hello!!!
i need some help.
I bought the phone on ali ch version 1GB
if I sets the other firmware, exp s405 row, the backlight on the phone is not working..
Related
Hi, i have (or i had ) a lenovo k920 (chinese version) i have installed via qfil a modded row rom. After that it won't read sim cards anymore (it show only two red cross). by typing on the dialer *#06# i sow that both IMEI was lost (both value was 0) so i replaced the right ones with a little software found on the net. It still won't read sim cards and i noticed that in "version information" it show Baseband version: unknown.
I have done anything: reinstall modded rom, back to stock rom, try another rom...but nothing changed. Please someone can help me?
ty and sory for my English.
ROW software won't work on chinese version of the phone. The radio is different so it uses different software. Therefore you cannot get SIM signal. Flash CN rom, root and debloat manually. That's what I have found to work so far...
Hello, I bought the k920 (china mobile 4G) new from a chinese friend who bought it for me in china. It came pre-manipulated for the international market with K920_ROW_S226_150429_TWRP_ROW.zip , MODEM_CN1.zip and SuperSU_for_K920.zip still left on the internal storage. I got access to all the network types and only the telephone function doesnt work somehow if LTE is enabled. It seems like the network types are also not able to switch between eachother at loss and gain of signal strength. So I am wondering what methods the chinese guys used to achieve my set-up... Baseband version is DI.3.0. Build number 226 and Android Version 5.1.1. And I checked my bootloader and it seems like its locked, according to the adb output ( fastboot oem device-info)
Thanks in advance... EDIT: and sorry for necro bump.
Hi, so I bought this phone a year ago from china with Unicom firmware. Some time ago I installed the A version which is working well exept the 4G. Now I tried to reinstall the Unicom version but I have the "corrupt" problem. Can someone help me go back on U firmware? Thanks
Hey guys,
I am facing a couple of problems with my new galaxy s5 g900f version,
it was already used when i had bought it and i dont know what did the first owner do with this phone.
1. First problem i encountered was sensors stopped working, proximity sensor, barometer sensor and gesture sensor, i noticed it after flashing flashing original firmware from different region with different modem than it was sold with, i got it with hongkong ZH firmware and reflashed to czech XX firmware, i had to also use pit file for 16GB ETL G900F to be able to flash it, dont know if its the problem, tried different roms like CM and original TW for different regions, different pit files, resetting and calibrating those sensors according to tutorials but still nothing. Can be also hardware damage, i tried just pouring some water over this phone, but everything seems to be working ok, also could be burned due to overheating? I was checking my IMEI and imei.info told me my phone is 32gb but i bought 16GB, on the box it says 16gb, i dont remember if my phone told me its 16gb with this hongkong firmware ... its all really weird.
BTW these sensors above the screen are perfectly clean, no dust so i bet the waterproofing/dustproofing is working ok and its not the problem
2. Second problem is i tried selfie stick with my phone but its not working, not problem in this stick since xperia Z3 and LG G3 are accepting it fine, could be some jack problem but headphones working ok ... this selfie stick is using its button as volume button through aux
Would be really great if someone got any idea, or if you have 16GB G900F version, you could check what IMEI says about your phone, does it show 16GB storage?
Thank you very much and sorry for my english, its not my primary language
PS: forgot to say, the phone is now on latest G900FXXU1BOJ2 rom with ETL csc, system status official, no root, original recovery, efs not corrupted(imei is displaying), serial number is changed somehow but shouldnt be big problem, also tried flashing back hongkong firmware but didnt help with any problem
Sensor test
hi guys.! I am from Greece and my z2 pro start the blue screen problem. I read that this phone works better with Chinese rom and problems like mine were resolved. Now my phone has 3 days which works fine. It runs lollipop android (K920_S271_150907_ROW), it is rooted using DragonVibe a8 kernel (unlocked bootloader) and it has xposed firmware too. My question is: Is it possible to FLASH official Chinese rom to ROW version of device? If yes then will i have to do some changes to make it work to my network? I read something about changing the modem to port the Chinese rom and by dialing *#*#5920#*#* to make it work with global network. :silly:
kostikasdrift said:
hi guys.! I am from Greece and my z2 pro start the blue screen problem. I read that this phone works better with Chinese rom and problems like mine were resolved. Now my phone has 3 days which works fine. It runs lollipop android (K920_S271_150907_ROW), it is rooted using DragonVibe a8 kernel (unlocked bootloader) and it has xposed firmware too. My question is: Is it possible to FLASH official Chinese rom to ROW version of device? If yes then will i have to do some changes to make it work to my network? I read something about changing the modem to port the Chinese rom and by dialing *#*#5920#*#* to make it work with global network. :silly:
Click to expand...
Click to collapse
You have to use proper radio (modem) CN or ROW for device to have network.
hello! i buy a mi band 5 CN version, that I know it's only chinese and english. But it wansn't true.. At my first install it was in my phone language (italian). Some days ago i disconnect and repair the band and it won't be in italian anymore. I think it's cause a firmware upgrade that it made between first start and the disconnection. Is there a way to back to the original firmware? Or to put a firmware that support other language on it?
solved.. i keep that message if someone have the same question: with mi fit version 4.4.0 it works.
michelaangelini said:
hello! i buy a mi band 5 CN version, that I know it's only chinese and english. But it wansn't true.. At my first install it was in my phone language (italian). Some days ago i disconnect and repair the band and it won't be in italian anymore. I think it's cause a firmware upgrade that it made between first start and the disconnection. Is there a way to back to the original firmware? Or to put a firmware that support other language on it?
Click to expand...
Click to collapse
Good you have it fixed...