Related
Does anyone know about this model? No one seems to know..
I have one problem. At the moment there are several ways to root galaxy note4, including philz recovery and cf auto root. However, as far as i know it works for only note4 model sm-n910 line. However in korea, upper model for n-910 is released, known as sm-n916 line. Both model have the same hardware and software specs, the only difference is their network connection specs. (N916 has faster and improved data lte connection) . Now the problem is that i have n916 model, and rooting for this device does not work with the method that can root n910 model. I thought it would work because everything software and hardware specs are the same. I am really frustrated because i cant root ㅜ.ㅜ
It's only been a month or twice since its release. The exact model is SM-N916L(LG U plus phone carrier. Alphabet that comes after 916 represents differet phone carriers. S is for skt, and K is for Kt, L is for Lg uplus). It is a upper model for SM-N910L galaxy note 4. You can see that SM-N910L model is present in autoroot([email protected]@eu) but not the upper model SM-N916L. Any ways i could help the developers to enable rooting for this device? perhaps finding you the stock firmware? Demand for this device than previous note4 n910 will increase. Really hope to root this device.
Could i get any help? (Btw i am living in korea using korean model). Really willing to donate if i could root this model!
hope i can get a reply as soon as possible. Have a good day~
sm-n916k , I also want to root
SM-N916K , i want root this phone ...
k is KT 's model .S is SKT ,L is LGT
plz root this device ,,,
Note 4 S-LTE
5.0.1 N916KKTU1BOB2
Thank you~
please me 2 cant find it anywhere
adicartson said:
please me 2 cant find it anywhere
Click to expand...
Click to collapse
sm-n916k said:
SM-N916K , i want root this phone ...
k is KT 's model .S is SKT ,L is LGT
plz root this device ,,,
Note 4 S-LTE
5.0.1 N916KKTU1BOB2
Thank you~
Click to expand...
Click to collapse
coolion said:
Does anyone know about this model? No one seems to know..
I have one problem. At the moment there are several ways to root galaxy note4, including philz recovery and cf auto root. However, as far as i know it works for only note4 model sm-n910 line. However in korea, upper model for n-910 is released, known as sm-n916 line. Both model have the same hardware and software specs, the only difference is their network connection specs. (N916 has faster and improved data lte connection) . Now the problem is that i have n916 model, and rooting for this device does not work with the method that can root n910 model. I thought it would work because everything software and hardware specs are the same. I am really frustrated because i cant root ㅜ.ㅜ
It's only been a month or twice since its release. The exact model is SM-N916L(LG U plus phone carrier. Alphabet that comes after 916 represents differet phone carriers. S is for skt, and K is for Kt, L is for Lg uplus). It is a upper model for SM-N910L galaxy note 4. You can see that SM-N910L model is present in autoroot([email protected]@eu) but not the upper model SM-N916L. Any ways i could help the developers to enable rooting for this device? perhaps finding you the stock firmware? Demand for this device than previous note4 n910 will increase. Really hope to root this device.
Could i get any help? (Btw i am living in korea using korean model). Really willing to donate if i could root this model!
hope i can get a reply as soon as possible. Have a good day~
Click to expand...
Click to collapse
Make a backup before and if something goes wrong you should have the firmware files at hand to revert changes, you will be responsible for anything you do with your device.
TWRP 2.8.7.0 for N916SKL:
https://mega.nz/#!8lpjxKrS!LnuJm-nZjBDpNgYoXE8G4zRW0kh6Yy3uqEUAAlOAvF4
Try flashing SuperSU from the custom recovery:
https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
how to work with the zip file to root
odin need a tar file to root
a help please cant find a way to install the zip file
adicartson said:
how to work with the zip file to root
odin need a tar file to root
a help please cant find a way to install the zip file
Click to expand...
Click to collapse
I have converted the recovery file to .tar you can flash it through Odin now.
your recovery in not the correct one.
any custom rom with multi lang for n916l ?
Battlehero said:
[/url]
Click to expand...
Click to collapse
not workable TWRP , i tested on n916l , 6.0.1
I have the same issue note 4 n916k KT
I wanted to root my phone so bad.
If you guys rooted your phone successfully let me know please
Yes install clockwork mode then cf auto root.
Use Odin
Always remove battery when done and phone is about to restart and then put battery back into phone.
Battlehero said:
Make a backup before and if something goes wrong you should have the firmware files at hand to revert changes, you will be responsible for anything you do with your device.
TWRP 2.8.7.0 for N916SKL:
https://mega.nz/#!8lpjxKrS!LnuJm-nZjBDpNgYoXE8G4zRW0kh6Yy3uqEUAAlOAvF4
Try flashing SuperSU from the custom recovery:
https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
Click to expand...
Click to collapse
Recovery is not working in Odin, even the updated .tar file.
UNIT Details:
SM-N916L (Rooted via CF-Auto Root)
Android: 6.0.1
Baseband: N916LKLU1DPK2
KERNEL: 3.10.9-9907293
BUILD # MMB29K.N916LKLU2DPK2
If anyone can guide me to a good stable custom rom for N916L it will be appreciated and thanks in advance.
well found the below links, posting here might help someone.
