searching for the cm11s stock recovery for yureka, i found a link here, which gives a file of size 20 mb. this other post links to a file of the same md5 (3c08ac765304a93c8e96c49eb7dcf494). but, this link here gives a smaller file (md5: d3cbc6d68674f5ce0e0dfac6b7db15be).
now, which of the 2 is the correct cm11s stock recovery? i wanna know in order to use it to flash my current setup to stock for upgrading to cm12s. guys, please respond with the correct link. thanks.
m0han said:
....which of the 2 is the correct cm11s stock recovery? .....use it to flash my current setup to stock for upgrading to cm12s.....
Click to expand...
Click to collapse
the latter; i.e., the one of size 8,222,720 bytes and md5 d3cbc6d68674f5ce0e0dfac6b7db15be, at this direct link.
i flashed that and was able to boot into cyanogen recovery without problems. many thanks to @dumtara for the tip.
Thanks for this post
m0han said:
searching for the cm11s stock recovery for yureka, i found a link here, which gives a file of size 20 mb. this other post links to a file of the same md5 (3c08ac765304a93c8e96c49eb7dcf494). but, this link here gives a smaller file (md5: d3cbc6d68674f5ce0e0dfac6b7db15be).
now, which of the 2 is the correct cm11s stock recovery? i wanna know in order to use it to flash my current setup to stock for upgrading to cm12s. guys, please respond with the correct link. thanks.
Click to expand...
Click to collapse
I can't stress enough how much i was looking for this post. Thanku.
Related
Hey guys I recently found an android l Flashable zip for the Nexus 7 flo and I wanted to share it with you. You flash it just like any other rom but there are no gapps. This zip also works with multirom which you can find here
http://forum.xda-developers.com/showthread.php?t=2457063
Download: http://d-h.st/ZA8
In order to have root you have to flash this after you flash the Android L zip
http://download.chainfire.eu/451/SuperSU/
I did not make this all credits go to tassadar.
JazzieBoi said:
Hey guys I recently found an android l Flashable zip for the Nexus 7 flo and I wanted to share it with you. You flash it just like any other rom but there are no gapps. This zip also works with multirom which you can find here
http://forum.xda-developers.com/showthread.php?t=2457063
Download: http://d-h.st/ZA8
In order to have root you have to flash this after you flash the Android L zip
http://download.chainfire.eu/451/SuperSU/
I did not make this all credits go to tassadar.
Click to expand...
Click to collapse
Hey JazzieBoi. Would you mind sharing the original thread that you found the zip on? As much as I would love a zip ready version of L I also don't want to have to start scouring the internet looking for answers if something goes wrong. I would also like to thank the person who compiled the zip for all their hard work.
i will give a try
crookdbill said:
Hey JazzieBoi. Would you mind sharing the original thread that you found the zip on? As much as I would love a zip ready version of L I also don't want to have to start scouring the internet looking for answers if something goes wrong. I would also like to thank the person who compiled the zip for all their hard work.
Click to expand...
Click to collapse
I found the download link here http://forum.xda-developers.com/showthread.php?t=2457063 if you just backup using your recovery u will be fine
JazzieBoi said:
I found the download link here http://forum.xda-developers.com/showthread.php?t=2457063 if you just backup using your recovery u will be fine
Click to expand...
Click to collapse
Alright thanks. Whats funny is that I looked for the zip in that thread and couldn't find it so I appreciate the link. Thanks!
Hi, I was wondering if someone is still using slimkat 9.0 on his D802 or maybe have zip file somewhere on pc.
I was wondering if this 'someone' could upload this rom anywhere, because the slimroms web is down or not i dont know, slimroms said that do not download anything from web page, also I am on stock kk and dont want to flash any of those buggy LP's..
faters said:
Hi, I was wondering if someone is still using slimkat 9.0 on his D802 or maybe have zip file somewhere on pc.
I was wondering if this 'someone' could upload this rom anywhere, because the slimroms web is down or not i dont know, slimroms said that do not download anything from web page, also I am on stock kk and dont want to flash any of those buggy LP's..
Click to expand...
Click to collapse
The SlimRom website is working fine. Download Build 9 for the D802 from their website here.
The SHA1 checksum for the .zip I downloaded a while ago is 29dad9ec369c5db555f20d521605448be75bd5cb and I've been using it with no problems whatsoever. So if you download the .zip and get that SHA1 checksum, the file is fine.
d00lz said:
The SlimRom website is working fine. Download Build 9 for the D802 from their website here.
