint. Can you upload a picture.
It's difficult to know if this is caused by a new screen that has a faint yellow tinge or whether it's a definite fault.
Mike
My phone started getting the white screen issue, the buttons stopped working.
When I'd turn the display on, it would be all white, id have to press it a few times then it would be ok, the buttons seized to function.
I took it to get fixed, the buttons now fully work, but the screen has a weird yellow tint all over. It didn't have it before. I was mad at the repair shop, the guy told me that its the LCD screen connector cable or whatever... but I don't believe him, as he doesn't seem to know wtf he is saying..
please help
Mine started doing this recently. Screen fades to white and nothing works but I can still hear if I'm on the phone. For me, turning it off and back on resolves the issue (I can see the display again). I suppose some aren't so lucky..
More than likely the LCD connector cable has a problem. Why he didn't fix it, I have no idea. If you feel up to taking it apart, you may be able to push the connector in further, OR you could buy a new screen. Then again...
Hi there
I have rebuilt many hermes with the same problems. I researched the issues on here and elsewhere - Its nearly always related to the entire Dpad/cable/connections . I have repaired nearly all of these quite simply by dismantling them and adjusting/cleaning and reassembling them - things move and get out of contact etc and this is what happens with these - get a torx driver and have a go - after a few tries you will usually solve the problem
Happy to assist anybody who would like a hand
Kind regards
John

[Q] New screen not working after replacement

Hi all,
I had a touchscreen issue (sometimes not working) in my HD2 so I ordered a new fabric screen+lcd assemby. I replaced it very carefully but now when I plug new lcd it is not working. Phone is working, buttons, vibration, hear the sound when turning on but there is only backlight on display and just shows black screen. I am sure that display is ok because I tried to put old one (wich was still working before replacement) and it has same issue (backlight works but display is black). Can you give me some ideas what is wrong ????
damaged lcd ribbon connector on mainboard or ribbon not being inserted fully or latched securely
Ty booting to bootloader ...
Help
The flex cable is not attached correctly or the main board is broken and before you close your phone try it. If you can't do this give someone your phone and he will recover for you.
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
wojcimierz said:
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
Click to expand...
Click to collapse
Have you tried turning phone on with volume down button pressed???
You should see 4 colors. Try this. I search for you.
http://forum.xda-developers.com/showthread.php?t=2263026
try with this link.
Yes I have read this before but I think that white screen problem is not sloved in this thread. But maybe I could be wrong.

Need help with strange screen problem [For the smart guys!]

I have just replaced my samsung galaxy s4 screen lcd and digitalizer. When i boot up the phone the screen has an yellowish white tone.
When i plug out the bottom buttons and the charger cord inside the phone, from the main board. The yellowish screen goes away, and i get a nice white toned screen.
Is this a hardware or software problem?
Does anyone have a clue how to fix it? any sort of contribution would help!
Sorry for bad english, it is not my native language
What happens when you connect the old lcd?
Lennyz1988 said:
What happens when you connect the old lcd?
Click to expand...
Click to collapse
Well, the reason i switched lcd was because it broke down when i droped my phone on the floor, so that one doesnt show anything...
I can see my background picture in behind, when the screen gets yellow and i open an app. the phone is also rooted

Screen replaced, problem when blocking screen

Bought a screen on ebay, took it to a friend that replaced it soo bad that he even cracked it.
Other than that the screen is ok.
But there is a problem when I block the screen pressing the power button, after pressing it again to resume what I was doing it won't turn on.
I mean, it turns on but with stripes and lines black and white.
Initially is all black, then it turn slowly white. the touch digitizer is working but the lcd has serious problems.
Turning completely off the phone reset this.
Someone can help me find out what it can possibly be?
Some wrong contacts?
Thanks so much
Did you fix it?
My D802 after two years of display replacement, started to perform laggy and I can't unlock the screen once it is locked. I can see a low white light in the background but the display dont turn on.

Categories

Resources