Database Users

cp: write error: no space left on device in system

I have been having this error message come up using the terminal. I was attempting to add the volume enhancements via Lucid's script on the hybrid JF 1.51 with the HTC apps. I have asked Lucid if he knew how to solve this, but i wanted to see if anyone else might know the solution. I have been searching on here and also on google and yahoo but I have yet to find anything. I even took out my sd card to see if that would help after restarting my phone but nothing. Did i just screw myself?

innerlight said:
I have been having this error message come up using the terminal. I was attempting to add the volume enhancements via Lucid's script on the hybrid JF 1.51 with the HTC apps. I have asked Lucid if he knew how to solve this, but i wanted to see if anyone else might know the solution. I have been searching on here and also on google and yahoo but I have yet to find anything. I even took out my sd card to see if that would help after restarting my phone but nothing. Did i just screw myself?
Click to expand...
Click to collapse
i'm not privvy to lucid's script, but..
remount /system rewrite
do a cp -f to the files you are replacing
remount /system read-only
if you still get no space left, reboot your phone, then try again.

pershoot said:
i'm not privvy to lucid's script, but..
remount /system rewrite
do a cp -f to the files you are replacing
remount /system read-only
if you still get no space left, reboot your phone, then try again.
Click to expand...
Click to collapse
forgive my ignorance but do I type this in terminal as is? Because when I do that it cannot find remount.

I think I found the problem as to why I saw that error. I went from JFs-1.51 US built to the hybrid one that cyanogen did (the JF-1.51 + HTC apps) and I think there maybe something wrong inside there. First wiped and flashed JF's one and then wiped and flashed the cyanogen one and the problem is there.

innerlight said:
forgive my ignorance but do I type this in terminal as is? Because when I do that it cannot find remount.
Click to expand...
Click to collapse
copy the three files needed for the volume increase (2 if your on JF (AudioFilter and AudioPara4)) on to the sdcard in to lets say a directory named 'audio'. make sure you have unmounted the sdcard from within your OS after you have completed the copy, and have unplugged the USB cable.
open up terminal (on your phone)
$ su
# mount -o rw,remount /dev/block/mtdblock3 /system
# cd /sdcard/audio
# mkdir BK
# cp -p /system/etc/Audio* ./BK
# cp -f AudioFilter.csv /system/etc
# cp -f AudioPara4.csv /system/etc
# cp -f AudioPara_TMUS.csv /system/etc
# mount -o ro,remount /dev/block/mtdblock3 /system
# exit
$ exit
bounce your phone.

pershoot said:
copy the three files needed for the volume increase (2 if your on JF (AudioFilter and AudioPara4)) on to the sdcard in to lets say a directory named 'audio'. make sure you have unmounted the sdcard from within your OS after you have completed the copy, and have unplugged the USB cable.
open up terminal (on your phone)
$ su
# mount -o rw,remount /dev/block/mtdblock3 /system
# cd /sdcard/audio
# mkdir BK
# cp -p /system/etc/Audio* ./BK
# cp -f AudioFilter.csv /system/etc
# cp -f AudioPara4.csv /system/etc
# cp -f AudioPara_TMUS.csv /system/etc
# mount -o ro,remount /dev/block/mtdblock3 /system
# exit
$ exit
bounce your phone.
Click to expand...
Click to collapse
Thanks for the reply. I am still getting the same error with the JF-1.51+HTC apps build. I told Cyanogen about it and hopefully he will get it sorted out because his built is faster than the regular JF build. I guess I have to decide if the added HTC apps are worth more than the sound increase.

Terminal command help remount help

I have an Atrix on AT&T. Which means there's a bootloader encryption, and the carrier prevents non-market apk installations, which I have resolved since my phone is rooted and I have changed the boot animation already.
In order to do these things, I found Ghost Commander that would let me chmod my system directories...which is fine, but I feel kind of gimped that I can't do it on terminal.
Basically, what I want to be able to do is remount /system as rw using terminal.
This method doesn't work on both terminal and emulator on my phone. I have done:
Terminal:
Code:
sudo su
cd [sdk directory]
./adb devices
./adb shell
su
mount -o remount,rw -t ext3 /dev/block/mmcblk0p12 /system
and this is where I get stuck because I just get an Invalid argument error.
Here is some info about my sytem -
Usage: mount [-r] [-w] [-o options] [-t type] device directory
/dev/block/mmcblk0p12 /system ext3 ro,noatime,nodiratime, data=ordered 0 0
Been searching for the answers for a while now, and now I'm here. What am I doing wrong? Thanks

there
Code:
mount -o remount,rw /dev/mmcblk0p12 /system
back
Code:
mount -o remount,ro /dev/mmcblk0p12 /system

Hmm, well at least I didn't get any errors this time.
I didn't get a confirmation or that it did anything at all. Is that normal?