Root & Recovery:
https://samsungvn.com/threads/tong-hop-root-recovery-6-0-1-cho-note-4-tat-ca-cac-phien-ban.20003/
https://samsungvn.com/threads/tong-hop-cho-note4-han-n910-n916-slk.7317/
ROMS:
https://samsungvn.com/diendan/galaxy-note-4-android-development.185/
misbah711 said:
Recovery is not working in Odin, even the updated .tar file.
UNIT Details:
SM-N916L (Rooted via CF-Auto Root)
Android: 6.0.1
Baseband: N916LKLU1DPK2
KERNEL: 3.10.9-9907293
BUILD # MMB29K.N916LKLU2DPK2
If anyone can guide me to a good stable custom rom for N916L it will be appreciated and thanks in advance.
well found the below links, posting here might help someone.
Root & Recovery:
https://samsungvn.com/threads/tong-hop-root-recovery-6-0-1-cho-note-4-tat-ca-cac-phien-ban.20003/
https://samsungvn.com/threads/tong-hop-cho-note4-han-n910-n916-slk.7317/
ROMS:
https://samsungvn.com/diendan/galaxy-note-4-android-development.185/
Click to expand...
Click to collapse
The recoveries were never meant for Marshmallow since those devices were running Android Lollipop.
The Android Marshmallow update for those devices had come out much later on.
Battlehero said:
The recoveries were never meant for Marshmallow since those devices were running Android Lollipop.
The Android Marshmallow update for those devices had come out much later on.
Click to expand...
Click to collapse
I flashed 2.8.7.0 and was stuck in boot loop.
Now I found the following will they work?
link of site (https://samsungvn.com/threads/tong-hop-cho-note4-han-n910-n916-slk.7317/)
TWRP 3.0.2.0 => Use for 6.0.1
TWRP 2.8.7.0 => Use for 5.1.1 and 6.0.1
General link pooling (2.8.7.0 and 3.0.2.0) for the SLK N910_N915_N916, of which there are 2 types :
File zip => flash through recovery
File tar => flash via Odin (from flash recovery 2 times)
TWRP 2.8.7.0 for N910_N915_N916SLK
https://drive.google.com/drive/folders/0BymXcmDRZdl9QnhvUnhEM3ZwMGM
I also have a n916 but it is a n916l
I can root it by cf... but i can't recovery twrp or cwm to up rom because the file to recovery twrp or cwm (also n916sk) don't have in it
If someone know how to recovery twrp or cwm (n916skl),please help me
Thanks for your help very much
nougat firmware for note 4 sm-n916l
i want to update my note 4 sm-N916L to Nougat android version,any links would be appreciated.thanks a lot
Here is the page to get the file to root the SM-N916 S/K/L variants. It is in Korean, but you can easily find your file.
https://blog.naver.com/PostView.nhn?blogId=bluedaths&logNo=220898478535&categoryNo=28&proxyReferer=
Here is where you can get the latest version of Odin.
https://samsungodin.com/download/
Here is where to find TWRP for the SM-N916 S/K/L
https://drive.google.com/drive/folders/0BymXcmDRZdl9QnhvUnhEM3ZwMGM
It will give an error about seandroid, but it works.
---------- Post added at 09:52 AM ---------- Previous post was at 09:50 AM ----------
beaterocampo said:
i want to update my note 4 sm-N916L to Nougat android version,any links would be appreciated.thanks a lot
Click to expand...
Click to collapse
Here is a working Nougat 7.0.
https://forum.xda-developers.com/note-4/development/rom-refined-nougat-n7fe-port-alpha-1-t3804371
Can anyone help me. I'm have problems. I have the sm-n916s. It's korean (I'm in WA state) (Note4 S-LTE)
build N916SKSU2DSA1
I'd love to root. Anyone know if I can get Lineage OS working on this Korean flavoured Galaxy Note 4? ALso A lot of the links above are not alive anymore...does anyone have live links to root ware and firmware? THANKS!!
ideally i'd like to just flash it even to a normal north american firmware vers of note 4 if i cannot get lineage..
Once rooted can i use any note 4 firmware....or does it have to be the one specifically for this korean note 4....thanks you!
ethanscooter said:
I forgot to include this, I forgot to include a lot of information (please don't hate me) the pre-made tars were for 5.11, this guide was originally for 5.1.1 but when I updated this I was not paying attention and all I thought that is that it would work right away like a complete idiot.
Listen to @lilrowrow as he may be correct, if not you have to use a kernel for your device that is FOR 6.0.1..
Click to expand...
Click to collapse
^^ This guide was originally written for a 5.1.1 update to the S6 (SK) a few months back, the SAME method should be able to be applied to 6.0.1 you just need to use a 6.0.1 kernel for YOUR device or TRY to not use one at all, however the method is very similar.
