https://mega.co.nz/#!wdgm1aqB!4cIW5hrGaQCBQKBw7_R04bQbkcqKY1E160BEiHoQ7Fw
If for any reason you can't get the OTA through the official methods here's a link, sideload it through the stock recovery on a fully stock system.
Woo! Finally lollipop comes to Chile!
Guys, it's good news here. The 5.1 OTA has been captured by one of the guys on FB. He specially rooted his phone just to capture the OTA for us, so great thanks to him. His name is Saurabh Das.
Here's the link to the final 5.1 OTA from Motorola: http://www.mediafire.com/download/m....36.condor_retaildsds.retaildsdsall.en.03.zip (209MB)
Note: This update file will only work if you are on the second soak test update which has the size of 13MB.
Here are the links to all the soak test updates from Motorola:
Soak 1: http://www.mediafire.com/download/f....32.condor_retaildsds.retaildsdsall.en.03.zip (341MB)
Soak 2: http://www.mediafire.com/download/e....36.condor_retaildsds.retaildsdsall.en.03.zip (13MB)
Soak 3: NOT NEEDED.
How to update:
1. You have to make sure you are on the second soak test update 5.0.2 having system version 22.21.36 from Motorola (13MB).
2. If you are not on system version 22.21.36, then do the following:
Flash stock ROM Kitkat 4.4.4. If you don't have it, download from here: https://mega.co.nz/#!SUZA3AbR!P_qdV24-ZpqSwKhCPjifBcd7en7Y7AkBZpRApb2loHs
Follow this guide to flash 4.4.4 on your Moto E: http://forum.xda-developers.com/moto-e/development/downgrade-5-0-x-to-4-4-4-stock-firmware-t3031073
Once you're on 4.4.4, boot into the system. Now place the Soak 1 file (341MB) in the root of the SD card, go to Settings>About phone>System Updates. Your system will detect the update. Install it.
Now you'll be on system version 22.21.32. Now put the Soak 2 file (13MB) in the root of the SD card, go to Settings>About phone>System Updates. Your system will detect the update. Install it again.
Now you'll finally be on the system version 22.21.36.
3. Now download the 5.1 OTA (209MB) and rename it to:
Code:
Blur_Version.23.21.34.condor_retaildsds.retaildsdsall.en.03
...and place it in the root of the SD card.
4. Go to system->about phone->system updates. Your system will detect the update. Install it. Let it finish. You're done!
Congrats :highfive:
Thanks
This upgrade to xt1021 been tested or xt1022?
What about those who already installed the 7 MB update???
This is for XT1022 only.
For those who updated to 7MB either wait for update from motorola or flash 4.4.4-> 5.0.2 (both 341mb and 13mb) and then apply this 209mb update.
It has been confirmed that the capturer has successfully updated to 5.1 system version 23.21.34.
nilanko said:
This is for XT1022 only.
For those who updated to 7MB either wait for update from motorola or flash 4.4.4-> 5.0.2 (both 341mb and 13mb) and then apply this 209mb update.
It has been confirmed that the capturer has successfully updated to 5.1 system version 23.21.34.
Click to expand...
Click to collapse
You should put the instructions to update a little better. many novices here, I say to avoid bricks, Thank you for bringing the information till here.
I can't understand a thing here... i need to be on KitKat right? it works on debloated ROM without custom recoveyr?
you need to be more specific.
jonaaa said:
I can't understand a thing here... i need to be on KitKat right? it works on debloated ROM without custom recoveyr?
you need to be more specific.
Click to expand...
Click to collapse
You have to be in soak test 5.0.2, you can upgrade to 5.1
Carlos Arriaga said:
You have to be in soak test 5.0.2, you can upgrade to 5.1
Click to expand...
Click to collapse
in 13mb update
Please put clear instructions . whether to flash thru custom recovery or by going thru ota 5.0.2 and put the file of 208mb in internal or extsdcard and check for ota updates ?