The SHA1 checksum for the .zip I downloaded a while ago is 29dad9ec369c5db555f20d521605448be75bd5cb and I've been using it with no problems whatsoever. So if you download the .zip and get that SHA1 checksum, the file is fine .
Click to expand...
Click to collapse
I will not brick my phone or anything? I read the official slimkat thread on xda and there was said that do not download anything from website also the download links was removed..
faters said:
I will not brick my phone or anything? I read the official slimkat thread on xda and there was said that do not download anything from website also the download links was removed..
Click to expand...
Click to collapse
Like I said................ check the SHA-1 checksum after you download Build 9 for the D802. If you get the SHA-1 checksum I posted it's okay to flash. I'm living proof and have been using Slimkat for almost a month now.
d00lz said:
Like I said................ check the SHA-1 checksum after you download Build 9 for the D802. If you get the SHA-1 checksum I posted it's okay to flash. I'm living proof and have been using Slimkat for almost a month now.
Click to expand...
Click to collapse
Amm I'm sorry, im still noob at this, how can i check SHA-1 checksum?
faters said:
Amm I'm sorry, im still noob at this, how can i check SHA-1 checksum?
Click to expand...
Click to collapse
http://onlinemd5.com/
or if you're on linux type,
Code:
sha1sum /path/to/slimkat.zip
http://en.wikipedia.org/wiki/Sha1sum
d00lz said:
http://onlinemd5.com/
or if you're on linux just type,
Code:
sha1sum /path/to/slimkat.zip
http://en.wikipedia.org/wiki/Sha1sum
Click to expand...
Click to collapse
Oh, ok, seems that the zip is ok, and i should do the same with the gapps right?
faters said:
Oh, ok, seems that the zip is ok, and i should do the same with the gapps right?
Click to expand...
Click to collapse
Calculate checksums on Windows: HERE
Calculate checksums on the Web: HERE.
Calculate checksums on Linux: sha1sum /path/to/slimkat.zip
Slim-d802-4.4.4.build.9.0-OFFICIAL-8288.zip
SHA1: 29dad9ec369c5db555f20d521605448be75bd5cb
Slim-Addons-mini_gapps.4.4.4.build.9-20150107.zip
SHA1: d720e2a1d73410ee8d79f99d7fd8dfdb6c607e0c
d00lz said:
Calculate checksums on Windows: HERE
Calculate checksums on Windows/Linux: HERE.
Calculate checksums on Linux: sha1sum /path/to/slimkat.zip
Slim-d802-4.4.4.build.9.0-OFFICIAL-8288.zip
29dad9ec369c5db555f20d521605448be75bd5cb
Slim-Addons-mini_gapps.4.4.4.build.9-20150107.zip
d720e2a1d73410ee8d79f99d7fd8dfdb6c607e0c
Click to expand...
Click to collapse
Ok, well thanks for quick responses, I will give a try :good:
***PLEASE DO NOT REPLY IN THIS THREAD UNLESS YOU ARE WORKING ON A ROM. THANK YOU***https://plus.google.com/share?url=http://forum.xda-developers.com/galaxy-s6/general/root-pingpong-root-rom-workshop-thread-t3104639
If you have any questions, please send me a PM.
Due to my limited bandwidth and slow connection to oversea download sites, it takes too long to get new ROM scanned and supported. I need volunteers with knowledge of Odin tarballs and ROM zip packages to help me extracting "useful" part out of the ROM and upload them to speed up the process. Thank you for making this tool better
How to get involved:
1. You need to know how to extract boot.img and system partition files from Odin tarball and recovery flash-able ZIP packages.
2. Pick one of the ROM from the pending list. Please search in thread first to see if anyone is already working on it (and not yet failed). I'll also maintain the list regularly.
3. Search for this ROM on SamMobile or other sources. If you can find it, please reply in this thread in form of "WIP ROM version" so others will know.
4. Download the ROM, extract following pieces:
- boot.img
- /system/build.prop
5. Create a zip file named ROM_version.zip, containing boot.img and build.prop (inside system folder please), and upload it to a mediafire/mega share:
***remove the account, seems it never works***
6. Once done, please update the reply with "DONE ROM version". For any reason it failed or you can't continue, just replace it with "deleted".
ROMs Pending Download:
G925SKSU1A5D6
G925FXXU1AODC
G920IDVU1AOD5
G920PVPU0AOBC
G925AUCU1AOC9
G920VVRU1AOC4
G920FXXU1AODC
G920TUVU1AOC9
No firmware for G925T on SamMobile. Will keep checking.
