Hi,
I had to use macgyver battery hack to bring my defy to live.
Everything is working except defy only switches on in emergency calls mode.
There is no service from carrier.
Tried base band switch app
MFUNZ_DEFY.BasebandSwitcherV4.1.apk
but it says
unable to detect your baseband configuration, it's possibly damaged. reset to default?
Tried rename system/etc/motorola/bp_nvm_default and even move the folder.
But reset to default is not possible.
I have tried eclair (full SBF), blurlessginger & some other fixed froyos, cm 7.1 & cm 7.2.
Without any success.
Can anyone suggest a way forward or the phone is to be discarded.
Regards
Are you using baseband 4.0?..uhmm maybe your cellphone have negative band
Desde cualquier lugar de mi ciudad con el 4x4 de motorola
Defy only emergency calls--------------Help
FINEEEEE said:
Are you using baseband 4.0?..uhmm maybe your cellphone have negative band
Desde cualquier lugar de mi ciudad con el 4x4 de motorola
Click to expand...
Click to collapse
I use baseband switcher 4.1.
Can you please explain the negative band
avionics49er said:
I use baseband switcher 4.1.
Can you please explain the negative band
Click to expand...
Click to collapse
Try flashing the full sbf again
Well... if i destroy my S4 for any reason, i would like to have the original rom... the only think i remember about that rom is the name... i9500UBUAMDK, seeing the sammobile website, already exist about 6 roms called I9500UBUAMDK (all LATAM)... In Chile does not sell i9500 model, i buy it at www.mercadolibre.cl
How can i know what rom use in my phone?
THANKS!!
If you are asking about the version that is on your (new) phone. Go to settings / more / about device
You will also see your model number. Just filter your model number and you can download the appropriate official firmware.
Sent from my GT-I9505
GR13V3R said:
If you are asking about the version that is on your (new) phone. Go to settings / more / about device
You will also see your model number. Just filter your model number and you can download the appropriate official firmware.
Sent from my GT-I9505
Click to expand...
Click to collapse
I already have WanamLite... thats the reason because i dont know my original rom xD
Thanks anyway
wolfraim said:
I already have WanamLite... thats the reason because i dont know my original rom xD
Thanks anyway
Click to expand...
Click to collapse
viejo te envié un mail a [email protected]
yo tambien tengo un i9500
mi mail es [email protected]
pa que trabajemos juntos, tengo un problema parecido al tuyo.
Slds.
HypnotiQ said:
viejo te envié un mail a [email protected]
yo tambien tengo un i9500
mi mail es [email protected]
pa que trabajemos juntos, tengo un problema parecido al tuyo.
Slds.
Click to expand...
Click to collapse
Please post the english translation.
wolfraim said:
Well... if i destroy my S4 for any reason, i would like to have the original rom... the only think i remember about that rom is the name... i9500UBUAMDK, seeing the sammobile website, already exist about 6 roms called I9500UBUAMDK (all LATAM)... In Chile does not sell i9500 model, i buy it at www.mercadolibre.cl
How can i know what rom use in my phone?
THANKS!!
Click to expand...
Click to collapse
If your S4 is factory unlocked, you can flash any Stock ROMs that are not carrier locked from sammobile.com, here's the tutorial http://forum.xda-developers.com/showthread.php?t=2265477&page=4
Well my problem is the following:
i bought a s5 g900a, im from argentina, and i bought it second hand to a friend of mine, who bought it in usa (the frequencies of this phone are the same we use in argentina, so they're ok), the problem is i cannot get the mobile network to work, the sim works perfectly in other phones but not in this, i wonder what could i do, i tried *#*#4636#*#* change to lte, etc but wont work, the other problem is i cannot root the phone, i tried kingroot, kingoroot, towelroot, etc and none works to me, the android version is 4.4.2 plz give me a hand!!
Hey man just connect it to samsung kies and then just update it to 5.0 which is the latest version for the s5 in south America,
Other thing is just flash a custom recovery ans them proceed to install cm13 i get 2 days with full usage on that rom.
Si deseas mandame un privado y te ayudo en español.
Saludos.
peritajejeje said:
Hey man just connect it to samsung kies and then just update it to 5.0 which is the latest version for the s5 in south America,
Other thing is just flash a custom recovery ans them proceed to install cm13 i get 2 days with full usage on that rom.
Si deseas mandame un privado y te ayudo en español.
Saludos.
Click to expand...
Click to collapse
The problem is i have the at&t version, in sammobile theres just the kitkat rom, i wonder what can i do to root the phone and upgrade it
dvdmcwilliams said:
The problem is i have the at&t version, in sammobile theres just the kitkat rom, i wonder what can i do to root the phone and upgrade it
Click to expand...
Click to collapse
http://forum.xda-developers.com/att-galaxy-s5/general#subForums
There is a forum dedicated for At&t head there and do the bootloader thing then install a rooted rom , didnt knew rooting or changing a AT&T S5 was soooo complicated anyways there is the link.
Cheers.
Hi.
