[Q] CSC for G900F Problem - Galaxy S 5 Q&A, Help & Troubleshooting

Hi,
I am using International version of Samsung Galaxy S5 G900F, I bought it with the firmware belonging to KST(Saudia Arabia). As I was in need of 4G I flashed it with official firmware from Poland (XEO) at that time only country having Lollipop update. After some time I rooted my mobile. and flashed Xtrestolite rom. Now I reverted back to stock official firmware from England(BTU). My CSC when seen in Kies is from XEO(Poland). While I installed Firmware from England. Now again I rooted my mobile again and installed Xtrestolite rom to change CSC manually through Phoneinfo Samsung. But it gives error. It shows in CSC section
Original CSC XEO
Firmware CSC BTU
Active CSC XEO/BTU
CSC Country UK & IRE
Prouct name G900FZDAXEO
How can I change original CSC according to the official firmware installed i.e. BTU(UK) to get official updated from Kies?

Try this
http://forums.androidcentral.com/sa...5-guide-how-change-csc-samsung-galaxy-s5.html

*Detection* said:
Try this
http://forums.androidcentral.com/sa...5-guide-how-change-csc-samsung-galaxy-s5.html
Click to expand...
Click to collapse
No Luck. Same
After flashing firmware going to recovery android icon comes and some installation starts (A blue bar below it) it goes almost half in the way and phone restarts again. If I go to recovery there comes.
Manual mode
Appling multi-csc
Applied the CSC-code: XEO
Successfully applied multi-CSC

Related

[Q][I9505] CSC changed itself

hi guys. anyone experienced the same. here's what happened:
i was using i9505 glb kitkat (csc=glb=globe philippines). i flashed clockworkmod, then install carbon rom.
last month, i re-flash my original glb kitkat. then went to recovery. i noticed that the csc changed to sin (singapore singtel) without doing anything.
now my problem is what rom should i use next time i update to lollipop: glb or sin.
pls help and many thanks.
Is your phone SIM unlocked? If it is, it doesn't matter which CSC you use. Otherwise, stay with CSC GLB.
No. I used regionlockaway to make it sim unlocked.
Then as mentioned, the CSC doesn't matter. Case in point is my I9505. Originally an O2 phone, when I purchased it the S4 was already unlocked and had Ukranian firmware on it. When I installed the Black Edition UK firmware (CSC BTU) after repairing my S4's SIM tray and again removing the SIM lock, I ended up with CSC AUT (Switzerland) instead.
On an open firmware such as CSC BTU, there are actually multiple CSCs within the firmware, and all the CSC does is customize the firmware to the needs of a specific region. In the case of AUT, the firmware installed three Swiss-specific apps that could be easily removed. BTU and the other CSCs essentially do the same thing, and I am guessing this is without modifying the firmware itself.
Ok. Thanks guys. I'll still use glb firmware once lollipop is released. I had once semi-bricked my s4 (got repaired at samsung center) so i'm kinda nervous this time.

What is the correct firmware to download

Hi. I have a Galaxy Note 4 N910C that is bought from U.A.E (United Arab Emirates) it was given to me but was rooted. So I cannot update it via OTA. So decided to just flash a rom manually via odin. I'm quite new to flashing but I know how to do it. So I went to Sammobile for firmwares. Before anything else. I am in
Android 4.4.4 Kitkat
Baseband : N910CXXU1ANL2
Build : KTU84P.N910CXXU1ANK5
In my box there's : N910CZWEXSG
So in my box, the last three is XSG which is the country code for UAE so I went to filter the roms via country code and I am confuse in the available roms for download.
There is a PDA which is N910CXXU1ANK5. So I assume that is the correct rom? But there's this CSC? What is it? And in my baseband N910CXXU1ANL2 what does it mean?
For the available download with PDA N910CXXU1ANK5, it's CSC is N910COJV1ANK5 . Is that the correct rom for me?

Nougat Firmware with MM CSC?

Hi...as the title says: Is it possible?
So to flash BTU and after it the CSC for my provider (it's from a MM Firmware)?
Tried the search function but couldn't find a statement.
it works, mine has xeu csc and I have flashed btu without a problem
Yeah...I'm also on BTU now. But I wanted to know if I could flash a 6.0.1 CSC now without problems.
yes, tested by me, downgrade is safe because bootloader binary is the same
Thanks!
@Pet1981 hey there? did you try to flash the marshmallow CSC? I'm thinking of doing so since Samsung Pay has been rolled out in my home country but I'm currently in Switzerland, using the BTU nougat update
Yep! Works without problems
Tried the MM csc for T-Mobile Germany (DTM) in Renovate 7.1.0 (Nougat) and it doesn't work properly, needed to switch back to the german unbranded csc (DBT)