S6 Edge
Just an exmaple:
DONE G925VVRU1AOC3
dEris said:
No firmware for G925T on SamMobile. Will keep checking.
S6 Edge
Click to expand...
Click to collapse
You can get it here...
http://samsung-updates.com/device/?id=SM-G925T
Drumrocker said:
You can get it here...
http://samsung-updates.com/device/?id=SM-G925T
Click to expand...
Click to collapse
Already tried that. That's going to limit my download to 75kbps. I have a 150mbps fiber connection.
If someone can link me, I will do some downloading
I'm specifically looking for G925TUVU1AOCG
S6 Edge
dEris said:
Already tried that. That's going to limit my download to 75kbps. I have a 150mbps fiber connection.
S6 Edge
---------- Post added at 02:16 AM ---------- Previous post was at 02:11 AM ----------
If someone can link me, I will do some downloading
S6 Edge
---------- Post added at 02:17 AM ---------- Previous post was at 02:16 AM ----------
I'm specifically looking for G925TUVU1AOCG
S6 Edge
Click to expand...
Click to collapse
Isn't 75kbps better than 0kbps !
Guys, please try keep this thread clean. If you are mentioning/quoting a ROM version in the post, just make sure it won't confuse other people searching for it in the thread.
Drumrocker said:
Isn't 75kbps better than 0kbps !
Click to expand...
Click to collapse
404 on those links anyways after you try and start them.
S6 Edge
G925FXXU1AOCV
https://www.androidfilehost.com/?fid=23991606952600755
G925SKSU1AOD5
https://www.androidfilehost.com/?fid=23991606952600772
G920R4TYU1AOCB
https://www.androidfilehost.com/?fid=23991606952600773
G925W8VLU1AOCG
https://www.androidfilehost.com/?fid=23991606952600767
G925TUVU1AOCG
https://www.androidfilehost.com/?fid=23991606952600766
Zi.Droid said:
content removed
Click to expand...
Click to collapse
Thank you! Would you create a folder "system" in the zip and add build.prop as well?
deleted G925R4TYU1AOD3
deleted G920R4TYU1AOCB
I am once again attempting these ROMs.
Hey can I just extract my boot.img and my build.prop from phone and send you that? or do you need me to download the stock sammobile odin tarball and then extract it from there
gundal said:
Hey can I just extract my boot.img and my build.prop from phone and send you that? or do you need me to download the stock sammobile odin tarball and then extract it from there
Click to expand...
Click to collapse
You will need root to extract boot.img but it you can do so, yes, please.
Btw, please PM me question instead of reply in this thread. Let's try to keep it clean for just ROM workshop.
idler1984 said:
Thank you! Would you create a folder "system" in the zip and add build.prop as well?
Click to expand...
Click to collapse
getting build.prop for every ROM will require unpacking the whole system partition
If you are searching the fingerprint I believe that it is: 5.0.2/LRX22G/build:user/release-key for all EU/US
Canadian S6 ROM Dump
DONE G925W8VLU1AOCG G920W8VLU1AOCG(Canadian S6 - All carriers)
Sent you a PM with the link as your MediaFire account seems to be locked out from being logged on from too many locations
Edit - how embarassing - the ROM I uploaded is the G920 (non-edge). My apologies!
G925FXXU1AOCV for S6 Edge
DONE G925FXXU1AOCV: Link to extracted boot.img & build.prop (the latter is from my phone. The boot.img from the image mentioned above.
Can support G9200ZCU1AOD9？
View attachment G9200ZCU1AOD9.zip
done g925tuvu1aocg
Dont see this version listed but will help a lot of middle east users of the G925F
build G925FXXU1AOD4 (boot.img pulled from kies temporary firmware file,build.prop from adb)
https://mega.co.nz/#!FBxzEBIA!8UoDyuN8wIMEl0Up3IwfxfvZmG8j_oxaRyZ9nWs5XbA
have the full firmware if needed also, will appreciate if you support this build number.
Couldn't one just extract the boot img and build.prop from their device an upload? Saves a lot of un needed rom downloading if the user does not need it.
Url's removed
*note* This file is mainly here for rom developers looking to build a custom rom or extract files/patches to apply to other models. It can't be used to repair a bad update as patches will not apply twice.
nice, i hope someone can make it compatible with Y
and btw ... there are typos in your signature : 16 MB / 32 MB for your nexuses
keyra74 said:
nice, i hope someone can make it compatible with Y
and btw ... there are typos in your signature : 16 MB / 32 MB for your nexuses
Click to expand...