New firmware was made for the Galaxy S6 and S6 edge (G920S) which you can flash in odin the new update has the new Note 5/S6 edge+ UI and other features. I will be showing you how to flash it on any S6 or S6 edge!
Why would you need to do this? Simple, because if you just tried to flash this firmware on a normal S6 or S6 edge in odin you will get a FAIL! All we are doing is flashing just the main files and not the bootloader, e.t.c
You now only need to do this guide if you are on a T-Mobile S6 or S6 edge or you have an international S6 EDGE phone/925I and want the s6 edge features.
You can download the tar I premade so you don't have to use this guide (only for non Tmobile/W8 variants unless you don't want call audio)
Download my premade tar for the S6 flat (flashable on edge) based off of South Korean firmware. 5.1.1
Download my premade tar for the S6 edge (flashable on flat) based off of South Korean firmware. 5.1.1 not 6.0.1
*New* Download my premade tar for the S6 flat (flashable on edge) based off of international firmware not South Korean) 5.1.1 not 6.0.1
EDIT: The S6 edge permade tar based off of international firmware will be coming soon, for now use the South Korean one, the only difference is the extra bloat.
I used unikernel so it should work on any model including the G920T but if you use it on the 925T or 920T or W8 models then call audio wont work and you will need to follow this guide. The reason is unikernel and the call audio fix don't work well together it has tons of glitches the only kernel the call audio fix works on is arters kernel and he doesn't want anyone to redistribute it ;( so you need to make your own tar manually with his kernel which I talk about doing in the guide I also give you links to the kernel. If you are on any other S6 or S6 edge besides W8 and T-mobile then you can flash away from the link I posted earlier call audio works right away but remember you can flash it on the S6 edge you just wont have the edge features. If you need the edge features use the guide below I wrote for you!
Once again if you have the 920/25T or 920/25W8 and you want call audio follow this guide don't flash my premade tar use step 6.1 instead of 6 and follow step 15!
YOU NEED TO BE ON THE 5.1.1 BASEBAND I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE YOU HAVE BEEN WARNED!
TESTED ON G920T, G920F
THE FINGERPRINT SCANNER IS WORKING!!!
Step 1
Head over to SamMobile and download the firmware for the S6 flat Mirror
For the S6 edge
Firmware for S6 edge is here! Mirror
Step 2
Once the firmware is downloaded leave it in the downloads folder and download Cygwin terminal
Download Cygwin
When cygwin is installed open it and close it (I don't know why but certain folders didn't show up until I did that)
Step 3
Navigate to C:\cygwin64\home\(Your name)\
Step 4
Extract the firmware we downloaded earlier and you will get the .tar.md5 file rename it so the extension is just .tar
Step 5
Open the .tar file with winrar and extract system.img, and recovery.img
Step 6 (International/K/I/L only)
Download Unikernel for your S6 edge (only if you're getting S6 edge features for international devices only, not for W8/Tmus) Download Unikernel
Step 6.1 (T-mobile only)
Use @arter97's kernel Download arters kernel for S6 flat use this even if you're using the G925S firmware but your actual hardware is S6 flat.
For S6 edge users on tmobile/W8 use the same kernel but this is the link to the edge version of @arter97's kernel Download arters S6 edge kernel use that even if you're using the S6 flat korean firmware but your actual hardware is the S6 edge.
Step 7
When you have the ZIP/tar to the kernel you downloaded extract the boot.img from the zip/tar to the folder I mentioned earlier where system.img and recovery.img are.
Step 8
Open cygwin terminal and type
Code:
tar -H ustar -c recovery.img boot.img system.img > Update.tar
When that is done (make take 3-5 minutes) drag the newly created .tar file to your desktop it will be located exactly where the system.img, boot,and recovery were located (C:\cygwin64\home\(Your name)\)
Step 9
Go on your phone and enter download mode don't forget to download and extract odin to your desktop Odin Download
Step 10
Open odin and click AP make sure re-partition is UNCHECKED! <- I cannot express that enough
Step 11
Select the Update.tar which was on your desktop (or somewhere else) and click start IT IS NOW FLASHING!
Step 12
When the .tar file is finished flashing and your phone starts to reboot hold volume down and power while its booting into the newly installed firmware and wait for the phone to turn off when you see a black screen quickly switch to volume up and power and home to enter recovery mode
Step 13
When you are in recovery mode use the volume up and down keys to select wipe data and factory reset then when that is done wipe cache.
Step 14
Reboot and enjoy!
*Step 15 (only if you have a G920T or W8)
Flash TWRP in odin and then reboot into recovery and flash this Download the call audio fix this is not made by me it is made by Mr. X Link to call audio fix original thread
Remember everything is working including the fingerprint scanner you can use this until @arter97 releases the update then I strongly recommend flashing his Note 5 ROM
Note 5 ROM thread link
I also recommend the S6E+ ROM if you are on the S6 edge that can be found here:
Link to S6E+ ROM thread for normal S6E
EDIT: ADDED SCREENSHOTS
ethanscooter said:
Good news! Soon G92xF and G92xI will be able to flash just one .tar file and the update will be installed they still have to perform a wipe in recovery I will editing the guide soon remember if you're on T-Mobile or have a W8 model you will have to follow the guide sorry.
ethanscooter said:
If you are an edge user and want to flash my file that I will be uploading soon I will only be uploading the S6 flat tar "port" with unikernel that means it will flash perfectly fine but you edge features wont work unless you make your own .tar with the guide!