Sorry for my bad English, it's not my native language.
Ask for their help to know more about the 3G and 4G connection bands.
Buy a lenovo z6 pro, the 8gb / 128gb version, bring the bands B1, B3, B5 and B7. In my country (Mexico) the operators use the B2 and B4, but in some regions they are testing the B7. I decided to buy it because where I live my Xiaomi connects to the B7 but now that I have the Lenovo it seems as if it could only connect to the 3G. An operator (At & t) also uses the B5 for 4G but does not connect to it, only 3G.
There have also been many problems with the roms of the Lenovo team since they sell a version as global but it is not, it is only a hybrid version with deleted Chinese applications. Therefore it follows that there is no global version. I don't know if these problems have to do with connections.
Annex two images where I show the Xiaomi that connects to the B7 and what an application of the Lenovo tells me.
cesarkb8 said:
Hi.
Sorry for my bad English, it's not my native language.
Ask for their help to know more about the 3G and 4G connection bands.
Buy a lenovo z6 pro, the 8gb / 128gb version, bring the bands B1, B3, B5 and B7. In my country (Mexico) the operators use the B2 and B4, but in some regions they are testing the B7. I decided to buy it because where I live my Xiaomi connects to the B7 but now that I have the Lenovo it seems as if it could only connect to the 3G. An operator (At & t) also uses the B5 for 4G but does not connect to it, only 3G.
There have also been many problems with the roms of the Lenovo team since they sell a version as global but it is not, it is only a hybrid version with deleted Chinese applications. Therefore it follows that there is no global version. I don't know if these problems have to do with connections.
Annex two images where I show the Xiaomi that connects to the B7 and what an application of the Lenovo tells me.
Click to expand...
Click to collapse
Para que te agarre el 4g, si es que vives en cdmx es usarlo en movistar, yo me cambie de telcel a movi (porque ya me salia muy caro estar en telcel) y el celular agarra 4g sin problemas pero no 4.5g, eso si no se porque supongo que es problema de las bandas, saludos
kakanic2086 said:
Para que te agarre el 4g, si es que vives en cdmx es usarlo en movistar, yo me cambie de telcel a movi (porque ya me salia muy caro estar en telcel) y el celular agarra 4g sin problemas pero no 4.5g, eso si no se porque supongo que es problema de las bandas, saludos
Click to expand...
Click to collapse
Hola, hazme una favor. puedes instalar la aplicacion LTE Discovery y me dices a que banda se conecta al 4G de favor.
https://play.google.com/store/apps/details?id=net.simplyadvanced.ltediscovery
Saludos y gracias por responder.
My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .
Hello
I have very similar problem in fact the same I believe
When I start or recieve a call my current 4G full signal strength connection drops immediately 3G and the signal strenght become very poor. On the other hand while surfing on the internet there is no quality drop.
I have run a diagnistic test to my sim card and I get an error. I hope you have any information about it.
I am currently using 11.0.325 ST Global ROW. But on official stock rom the situation was the same.
It seem you have the Volte option not activated.
Check in your setting or maybe not activated by your operator ( turkcell by your mcc)
But i cant read turkey , i let you check that.
It's not a band issu, because you have 4g before call.
mburaky06 said:
Hello
I have very similar problem in fact the same I believe
When I start or recieve a call my current 4G full signal strength connection drops immediately 3G and the signal strenght become very poor. On the other hand while surfing on the internet there is no quality drop.
I have run a diagnistic test to my sim card and I get an error. I hope you have any information about it.
I am currently using 11.0.325 ST Global ROW. But on official stock rom the situation was the same.
Click to expand...
Click to collapse
I think that is not a problem. In the Xiaomi I had before that happened. had 4G when answering calls changed to 3g and at the end returned to 4g.
achicasar1069 said:
My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .
Click to expand...
Click to collapse
Acaba de salir una actualización de la ROW. Buscala, se instala por medio de Fastboot igual que la ZaZz pero es la ROW.
cesarkb8 said:
I think that is not a problem. In the Xiaomi I had before that happened. had 4G when answering calls changed to 3g and at the end returned to 4g.
Click to expand...
Click to collapse
But the signal strength also drops significantly and other side cant hear my vioce
mburaky06 said:
But the signal strength also drops significantly and other side cant hear my vioce
Click to expand...
Click to collapse
have you tried with Chinese ROMs? or with this menu * # * # 4636 # * # * on dial. It gives you to choose the connection priority and some of the calls.
mburaky06 said:
But the signal strength also drops significantly and other side cant hear my vioce
Click to expand...
Click to collapse
Me also facing the same issue... Airtel India
mnrajeesh87 said:
Me also facing the same issue... Airtel India
Click to expand...
Click to collapse
Mine Turkey
I've got the same problem in Russia. If the 4g is strong enough, then, the incoming call is OK. If the 4g signal is poor, or there is 3G or 2G signal, then when I answer phone the other side does not hear me, because my phone's microphone doesn't work. The problem is in the proximity sensor. To solve the problem you need to use to install Truephone app, and switch off the pre-installed google phone. Truephone does not switch off the screen. Another solution is to install 575 CN firmware.
