after updation to CM12, yesterday i observe that my mobile is not turned on. when i press the power button the lights at the bottom home and return buttons turned on but the screen is not turned on. I tried to charging the mobile. it gets charged and when i press power along with the volume buttons mobile gets restarted screen is also activated with the display of Cyanogen. but again same problem. i tried to dial from another mobile to yureka. I got the call but screen is not turned on. so that, i was unable to attend a lot of calls. i think its not a hard ware problem. might be some software problem. how do i fix this one........
tried factory resetting the device??
turn off your phone and press both volume keys and power button until you see cyanogenmod recovery.
wipe data/factory reset from there
wipe cache too
**Note: - This will erase all data from your phone..**
Related
Hello there I have an tmo g1 none rooted and every app except the browers when I try to run it says force close I can't call or anything also the touchscreen is unresponsive how do I fix this factory reset install new rom please help
First of all...What have you tried? Have you tried a wipe?
no im nervous 2 do it because of the touch the android screen will come up and the touch screen is unresponsive but mostly every app i open it make it force close it out
If your screen is not responding to touch you can still Factory Restet your phone using Hardware buttons.
Just follow these steps:
turn off your phone[just do it any way-remove battery & reinsert or use power button ] and restart.
now
1-Press and hold the Home button and the Power button at the same time.
2-Keep holding Home and Power together for 20-25 seconds, even if the "Startup" screen appears.
3-Release the keys when you see a black screen with a warning sign.
4-At the warning sign screen, press the Home and Power buttons again simultaneously, and then let them go.
5-Use the trackball to scroll to wipe data/factory reset.
6-press the trackball in on wipe data/factory reset.
7-When the screen displays "Data wipe complete", roll the trackball to reboot system now.
8-Press the trackball in on reboot system now.
when your phone restarts it will be 'clean' .
I activated art on my S5 and it restarted. When it was restarting it was saying optimizing apps. After that the phone turned off and now it doesnt even turn on. If i press the power button the phone will vibrate but doesn't turn on. I even tried a hard reset by holding the power button, up volume, and home button but nothing is working. Any body have any suggestions on how i can get it working again, at this point i dont even care about the data and apps on my phone I just want it working. Any help is appreciated.
navpal said:
I activated art on my S5 and it restarted. When it was restarting it was saying optimizing apps. After that the phone turned off and now it doesnt even turn on. If i press the power button the phone will vibrate but doesn't turn on. I even tried a hard reset by holding the power button, up volume, and home button but nothing is working. Any body have any suggestions on how i can get it working again, at this point i dont even care about the data and apps on my phone I just want it working. Any help is appreciated.
Click to expand...
Click to collapse
Are you able to boot into the Download Mode? (Power + Home + Volume Down)
If so, try to reflash the stock firmware.
If I press the power button on my G2, the screen comes on, and goes off after about 1 second. During this one second, I can unlock the screen and do anything but the screen ultimately goes off. the only way to use my phone is to turn the screen on by plugging in the charger, or by pressing power button volume down at the same time. this switches the screen on normally. Tap to sleep works perfectly but tap to wake isn't working. I've tried factory reset. I've cleaned cache partition. I'm all stock no root. Any help would be greatly appreciated! Thanks!
Hello, some days ago my phone suddenly got black screen, the buttons light ON, it also vibrates, if i double press the home button it enter the camera because the shutter souns, led notification also lights, seems like everything work but the screen keeps black..
I tried sme of the method around the web:
Power button + volume down (FAILED)
Power button + volume up (FAILED)
Power button + volume down + Home (FAILED)
Power button + volume up + Home (FAILED)
Delete cache (FAILED)
Factory Reset (I THINK IT FAILED, IT WAS HARD TO ENTER TO RECOVERY AND SELECT FACTORY RESET SINCE THE SCREEN DOESNT TURN ON)
Anything else i could do to get my phone back working..
I cannot take it to customer center because i bought in USA and Im from Mexico
Thanks in advanced guys
renehd2 said:
Hello, some days ago my phone suddenly got black screen, the buttons light ON, it also vibrates, if i double press the home button it enter the camera because the shutter souns, led notification also lights, seems like everything work but the screen keeps black..
I tried sme of the method around the web:
Power button + volume down (FAILED)
Power button + volume up (FAILED)
Power button + volume down + Home (FAILED)
Power button + volume up + Home (FAILED)
Delete cache (FAILED)
Factory Reset (I THINK IT FAILED, IT WAS HARD TO ENTER TO RECOVERY AND SELECT FACTORY RESET SINCE THE SCREEN DOESNT TURN ON)
Anything else i could do to get my phone back working..
I cannot take it to customer center because i bought in USA and Im from Mexico
Thanks in advanced guys
Click to expand...
Click to collapse
Fast fast try to return it before Trump wins . He will build the wall you know... Jk...
For my opinion LCD has to be changed. Due drop or in your pocked from high pressure i think its gone ...
Since as you said phone is working you can take pictures or receive calls but screen is always black.
Can you see its black color or screen isn't turning at all.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Mine started with green stripes allover the screen and few days later - "black screen"
Samsung change the whole unit.
But if lcd doesnt work so, it wont recognize when i press the screen, can it?
Anyone with this problem
cavags5 said:
Anyone with this problem
Click to expand...
Click to collapse
It's hardware issue.
https://forum.xda-developers.com/showpost.php?p=70499471&postcount=73
S7 Edge BSoD Extra Info. needed
Hi,
Phone: I have a Samsung Galaxy S7 Edge SM-G935FD
I was using my phone to send a txt (and at the same time I think I was receiving a text or call because the menu and back touch buttons were lit up) and all of a sudden the phone crashed as I tried to finish my text but the touch wasnt responding, then the backlight turned of like it does if the phone is not being used. But the strange thing was that the menu and back touch buttons stayed lit up (Solid).
I tried many methods to restart the phone:
Power button + volume down (FAILED)
Power button + volume up (FAILED)
Power button + volume down + Home (FAILED)
Power button + volume up + Home (FAILED)
So I thought I'll let the battery die and then recharge and hopefully the phone would automatically restart like normal, however the phone does not show sign of charging now.
So I tried to connect to the PC but it wasn't being recognized however when I press and hold the power button a sound of detecting a device sounds and then when I take my finger off the sound of detaching occurs. But I couldn't see anything happening, until I went into device manager, under "Other Devices" , "Exynos8890" appears which I know is the chipset.
This is as much as I know of the problem. How do I solve thins problem without trying to factory reset the phone and lose all my data?
PS: I didn't backup my photos (My baby children only copies) or Notes in NotePad, which has some very important info.
1. My yu yureka mobile is working fine when I switch on.
2. After some time the screen is turned in to black screen if I am not using.
3. The phone is not waking up back with power button or on screen swiping.
4. I have to switch off and switch on the mobile by holding power button hard to use the mobile.
5. please solve/suggest for this issue ( I tried factory reset also which not solved the problem).