Database Users

Official UK I9100XWKDD with XEU CSC firmware

Here we go guys, latest official UK firmware
PDA:XWKDD
PHONE: XXKDH
CSC:XEUKD1 (XEU csc)
1. Just put extract the .tar file in the zip archive and put it as the PDA in odin and reboot your phone to download mode.
2. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT DO NOT, TICK REPARTITION.
3. Connect the USB cable and flash
Anyone ask about .pit file needs a beating with a dead Anaconda
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download from here:
http://hotfile.com/dl/116887059/f45e1a7/9100XWKDD_I9100XXKDH_I9100XEUKD1.zip.html
No password needed.

Thank you, trying this out once it downloads.
EDIT:will it remove root?

Intratech said:
Here we go guys, latest official UK firmware
PDA:XWKDD
PHONE: XXKDH
CSC:XEUKD1 (XEU csc)
1. Just put extract the .tar file in the zip archive and put it as the PDA in odin and reboot your phone to download mode.
2. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT DO NOT, TICK REPARTITION.
3. Connect the USB cable and flash
Anyone ask about .pit file needs a beating with a dead Anaconda
Download from here:
http://hotfile.com/dl/116887059/f45e1a7/9100XWKDD_I9100XXKDH_I9100XEUKD1.zip.html
No password needed.
Click to expand...
Click to collapse
Do we need a PIT?
Again, does this get rid of the root? - Is this de-branded UK firmware?

Top stuff, thanks

It's probably been asked many times before, but my phone came from O2 which has their branding. If I were to go for this firmware, would I be able to restore my phone back to O2 Factory setting, as I do not wish to invalidate my warranty?

Thank you, thank you!
Here's the last step I needed to get a UK unbranded handset. Pity I'm going to have to do a wipe to get on XEU CSC

@Rocketpaul: Yes, this will remove root. Re-root in the same way as before
@Robot1000: No, there's no way to restore an older firmware other than to flash that firmware (which currently hasn't been leaked to the web)

I am not yet fully familiar with Samsung terminology but can someone confirm that going to the XEU CSC makes it a completely generic handset?
Thanks!
James

stuclark said:
@Rocketpaul: Yes, this will remove root. Re-root in the same way as before
@Robot1000: No, there's no way to restore an older firmware other than to flash that firmware (which currently hasn't been leaked to the web)
Click to expand...
Click to collapse
Once I root I will get the yellow picture on boot right? which kernal would I use to remove it?

jamesking420 said:
I am not yet fully familiar with Samsung terminology but can someone confirm that going to the XEU CSC makes it a completely generic handset?
Thanks!
James
Click to expand...
Click to collapse
Correct. TEN CHARACTERS

jamesking420 said:
I am not yet fully familiar with Samsung terminology but can someone confirm that going to the XEU CSC makes it a completely generic handset?
Thanks!
James
Click to expand...
Click to collapse
In terms of the software on the phone, YES, going to XEU CSC (which you might have to configure manually, haven't checked yet as still downloading) will make the phone a UK generic / SIM free handset.
The only other thing is the phone's ProductID, which is stored in the nvram.bin file on the phone. I *think* this will change to XEU when you change the CSC, but I need to check. (it is possible to change this manually, but EXTREME CARE NEEDS TO BE TAKEN)
...Either way, I will confirm once I've flashed this on to my phone, in about.... 10 minutes!

rocketpaul said:
Once I root I will get the yellow picture on boot right? which kernal would I use to remove it?
Click to expand...
Click to collapse
Use this one: http://hotfile.com/dl/116892134/92526db/KERNEL_I9100XWKDF.zip.html

So are we mix and matching kernels now?
Would be good if we could extract the kernel out of this firmware for root and re-flash, so it all matches..?

stuclark said:
@Robot1000: No, there's no way to restore an older firmware other than to flash that firmware (which currently hasn't been leaked to the web)
Click to expand...
Click to collapse
Is there any way that I can 'dump' the ROM?

robot1000 said:
Is there any way that I can 'dump' the ROM?
Click to expand...
Click to collapse
Not that I know of, sorry

risq said:
So are we mix and matching kernels now?
Would be good if we could extract the kernel out of this firmware for root and re-flash, so it all matches..?
Click to expand...
Click to collapse
It's fine - that kernel works pretty nicely

stuclark said:
In terms of the software on the phone, YES, going to XEU CSC (which you might have to configure manually, haven't checked yet as still downloading) will make the phone a UK generic / SIM free handset.
The only other thing is the phone's ProductID, which is stored in the nvram.bin file on the phone. I *think* this will change to XEU when you change the CSC, but I need to check. (it is possible to change this manually, but EXTREME CARE NEEDS TO BE TAKEN)
...Either way, I will confirm once I've flashed this on to my phone, in about.... 10 minutes!
Click to expand...
Click to collapse
Thanks, I look forward to an update from you.
Can you please tell me what the process is for configuring the CSC manually?
(A google for "manually configure galaxy CSC" doesn't seem to find a guide for original Galaxy S...)
Thanks!
James

