Hey Guys,
Just wanted to share with you the NFS-Module I build today.
Maybe someone can use it.
You can copy the Modules wherever you want and then let it load automatically by an APP.
For example with Mount Manager
Or you can load them manually in this order by:
Code:
su
insmod /path/to/module/sunrpc.ko
insmod /path/to/module/lockd.ko
insmod /path/to/module/auth_rpcgss.ko
insmod /path/to/module/nfs.ko
Mounting can be done in Terminal, with "busybox mount". Normal mount seems not to work:
Code:
su
busybox mount -t nfs -o hard,intr,nolock,sync,vers=3,exec 192.168.1.1:/path/to/share /path/to/mountpoint
Unfortunately, since JB Android doesn't make mounts made by root visible for other users.
So even if you mount via Terminal or with Mount Manager, you won't see anything as normal user.
You can see them only as root.
If you want to mount shares for normal user, do the following:
Code:
su -c setenforce 0 && su --mount-master -c busybox mount -t nfs -o hard,intr,nolock,sync,vers=3,exec 192.168.1.1:/path/to/share /path/to/mountpoint
-
Related
I found a guide to aply apps to sd on my milestone. I got it working, but the problem is, that apps installed in the data/app-private folder doesn't show as installed. I can see that they are placed in ext2 partion on my sd card along with the other apps, that normaly installes in data/app.Here is the guide i used
After creatting a ext2 partition on my SD card, i copied ext2. To sd card along with
mot_boot_mode script
#!/system/bin/sh
export PATH=/system/bin:$PATH
mot_boot_mode.bin
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
Then in recovery mode i entered
adb shell
su
cp /sdcard/ext2.ko /data/ext2.ko
insmod /data/ext2.ko
mkdir /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
cp /data/app/* /data/sdapp/
mkdir /sdcard/sicherung
cp /data/app/* /sdcard/sicherung
rm -r /data/app
umount /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
ls /data/sdapp
ln -s /data/sdapp /data/app
chmod 644 /data/sdapp/*
/data/busybox/chown -h 1000:1000 /data/app
/data/busybox/chown 1000:1000 /data/sdapp/*
/data/busybox/chown 1000:1000 /data/sdapp
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
mount -o remount,rw / /system
mv /system/bin/mot_boot_mode /system/bin/mot_boot_mode.bin
cp /sdcard/mot_boot_mode_script /system/bin/mot_boot_mode
chmod 755 /system/bin/mot_boot_mode
Do i need to make a symbolic link in data/app-private also?
I would realy like to get this working, because i purchased a lot of apps on the marked. But i have only half of them installed. It used to work on my HTC hero. But it was allready enabled in a custom rom. And that is not possible to do on a Milestone
Thanks
Fixed it by changing app-private folder two
hey glaus...
this almost seems like a guide, hehe...
i'm trying to get apps2sd to work on my milestone as well...
i tried booting in recovery mode and entering the chain of commands you just set out....
but when i go into recovery mode, i see the reboot system option, apply sdcard:update.zip, wipe data/factory reset and wipe cache partition....
and under it, i have e: can't open /cache/recovery/command
any ideas on how to fix this or where can i enter those commands you set out?
i tried in adb shell, but i get a /data/busybox/chown is not found error when setting the permissions...
thanks!
do
crap me too and it deleted some apps 2 i really want this been trying for a week oh i have a telus milestone and get the same above error.busybox is installed and hard drive is partioned
ah crap market is gone 2 lol gotta do a nano restore......man i want this bad i even bricked my phone and brought it back to life this week arghhhh
yeah...i don't know where claus is from...but if he has a telus milestone, he's the only one i've seen been able to install apps2sd with a telus milestone
i've seen other countries, even some with the same bands as we have, but none have had the actual "telus" one....the funny thing is that i can get everything else to work..
i have titanium backup pro, emulator, root explorer and everything is at superuser access...