YOU NEED TO BE ON UNMODIFIED AND VERY MUCH ORIGINAL STOCK 5.0.2 LOLLIOP UPDATE OF THE SIZE 13MB (SECOND SOAK TEST). THIS MEANS YOU HAVE TO FLASH STOCK 4.4.4, THEN UPDATE IT TO FIRST SOAK TEST (341MB), THEN AGAIN UPDATE IT TO SECOND SOAK TEST (13MB). AT THIS POINT, YOU MIGHT WANT TO CHECK FOR UPDATES VIA ABOUT PHONE->SYSTEM UPDATES, IF YOU GET A NOTIFICATION FOR 5.1, THEN ENJOY OTHERWISE YOU CAN USE THE FILE UPLOADED ON MEDIAFIRE HAVING THE SIZE 209MB AND PUT IN ON THE SD CARD AND CHECK FOR UPDATES MANUALLY LIKE YOU DID BEFORE. IF IT DOESN'T DETECT, THE FILE NAME ACTUALLY NEEDS TO BE MODIFIED TO PROBABLY 23.21.34 WHERE IT SAYS 22....SOMETHING. TRY AFTER THAT. OR ROOT UR PHONE AND PUT THE 209MB FILE IN /CACHE/ WITHOUT RENAMING AND CHECK FOR UPDATES. IF NOTHING WORKS, I'M SORRY, I don't REALLY KNOW WHAT THE FILENAME NEEDS TO BE. BTW, THE CAPTURER successfully UPDATED TO 5.1. WE BOTH STAYED AWAKE THE WHOLE NIGHT FOR THIS PURPOSE AND HE SAYS 5.1 IS REALLY SMOOTH.
SORRY FOR ALL CAPS.
If your phone doesnt detect the update, rename it to .38. It worked for me
Can anyone make a flashable zip of the 5.1 ota?
konankiakshay said:
Can anyone make a flashable zip of the 5.1 ota?
Click to expand...
Click to collapse
Someone who is on 5.1 has to make a system backup on twrp and upload it. Thats the best way for making flashable zip
I think it does not work in TWRP(Custom recovery)
Stayed awake whole night and I'm more confused than ever. Don't know if I should flash KitKat or wait for update for 7 MB version or keep trying renaming it different ways.
vinay001 said:
I think it does not work in TWRP(Custom recovery)
Click to expand...
Click to collapse
Ya. Everybody knows that. I mean after updating they have to install twrp
drvijayanand said:
Ya. Everybody knows that. I mean after updating they have to install twrp
Click to expand...
Click to collapse
yeah tat's a good idea is that possible and make a twrp Backup isn't ...
Clarification
Hi guys, Im saurabh who uploaded the 5.1 ota.
Well, I never used the last 7mb incremental soak test that few people used. Before lollipop soak test, I was running the the kitkat 4.4.4.
So just like others, I used the first captured 350 mb approx soak test and copied it to external sd and got the lolipop soak test by checking for update. But as we all know , it had few issues , so thankfully some guy uploaded 13 mb incremental file too. I again installed it by copying to sd card and checking for update.
Meanwhile, few people got 7 mb update, but I was so annoyed by the 5.0.2 performance that I never bothered to find out about it. On 14th june, I got picked for Motorola Feedback Network. Anyhow, being bugged by the poor performance of stock soak test 5.0.2 I decided to unlock bootloader and root my device. Incidentally , after unlocking bootloader my mobile factory retested as expected. After booting I got OTA prompt of 5.1 being available . Now , rather than installing I thought of capturing it, so after downloading the 209 mb file I rooted it and captured the ota. (Again I had to go through the painful steps of going back to kitkat 4.4.4 to get back stock recovery, but Nilakanto, OP, helped me with all the correct files so thanks a lot to him). So, all in all, I am running lollipop 5.1 now.
