Stuck with Only Odin , a Micro Sd , download mode and android recovery to use to unbrick. How do i do it?
I have the kernel , modem and recovery for jasminerom 5.0 on my computer , can i flash the files with odin to unbrick and get the rom?
If you can access download mode than you have a soft brick and you need to flash the STOCK firmware. Which you can download here. After that downloads boot into download mode, connect your device to your computer open odin and flash the STOCK tar
Related
i managed to unbrick my device with the sd card method .. but in download mode it says device binary custom or somthing .. i wanna flash with odin to restore the phone to completely being stock .. will i brick the device again if i flash it with odin
@moe said:
i managed to unbrick my device with the sd card method .. but in download mode it says device binary custom or somthing .. i wanna flash with odin to restore the phone to completely being stock .. will i brick the device again if i flash it with odin
Click to expand...
Click to collapse
If you flash the stock firmware via odin then factory reset and wipe cache via stock recovery (vol up + home key + power key) every thing will be back to original. Just make sure you flash the correct firmware (i. e. if on NC4 you cannot go backwards).
BEFORE MY PHONE RUNNING ON XSI 5.0 FIRMWARE
AND NOW BY THIS PROCEDURE
SUCCESFUL TO INSTALL BRI 5.0
THIS IS FOR MISMATCH CATCH.IMG.EXT4
ODIN FAIL WHO TRY IT
FOR FLASH WTH HONGKONG TAIWAT FIRMWAE 5.0 WORKING THIS PIT
FIRST U DOWNLOAD
N9005ZSUGOK2 N9005OZSGOK2 N9005ZSUGOK2 FROM SAMMOBILE
THEN DOWNLOAD PIT FILE GIVEN LINK
then download Odin_v3.09
select pit
pad tab select firmware
before connect phone enable usb debugging
then connect phone with download mode
FLASH FIRMWARE
WAIT 5 MINUTE YOUR PHONE STUCK IN BOOT
MUST CWM RECOVERY n9005-cwm-recovery-6.0.4.7-kk(0125) COMPALSARY FLASH
NOW REMOVE BATTERY AND INSERT IT AGAIN
AND GO IN DOWNLOAD MODE
THEN DOWNLOAD CWM RECOVERY FILE GIVEN LINK
CWM RECOVERY.TAR UNDER PDA TAB AND FLASH IT
THEN YOUR PHONE START IN NORMAL BOOT AND EVERYTHING WORKING PERFECTLY
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Before this issue happens i try to root my phone using King Root that i download from kingrootapk.com. After i run that apps my phone died. I try to switch on so many time but didnt work. I download stock ROM from firmwarefile.com for my phone version and run the Odin v 1.85.,.it detect my phone but failed to flash that stock ROM ...Please someone help me.
HELLO... your grand2 is softbricked
i can help you!!!
do this:
A.YOU NEED:
1. a windows os
2.your phone
3. download this stock prerooted https://www.androidfilehost.com/?fid=23329332407574426?fid=23329332407574426
4. download odin 3.09 http://www.devfiles.co/download/CAHmXM6c/Odin_v3.09.zip
5. YOU(lol)
B.1.switch your phone download mode ( power+volume down+home)
2. extract odin and stock prerooted
3. open odin 3.09 select pda or ap and select the extracted stock prerooted (NOT the .zip)
4.connect your phone and you will see in odin on upper right corner @[0:] or something like it means your phone connected
5.now press start and wait
6.let the phone boot alone(if it bootloop open recovery and wipe)
7.CONGRATULATIONS
8. you can open settings and see you baseband version and download the official stock
dont forget to press THANKS
Can i install any rom,recovery, with the help of stock recovery?
My device is not booting at all, it stock at galaxy s4 logo.
I can go to stock recovery & download mode
My pc & odin is not detecting my phone in download mode& recovery mode(I had changed about 10 data cables & 2 laptops windows 7,10 & all version of odin, I had tried installing every samsung drivers,kies, just every thing)
So plz help me out.
No, you can't.
And since your phone is not being detected, the only solution is to take it to a shop.
But if you can boot into odin or download mode then you have still a chance. Be sure you have a samsung driver to be able your computer and odin detect your phone
Is it possible the phone's USB port is damaged?