Click to expand...
Click to collapse
Remember unikernel supports these models "Galaxy S6 920 F / I / S / K / L / T / W8" "Galaxy S6 925 F / I / S / K / L / T / W8" <-taken from his thread, anyways that means that when you flash my tar file it will work with unikernel but if you try flashing the call audio fix then its really glitchy and crashes and sometimes the phone reboots out of nowhere and the only kernel I know of that doesnt crash the phone when you flash the call fix on tmobile is arters awesome kernel but he doesn't want anyone to redistribute it, its all a matter of do you want call audio on your G920T or 25T or not...other models don't have this problem...Also the guide supports any of the models that unikernel supports the original unikernel thread can be found Here
Click to expand...
Click to collapse
Edit: According to @okolobaccess the RAM issue is fixed in this version.
Edit2: I added a mirror on Step 1 just click the word mirror next to the sammobile link I made the mirror because SamMobile is really slow at the moment.
Some screen shots? :c pls?
Enviado desde mi SM-G925I mediante Tapatalk
Hi friend, thanks for your tip!
I was thinking here: if i'm follow your instructions, using files from my S6 Edge SM-G925i (recovery.img, boot.img and etc..), the system file from SM-G920S (system.img) and create a new tar files to flash in odin, you think i'll void my knox counter? Doing this, i assuming that i'm only changing the system.img and creating my own firmware file, no?
Thanks
vennon! said:
Hi friend, thanks for your tip!
I was thinking here: if i'm follow your instructions, using files from my S6 Edge SM-G925i (recovery.img, boot.img and etc..), the system file from SM-G920S (system.img) and create a new tar files to flash in odin, you think i'll void my knox counter? Doing this, i assuming that i'm only changing the system.img and creating my own firmware file, no?
Thanks
Click to expand...
Click to collapse
Please dont do anything yet the system.img for yours because you have the s6 edge is here http://www.sammobile.com/firmwares/download/53544/G925SKSU2COH7_G925SSKC2COH7_SKC/ I put that link in the OP, also the boot.img you should use for yours is here http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
I just reverted to stock because I need tmobile wifi calling...oh its fine I'll just go back to take a screenshot for you I will be attaching them to the first post keep looking out for them!
ethanscooter said:
Please dont do anything yet the system.img for yours because you have the s6 edge is here http://www.sammobile.com/firmwares/download/53544/G925SKSU2COH7_G925SSKC2COH7_SKC/ I put that link in the OP, also the boot.img you should use for yours is here http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Click to expand...
Click to collapse
Don't worry buddy, i'm know the differences between this two models (Edge and flat), thanks for you advise!
I'm now downloading the firmware below on SamFirm app:
Checking firmware for SM-G925S/SKC/G925SKSU2COH7/G925SSKC2COH7/G925SKSU2COH5
Model: SM-G925S
Version: G925SKSU2COH7/G925SSKC2COH7/G925SKSU2COH5/G925SKSU2COH7
OS: Lollipop(Android 5.1.1)
Filename: SM-G925S_1_20150818103153_tlv32i4dpc.zip.enc4
Size: 1566970528 bytes
LogicValue: 2mo6jcwdczh98zse
Trying to download SM-G925S_1_20150818103153_tlv32i4dpc.zip.enc4
Waiting to finish the download and make my own odin firmware pack. So, as i said before, you think doing this will trip my knox counter?
I need to use Unikernel or i can use my stock kernel??
thankss again!
vennon! said:
Don't worry buddy, i'm know the differences between this two models (Edge and flat), thanks for you advise!
I'm now downloading the firmware below on SamFirm app:
Checking firmware for SM-G925S/SKC/G925SKSU2COH7/G925SSKC2COH7/G925SKSU2COH5
Model: SM-G925S
Version: G925SKSU2COH7/G925SSKC2COH7/G925SKSU2COH5/G925SKSU2COH7
OS: Lollipop(Android 5.1.1)
Filename: SM-G925S_1_20150818103153_tlv32i4dpc.zip.enc4
Size: 1566970528 bytes
LogicValue: 2mo6jcwdczh98zse
Trying to download SM-G925S_1_20150818103153_tlv32i4dpc.zip.enc4
Waiting to finish the download and make my own odin firmware pack. So, as i said before, you think doing this will trip my knox counter?
I need to use Unikernel or i can use my stock kernel??
thankss again!
Click to expand...
Click to collapse
Sometimes it doesnt boot unless you use Unikernel (if you have a tmobile S6 use arters)
ethanscooter said:
Sometimes it doesnt boot unless you use Unikernel (if you have a tmobile S6 use arters)
Click to expand...