if claus can help, i will bear his children
edit: how the heck do you install/activate the mot_boot_mode script? I see reference to it in a few wikis on basically that's what will allow us to use apps2sd...but I have no clue how to implement it
got app2sd working on milestone using a diff method will post soon
ok i got app2sd working on my telus milestone here is how i did it if u tried this method here ur gunna have to unroot then root or use a nano backup of freshly rooted phone busybox need mot to be installed so use titanium for back up and proceed http://forum.xda-developers.com/showthread.php?t=692367
ClausG76 said:
I found a guide to aply apps to sd on my milestone. I got it working, but the problem is, that apps installed in the data/app-private folder doesn't show as installed. I can see that they are placed in ext2 partion on my sd card along with the other apps, that normaly installes in data/app.Here is the guide i used
After creatting a ext2 partition on my SD card, i copied ext2. To sd card along with
mot_boot_mode script
#!/system/bin/sh
export PATH=/system/bin:$PATH
mot_boot_mode.bin
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
Then in recovery mode i entered
adb shell
su
cp /sdcard/ext2.ko /data/ext2.ko
insmod /data/ext2.ko
mkdir /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
cp /data/app/* /data/sdapp/
mkdir /sdcard/sicherung
cp /data/app/* /sdcard/sicherung
rm -r /data/app
umount /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
ls /data/sdapp
ln -s /data/sdapp /data/app
chmod 644 /data/sdapp/*
/data/busybox/chown -h 1000:1000 /data/app
/data/busybox/chown 1000:1000 /data/sdapp/*
/data/busybox/chown 1000:1000 /data/sdapp
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
mount -o remount,rw / /system
mv /system/bin/mot_boot_mode /system/bin/mot_boot_mode.bin
cp /sdcard/mot_boot_mode_script /system/bin/mot_boot_mode
chmod 755 /system/bin/mot_boot_mode
Do i need to make a symbolic link in data/app-private also?
I would realy like to get this working, because i purchased a lot of apps on the marked. But i have only half of them installed. It used to work on my HTC hero. But it was allready enabled in a custom rom. And that is not possible to do on a Milestone
Thanks
Click to expand...
Click to collapse
fixed http://forum.xda-developers.com/showthread.php?t=692367
ok i have root access with busybox and su installed yet in terminal editor and adbshell i cannot remount my system as rw does anyone know why
ok update i got around my issue by using root explorer to get rw access on the system but still want to know why i cant do this
Sprint tab
How are you remounting it?
I always have good success with:
Code:
adb shell
su
remount rw /system
that is the exact code i have used and it gives me a not found error
Hmm. Check to see if /system/xbin/remount exists. If not, use Root Explorer to place this script at that location:
Code:
#!/system/bin/sh
#simplify mount rw and mount ro
#scripting wrote by forcystos - SDX - sdx-developers.com
#updated for samsunge epic by joeykrim - SDX - sdx-developers.com
case $1 in
rw)
echo "Remounting /system (/dev/stl9) in read/write mode"
/system/bin/mount -o remount,rw /dev/stl9 /system;;
ro)
echo "Remounting /system (/dev/stl9) in read-only mode"
/system/bin/mount -o remount,ro /dev/stl9 /system;;
*)
echo "usage: remount rw -or- remount ro";;
esac
Remember to change mode to 744 before executing.
I have an Atrix on AT&T. Which means there's a bootloader encryption, and the carrier prevents non-market apk installations, which I have resolved since my phone is rooted and I have changed the boot animation already.
In order to do these things, I found Ghost Commander that would let me chmod my system directories...which is fine, but I feel kind of gimped that I can't do it on terminal.
Basically, what I want to be able to do is remount /system as rw using terminal.
This method doesn't work on both terminal and emulator on my phone. I have done:
Terminal:
Code:
sudo su
cd [sdk directory]
./adb devices
./adb shell
su
mount -o remount,rw -t ext3 /dev/block/mmcblk0p12 /system
and this is where I get stuck because I just get an Invalid argument error.
Here is some info about my sytem -
Usage: mount [-r] [-w] [-o options] [-t type] device directory
/dev/block/mmcblk0p12 /system ext3 ro,noatime,nodiratime, data=ordered 0 0
Been searching for the answers for a while now, and now I'm here. What am I doing wrong? Thanks
there
Code:
mount -o remount,rw /dev/mmcblk0p12 /system
back
Code:
mount -o remount,ro /dev/mmcblk0p12 /system
Hmm, well at least I didn't get any errors this time.
I didn't get a confirmation or that it did anything at all. Is that normal?
Run mount with no parameters and look for the line with that device name, should see rw in that line instead of ro.
Sent from my MB860 using XDA App
Thanks guys, but I resorted to busybox chmod command instead lol
I tried this and got no errors, and using cat /proc/mounts/ I see the path as rw. But when I try to copy I still get the read only file system error.
