I tried flashing the latest TWRP (downloaded from their website), after entering recovery mode , i just get a blank screen.
Tried even an older build found on XDA YU forum. , and the result is same.
After rebooting the phone, it reverts back to the stock cyanogenmod recovery.
I even tried CWM recovery and even in that i get a blank screen.
I am on official CM12-lollipop 5.0.2 build.
Any help?
newaryans99 said:
I tried flashing the latest TWRP (downloaded from their website), after entering recovery mode....I am on official CM12-lollipop 5.0.2 build....
Click to expand...
Click to collapse
for a twrp that works on CM12-lollipop 5.0.2 yu yureka, go here. be sure to follow the dev's instructions to the letter. wouldn't hurt to read the whole thread.
thank you so much. that worked.
m0han said:
for a twrp that works on CM12-lollipop 5.0.2 yu yureka, go here. be sure to follow the dev's instructions to the letter. wouldn't hurt to read the whole thread.
Click to expand...
Click to collapse
Its worked like charm. None of other CWM/TWRP recovery available on several sites worked for me. I flashed it through fastboot method and it worked fine.
Second method explained has not been tested by me. So fastboot method is tested and works great.
Thanks
m0han said:
for a twrp that works on CM12-lollipop 5.0.2 yu yureka, go here. be sure to follow the dev's instructions to the letter. wouldn't hurt to read the whole thread.
Click to expand...
Click to collapse
Thanks man only this file of twrp worked I tried other cwm recoveries but it did not worked.
Related
Alright so today I bricked my g2 (not a huge problem, generally) installing this http://forum.xda-developers.com/showthread.php?t=2502789 on my vs980. I installed it normal then all my phone did was boot into a fastboot screen [700]udc_start() . So I am trying to unbrick through this guide http://www.lg-phones.org/how-to-flash-unbrick-lg-g2-back-to-stock.html and it only gets to 49% then says it does not work. If anybody here has a solution to this I beyond appreciate it.
Additional Note. I was on CWM and then I used Flashify to flash TWRP 2.6.3.2 img and then I tried installing rom and that's where it went down
Ars3nal said:
Alright so today I bricked my g2 (not a huge problem, generally) installing this http://forum.xda-developers.com/showthread.php?t=2502789 on my vs980. I installed it normal then all my phone did was boot into a fastboot screen [700]udc_start() . So I am trying to unbrick through this guide http://www.lg-phones.org/how-to-flash-unbrick-lg-g2-back-to-stock.html and it only gets to 49% then says it does not work. If anybody here has a solution to this I beyond appreciate it.
Additional Note. I was on CWM and then I used Flashify to flash TWRP 2.6.3.2 img and then I tried installing rom and that's where it went down
Click to expand...
Click to collapse
Try this method, I have had success with this method a couple of times already. Who is your carrier, there are more detailed info in your carrier development forums.
http://forum.xda-developers.com/showthread.php?t=2432476
Jimi Mack said:
Try this method, I have had success with this method a couple of times already. Who is your carrier, there are more detailed info in your carrier development forums.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
It did the same thing and stopped at 49%...can't explain it.
Yeah sorry, I am on Verizon so I have done it with the TOT files not the other method. Check around your your carriers Development forum.
I posted yesterday on this topic but wanted to give an update.
I downloaded the cyanogenmod for my LG G2. The you tube video I watched as watch?v=tyBc45ScZzw. When I try to reboot into revovery mode all I get a black screen and little Android guy with a red triangle over the top and a exclamation point in it.
\\\
Any help as to what I am doing wrong to get into recovery mode? I actually factory defaulted yestersday and tried again and the same thing is happening.
Thanks for the help
TheBull50 said:
I posted yesterday on this topic but wanted to give an update.
I downloaded the cyanogenmod for my LG G2. The you tube video I watched as watch?v=tyBc45ScZzw. When I try to reboot into revovery mode all I get a black screen and little Android guy with a red triangle over the top and a exclamation point in it.
\\\
Any help as to what I am doing wrong to get into recovery mode? I actually factory defaulted yestersday and tried again and the same thing is happening.