Things needed :
First soak test of 350 mb file
Second soak test of 13 mb.
I never installed the 7mb soak test that was pushed later.
Stock recovery
Locked or unlocked bootloader does not affect it as you all know.
Ofcourse, no root
You may have to rename the file as one user suggested.
Good luck guys.:good:
EDIT : Many users are also getting OTA prompt for 5.1. So , I think everyone running soak tests shall get it sooner or later.
Some screenshots
Here are a few screenshots and available memory after installing 5.1. I did not had any extra app installed.
ivan290 said:
If your phone doesnt detect the update, rename it to .38. It worked for me
Click to expand...
Click to collapse
OMG. Did the 209MB work for you? What did you exactly rename it to?
And thanks Saurabh for the screenshots, I don't know why but they are beautiful
PS. I'm Nilanko
Hi,
tl;dr: Is there a download link available for the WW_V21.40.1220.1698 official firmware?
Details:
I have a ZE600KL and this official page says Marshmallow is released for it.
I have unlocked bootloader and currently stock recovery and ROM, that I've flashed myself by downloading from the official support page (1.16.40.1523_20160426). I've been checking for updates from Settings>About>System Update for a while, to no success. I used to have a root but flashing the 1.16 seems to have removed it. And if I flash TWRP and reboot to recovery, it asks me whether it should leave the system partition untouched. So this makes me think I should be able to receive the OTA, normally. And yet, as I said, no such luck.
I've seen some ROMs that mention they require MM firmware for ZE600KL, such as this one. Again, this makes me thing some people out there must have received the 21.40 update (or any Marshmallow update) for their ZE600KL. I've been searching the internet but I didn't find this firmware anywhere. If somebody knows a link or if by some enormous kindness somebody uploads this, I'd be really grateful.
Thank you in advance to anyone who replies
Edit: I came across this link but I haven't yet been able to verify if it works, will update after I try:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE600KL/UL-Z00L-WW-21.40.1220.1698-user.zip
Second Edit: The zip in the link flashes and boots. I'm sorry to have created a thread and then manage to solve it on my own later, but hopefully this might be helpful to other ZE600KL owners in the future.
As usual since I'm on a factory unlocked S5 I have no access to OTA updates and the Samsung update software is worthless acting like no updates ever. Anyhow, I can't find anyone posting the stock 6.0 file to sideload or Odin. Would someone mind directing me to one or link one? Decided to go with it since ATT released it a week ago according to the change log on August 26th.
So a user in Brazil captured a snapshot of the official OTA soak test and it's been making its rounds on Twitter. Users in Brazil, Mexico, and India can install this without problems but me (USA) and another Twitter user (Germany) are unable to install it. It cannot find the update for some reason. (YES it is in the root of internal storage, YES Motorola update has storage permission, YES I restarted my phone and redownloaded the file many times)
I am not willing to root but I am curious if there is any way I can get this OTA version to work on the USA model of the G5+.
If anyone can help me get Oreo on my phone without root I'd greatly appreciate it! Thank you!
-Slim
slim_radio said:
So a user in Brazil captured a snapshot of the official OTA soak test and it's been making its rounds on Twitter. Users in Brazil, Mexico, and India can install this without problems but me (USA) and another Twitter user (Germany) are unable to install it. It cannot find the update for some reason. (YES it is in the root of internal storage, YES Motorola update has storage permission, YES I restarted my phone and redownloaded the file many times)
I am not willing to root but I am curious if there is any way I can get this OTA version to work on the USA model of the G5+.
If anyone can help me get Oreo on my phone without root I'd greatly appreciate it! Thank you!
-Slim
Click to expand...
Click to collapse
You have to be on 137-92-14 to update (this is the software for India and Brazil).
As you're from US you should be on 137-93-14 or earlier. So there's no way to update your device to Oreo without rooting until the Oreo OTA for reteu/retus get's leaked.
Sent from my Moto G5 Plus using XDA Labs