rebooting after root - Galaxy S 4 Q&A, Help & Troubleshooting

I rooted my galaxy s4 i9515 with cf root ( CF-Auto-Root-jfvelte-jfveltexx-gti9515 )
using odin if it matters
it all went well and when i entered superSU it had a message that the root will work better if i turn knox off
so i klicked ok and after that the phone started rebooting once an hour or more, dosent have a specific time until it reboots.
also some times the touch dosnet work after i open the phone, i need to close it and open again and it works fine.
do i need to deknox the phone in some other way?
is there a way to fix it?
thanks

Yes you need to delete everything from Knox.
If after that you still got reboots:
1. Flash the firmware you are on. It won't wipe anything (don't use .pit and don't check re-partition).
2. Reflash cf auto root
3. Don't click ok at that supersu message about knox.
4. Remove Knox manually.

Lennyz1988 said:
Yes you need to delete everything from Knox.
If after that you still got reboots:
1. Flash the firmware you are on. It won't wipe anything (don't use .pit and don't check re-partition).
2. Reflash cf auto root
3. Don't click ok at that supersu message about knox.
4. Remove Knox manually.
Click to expand...
Click to collapse
how i remove knox manually?

Related

[Q] Phone Stuck in Odin Mode

So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
143bubblepop said:
So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
Click to expand...
Click to collapse
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
I'm new to the rooting world
Rosli59564 said:
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
Click to expand...
Click to collapse
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
143bubblepop said:
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
Click to expand...
Click to collapse
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Rosli59564 said:
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Click to expand...
Click to collapse
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
Yes in PDA slot in ODIN...
143bubblepop said:
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
Click to expand...
Click to collapse
I don't think you'll need to
Rosli59564 said:
I don't think you'll need to
Click to expand...
Click to collapse
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
143bubblepop said:
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
Click to expand...
Click to collapse
It shouldn't. Which cwm version you used?
Rosli59564 said:
It shouldn't. Which cwm version you used?
Click to expand...
Click to collapse
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
143bubblepop said:
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
Click to expand...
Click to collapse
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Rosli59564 said:
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Click to expand...
Click to collapse
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
143bubblepop said:
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
Click to expand...
Click to collapse
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Rosli59564 said:
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Click to expand...
Click to collapse
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
143bubblepop said:
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
Click to expand...
Click to collapse
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
143bubblepop said:
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
Click to expand...
Click to collapse
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Rosli59564 said:
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Click to expand...
Click to collapse
Its 4.3
Install mega?
143bubblepop said:
Its 4.3
Install mega?
Click to expand...
Click to collapse
If you would like twrp no need mega. Just download it from the site

[Q] How to root my Note 3

Guys, i need help. I am new to samsung phone and have no idea how to root my note 3. Which method should I use to root my note 3 safely. Thanks in advance! CHEERS!
Download this file ( http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip ), then follow this instructions:
" BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA.
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin3-v1.85.exe file, press the PDA button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, thenclean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually."
Sent from my SM-N9005 using Tapatalk
I would just towelroot it.
First go to download mode and flash KERNEL_N9005XXUEND3.tar.md5
Now download towelroot.apk
Root it
Now flash latest kernel for your handset. Voila, rooted and Knox 0X0.
I am online from my phone, so you must google for links
Best regards
The chainfire way is the one I used to root my n9005 so I'm suggesting it. I have heared much about the towelroot method but I have never tried it myself, that's why I didn't mention it...
. @identifyaw, the fact that towelroot does not void your knox warranty is very important because you can retrive your warranty if needed, but as i said, I have never tried this method and i cant ensure you that it works. The decision is yours...
Sent from my SM-N9005 using Tapatalk
thank you guys alot mannn

[Q] Exit from bootloop, Supersu problem

Hello guys, I need help, I update my Note 3 LTE to Lollipop without knox (still 0x0) everythink was fine but then Supersu start scream about update binary files, I gave them update but installation was failed, Supersu want to reset my phone and try again, when I choose restart my Note jump into Bootloop stuck on SAMSUNG logo? Could someone help me? Wipe cache and factory reset on stock recovery didn't help, I just want to make this without change my KNOX because I got still warranty. (Sorry a lot for my english)
before update you forgot to check survival mode in supersu.
try kies or odin
dancapitan said:
before update you forgot to check survival mode in supersu.
try kies or odin
Click to expand...
Click to collapse
I cant use Kies, phone didnt load a system, there is any software to odin which didnt change my knox?
yes ! if u flash with odin latest original rom from sam mobile you'll not trip knox !:good:

How to Root the SM-P600 P601 & P605 running 5.1.1 Stock Lollipop

Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire.
Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
After installing CF Root, Superuser.apk is not installed and root access is available to every app without notification. No Superuser app is being installed. If I install 2.52 beta or 2.46 or the play store version, root becomes broken. Can't figure out why. System: DBT P605XXU1EOI5_P605DBTEOJ1_P605XXU1EOI5 and NEE P605XXU1EOI5_P605OXAEOI5_P605XXU1EOI5. Tried with fresh install, of course.
Pandur2000 said:
After installing CF Root, Superuser.apk is not installed and root access is available to every app without notification. No Superuser app is being installed. If I install 2.52 beta or 2.46 or the play store version, root becomes broken. Can't figure out why. System: DBT P605XXU1EOI5_P605DBTEOJ1_P605XXU1EOI5 and NEE P605XXU1EOI5_P605OXAEOI5_P605XXU1EOI5. Tried with fresh install, of course.
Click to expand...
Click to collapse
Try flashing the latest supersu.zip via custom recovery recovery
Extreme_Heat said:
Try flashing the latest supersu.zip via custom recovery recovery
Click to expand...
Click to collapse
Did that with 2.66 Beta - worked (for) now. Will report back if any further problems occur. Had to perform a data, Dalvik, cache, system wipe, reinstall stock, then CF root. Then it worked out, finally. Just deleting system / caches wasn't enough. Weird.
I still can not find where to download the stock firmware. All those sites either need premium or broken link. Anyone can help? stock firmware for P601. Thanks a lot in advance
sigelopisan said:
I still can not find where to download the stock firmware. All those sites either need premium or broken link. Anyone can help? stock firmware for P601. Thanks a lot in advance
Click to expand...
Click to collapse
OT: Try SamFirm.
Pandur2000 said:
OT: Try SamFirm.
Click to expand...
Click to collapse
Hi Pandur2000, thanks alot. In fact, I'm still figuring out how to use this tools. If its coming from Sammobile, I'm on my 6th attempt to download the firmware. All of them disconnect when I downloaded approx 1.2GB (total 1.4GB). Its frustrating but I have no other choice now :crying::crying::crying::crying:
sigelopisan said:
Hi Pandur2000, thanks alot. In fact, I'm still figuring out how to use this tools. If its coming from Sammobile, I'm on my 6th attempt to download the firmware. All of them disconnect when I downloaded approx 1.2GB (total 1.4GB). Its frustrating but I have no other choice now :crying::crying::crying::crying:
Click to expand...
Click to collapse
If you're downloading from Sammobile, my advice is to use a Download Manager. I'm currently using Download Accelerator Plus, which not only allows to Pause/Resume downloads from SamMobile (it will ask you for your login credentials to SamMobile when you start de download), but it will also try to connect to multiple servers to download the files faster. I'm currently downloading the firmware for my Galaxy Note 2014 LTE from their servers at 1,5MB/s after having needed to reboot my PC
Hope it helps
P.S. I'm assuming you're using Windows, but if you're using another OS google for download managers for your OS and I'm certain you'll find something that'll help you
---------- Post added at 11:57 AM ---------- Previous post was at 11:55 AM ----------
Extreme_Heat said:
Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire. Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
Click to expand...
Click to collapse
First time didn't let the pass message appear on Odin before disconnecting the cable (my bad - been doing this for so long that sometimes overlook some steps xD) and the SuperSU app wasn't installed.
After factory resetting the device and redoing the process a second time (paying attention to what was doing xD) it worked like a charm!
Thanks man ;D
I rooted my SM-P605 with latest CF-AutoRoot 5.1.1 but I can see something wrong.
SuperSu app is correctly installed and working (I'm using Seeder and tried Xposed) but:
- cannot give root permission to Clean Master (every time I try it fails)
- each time I reboot TWRP it asks me to install SuperSu.
Inviato dal mio SM-N9005 utilizzando Tapatalk
No luck
Note 2014 5.1.1 vzw cant seem to get this to work 8(
Thanks, worked perfectly for me using a P605.
?
StreetGuru said:
Thanks, worked perfectly for me using a P605.
Click to expand...
Click to collapse
Was it a Verizon tablet my odin keeps saying fail when I try to flash anything
StreetGuru said:
Thanks, worked perfectly for me using a P605.
Click to expand...
Click to collapse
It works (I've got a P605) but while I had been rooting it stuck on the Samsung logo so I had to download and install the stock firmware again and repeat the process of granting administrator rights.
Open up su and tells me it cannot find su binary, uninstalled it from play store and open again and same issie.
I have a refurbished LTE version from Tmobile. Will this work with my model P607t? I have read that the P605 model is almost the same as the P607T. Also heard root breaks S Pen functionality.
Extreme_Heat said:
Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire. Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
Click to expand...
Click to collapse
Worked flawlessly, except that on my first try there is no SuperSU app so I repeated the process again. Worked.
Thanks!
Am I reading correctly that this does not work on Verizon's version? SM-P605v is the official model.
worked fine on p601 but stuck with twrp
i followed all the steps and rooted fine on p601...but when i tried to install twrp recovery it is installing and saying pass on odin but when tried to open twrp it is getting bootloop with "recovery is not seandroid enforcing" i tried autoroot again ...so please tell me how to install twrp
Extreme_Heat said:
Ok so I will be giving you guys a tutorial on how to root the Samsung galaxy note 10.1 2014 edition running the latest version of android 5.1.1 specifically the SM-P600, SM-P601, & P605. I will be using the CF- AutoRoot By Chainfire. Here are images if you need help
Preparations
Download the CF- AutoRoot File for your device
P600
P601
P605
When the download is complete, you have to extract the zip file If I root
Make sure you have Android Debugging Enabled on your device
Boot into Odin/Bootloader mode by holding Vol Down+Power+Home at the same time, then press Vol up when the triangle appears
Procedure
Open the folder you extracted the autoroot files in, right click on the Odin 3 Application file and run as administrator
Now select the AP button in Odin, and select the autoroot file
Now connect your device to your computer, You should see Added in the log, and the box on top should turn blue
Important Make sure that under options only Auto Reboot, & F. Reset Time is ticked, un check everything else
Now press Start, your device should reboot, and you should see a red android pirate and some commands running
Don't worry if your device reboots a couple of times its normal
You can un-plug you device when it boots, and Odin should say pass, after that exit Odin, and your done!
Go in your apps, and you should see SuperSU, update the binaries if needed, to make sure root was successful, download root checker from the play store, and verify root
Your all done! You have successfully rooted your device!
Troubleshooting
If your device is stuck in a boot loop, hold vol up+Power and scroll down to Reset Data, and confirm, your device will be completely wiped, you can try to root again and see if it is successful
If a factory reset did not work you have to re-flash your firmware via Odin here is a tutorial on how to do it
If you get a message 'Recovery is not Seandroid Enforcing' while booting repeat the procedure, but instead of the CF AutoRoot file select the stock recovery file and flash it. Once your device reboots it should be fine.
If you have any problems please comment below, and i will try to help you through them, and Thanks! Happy Rooting!
Click to expand...
Click to collapse
Could you please let me know if rooting my tablet would void the warrantee or trip the Knox counter? Thank you.
Kingsman1 said:
Could you please let me know if rooting my tablet would void the warrantee or trip the Knox counter? Thank you.
Click to expand...
Click to collapse
yes it does. to both.