Thanks for the help
Click to expand...
Click to collapse
Seems you haven't installed a custom recovery yet buddy, if you tried, you've failed.
First root your phone, then install a custom recovery, then try again booting into your recovery.
If your already on stock kk, I don't believe you can install a custom recovery yet, only root it. So you would first have to downgrade back to JB.
Check the
Merfy said:
Seems you haven't installed a custom recovery yet buddy, if you tried, you've failed.
First root your phone, then install a custom recovery, then try again booting into your recovery.
If your already on stock kk, I don't believe you can install a custom recovery yet, only root it. So you would first have to downgrade back to JB.
Check the
Click to expand...
Click to collapse
What would be the best custom recovery to install? I def know my phone is rooted. That I already check. I have yet to go up to KK . My phone says Android Version 4.2.2
TheBull50 said:
What would be the best custom recovery to install? I def know my phone is rooted. That I already check. I have yet to go up to KK . My phone says Android Version 4.2.2
Click to expand...
Click to collapse
Well there only 2 options really, I'd say TWRP is more user friendly, so i would recommend that to you, before installing a rom first read the instructions and make sure they haven't first recommend a recovery for that specific rom installation.
Once you have a custom recovery its very simple to switch between them.
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2469995
It's an old method but is very easy. This will install twrp but an old version.
So before using the method above first download the latest twrp onto your phone, i don't know what version of the g2 you have so if you reply i can try point you to the latest, but if you search for twrp 2.7 for your phone you should find it. You want it in .zip format.
So after saving the file to your phone, go ahead and follow the instructions above, if it says it successful, try booting into recovery again, the same way you managed to format your phone but this time it should boot your recovery, then press install .zip and flash the latest twrp.
Then your ready to go! just follow the instructions for the roms you'd like and flash them.
Best of Luck!
Merfy said:
Well there only 2 options really, I'd say TWRP is more user friendly, so i would recommend that to you, before installing a rom first read the instructions and make sure they haven't first recommend a recovery for that specific rom installation.
Once you have a custom recovery its very simple to switch between them.
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2469995
It's an old method but is very easy. This will install twrp but an old version.
So before using the method above first download the latest twrp onto your phone, i don't know what version of the g2 you have so if you reply i can try point you to the latest, but if you search for twrp 2.7 for your phone you should find it. You want it in .zip format.
So after saving the file to your phone, go ahead and follow the instructions above, if it says it successful, try booting into recovery again, the same way you managed to format your phone but this time it should boot your recovery, then press install .zip and flash the latest twrp.
Then your ready to go! just follow the instructions for the roms you'd like and flash them.
Best of Luck!
Click to expand...
Click to collapse
I'm using a Verizon LG G2 VS980 . I just downloaded TWRP 2.7 though so I am going to give that a go !!
So yeah i installed Marshmallow on my K3 Note via the OTA update (had to replace CWM with stock recovery for it to work, but in the end it did)
Now the question is, how do i root my phone?
Will the same Lollipop process work for Marshmallow?
I dont think that method will work.
Read here: http://www.needrom.com/download/row-s422/
please help me too..!!!
shinudgr8 said:
So yeah i installed Marshmallow on my K3 Note via the OTA update (had to replace CWM with stock recovery for it to work, but in the end it did)
Now the question is, how do i root my phone?
Will the same Lollipop process work for Marshmallow?
Click to expand...
Click to collapse
i had tried everything no use.. anyone please help to root the update version... lenovo k3 note...:crying::crying::crying::crying::crying::crying:
Alright, I first updated my phone to marshmallow, then flashed twrp recovery. Until then everything was alright, it was working just fine.
Then I installed the update.zip for lollipop to root it, and installed the zip via twrp.
