Related
Hey guys, just got my Tab a few days ago, its unlocked and its working great. I want to root, but my PC wont recognize it (running win7) and it says the USB device has malfunctioned... wth? I searched through some threads about the drivers, and ive tried 4 different ones, restarted my PC, AND my Tab, with no luck. No, USB Debugging is not enabled. (not a noob, just, simply not working)
Any ideas? I would appreciate it
I just got my tab 3hours ago. I got it to work.
Here are what i've done
1.go to control panel and see if samsung usb driver is there. If it is, uninstall it.
2.disable usb debugging on the tab
3.connect the tab to the computer.
Thats wht worked for me. Hope it helps. And yes, samsung has really got to work on the usb thing.
Unzip and run the attached file. Delete any old unused USB device and delete any Android, Samsung or other related device then reinstall Samsung drivers.
NovaFox238 said:
Hey guys, just got my Tab a few days ago, its unlocked and its working great. I want to root, but my PC wont recognize it (running win7) and it says the USB device has malfunctioned... wth? I searched through some threads about the drivers, and ive tried 4 different ones, restarted my PC, AND my Tab, with no luck. No, USB Debugging is not enabled. (not a noob, just, simply not working)
Any ideas? I would appreciate it
Click to expand...
Click to collapse
This helped me: my computer tower has front and back USB ports. Back USB ports are directly embedded in the motherboard, front USB ports are a wire run from the case plugged into the motherboard, but the front USB ports are on a different chip.
When I first tried using the ADB debugger with Android, ADB would not even find my device if I plugged the device into the front USB ports. If I move the cord to the back USB ports, everything works properly. Maybe this is your issue?
Thanks guys, I believe I got it working.
Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?
hello! i was searching through the internet and I can't seem to find a definite answer for this type of problem.
my galaxy s4 can't seem to have a stable connection with my PC. it works
so far what I've done
-plugged it directly to the motherboard usb port
-used samsung original cable
-install all USB drivers (installer, kies)
-uninstall, reinstalled drivers but no avail
-used different cables. ( the original cable doesnt seem to work. whenever i plug my device, it only charges. but there is no notificcation that tells me the phone and PC are connected to something) and then i used a motorola cable and the phone and PC seem to detect each other. but only in one of the motherboard ports.
and also, if ever the PC detects my phone, the "connect/disconnect" loop appears... the "connect/disconnect" loop DISAPPEARS when i plugged the phone to a specific port. BUT, it cant seem to have a stable connection. whenever i transfer a large file, lets say a movie. it copies the file half way then the phone suddenly disconnects then reconnects by itself automatically like nothing happened. I couldn't also flash firmwares cuz whenever odin tries to push the files into my phone, suddenly odin will stop and says "disconnected"..... by the way, my PC's usb ports are OK. it can detect and transfer large files from my brother's optimus G and my sister's motorola droid with no problem. I have used this PC for flashing my previous phones with no problem (SGS2, SGS3, SGS1, Gnex, NOTE2, SGmini, china tablets). Yes i do change phone frequently.
can someone please enlighten me on this..and oh! by the way, I tried flashing and transferring files from my gf's laptop and there seem to be no problem at all... I even used the original samsung cable which doesn't work on my PC at home. I would really like to flash my s4 with the latest 4.3 jellybean, and my gf is back in her home town for the sem break so I can't use her laptop for now cuz she has brought it with her..
I would really any comments and insights will be highly appreciated. thank you!
Mobile INFO
SGS4 GT-I9505 (GLOBE Philippines)
4.2.2 I9505XXUDMH8
3.4.0-adam-1.6+
JDQ39.I9505XXUDMH8
PC INFO
windows 7 ultimate 64bit (latest updates installed)
ga-ep45ud3lr
4gb ram
1.5tb hdd
jarold143 said:
hello! i was searching through the internet and I can't seem to find a definite answer for this type of problem.
my galaxy s4 can't seem to have a stable connection with my PC. it works
so far what I've done
-plugged it directly to the motherboard usb port
-used samsung original cable
-install all USB drivers (installer, kies)
-uninstall, reinstalled drivers but no avail
-used different cables. ( the original cable doesnt seem to work. whenever i plug my device, it only charges. but there is no notificcation that tells me the phone and PC are connected to something) and then i used a motorola cable and the phone and PC seem to detect each other. but only in one of the motherboard ports.