Click to collapse
humm ok! i'll try anyway, if i don't have success, i'll back to ZTO (wicth is my default rom)...
And what about Knox, you know if will trip it, if i use the stock kernel?
vennon! said:
humm ok! i'll try anyway, if i don't have success, i'll back to ZTO (wicth is my default rom)...
And what about Knox, you know if will trip it, if i use the stock kernel?
Click to expand...
Click to collapse
knox will trip either way and when you use the stock kernel on this you will get stuck at the Galaxy S6 splash screen but let me tell you a little secret in the U.S (I dont know about other countries) I have returned phones for warranty with knox tripped once I had flashing problems with an LG phone and I had trouble with the flash tool so I took it to best buy they tried wiping it and when the tried to wipe it, it booted into TWRP and they didn't even care they said it was "defective" and gave me a new phone no problem! You should not be scared of tripping your KNOX counter just use a strong case and try not to brick it this method shouldn't brick your phone though.
When you are done flashing report back so I can add your model number to the list of devices its been tested on!
Now I'm wondering if you flash this bootloader under BL in odin then do follow my guide will knox still trip? Someone try this its for the S6 and Edge on T-Mobile http://androiding.how/root-t-mobile-s6-and-s6-edge-on-5-1-1-without-tripping-knox-counter/ (sboot.bin is the bootloader) I would try it but I already tripped knox.
ethanscooter said:
knox will trip either way and when you use the stock kernel on this you will get stuck at the Galaxy S6 splash screen but let me tell you a little secret in the U.S (I dont know about other countries) I have returned phones for warranty with knox tripped once I had flashing problems with an LG phone and I had trouble with the flash tool so I took it to best buy they tried wiping it and when the tried to wipe it, it booted into TWRP and they didn't even care they said it was "defective" and gave me a new phone no problem! You should not be scared of tripping your KNOX counter just use a strong case and try not to brick it this method shouldn't brick your phone though.
When you are done flashing report back so I can add your model number to the list of devices its been tested on!
Click to expand...
Click to collapse
oks, here in brazil i don't know if i have the knox tripped and need to return the phone (as you said), i'll have problems about warranty...so i'm little afraid to do this steps..if i decide to do, i'll let you know!
thanks for the answers an the patience buddy!
vennon! said:
oks, here in brazil i don't know if i have the knox tripped and need to return the phone (as you said), i'll have problems about warranty...so i'm little afraid to do this steps..if i decide to do, i'll let you know!
thanks for the answers an the patience buddy!
Click to expand...
Click to collapse
Wait if you already have flashed a ROM with TWRP before then knox is tripped ;(
Flashing this on my phone...again as stated before I went back to stock because I needed wifi calling I will take a screenshot when its done I should've done this before very sorry!
My knox is intact until today haha!
Enviado de meu SM-G925I usando Tapatalk
vennon! said:
Hi friend, thanks for your tip!
I was thinking here: if i'm follow your instructions, using files from my S6 Edge SM-G925i (recovery.img, boot.img and etc..), the system file from SM-G920S (system.img) and create a new tar files to flash in odin, you think i'll void my knox counter? Doing this, i assuming that i'm only changing the system.img and creating my own firmware file, no?
Thanks
Click to expand...
Click to collapse
And it work on 925i? I want use it..
Enviado desde mi SM-G925I mediante Tapatalk
vennon! said:
My knox is intact until today haha!
Enviado de meu SM-G925I usando Tapatalk
Click to expand...
Click to collapse
Did you do it yet?
pollosmon said:
And it work on 925i? I want use it..
Enviado desde mi SM-G925I mediante Tapatalk
Click to expand...
Click to collapse
Check out the screenshots I just uploaded and yes it should thanks to unikernel make sure you use it I edited the post 20 minutes ago with the unikernel link. See step 6 for the unikernel link make sure you don't accidentally the link for the other kernel unikernel works on edge and the normal S6.
ethanscooter said:
Did you do it yet?
Click to expand...
Click to collapse
No dude, not yet, but i'm thinking about...
Why??: if i update to the 5.1.1 and need root, only way is change the kernel. If i change kernel, this will trip my knox and prevent me to use the "private mode" because the system will show me the status "Permissive"...understand my afraid? kkkkk
vennon! said:
My knox is intact until today haha!
Enviado de meu SM-G925I usando Tapatalk
Click to expand...
Click to collapse
I just realized the only reason I had to make this long guide is because I wanted to use @arter97's kernel but I just realized non-tmobile variants have to use unikernel anyways so I could just make the long guide for tmobile users and then make the flashable tar myself with unikernel as the boot.img for international and 920I variants and then add at the top "if you have an international or 920i/925i S6 you can just flash this *insert link to the file I uploaded here* but if you have a T-Mobile/W8 S6 please follow this guide". Do you think that would work, buddy?
pollosmon said:
And it work on 925i? I want use it..
Enviado desde mi SM-G925I mediante Tapatalk
Click to expand...