Run mount with no parameters and look for the line with that device name, should see rw in that line instead of ro.
Sent from my MB860 using XDA App

Thanks guys, but I resorted to busybox chmod command instead lol

I tried this and got no errors, and using cat /proc/mounts/ I see the path as rw. But when I try to copy I still get the read only file system error.
**Lol, I had the phone in usb storage mode and had to switch it to Windows Media Sync**

[Q][possable solution found??][universal??] data2ext

I have made a file to mount an sdcard second partition to "/data". It needs to go in "/system/etc/init.d/". Can some have a look to tell me if it would work or not as I don't have a partition sdcard.
-Download link: http://db.tt/paxqo1b
Code:
#!/system/bin/sh
if [ -e /dev/block/platform/msm_sdcc.1/by-num/p2 ]
then
busybox mount -o rw,remount -t yaffs2 /dev/block/mtdblock10 /;
busybox umount /data;
busybox mount /dev/block/platform/msm_sdcc.1/by-num/p2 /data;
busybox chown system system /data;
busybox chmod 771 /data;
busybox mount -o ro,remount -t yaffs2 /dev/block/mtdblock10 /;
fi;

Why would you want the whole data partition on the sdcard? It will ruin it a lot quicker, and also slow the phone down if the card isn't fast enough.
Jack

wrongly mounted s4 i9506 = now bricked?

I just rooted my SG S4 Android 5.0.1 with auto-root. Everything worked fine (root complete and SU installed) till I think I gave a bad mount command in the root directory on the phone in terminal (i guess here it went wrong, not sure. Or perhaps during installation of bash or nano) when I was installing bash and nano. Since it rebooted, I **lost the wifi and cannot adb shell into my phone** anymore from mac.
Afterwards, I managed to flash clockwork mod recovery v6.0.4.6. and was able to mount /system, which enabled the ./adb shell again. However i can now only pwd and cd, everything else gets this error: /sbin/sh: ls: Permission denied
I think my phone is still recoverable, however I don't know what to do and don't want to risk making things worse. Which andoird wizard can help me please?
**Below here were my bash nano install commands:**
./adb shell
su
mount -o remount,rw /system
cp -r /storage/extSdCard/bashnano/terminfo /system/etc
cp /storage/extSdCard/bashnano/profile /etc
cp /storage/extSdCard/bashnano/bash /data
cp /storage/extSdCard/bashnano/nano /data
chmod 755 /data/bash
chmod 755 /data/nano
cd /system/bin/
mv sh sh.old
ln -s /data/bash sh
ln -s /data/bash bash
ln -s /data/nano nano
export TERMINFO=/etc/terminfo
export TERM=linux
mount -o remount,ro /system
**P.S. So I also performed a regular mount in root, which i think is what made things bad, but not totally sure!**

ansjovis86 said:
I just rooted my SG S4 Android 5.0.1 with auto-root. Everything worked fine (root complete and SU installed) till I think I gave a bad mount command in the root directory on the phone in terminal (i guess here it went wrong, not sure. Or perhaps during installation of bash or nano) when I was installing bash and nano. Since it rebooted, I **lost the wifi and cannot adb shell into my phone** anymore from mac.
Afterwards, I managed to flash clockwork mod recovery v6.0.4.6. and was able to mount /system, which enabled the ./adb shell again. However i can now only pwd and cd, everything else gets this error: /sbin/sh: ls: Permission denied
I think my phone is still recoverable, however I don't know what to do and don't want to risk making things worse. Which andoird wizard can help me please?
**Below here were my bash nano install commands:**
./adb shell
su
mount -o remount,rw /system
cp -r /storage/extSdCard/bashnano/terminfo /system/etc
cp /storage/extSdCard/bashnano/profile /etc
cp /storage/extSdCard/bashnano/bash /data
cp /storage/extSdCard/bashnano/nano /data
chmod 755 /data/bash
chmod 755 /data/nano
cd /system/bin/
mv sh sh.old
ln -s /data/bash sh
ln -s /data/bash bash
ln -s /data/nano nano
export TERMINFO=/etc/terminfo
export TERM=linux
mount -o remount,ro /system
**P.S. So I also performed a regular mount in root, which i think is what made things bad, but not totally sure!**
Click to expand...
Click to collapse
If you can get into download mode ,flash stock rom from Sammobile

Unable to mount System as rw in 7.1.1 DP

I am trying to create an overlay folder under /system/vendor so that I can throw a layers apk there to hide the nav bar. I am currently using the build.prop method which doesn't work nicely with the Now on Tap action of Swipe Navigation which is what I am ultimately trying to fix.
I tried using Solid Explorer to simply create the new directory like I did previously in 7.0 and 6.x but was unable to do so (action failed). I decided to try using the terminal and create the folder and move files from there but got the message that the system was read-only. I then attempted to mount system a few different ways all of which failed. I did use su before entering these commands.
Code:
angler:/system/vendor $ mkdir overlay
mkdir: 'overlay': Read-only file system
angler:/system/vendor $ mount -o rw,remount,rw /system
mount: '/dev/block/platform/soc.0/f9824900.sdhci/by-name/system' not user mountable in fstab
angler:/system/vendor $ /system/bin/mount -o rw,remount,rw /system /system
mount: '/system' not in /proc/mounts
angler:/system/vendor $ /system/bin/mount /system
mount: bad /etc/fstab: No such file or directory
Googling around didn't yield much in the way of solutions other than these different methods of mounting system. Am I just unable to mount system as rw in 7.1.1 currently, and if so, is there another way to accomplish what I want?