and also, if ever the PC detects my phone, the "connect/disconnect" loop appears... the "connect/disconnect" loop DISAPPEARS when i plugged the phone to a specific port. BUT, it cant seem to have a stable connection. whenever i transfer a large file, lets say a movie. it copies the file half way then the phone suddenly disconnects then reconnects by itself automatically like nothing happened. I couldn't also flash firmwares cuz whenever odin tries to push the files into my phone, suddenly odin will stop and says "disconnected"..... by the way, my PC's usb ports are OK. it can detect and transfer large files from my brother's optimus G and my sister's motorola droid with no problem. I have used this PC for flashing my previous phones with no problem (SGS2, SGS3, SGS1, Gnex, NOTE2, SGmini, china tablets). Yes i do change phone frequently.
can someone please enlighten me on this..and oh! by the way, I tried flashing and transferring files from my gf's laptop and there seem to be no problem at all... I even used the original samsung cable which doesn't work on my PC at home. I would really like to flash my s4 with the latest 4.3 jellybean, and my gf is back in her home town for the sem break so I can't use her laptop for now cuz she has brought it with her..
I would really any comments and insights will be highly appreciated. thank you!
Mobile INFO
SGS4 GT-I9505 (GLOBE Philippines)
4.2.2 I9505XXUDMH8
3.4.0-adam-1.6+
JDQ39.I9505XXUDMH8
PC INFO
windows 7 ultimate 64bit (latest updates installed)
ga-ep45ud3lr
4gb ram
1.5tb hdd
Click to expand...
Click to collapse
Your phone has a defective usb port, replace it if it has warranty
R1V4L said:
Your phone has a defective usb port, replace it if it has warranty
Click to expand...
Click to collapse
not really. because it works with my gf's laptop no problem. but thanks for your reply.,
please help
The hint's in your 2nd last post. There's obviously something PC-side going on; your PC - probably with the USB ports, if it works on your GF's PC. Think about it, that's logic. If it was phone-side, it wouldn't work with any PC.
Fix
First connect ur phone to the pc whit the original white cable
them in ur S4 prees the notification of the usb is connected
Enjoy
If u just connect the phone it will only charge. U have to touch the notification.
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!
Hi guys,
Im having a hard time. Hope u guys can help me.
I wanted to start from scratch so i wiped everything, inclusive internal storage within twrp .
So far no problem, but when i tried to connect my OP5 to PC my PC doesnt recognize it. I guess its something with my pc.
Why doesnt my pc recognize my OP5? I cannot do anything right now.
In device manager i cannot find my op5.
Praying for help
Langenl said:
Hi guys,
Im having a hard time. Hope u guys can help me.
I wanted to start from scratch so i wiped everything, inclusive internal storage within twrp .
So far no problem, but when i tried to connect my OP5 to PC my PC doesnt recognize it. I guess its something with my pc.
Why doesnt my pc recognize my OP5? I cannot do anything right now.
In device manager i cannot find my op5.
Praying for help
Click to expand...
Click to collapse
Have a look at here https://forum.xda-developers.com/oneplus-5/help/fastboot-wont-recognize-device-t3866942
strongst said:
Have a look at here https://forum.xda-developers.com/oneplus-5/help/fastboot-wont-recognize-device-t3866942
Click to expand...
Click to collapse
The drivers are installed. When i plug my OP5 in the PC i dont hear or see anything.
The problem is i cannot go into the OS because i have no OS to change USB debugging mode.
Also tried different usb type c cable's
adb doesnt recognize
fastboot doesnt recognize
pc doesnt recognize
Langenl said:
The drivers are installed. When i plug my OP5 in the PC i dont hear or see anything.
The problem is i cannot go into the OS because i have no OS to change USB debugging mode.
Also tried different usb type c cable's
Click to expand...
Click to collapse
You should try to go to fastboot and connect it since it loads low level drivers. Have you read the linked post and tried the steps?
strongst said:
You should try to go to fastboot and connect it since it loads low level drivers. Have you read the linked post and tried the steps?
Click to expand...
Click to collapse
I've editted my response. fastboot and adb doesnt recognize aswell.
Langenl said:
I've editted my response. fastboot and adb doesnt recognize aswell.
Click to expand...
Click to collapse
Is it possible that my connector is broken? Phone is charging though….
I'm really desperate atm ;(
Langenl said:
Is it possible that my connector is broken? Phone is charging though….
I'm really desperate atm ;(
Click to expand...
Click to collapse
Sure, that's possible, you can try to mount an usb otg stick or similar otg within twrp.
strongst said:
Sure, that's possible, you can try to mount an usb otg stick or similar otg within twrp.
Click to expand...
Click to collapse
Really hope thats not the case.
I simply cant check OTG within Twrp->mount when connected to pc. Aint got another OTG device. I hope there is some other way i can fix my problem because i dont want to spend money on repairing my connector. Thanks for your effort!
Langenl said:
Really hope thats not the case.