To change CSC if you flashed a multi-CSC file just type *#272*phone imei#
When the menu comes up just select your csc of choice and click on install. It will wipe your phone.

Thanks intratech for a promote and clear response.

does this install a new baseband as well as my signal is very erratic and i put it down to the radio firmware also do you just extract the .tar and put it as pda or do you leave it zipped. Think im being dense but not been to bed yet should sleep before doing this. Cheers
Kenny

Help! Brick?

K, I'm trying to fix my friends verizon note 3, it's stuck in dl mode with the error "Firmware upgrade encountered an issue. Please use software Repair assistant & try again". Phone will NOT connect to kies, I get an error saying "This phone is not supported". My version of kies does see my att n3 just fine though. I can connect to odin it looks like. Cannot boot into recovery, it just boots into dl mode with the error message. Unknown how the phone got in this state.

9wire said:
K, I'm trying to fix my friends verizon note 3, it's stuck in dl mode with the error "Firmware upgrade encountered an issue. Please use software Repair assistant & try again". Phone will NOT connect to kies, I get an error saying "This phone is not supported". My version of kies does see my att n3 just fine though. I can connect to odin it looks like. Cannot boot into recovery, it just boots into dl mode with the error message. Unknown how the phone got in this state.
Click to expand...
Click to collapse
If your in download mode and can get odin to recognize the phone then get the mje tar and Odin back to stock.

Harleydroid said:
If your in download mode and can get odin to recognize the phone then get the mje tar and Odin back to stock.
Click to expand...
Click to collapse
Does it matter which one? No idea what's on the phone.

9wire said:
Does it matter which one? No idea what's on the phone.
Click to expand...
Click to collapse
Is the phone on 4.3 or 4.4.2 right now? If 4.4.2 which one? The full odin sxtp leak or the rooted leaked build by Beanstown?
Edit. I see your not sure what's on the phone now.

No idea. Installed the pit file and can get into recovery and download now but wont boot. Phone hasn't booted since I got it. Here's what I have...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

9wire said:
No idea. Installed the pit file and can get into recovery and download now but wont boot. Phone hasn't booted since I got it. Here's what I have...
Click to expand...
Click to collapse
Yeah I'd try the mje tar located here
http://forum.xda-developers.com/showthread.php?t=2528707
[Firmware][Guide][Q&A] FIRMWARE MIRROR / OTA & ROOT GUIDE / TECHNICAL Q&A
If it works then you can root and do the build by Beans and flash the firmware to get on rooted 4.4.2

downloading mj7 from here, I'm just in the dark about what I have on the phone, it just needs to be stock non-rooted. Didn't know if flashing the .tar would break it if I have a different firmware. I don't know how to find out if the phone won"t boot.
http://forum.xda-developers.com/showthread.php?t=2524572

9wire said:
downloading mj7 from here, I'm just in the dark about what I have on the phone, it just needs to be stock non-rooted. Didn't know if flashing the .tar would break it if I have a different firmware. I don't know how to find out if the phone won"t boot.
http://forum.xda-developers.com/showthread.php?t=2524572
Click to expand...
Click to collapse
No do the MJE tar

Dev host not working for me. Tried to dl several things this afternoon and nothing is working. Had to odin my n2 back to stock so I can sell it.

DL'ing now. Appreciate your time, sir. We'll see what happens.

9wire said:
DL'ing now. Appreciate your time, sir. We'll see what happens.
Click to expand...
Click to collapse
Cool let me know. It should work fine. The only reason it wouldn't is if it was on the unrooted 4.4.2 build.

Harleydroid said:
Cool let me know. It should work fine. The only reason it wouldn't is if it was on the unrooted 4.4.2 build.
Click to expand...
Click to collapse
Whut? Could it be? Ha ha, back from the dead. Only took about 6 hours total. Messed with kies for almost 3 hours before I gave up. Downloaded 2 versions of kies twice, drivers multiple times, 2 .tar files, tried 6 different usb cords...
Thanks for your help @Harleydroid, much appreciated.