Click to collapse
If you use the system.img file from THIS ROM, as we commented above, i think so! :good:
i see too much users asked for your N920S/K/L can flash custom rom and kernel of N920C for yours .
And now i will say " From android 6.0.1 MM , korea variants N920S/K/L can running good all ROM + KERNEL of N920C without issued "
In 5.1.1 Korea variant can not but on 6.0.1 MM Samsung has changed somethings and Now korea variant are the same as N920C .
*Note:
-Only Rom and kernel of N920C can running, Bootloader and modem still not .
- I saw some users using N920i and N920G can running rom + kernel of N920C good ,too.
Now we are truly a family
ksr007 said:
i see too much users asked for your N920S/K/L can flash custom rom and kernel of N920C for yours .
And now i will say " From android 6.0.1 MM , korea variants N920S/K/L can running good all ROM + KERNEL of N920C without issued "
In 5.1.1 Korea variant can not but on 6.0.1 MM Samsung has changed somethings and Now korea variant are the same as N920C .
*Note:
-Only Rom and kernel of N920C can running, Bootloader and modem still not .
- I saw some users using N920i and N920G can running rom + kernel of N920C good ,too.
Now we are truly a family
Click to expand...
Click to collapse
Thanks for the news,have you tested?
vongkachon said:
Thanks for the news,have you tested?
Click to expand...
Click to collapse
yes ! i'm using N920K and my friends using n920S/L has tested .
So you're meaning my N920I can use the ROM and kernel of N920C as well? Thanks
Recovery request!
ksr007 said:
yes ! i'm using N920K and my friends using n920S/L has tested .
Click to expand...
Click to collapse
Thanks for the useful post @ksr007 ... By any chance u might have or know where I can get it TWRP recovery for the Korean N920L (6.0.1)? Thanks in adv!
Ksingle007 said:
Thanks for the useful post @ksr007 ... By any chance u might have or know where I can get it TWRP recovery for the Korean N920L (6.0.1)? Thanks in adv!
Click to expand...
Click to collapse
Here : http://www.mediafire.com/download/yh60j8hf2242g9p/twrp-3.0.0-3-M-noblelte.tar.md5
or newer version : https://idlekernel.com/twrp/noblelte/3.0.2-1/
ksr007 said:
Here : http://www.mediafire.com/download/yh60j8hf2242g9p/twrp-3.0.0-3-M-noblelte.tar.md5
or newer version : https://idlekernel.com/twrp/noblelte/3.0.2-1/
Click to expand...
Click to collapse
Thanks a lot mate
Really???
Can i flash this kernel (http://forum.xda-developers.com/not...ernel-skyhigh-tw-6-0-1-kernel-t3321646/page79) on N920S????
ksr007 said:
i see too much users asked for your N920S/K/L can flash custom rom and kernel of N920C for yours .
And now i will say " From android 6.0.1 MM , korea variants N920S/K/L can running good all ROM + KERNEL of N920C without issued "
In 5.1.1 Korea variant can not but on 6.0.1 MM Samsung has changed somethings and Now korea variant are the same as N920C .
*Note:
-Only Rom and kernel of N920C can running, Bootloader and modem still not .
- I saw some users using N920i and N920G can running rom + kernel of N920C good ,too.
Now we are truly a family
Click to expand...
Click to collapse
No. You are wrong.
Whilst you may be able to flash certain things, doesn't mean that it will be without errors, warnings in logs. Mismatch errors/warnings in logs due to mismatch bootloader, modem, kernel images etc. they can also lead to panic. Missing permissions and file/entries from kernel ramdisk == UN-optimised device.
There are many differences in kernel source, so using a different a N920C kernel will have issues with missing and wrong drivers compiled.
For N920 Korean variant user, I advise not to flash what's not designed for your variant. I can't stop you, but if you flash my SkyHigh kernel, please do not post in my thread. I DO NOT SUPPORT (or intend) KOREAN VARIANT. You will be on your own. Thanks.
Hello everyone. I baught note 7 in my country exynos Model completely safe in my opinion and Samsung made me returned for total unsuport of device. So I bought note 5 with are very rarely also in my country. N 920S Korean variant. Coming from note 7 was decently a big downgrade a ll aspect but in the end with root grenify a custom Rom port note 7 thing begin to work well. I use minotaurus v5 port n7. Work very well all note 7 feature except hardware iris, panorama in camera and aod. Battery was awefoll at beginning but after root grenify and a few tricks I was able to have 3 or 4 hours sot. I rea my can't find a stock kernel for 6.0.1. I hear that is best to use a stock kernel in the Rom that I have by can't find it. Please share any link for stock or custom kernel 6.0.1. That works or you try for 920s model. Thanks in advance.
Sent from my SM-N930F using Tapatalk
Please help me to find last bootloader and modem for 920s korean. I think there are only on korean site. Thanks in advance!
Skyhight kernel can run on C but not 9n N920L
Can someone make it works?
Infinity kernel run very well on 920s with aod and gear vr with minotaurus rom port for note 7
Sent from my SM-N920S using Tapatalk
I hope N9208 can run the same kernel with the others variant too :'(
Anyone install 7.0 update on 920s. please upload a backup!