Oreo in France (mixed XEF and BTU)

Hello
I was on the PHN stock firmware (from the "official" topic) .
I made a clean install to change to XEF with the last XEF 7.0 firmware
AP_G935FXXS2DRAA_CL12365438_QB16535167_REV00_user_low_ship_meta.tar
BL_G935FXXS2DRAA_CL12365438_QB16535167_REV00_user_low_ship.tar
CP_G935FXXU2DRA9_CL648265_QB8671796_SIGNED.tar
CSC_OXA_G935FOXA1DQJ3_CL12365438_QB15342654_REV00_user_low_ship.tar
After the install, I get the OREO OTA Update.
AP : G935FXXU2ERD5
CP : G935FXXU2ERD5
CSC : G935FOXA2ERD5
But It seems that I got the UK firmware instead of the XEF one... (for example I have Samsung Pay UK, but It works)
Is It normal ?
Hello, because you flashed CSC that wipe all ... next time, flash HOME_CSC and you will keep your settings
Now you can go and flash your CSC from nougat here (I don't think XEF is already done for Oreo at moment) : http://www.phonandroid.com/forum/av...operateur-sur-le-s7edge-sm-g935f-t177633.html
ric69 said:
Hello, because you flashed CSC that wipe all ... next time, flash HOME_CSC and you will keep your settings
Now you can go and flash your CSC from nougat here (I don't think XEF is already done for Oreo at moment) : http://www.phonandroid.com/forum/av...operateur-sur-le-s7edge-sm-g935f-t177633.html
Click to expand...
Click to collapse
Yes I know, I flashed the CSC, because I wanted to change from PHN to XEF. (To activate Samsung Pay in my country)
But the OTA Update change from XEF to BTU by himself....
yan74s said:
Yes I know, I flashed the CSC, because I wanted to change from PHN to XEF. (To activate Samsung Pay in my country)
But the OTA Update change from XEF to BTU by himself....
Click to expand...
Click to collapse
OTA won't change CSC, it means your CSC was already set to BTU, thats why you received BTU oreo OTA.
Sent from my S7 Edge using XDA Labs

CSC Code Won't Change After Flashing Stock Firmware

Hey guys! So, out of curiosity, I've downloaded and flashed the most recent Oreo from Russia (CSC: SER) thinking that I would like to try out the new Oreo software. After I've tried it, I decided to go back to Nougat by flashing the stock firmware (CSC: XME) I downloaded from sammobile.com. After completing it, someway, somehow, the device is now stuck in the Vietnam CSC (XXV). I've been downloading various of XME firmwares from the past and everytime it finish flashes, it will start up in Vietnamese and I'm stuck again with the Vietnam CSC. Nice that I'm able to get oreo with a Vietnamese CSC, but I don't want to use it because the Samsung Pay works different in Vietnam in comparison to Malaysia. And, I've no idea how flashing a SER and then XME would come out with a XXV CSC is beyond my imagination. Is there anyway for me to return back to my stock CSC without rooting and tripping Knox?
Opening the stock recovery completes the CSC installation, give that a try. It's expected to show "Updating 0-100%".
jereyeap said:
Hey guys! So, out of curiosity, I've downloaded and flashed the most recent Oreo from Russia (CSC: SER) thinking that I would like to try out the new Oreo software. After I've tried it, I decided to go back to Nougat by flashing the stock firmware (CSC: XME) I downloaded from sammobile.com. After completing it, someway, somehow, the device is now stuck in the Vietnam CSC (XXV). I've been downloading various of XME firmwares from the past and everytime it finish flashes, it will start up in Vietnamese and I'm stuck again with the Vietnam CSC. Nice that I'm able to get oreo with a Vietnamese CSC, but I don't want to use it because the Samsung Pay works different in Vietnam in comparison to Malaysia. And, I've no idea how flashing a SER and then XME would come out with a XXV CSC is beyond my imagination. Is there anyway for me to return back to my stock CSC without rooting and tripping Knox?
Click to expand...
Click to collapse
So, I have done some digging around the internet and found this link from the Sammobile forum. I've tried the methods in that forum, and it works!
If any of you have suffered the same problem as me, you could perform troubleshoot using this method. It seems that firmware for XME is actually multi-CSC and includes other CSC such as Vietnam, Thailand, Singapore, Myanmar and etc.. The Vietnam CSC is the default CSC.
So, here you go. This is the link: https://www.sammobile.com/forum/threads/39155-How-to-change-CSC-with-a-combination-file

Categories

Resources