I simply cant check OTG within Twrp->mount when connected to pc. Aint got another OTG device. I hope there is some other way i can fix my problem because i dont want to spend money on repairing my connector. Thanks for your effort!
Click to expand...
Click to collapse
OTG won't work if connected to a PC, only storage and controller devices, no clients. you need a USB stick or similar, please do some research about usb OTG if it's not clear
strongst said:
OTG won't work if connected to a PC, only storage and controller devices, no clients. you need a USB stick or similar, please do some research about usb OTG if it's not clear
Click to expand...
Click to collapse
Sorry misunderstanding. Anyways...i just borrowed a USB stick wich support otg but still the same problem. cant select otg.
Langenl said:
Sorry misunderstanding. Anyways...i just borrowed a USB stick wich support otg but still the same problem. cant select otg.
Click to expand...
Click to collapse
If you have a chance to simply try it on another PC, do it. Otherwise Firewall, drivers etc should be your next focus.
Langenl said:
Sorry misunderstanding. Anyways...i just borrowed a USB stick wich support otg but still the same problem. cant select otg.
Click to expand...
Click to collapse
Pushed the USB stick a litthe further and it works. My connector isnt the best anymore but im glad it works. Massive thank you!
Langenl said:
Pushed the USB stick a litthe further and it works. My connector isnt the best anymore but im glad it works. Massive thank you!
Click to expand...
Click to collapse
Glad you got it working now! Maybe you can edit the tread title and add [SOLVED] at the beginning to help others solve their issues
I am having the same problem: no mtp, no adb, no fastboot, no otg
The phone charges with dash without any problems. I already tried 3 different computers (win 10 and Linux mint). Cant think of anything else than a Hardware issue of my USB Port.
My biggest problem is not getting adb, so i can't install twrp at the moment.
Are there any recommendations for me?
derschnelle said:
I am having the same problem: no mtp, no adb, no fastboot, no otg
The phone charges with dash without any problems. I already tried 3 different computers (win 10 and Linux mint). Cant think of anything else than a Hardware issue of my USB Port.
My biggest problem is not getting adb, so i can't install twrp at the moment.
Are there any recommendations for me?
Click to expand...
Click to collapse
I hope you read the thread already?
strongst said:
I hope you read the thread already?
Click to expand...
Click to collapse
Yes I did and the difference between OP and me is the non functional OTG.
I just thought you guys might have another ace up your sleeves.
derschnelle said:
Yes I did and the difference between OP and me is the non functional OTG.
I just thought you guys might have another ace up your sleeves.
Click to expand...
Click to collapse
You need a working USB port,if that won't be fixed, nothing can be done...
strongst said:
You need a working USB port,if that won't be fixed, nothing can be done...
Click to expand...
Click to collapse
I'm not really sure, whether my port is broken or not. Shortly after I posted here, I found out, that I missed the Standard USB-Protocol-Setting in developer options (it was checked as charge). So I changed it and voila, USB worked!
But then I tried to install twrp (which was successful at first, but seems to be overwritten again by stock recovery) and now I can't get my device to connect again. I tried to disconnect, connect with other PCs, change the usb-debugging and standard usb-protocoll, connect in fastboot-mode, nothing works.
derschnelle said:
I'm not really sure, whether my port is broken or not. Shortly after I posted here, I found out, that I missed the Standard USB-Protocol-Setting in developer options (it was checked as charge). So I changed it and voila, USB worked!
But then I tried to install twrp (which was successful at first, but seems to be overwritten again by stock recovery) and now I can't get my device to connect again. I tried to disconnect, connect with other PCs, change the usb-debugging and standard usb-protocoll, connect in fastboot-mode, nothing works.
Click to expand...
Click to collapse
It's me again, I solved my problem!
When I tried to connect yesterday I noticed that my phone always charged and then immediately stopped charging again. It was charged to ~80% and didn't go any further. So I thought maybe the battery calibration is faulty, which can happen when you never fully charge. So I emptied the battery, charged it while phone off and tadaaa everything works.
It seems my phone interrupted the usb connection because it tried to charge my phone over 80% and the controller stopped it.
derschnelle said:
It's me again, I solved my problem!
When I tried to connect yesterday I noticed that my phone always charged and then immediately stopped charging again. It was charged to ~80% and didn't go any further. So I thought maybe the battery calibration is faulty, which can happen when you never fully charge. So I emptied the battery, charged it while phone off and tadaaa everything works.
It seems my phone interrupted the usb connection because it tried to charge my phone over 80% and the controller stopped it.
Click to expand...
Click to collapse
Very interesting but it might be possible. Thanks for posting the solution