Ans a screenie of my slightly modded att n3 for your perusal and enjoyment.

firmware upgrade encountered an issue! Please help

I know I know there's been quiet a few threads about people screwing up and I'm one of them with a little different problem.
So I really appreciate your help
I have a second I9505 running great on XXUEND1 (almost instant GPS lock) and tried very hard to find this modem to flash on my second I9505 but couldn't find it.
So I thought "lets download the stock which will change the modem, and then restore nandroid" Yes I have a TWRP nandroid I made just before this screw up
So I downloaded this stock from sammobile http://www.sammobile.com/firmwares/download/28734/I9505XXUEND1_I9505TELENC1_TEL
I was on:
GPE 4.4.4
Modem: I9505XXUGNK4
Baseband: I9505XXUGNK4
Loaded the stock firmware in PDA/AP and flashed. FAIL!
Now I can get into download more only (no twrp)
I've attached the screen of Odin 3.09
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How on earth can I flash XXUEND1 and then restore my nandroid???
Cheers guys!

Any help guys? I'm getting nervous here...

The cable should be the stock one and should not be on a hub. Try a different port on the computer, and do not panic. The fact you can get into download mode still means all hope isn't lost.
EDIT: You posted this question twice, with the second location being a development thread, where it really doesn't belong. You received a response there as well: http://forum.xda-developers.com/showpost.php?p=59386461&postcount=18244 . In the future don't cross post, no matter how desparate you are.

Strephon Alkhalikoi said:
The cable should be the stock one and should not be on a hub. Try a different port on the computer, and do not panic. The fact you can get into download mode still means all hope isn't lost.
EDIT: You posted this question twice, with the second location being a development thread, where it really doesn't belong. You received a response there as well: http://forum.xda-developers.com/showpost.php?p=59386461&postcount=18244 . In the future don't cross post, no matter how desparate you are.
Click to expand...
Click to collapse
Thank you, it's directly connected to a port that I've flashed with many times.
I even tried other ports but still same thing.
Did I do wrong by trying to flash the 4.3 from 4.4.4? Or is that asking for trouble?
What else can I do?

sirs2k said:
Thank you, it's directly connected to a port that I've flashed with many times.
I even tried other ports but still same thing.
Did I do wrong by trying to flash the 4.3 from 4.4.4? Or is that asking for trouble?
What else can I do?
Click to expand...
Click to collapse
not sure but it might be partitions (.pit file) - for example one was too short and write failed due to no space left
try flashing the one you were using before (or at least 4.4.2).

Strephon Alkhalikoi said:
The cable should be the stock one and should not be on a hub. Try a different port on the computer, and do not panic. The fact you can get into download mode still means all hope isn't lost.
EDIT: You posted this question twice, with the second location being a development thread, where it really doesn't belong. You received a response there as well: http://forum.xda-developers.com/showpost.php?p=59386461&postcount=18244 . In the future don't cross post, no matter how desparate you are.
Click to expand...
Click to collapse
Yes I'm sorry about that. I was really starting to freak out.
Anyhow, I've managed to flash a 4.4.2 with modem and baseband XXUGNH6. I've also flash the latest twrp. But I would still very much love to complete what I wanted to do in the first place. Which is flashing XXUEND1.
I couldn't find it anywhere as a flashable and I couldn't downgrade to 4.3 which is where it is.
Could you guys please help me get this done?
Cheers

not sure if you have .pit file included in package downloaded form sammobile (the one for 4.3) but if so - add .pit and tick re-partition, while flashing 4.3 as you tried before.
re-partition, if it will include data partition will erease all your data - backup your movies, photos, etc before proceeding.
Sent from my TF300T using XDA Free mobile app

th3cr0w said:
not sure if you have .pit file included in package downloaded form sammobile (the one for 4.3) but if so - add .pit and tick re-partition, while flashing 4.3 as you tried before.
re-partition, if it will include data partition will erease all your data - backup your movies, photos, etc before proceeding.
Sent from my TF300T using XDA Free mobile app
Click to expand...
Click to collapse
Thanks mate,
Just managed to get it back to normal bu flashing 4.2.2, then downgraded to 4.3 XXUEND1.
Now the build is showing as XXUEND1. However the bootloader and baseband stayed at XXUGNH6!
IS it possible to flash XXUEND1 modem/baseband on this now?
I've tried compiling the modem flashable but aren't savvy enough! So here are the files if it's possible to flash
Modem: https://mega.co.nz/#!HRNHQZob!WLfbPp...ZHF7pAd5HmC00U
NON-HLOS: https://mega.co.nz/#!iVFjWCZI!jcUyjN...WP8kfnQZbIxDi0
Really appreciate your help!