Click to collapse
The signature reflects the specific models I purchased and the amount of ram/rom they had. As such it appears accurate to me.
it's 16 GB and 32 GB, if it was MB you wouldn't even install anything
How do you install this?
Sweet! So just flash in recovery?
neilownz said:
How do you install this?
Click to expand...
Click to collapse
The short answer, and it's not intended to be ugly, is that if you have to ask it's not a file you should be installing.
It's easier to get it from the system updater....this is primarily intended for folks doing rom work or want to extract the patches to see what might be applied to the other models. It could be sideloaded via twrp for the specific firmware/model listed if they needed to for a particular reason.
famewolf said:
The short answer, and it's not intended to be ugly, is that if you have to ask it's not a file you should be installing.
It's easier to get it from the system updater....this is primarily intended for folks doing rom work or want to extract the patches to see what might be applied to the other models. It could be sideloaded via twrp for the specific firmware/model listed if they needed to for a particular reason.
Click to expand...
Click to collapse
It died on verifying system because I don't have that Google bloat installed. Oh well.
Quick question. I've flashed .bin files via odin, what do I do here?
It's simply a renamed zip. Change .bin to .zip and you can open it.
@purple.epod and others....I'm uploading an unrooted system image with boot (we need the kernel to match the system) to mega and will post the url when it completes tomorrow sometime. That file can be used to flash via twrp to the latest version and skip all the interim steps. Keep an eye out for it.
Sorry for so many questions -_- Lol. But flash this? Or the one you're talking about uploading?
capeorigins said:
Sorry for so many questions -_- Lol. But flash this? Or the one you're talking about uploading?
Click to expand...
Click to collapse
The average user should use the file being uploaded in the system image thread. This url was for folks doing work on rom's.
@purple.epod and others....I'm uploading an unrooted system image with boot (we need the kernel to match the system) to mega and will post the url when it completes tomorrow sometime. That file can be used to flash via twrp to the latest version and skip all the interim steps. Keep an eye out for it.
Click to expand...
Click to collapse
Okay, awesome, thank you!
how do i install this? TWRP or by the system update in storage?
EDIT: its giving me decryption error :/ i cant download it
Url/file removed and a request has been sent to the mod's to delete this thread.
Rom dev's if you need the latest update file to examine patches etc please contact me in PM.
Thread closed at user's request.
Hi guys,
Since I am on a distant island, I cannot download the whole rom to restore the original boot.img/kernel to the finally do the official pixel update.
I attached a screenshot with the exact version. Looking back it wasn't the best idea to replace kernel while driving away from civilization.
Thanks in advance
Please? Upload the small boot.img for me?
mad-murdock said:
Please? Upload the small boot.img for me?
Click to expand...
Click to collapse
Hi, Can you share the path/location for boot.img? I can try to extract it. I am using non rooted Pixel 4 at&t version if that makes any difference.
tiniwings said:
Hi, Can you share the path/location for boot.img? I can try to extract it. I am using non rooted Pixel 4 at&t version if that makes any difference.
Click to expand...
Click to collapse
Sure, you download QD1A.190821.014 for pixel 4 (flame) ... It's about 2.5gb
You download from here https://developers.google.com/android/images
You extract the zip. Inside are a few other zips. You unpack boot.img from the biggest zip. You upload the boot.img i.e. on Google drive for me to download.
I would be amazed if you did this. I would resorte original kernel and then can do the update.
Cheers mate
mad-murdock said:
Sure, you download QD1A.190821.014 for pixel 4 (flame) ... It's about 2.5gb
You download from here https://developers.google.com/android/images
You extract the zip. Inside are a few other zips. You unpack boot.img from the biggest zip. You upload the boot.img i.e. on Google drive for me to download.
I would be amazed if you did this. I would resorte original kernel and then can do the update.
Cheers mate
Click to expand...
Click to collapse
Uploaded the boot.img file for Version: 10.0.0 (QD1A.190821.014, Nov 2019) , it will expire in 7 days.
https://send.firefox.com/download/cb53a264cf61be8a/#55p9TdtJaGzBMKLpNhKJZQ
Thank you so much, mate. Trying to flash now. If you don't hear from me soon, something went wrong
The kernel worked. Unfortunately I still cannot update my system. No idea why.