**Lol, I had the phone in usb storage mode and had to switch it to Windows Media Sync**
I am trying to create an overlay folder under /system/vendor so that I can throw a layers apk there to hide the nav bar. I am currently using the build.prop method which doesn't work nicely with the Now on Tap action of Swipe Navigation which is what I am ultimately trying to fix.
I tried using Solid Explorer to simply create the new directory like I did previously in 7.0 and 6.x but was unable to do so (action failed). I decided to try using the terminal and create the folder and move files from there but got the message that the system was read-only. I then attempted to mount system a few different ways all of which failed. I did use su before entering these commands.
Code:
angler:/system/vendor $ mkdir overlay
mkdir: 'overlay': Read-only file system
angler:/system/vendor $ mount -o rw,remount,rw /system
mount: '/dev/block/platform/soc.0/f9824900.sdhci/by-name/system' not user mountable in fstab
angler:/system/vendor $ /system/bin/mount -o rw,remount,rw /system /system
mount: '/system' not in /proc/mounts
angler:/system/vendor $ /system/bin/mount /system
mount: bad /etc/fstab: No such file or directory
Googling around didn't yield much in the way of solutions other than these different methods of mounting system. Am I just unable to mount system as rw in 7.1.1 currently, and if so, is there another way to accomplish what I want?
I'm trying to find thread I read this from, so if I find it I'll post link to it. When I was on early 7 previews that was set up with systemless root I went into twrp and then went to terminal and typed the following, touch su. When your in terminal cd to both bin and xbin and type command "touch su" without quotes. Then reboot and you should be able to use something like es file explorer to get into and write in /system. Hope that helps.
Found it, look to post = 15
http://forum.xda-developers.com/nexus-6p/help/es-file-explorer-doesnt-understand-t3242775
Unfortunately that did not end up working for me, thanks for looking up the link for me though!
On Nougat the rw mount command should be typed like this:
mount -o rw,remount /system
then for touch:
touch sbin/su
Thank you blitz for clarifying.
Hmm... it seems like the mount worked but the touch did not. I ended up using just "touch su" but ran into a different error with mkdir. I think I may just be out of luck for now. Thank you both for your help!
Code:
~ # mount -o rw,remount /system
~ # cd /system/bin
/system/bin # touch sbin/su
touch: sbin/su: No such file or directory
/system/bin # touch su
/system/bin # cd /system/xbin
/system/xbin # touch su
/system/xbin # cd /system/vendor
/vendor # mkdir overlay
mkdir: cannot create directory 'overlay': No space left on device
AbuShabanov said:
Hmm... it seems like the mount worked but the touch did not. I ended up using just "touch su" but ran into a different error with mkdir. I think I may just be out of luck for now. Thank you both for your help!
Code:
~ # mount -o rw,remount /system
~ # cd /system/bin
/system/bin # touch sbin/su
touch: sbin/su: No such file or directory
/system/bin # touch su
/system/bin # cd /system/xbin
/system/xbin # touch su
/system/xbin # cd /system/vendor
/vendor # mkdir overlay
mkdir: cannot create directory 'overlay': No space left on device
Click to expand...
Click to collapse
I'm not sure what you're trying to accomplish but still:
The touch sbin/su means creating an empty file called su in the sbin subdirectory under the current directory. So if there is no subdir named sbin under /system/bin, then it's not going to work
Secondly, you should know about the ls command: ls -la lists the files in the current directory, and remember than in unix and linux terminology, a directory is also a file so you'll also see directories (including current "." and parent "..")
Third, you should know about the df command which shows filesystem disk space usage. df -h will show you how much free space you have an all of your filesystems, including system.
Last, with great power comes great responsibilities. Running the wrong command as root will easily make your system unusable.
I have substratum installed and inside /system/vendor there is a link (again a file) called overlay which links to directory /system/overlay where apks are.
rchtk said:
I'm not sure what you're trying to accomplish
Click to expand...
Click to collapse
I am trying to create an overlay folder under /system/vendor so that I can throw a layers apk there to hide the nav bar.
rchtk said:
I have substratum installed and inside /system/vendor there is a link (again a file) called overlay which links to directory /system/overlay where apks are.
Click to expand...
Click to collapse
Are you on the 7.1.1 (NPF10C)? If so it sounds like you have accomplished what I am trying to do. I'm only familiar with the basic unix commands as I haven't actively used it in about 5 years. Would you mind sharing how to create the link to /system/overlay from /system/vendor, or does Substratum take care of that? Offhand it sounds like a symbolic link but my terminology is pretty rusty.