sirs2k said:
Thanks mate,
Just managed to get it back to normal bu flashing 4.2.2, then downgraded to 4.3 XXUEND1.
Now the build is showing as XXUEND1. However the bootloader and baseband stayed at XXUGNH6!
IS it possible to flash XXUEND1 modem/baseband on this now?
I've tried compiling the modem flashable but aren't savvy enough! So here are the files if it's possible to flash
Modem: https://mega.co.nz/#!HRNHQZob!WLfbPp...ZHF7pAd5HmC00U
NON-HLOS: https://mega.co.nz/#!iVFjWCZI!jcUyjN...WP8kfnQZbIxDi0
Really appreciate your help!
Click to expand...
Click to collapse
Those links ask for password - not sure what would that be
You can always extract modem and non-hlos form your XXUEND1 package downloaded from sammobile and flash them separately via Odin as in here:
http://forum.xda-developers.com/gal...o-flash-modems-baseband-t3028314/post58785261

Boot screen corrupted + many issues after softbrick fix ...

Hi all !
My phone Exynous N910Hwas bricked due to some stupid mistake i made about a month ago but somehow managed to fix it in odin ...
so here is the thing right now when i start the phone or reboot it instead of the samsung galaxy note 4 logo i get this ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
plus the kernal is not seandroid enforcing
and recovery is not seandroid enforcing
i also get lots of errors in twrp when trying to flash a rom ... error 1 and 7 and 225(could be255) i think if am not mistaken
trying to wipe the phone or do a factory reset gives me the error unable to mount storage ... trying to repair file system or changing it also same thing
the phone right now is running resurrection rom android 6.0.1 ... yes somehow despite all the errors i managed to flash that one rom
trying to flash DNS 0.5 rom ends up in a boot loop on that screen then to recovery after a few mins
after i fixed the bootloop i got hold of this firmware N910HXXU1COH4 and managed to flash it but the issues still remain even though i flashed it successfully
at some point i was running several roms using dual boot patcher snapshot and they worked and even dns worked when i flashed it in the app .
when i was fixing the brick i kept getting errors in odin something like nand flash error (been about a month since it happened cant remember the exact error)
think i must have clicked repartition or something and ended up with this mess at the start
so there ... what should i do to fix the phone ?

OK well can anyone share the latest stock firmware and pit file ?think it might fix it if I have the pit ...

faresmasouty said:
OK well can anyone share the latest stock firmware and pit file ?think it might fix it if I have the pit ...
Click to expand...
Click to collapse
http://en.lmgtfy.com/?q=910h+firmware
http://en.lmgtfy.com/?q=910h+pit+file

Rajada said:
http://en.lmgtfy.com/?q=910h+firmware
http://en.lmgtfy.com/?q=910h+pit+file
Click to expand...
Click to collapse
yeah i cant find the last firmware on any site other than sammobile or samfirmwares and both have terrible download speeds (50kbps) ... and i live in SYRIA i get electricity a few hours each day and the download fails every time .
and for the pit file i found one on another post on xda which seemed corrupted here and i dont trust to download a pit somewhere else ...and i wouldn't want to risk hard bricking my phone with a bad pit file .
PS : i actually tried google before posting here ... and my post is to address the boot issue correctly as i am not sure flashing with the pit will actually fix it

faresmasouty said:
yeah i cant find the last firmware on any site other than sammobile or samfirmwares and both have terrible download speeds (50kbps) ... and i live in SYRIA i get electricity a few hours each day and the download fails every time .
and for the pit file i found one on another post on xda which seemed corrupted here and i dont trust to download a pit somewhere else ...and i wouldn't want to risk hard bricking my phone with a bad pit file .
PS : i actually tried google before posting here ... and my post is to address the boot issue correctly as i am not sure flashing with the pit will actually fix it
Click to expand...
Click to collapse
your problem is not living in Syria. Your problem is:
how to use google?
with 15 minutes of electricity, you could have everything you want without opening a single thread:
http://en.lmgtfy.com/?q=extract+pit+file+from+samsung+
http://en.lmgtfy.com/?q=samsung+firmware+downloader