Sent from my SM-N920S using Tapatalk
Hello. I am new here and sorry if broke any rules.
I have note 5 n920L. Bought it used. Received update 7.0. After it, it worked for 2 days and than started working slowly. Restarted and after restart I saw blue screen - "installing system updates". The same screen was for 10 hours. It could not load into recovery mode for wiping. It could not install firmware from download mode. Cannot add here photos because do not have 10 posts.
When trying installing firmware, odin stops on system.img.
When trying recovery mode, it does not enters there.
I see recovery mode after hours trying installing system updates. When I click on wipe data or cache, I have errors:
supported api: 3
dm-verify verification failed
e: failed to mount cache (invalid argument)
e: cannot mount cache recovery last install and many other similar errors
FRP IS LOCKED. STATUS IS CUSTOM (do not know how and why, if it was custom could not receive update..)
hi everyone. at first sorry for my english, i'm not an american or something like this. i've got a problem. my phone is Samsung Galaxy S4 as you already know. i want to flash a port Note 5 v2.5 by Albe95 but i don't want to do that incorrectly. on my phone i've got installed S6 port v3.0 by Albe95. i've already read a post about flashing that port but the question is can i just flash that port without any problems? i flashed a twrp and i've got a root if it would be necessary and the next step is flashing the latest modem and bootloader for Lollipop on Galaxy S4. actually my modem on S6 port is i9505XXUHOB8 (kernel - Imperium Kernel v2.1). will it be everything okey with my phone if i'll just flash the latest modem and bootloader on this S6 port with different modem etc. and next flash a port Note 5? thank you all from the advance. you all do a great job at this forum!
There is no reason to flash a different modem and bootloader if the instructions don't explicitly say so.
the instruction says "Update your Modem & Bootloader to the Latest Lollipop Ones by following this Guide". if i won't do that my network probably won't be working.
This is just a safe upgrade to the latest CQA1 firmware for the SM-N910V. If you are already on 6.0 with an unlocked bootloader you can flash this to update. It will not lock your bootloader or overwrite your custom recovery. I slightly debloated it but other than that it's completely stock and still odexed.
INSTRUCTIONS
- Boot to recovery and do a complete wipe (everything except your internal and external sd card)
- Power off device and pull battery for at least 3 seconds
- Boot into Download mode and connect phone to your computer
-Start Odin and place the tar file in the AP slot
-Once Odin says it's ready just press start and let it do it's thing
CQA1 FIRMWARE DOWNLOAD
If you would like to run stock you can download and flash SuperSu for root and also Busybox by Osmosis
Thanks will try later!
Thanks, I'll give it a look over.
Developers don't need no stinkin' signature! If I've been able to help you, please hit the "Thanks" button.
Absolutely flawless!
Developers don't need no stinkin' signature! If I've been able to help you, please hit the "Thanks" button.
What's the changes?
Rahul721 said:
What's the changes?
Click to expand...
Click to collapse
Just some security patches and minor bug fixes.
THREAD MOVED
Since this thread doesn't involve any development, it has been moved to the General section which is appropriate for guides/how-to threads. Please review the sticky in the development section titled "RULES for posting in Development" if you have any questions.
Sent from a government terminal using my sonic screwdriver
kevintm78 said:
This is just a safe upgrade to the latest CQA1 firmware for the SM-N910V. If you are already on 6.0 with an unlocked bootloader you can flash this to update. It will not lock your bootloader or overwrite your custom recovery. I slightly debloated it but other than that it's completely stock and still odexed.
INSTRUCTIONS
- Boot to recovery and do a complete wipe (everything except your internal and external sd card)
- Power off device and pull battery for at least 3 seconds
- Boot into Download mode and connect phone to your computer
-Start Odin and place the tar file in the AP slot
-Once Odin says it's ready just press start and let it do it's thing
CQA1 FIRMWARE DOWNLOAD
If you would like to run stock you can download and flash SuperSu for root and also Busybox by Osmosis
Click to expand...
Click to collapse
@kevintm78
is there any safe upgrade from KK ( unlocked bootloader ) to MM without locking bootloader
machhho said:
@kevintm78
is there any safe upgrade from KK ( unlocked bootloader ) to MM without locking bootloader
Click to expand...
Click to collapse
No buddy there isn't. The issues you'll have will vary when trying to upgrade the firmware without updating the bootloader. Mostly wifi related and brightness issues. All of the safe upgrades remove the aboot so it wouldn't update your bootloader.
Delete - double post
OK, I am on BPA1. Lollipop - Marshmallow combo. Bootloader unlocked, root, etc. Running the 05/24/2016 Hsbadr CM 13.1 build. Can, I flash this and keep the unlocked bootloader or do I have to go through the whole downgrade to the BPA1 firmware, re-root and all that jazz? I just can't believe there is not an easier way to get to Marshmallow-Marshmallow since the bootloader is unlocked.
kerfex said:
OK, I am on BPA1. Lollipop - Marshmallow combo. Bootloader unlocked, root, etc. Running the 05/24/2016 Hsbadr CM 13.1 build. Can, I flash this and keep the unlocked bootloader or do I have to go through the whole downgrade to the BPA1 firmware, re-root and all that jazz? I just can't believe there is not an easier way to get to Marshmallow-Marshmallow since the bootloader is unlocked.