There is no root for Samsung edge G935FD on CF AUTO ROOT

I wanted to use CF AUTO ROOT and I cant find G935FD only the G935F. I dont know if i can use that. Can anybody please confirm this?
I verified SM-G935F (NRD90M.G935FXXU1DQD3, 7.0, 62a903c04886dfa3d26e04e07f3e72a3) woks on SM-G935FD.
will it trip the knox or knox safe it is?
asadnow2k said:
will it trip the knox or knox safe it is?
Click to expand...
Click to collapse
Root will trigger knox
teoboy said:
I wanted to use CF AUTO ROOT and I cant find G935FD only the G935F. I dont know if i can use that. Can anybody please confirm this?
Click to expand...
Click to collapse
basically the same phone just the FD has an extra sim slot
thats all
you can flash anything F related on FD, even the stock firmware
the following steps i do to root my SM-G935F and i don't will miss it.
the first method (TWRP with supersu-zip file and dm-verity disabler install was failed, bootloop)
The second try with CF-Autoroot have rooted it.
Bevore rooting with CF auto-root it's needed that you activate the developer options with oem-unlock and usb-debugging.
Than you make a factory reset about the android-own system recovery (home, vol+ and power)
at next you must change in the download mode without boot the "fresh" system and then flash the CF-Autoroot with odin.
Than you can start the fresh system without any first changes bevore rooting process have starts. The securityLogAgent warns you about unauthorized changes. you can disable this notice. And you must disable samsung knox too because it can behinds supersu. a example s-health will not work with rooted devices. one file edited and it works again.
see here. https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-s-health-devices-knox-t3543306
In the system app menu you can only stop it. Than you go fast to supersu, this app disable it.

Categories

Resources