Error

I'm trying to install the factory rom of my samsumg j320m device, I'm using Odin in the current version (I already tested other previous versions) well in Odin no appears no error says that the rom was successfully installed the problem happens when the device it restarts, it goes to the screen that appears the robot of the android and begins to proceed with the installation but when it arrives in 15% or so it goes to that screen of which I can not leave again, I gave several hard reset, I searched the internet and I did not find anything that could solve this problem if someone can help me thank you very much
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hollyxerecas said:
I'm trying to install the factory rom of my samsumg j320m device, I'm using Odin in the current version (I already tested other previous versions) well in Odin no appears no error says that the rom was successfully installed the problem happens when the device it restarts, it goes to the screen that appears the robot of the android and begins to proceed with the installation but when it arrives in 15% or so it goes to that screen of which I can not leave again, I gave several hard reset, I searched the internet and I did not find anything that could solve this problem if someone can help me thank you very much
Click to expand...
Click to collapse
How did you set up Odin? Send a pic of the settings tab

ffpp.2003 said:
How did you set up Odin? Send a pic of the settings tab
Click to expand...
Click to collapse

All seem to be ok. I see that it's a TAR file. Personally, I recommend you that use a .tar.md5 file, other than it takes longer, it's safer, because the file could be corrupted, and using the md5 extension, it makes a full revision of the file, looking for corruptions in the file, or information that is incorrect. I also have a j320m, and that never happened to me. Try redownloading the file, without deleting the .md5 extension. And if still getting that error, I'll give you the Odin version that i use with the j320m and other devices that are working perfectly fine.

ffpp.2003 said:
All seem to be ok. I see that it's a TAR file. Personally, I recommend you that use a .tar.md5 file, other than it takes longer, it's safer, because the file could be corrupted, and using the md5 extension, it makes a full revision of the file, looking for corruptions in the file, or information that is incorrect. I also have a j320m, and that never happened to me. Try redownloading the file, without deleting the .md5 extension. And if still getting that error, I'll give you the Odin version that i use with the j320m and other devices that are working perfectly fine.
Click to expand...
Click to collapse
I recorded a video trying to install the rom and then the error, take a look please. I downloaded the original firmware of the device directly from this site: https://www.sammobile.com/firmwares/galaxy-j3/SM-J320M/ZTO/
I downloaded almost everything from the first rom to the most current and nothing
https://www.youtube.com/watch?v=7bOHrvyJaB4
I also tried installing TWRP to install a custom rom, without success: /

hollyxerecas said:
I recorded a video trying to install the rom and then the error, take a look please. I downloaded the original firmware of the device directly from this site: https://www.sammobile.com/firmwares/galaxy-j3/SM-J320M/ZTO/
I downloaded almost everything from the first rom to the most current and nothing
I also tried installing TWRP to install a custom rom, without success: /
Click to expand...
Click to collapse
Hmmmmmm...
It's so rare...
I don't know why it's doing that. When I get home, I'll give you my Odin version, stock rom, and probably drivers, if I still having it. Other than that... I don't know what is generating that problem.
Sent from my Samsung SM-J320M using XDA Labs

ffpp.2003 said:
Hmmmmmm...
It's so rare...
I don't know why it's doing that. When I get home, I'll give you my Odin version, stock rom, and probably drivers, if I still having it. Other than that... I don't know what is generating that problem.
Click to expand...
Click to collapse
Well, I uploaded the file in OneDrive
https://1drv.ms/u/s!AvJ6DFiBtFQij12NYeyKycNa2VG7
There is a zip, wich contains:
-Drivers
-Latest stock ARO rom (Argentina, without carrier, so, it's basically the same as all other clean ROMs)
-Odin (don't remember what version)
-A tool to download the correct and latest firmware for your device (with correct codes for making your "Firmware status" original again)
The only thing it's that when you install the rom, the status of the phone probably will be modified, 'cause the location of the phone is different than the firmware.
Sent from my Samsung SM-J320M using XDA Labs

ffpp.2003 said:
Well, I uploaded the file in OneDrive
https://1drv.ms/u/s!AvJ6DFiBtFQij12NYeyKycNa2VG7
There is a zip, wich contains:
-Drivers
-Latest stock ARO rom (Argentina, without carrier, so, it's basically the same as all other clean ROMs)
-Odin (don't remember what version)
-A tool to download the correct and latest firmware for your device (with correct codes for making your "Firmware status" original again)
The only thing it's that when you install the rom, the status of the phone probably will be modified, 'cause the location of the phone is different than the firmware.
Sent from my Samsung SM-J320M using XDA Labs
Click to expand...
Click to collapse
Ok, I thank you very much :fingers-crossed:

Tell me if it worked!:laugh:
Sent from my Samsung SM-J320M using XDA Labs