Click to expand...
Click to collapse
Yes . doesn't contain aboot :victory: but the bootloader didn't change it isn't necessary or particularly useful unless you wanted to builds a touchwiz based ROM and wanted to use the most recent base .
---------- Post added at 11:04 PM ---------- Previous post was at 11:00 PM ----------
mojoswagger1980 said:
Yes . doesn't contain aboot :victory: but the bootloader didn't change it isn't necessary or particularly useful unless you wanted to builds a touchwiz based ROM and wanted to use the most recent base .
Click to expand...
Click to collapse
And no lol if you took the safe upgrade from 5.1.1 to 6.0.1 (via the lollipop ROM on marshmallow toolchain) you are currently on an up to date bootloader it is unneccesarry to repeat the unlock procedure and no this doesn't lock your bootloader . it isn't rooted however you would need to flash that but it is a one and done via twrp . kingroot wasn't needed.
successfully unlocked on 910V but want to know
Can I flash 910F stock firmware via odin on my unlocked verizon 910V note 4. I want to convert it to GSM phone. Should I need to install custom recovery or permanent root before for this. Or is it possible and safe to convert without loosing sim connectivity. Please help.
Hello everyone! Been quite a while since I've been on here. I have been on the Kyubi ROM since the BL unlock was achieved on our Note4. IMO, it has been a pretty stellar ROM. Been using it ever since. Now, I have decided to upgrade the device.
I want to upgrade to at least a 6.0 ROM and I am on 5.1.1 BL version is BPA1, PDA version is BOK3 and Baseband Version is BPA1 as well, rooted and BL is unlocked.
My question is can I do this "CQA1 Firmware *safe upgrade* SM-N910V" in the OP without any problems?
Thanks in advance for any and all help with this...
stajam said:
Hello everyone! Been quite a while since I've been on here. I have been on the Kyubi ROM since the BL unlock was achieved on our Note4. IMO, it has been a pretty stellar ROM. Been using it ever since. Now, I have decided to upgrade the device.
I want to upgrade to at least a 6.0 ROM and I am on 5.1.1 BL version is BPA1, PDA version is BOK3 and Baseband Version is BPA1 as well, rooted and BL is unlocked.
My question is can I do this "CQA1 Firmware *safe upgrade* SM-N910V" in the OP without any problems?
Thanks in advance for any and all help with this...
Click to expand...
Click to collapse
No, unfortunately there currently isn't an easier process than the one that is outlined in this thread. I had some different intentions with this firmware when I was putting it together and some personal stuff came up so I just posted it as is but you'll need to update your bootloader or you'll have wifi issues with the 6.0 roms.
It's my understanding, though I haven't tested it personally, that's not the case for the 7.0 aosp roms. From what I've read there's been people running those on the bpa1 bootloader.
kevintm78 said:
No, unfortunately there currently isn't an easier process than the one that is outlined in this thread. I had some different intentions with this firmware when I was putting it together and some personal stuff came up so I just posted it as is but you'll need to update your bootloader or you'll have wifi issues with the 6.0 roms.
It's my understanding, though I haven't tested it personally, that's not the case for the 7.0 aosp roms. From what I've read there's been people running those on the bpa1 bootloader.
Click to expand...
Click to collapse
So can you tell me if this is where I would start first, since I am on Baseband version BPA1 with root and Unlocked BL i copied the following below from the instructions from the link you provided.
"Extract and flash N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 via Odin
This will make you on Lollipop with Marshmallow bootchain/firmware/modem, which is rootable."
Sorry for the noob like questions. I've just been away too long and I really don't want to screw this up lol. I do appreciate all your help though.
stajam said:
So can you tell me if this is where I would start first, since I am on Baseband version BPA1 with root and Unlocked BL i copied the following below from the instructions from the link you provided.
"Extract and flash N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 via Odin
This will make you on Lollipop with Marshmallow bootchain/firmware/modem, which is rootable."
Sorry for the noob like questions. I've just been away too long and I really don't want to screw this up lol. I do appreciate all your help though.
Click to expand...
Click to collapse
No problem. Yes if you're already unlocked on bpa1 then just go ahead and Odin the firmware you mentioned (N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5). Once you get that booted up then it's just a matter of repeating the same process as before with the LP bootloader. Keep in mind that you won't have wifi when you flash that firmware so you may want to have a copy of kingroot on your internal sdcard ready to go. Then I usually reference this post here on out. There's a couple threads on this subject but I feel like they have some unnecessary steps involved whereas that post really cuts to the meat of it in my opinion.
@kevintm78 Thanks so much. In your opinion, is there really any difference between LP and MM? I really do appreciate your help.