AbuShabanov said:
I am trying to create an overlay folder under /system/vendor so that I can throw a layers apk there to hide the nav bar.
Are you on the 7.1.1 (NPF10C)? If so it sounds like you have accomplished what I am trying to do. I'm only familiar with the basic unix commands as I haven't actively used it in about 5 years. Would you mind sharing how to create the link to /system/overlay from /system/vendor, or does Substratum take care of that? Offhand it sounds like a symbolic link but my terminology is pretty rusty.
Click to expand...
Click to collapse
Yes 7.1.1.
Substratum created the overlay directory and the link to it.
Manually that would be:
mount -o rw,remount -t auto /vendor
mount -o rw,remount -t auto /system
mkdir /system/overlay
cd /system/vendor
ln -s /system/overlay
mount -o ro,remount -t auto /vendor
mount -o ro,remount -t auto /system
But links do take a very small amount of bytes (roughly name and target) so for that, you'll need some space in your vendor partition (no space left on /vendor). check with "df".
I have 3.8MB free (that's an original vendor + overlay link)
rchtk said:
mount -o rw,remount -t auto /vendor
mount -o rw,remount -t auto /system
mkdir /system/overlay
cd /system/vendor
ln -s /system/overlay
mount -o ro,remount -t auto /vendor
mount -o ro,remount -t auto /system
Click to expand...
Click to collapse
Well, this works and I was able to mount system and vendor, create the link, move the apk file, etc but it appears that the apk itself is not working on NPF10C. Thank you for your help and the refresher on the unix commands!
DISCLAIMER: This tutorial requires root access, so be careful. I'm not taking any responsibility.
This is a quick tutorial on how to enable all system watchfaces on Ticwatch E&S. In order to make this method working it is needed to change the product model. I don't know if ota updates will still work after applied.
Instructions:
1. First of all we need to gain root access. To do this I suggest to follow this thread (thanks to @EpicLPer )
2. Download and unzip the file oem.prop attached to this post. It is a modified version of original file in which I have just modified the product model from "Ticwatch E" (or Ticwatch S") to "Ticwatch E&S"
3. Connect the watch to computer and and send these commands:
Code:
adb push "[I]/directory/to/saved/oem.prop[/I] " /sdcard/download
adb shell
su
mount -o rw,remount /oem
cp /oem/oem.prop /sdcard/download/oem.prop.backup
cp /sdcard/download/oem.prop /oem
mount -o ro,remount /oem
mount -o rw,remount /system
chmod -R 644 /system/app/TicWatchface
mount -o ro,remount /system
reboot
3. Wait for the watch to reboot and don't worry if there is no more any default watchface, it is normal at this point.
4. Connect the watch to computer again and send these commands:
Code:
adb shell
su
mount -o rw,remount /system
chmod -R 755 /system/app/TicWatchface
mount -o ro,remount /system
reboot
5. When the watch is booted there should be all watchfaces on it, both S and E ones.
6. Have fun
elios93 said:
DISCLAIMER: This tutorial requires root access, so be careful. I'm not taking any responsibility.
This is a quick tutorial on how to enable all system watchfaces on Ticwatch E&S.
Instructions:
1. First of all we need to gain root access. To do this I suggest to follow this thread (thanks to @EpicLPer )
2. Connect the watch to computer and and send these commands:
Code:
adb shell
su
mount -o rw,remount /system
chmod -R 644 /system/app/TicWatchface
mount -o ro,remount /system
reboot
3. Wait for the watch to reboot and don't worry if there is no more any default watchface, it is normal at this point.
4. Connect the watch to computer again and send these commands:
Code:
adb shell
su
mount -o rw,remount /system
chmod -R 755 /system/app/TicWatchface
mount -o ro,remount /system
reboot
5. When the watch is booted there should be all watchfaces on it, both S and E ones.
6. Have fun
Click to expand...
Click to collapse
Thanks, I was just working on this and you seem to have found the MUCH easier route than I (editing the APK).
BackCheck said:
Thanks, I was just working on this and you seem to have found the MUCH easier route than I (editing the APK).
Click to expand...
Click to collapse
Well, I was working on your same direction when I found this easier solution!
elios93 said:
Well, I was working on your same direction when I found this easier solution!
Click to expand...
Click to collapse
After reinstalling some apps, I think they reset back to the model defaults. I'm not sure but I think anything that adds or modifies watchfaces causes it to revert.