Hi. Do you have the VoLTE function active? You can see it with the menu on call (*#*#4636#*#*). What ROM are they using?
I am from Mexico and in the network provider I am only receiving H+ (It is 3G but faster). My problem is about the bands. Because if my previous cell phone connected to the
Band 7 in 4G, this does not.
And I haven't had the problems they mention. If I have little signal, the call fails me; but if I am with 3 or more signal intent stripes, it works perfectly. I have the ROM 11.0.325 ST
cesarkb8 said:
Hi. Do you have the VoLTE function active? You can see it with the menu on call (*#*#4636#*#*). What ROM are they using?
I am from Mexico and in the network provider I am only receiving H+ (It is 3G but faster). My problem is about the bands. Because if my previous cell phone connected to the
Band 7 in 4G, this does not.
And I haven't had the problems they mention. If I have little signal, the call fails me; but if I am with 3 or more signal intent stripes, it works perfectly. I have the ROM 11.0.325 ST
Click to expand...
Click to collapse
Try to use Signal Network Guru app. There is an option to activate\deactuvate the bands manually.
4g problems and sound
I also have problems with 4g connection (it always stays at two bars of H+, Vodafone network,EU), can anyone post a tutorial how to solve this ?!? Also the person I'm talking to WITHOUT headphones hears me really bad.
Device info:
Lenovo z6 pro
Miui 11.0.325
Unlocked, twrp recovery and magisk.
Change the global one it's useless.
Unlock bootloader and flash Zazza Rom Base on China 1.1.080. you'll no notifications problem.
Inviato dal mio Lenovo L78051 utilizzando Tapatalk
Hello everyone.
I bought a chip that uses band 2 for 4G and I bring 2 chips. Since I have one of them when it warms up, an x begins to appear in the signal and does not recover until I get into airplane mode or restart it. But the strangest thing is that when I play and the cell warms up, they both start to fail, as well as Wi-Fi, they turn off and turn on, until it appears to me in the bar as if I didn't have a SIM and the Wi-Fi also turns off. when I had a chip that never happened to me.
Do you have any idea why it is? And why when the cell phone heats up does that happen or will it be the other SIM Does anyone else happen to this?
Cyb180 said:
I've got the same problem in Russia. If the 4g is strong enough, then, the incoming call is OK. If the 4g signal is poor, or there is 3G or 2G signal, then when I answer phone the other side does not hear me, because my phone's microphone doesn't work. The problem is in the proximity sensor. To solve the problem you need to use to install Truephone app, and switch off the pre-installed google phone. Truephone does not switch off the screen. Another solution is to install 575 CN firmware.
Click to expand...
Click to collapse
I applied your solution it helped thank you. But it is not fully solved. I tried all roms ( official, Zaza version, global version) but the problem always exist. Can we fix this sensor or the problem is about the antenna?
mburaky06 said:
I applied your solution it helped thank you. But it is not fully solved. I tried all roms ( official, Zaza version, global version) but the problem always exist. Can we fix this sensor or the problem is about the antenna?
Click to expand...
Click to collapse
Yes, we (4PDA Russian community) are close to solve it. We found that the problem is in EFS partition. That partition contains the info about all kinds of phone's networks and IMEI also, and we have an opinion that only 575 CN firmware is totally ok for the sensors and antennas. So it is a great idea, but it has not been tested yet. For the first you need to install 575 CN via QFIL, 2nd - to install TWRP, 3rd - to backup the EFS partition via TWRP. To save that backup on SD-card. Then install the global firmware (the latest 375, for example)? TWRP again to restore the EFS from backup. It has not been tested yet.
Updated yesterday my phone (S20 5G unlocked) to A12/OneUI 4 beta and fingerprint and face unlock no longer work. Deleting and re-adding fingerprints or face does not do anything. I'm on US unlocked, with Snapdragon 865.
While I don't have the answer for you, were you able to capture the S20 5G snapdragon link to download the beta?
Everything working fine with me.
Dónde descargar la versión beta o usó el banner para miembros de Samsung El hilo no está disponible Descargar Mi modelo es SM-G981U1
Translated by GT: Where to download the beta version or used the Samsung member banner Thread is not available Download My model is SM-G981U1
No disponible SM-G981U1
xela19115 said:
Updated yesterday my phone (S20 5G unlocked) to A12/OneUI 4 beta and fingerprint and face unlock no longer work. Deleting and re-adding fingerprints or face does not do anything. I'm on US unlocked, with Snapdragon 865.
Click to expand...
Click to collapse
currently have this issue as well. Not working even after downgrading fw and factory resetting. Gonna try one last resort. Did you by chance ever fix it?
scepz said:
currently have this issue as well. Not working even after downgrading fw and factory resetting. Gonna try one last resort. Did you by chance ever fix it?
Click to expand...
Click to collapse
Upgrade to the 2nd beta. The issue is with Google Family Link app.