I'm trying to find thread I read this from, so if I find it I'll post link to it. When I was on early 7 previews that was set up with systemless root I went into twrp and then went to terminal and typed the following, touch su. When your in terminal cd to both bin and xbin and type command "touch su" without quotes. Then reboot and you should be able to use something like es file explorer to get into and write in /system. Hope that helps.
Found it, look to post = 15
http://forum.xda-developers.com/nexus-6p/help/es-file-explorer-doesnt-understand-t3242775

Unfortunately that did not end up working for me, thanks for looking up the link for me though!

On Nougat the rw mount command should be typed like this:
mount -o rw,remount /system
then for touch:
touch sbin/su

Thank you blitz for clarifying.

Hmm... it seems like the mount worked but the touch did not. I ended up using just "touch su" but ran into a different error with mkdir. I think I may just be out of luck for now. Thank you both for your help!
Code:
~ # mount -o rw,remount /system
~ # cd /system/bin
/system/bin # touch sbin/su
touch: sbin/su: No such file or directory
/system/bin # touch su
/system/bin # cd /system/xbin
/system/xbin # touch su
/system/xbin # cd /system/vendor
/vendor # mkdir overlay
mkdir: cannot create directory 'overlay': No space left on device

AbuShabanov said:
Hmm... it seems like the mount worked but the touch did not. I ended up using just "touch su" but ran into a different error with mkdir. I think I may just be out of luck for now. Thank you both for your help!
Code:
~ # mount -o rw,remount /system
~ # cd /system/bin
/system/bin # touch sbin/su
touch: sbin/su: No such file or directory
/system/bin # touch su
/system/bin # cd /system/xbin
/system/xbin # touch su
/system/xbin # cd /system/vendor
/vendor # mkdir overlay
mkdir: cannot create directory 'overlay': No space left on device
Click to expand...
Click to collapse
I'm not sure what you're trying to accomplish but still:
The touch sbin/su means creating an empty file called su in the sbin subdirectory under the current directory. So if there is no subdir named sbin under /system/bin, then it's not going to work
Secondly, you should know about the ls command: ls -la lists the files in the current directory, and remember than in unix and linux terminology, a directory is also a file so you'll also see directories (including current "." and parent "..")
Third, you should know about the df command which shows filesystem disk space usage. df -h will show you how much free space you have an all of your filesystems, including system.
Last, with great power comes great responsibilities. Running the wrong command as root will easily make your system unusable.
I have substratum installed and inside /system/vendor there is a link (again a file) called overlay which links to directory /system/overlay where apks are.

rchtk said:
I'm not sure what you're trying to accomplish
Click to expand...
Click to collapse
I am trying to create an overlay folder under /system/vendor so that I can throw a layers apk there to hide the nav bar.
rchtk said:
I have substratum installed and inside /system/vendor there is a link (again a file) called overlay which links to directory /system/overlay where apks are.
Click to expand...
Click to collapse
Are you on the 7.1.1 (NPF10C)? If so it sounds like you have accomplished what I am trying to do. I'm only familiar with the basic unix commands as I haven't actively used it in about 5 years. Would you mind sharing how to create the link to /system/overlay from /system/vendor, or does Substratum take care of that? Offhand it sounds like a symbolic link but my terminology is pretty rusty.

AbuShabanov said:
I am trying to create an overlay folder under /system/vendor so that I can throw a layers apk there to hide the nav bar.
Are you on the 7.1.1 (NPF10C)? If so it sounds like you have accomplished what I am trying to do. I'm only familiar with the basic unix commands as I haven't actively used it in about 5 years. Would you mind sharing how to create the link to /system/overlay from /system/vendor, or does Substratum take care of that? Offhand it sounds like a symbolic link but my terminology is pretty rusty.
Click to expand...
Click to collapse
Yes 7.1.1.
Substratum created the overlay directory and the link to it.
Manually that would be:
mount -o rw,remount -t auto /vendor
mount -o rw,remount -t auto /system
mkdir /system/overlay
cd /system/vendor
ln -s /system/overlay
mount -o ro,remount -t auto /vendor
mount -o ro,remount -t auto /system
But links do take a very small amount of bytes (roughly name and target) so for that, you'll need some space in your vendor partition (no space left on /vendor). check with "df".
I have 3.8MB free (that's an original vendor + overlay link)

rchtk said:
mount -o rw,remount -t auto /vendor
mount -o rw,remount -t auto /system
mkdir /system/overlay
cd /system/vendor
ln -s /system/overlay
mount -o ro,remount -t auto /vendor
mount -o ro,remount -t auto /system
Click to expand...
Click to collapse
Well, this works and I was able to mount system and vendor, create the link, move the apk file, etc but it appears that the apk itself is not working on NPF10C. Thank you for your help and the refresher on the unix commands!