It resulted in my phone going into something we all know as "soft brick". It did proceed the lenovo screen, but after that I was greeted with an static black screen. ADB wasn't working either, so I couldn't boot it into bootloader or recovery. I manually booted into the recovery mode using the button sequence (volUp+volDown+power) and wiped the data. Nothing, still didn't boot. Then I finally gave up, downloaded the stock lollipop rom from somewhere, and flashed it via spflash tool. Then updated everything back to marshmallow
In short, the old twrp and cwm recoveries (probably, mostly actually) work with marshmallow, so I guess that's a start
it work well...
shinudgr8 said:
Alright, I first updated my phone to marshmallow, then flashed twrp recovery. Until then everything was alright, it was working just fine.
Then I installed the update.zip for lollipop to root it, and installed the zip via twrp.
It resulted in my phone going into something we all know as "soft brick". It did proceed the lenovo screen, but after that I was greeted with an static black screen. ADB wasn't working either, so I couldn't boot it into bootloader or recovery. I manually booted into the recovery mode using the button sequence (volUp+volDown+power) and wiped the data. Nothing, still didn't boot. Then I finally gave up, downloaded the stock lollipop rom from somewhere, and flashed it via spflash tool. Then updated everything back to marshmallow
In short, the old twrp and cwm recoveries (probably, mostly actually) work with marshmallow, so I guess that's a start
Click to expand...
Click to collapse
no ya it works well.. but cant find a way root it....
ChainFire Beta SuperUser for Marshmallow K3 Note
Hi,
You may try the steps "androiding.how" on how to root the Lenovo K3 Note after the Marshmallow OTA update.
NOTE : THE ABOVE WOULD ONLY WORK THROUGH CWM/TWRP Recovery. Use the older Lollipop TWRP/CWM recovery. It should work.
Where is the link??
Fizix7 said:
Where is the link??
Click to expand...
Click to collapse
androiding.how is the website. Just go to the website and you will find the information on the webpage. It wont let me put the link in the post.
Hope it helps!!
massguy786 said:
androiding.how is the website. Just go to the website and you will find the information on the webpage. It wont let me put the link in the post.
Hope it helps!!
Click to expand...
Click to collapse
Interesting, never thought it could be this easy, I literally installed marshmallow the other day and now hopefully now I can root it again
So what's the final verdict boss? Did you try the process yourself? Was it successful? Or am I to be the first guinea pig?
I also got back to stock recovery from TWRP. but my update to marshmallow failed, can you help? I had rooted with Lenovo k3 note manager by prince3v. it also installed twrp. Using the same tool I went back to stock. Thanks.
shinudgr8 said:
Alright, I first updated my phone to marshmallow, then flashed twrp recovery. Until then everything was alright, it was working just fine.
Then I installed the update.zip for lollipop to root it, and installed the zip via twrp.
It resulted in my phone going into something we all know as "soft brick". It did proceed the lenovo screen, but after that I was greeted with an static black screen. ADB wasn't working either, so I couldn't boot it into bootloader or recovery. I manually booted into the recovery mode using the button sequence (volUp+volDown+power) and wiped the data. Nothing, still didn't boot. Then I finally gave up, downloaded the stock lollipop rom from somewhere, and flashed it via spflash tool. Then updated everything back to marshmallow
In short, the old twrp and cwm recoveries (probably, mostly actually) work with marshmallow, so I guess that's a start
Click to expand...
Click to collapse
That supersu file is the one causing problem. I started from scratch, and got marshmallow working. But as soon as I flash data.zip file, it gets stuck at empty black screen. It works without supersu fine, sadly no root.
shinudgr8 said:
Interesting, never thought it could be this easy, I literally installed marshmallow the other day and now hopefully now I can root it again
So what's the final verdict boss? Did you try the process yourself? Was it successful? Or am I to be the first guinea pig?
Click to expand...
Click to collapse
LOL... It will work.. You are not the Guinea pig...
found this info from this source
http://androiding.how/huawei-mate-8-nougat-root-twrp/
Thank you for the info; I was waiting for this.
Any idea where is the developer's thread or site; androiding.how didn't provide the link.
As far as I know this was for honor 8. @LastStandingDroid built for honor 8 nougat. It currently cannot flash SuperSU anyway
Thank you! I have just found LastStandingDriod thread.
I have tried this TWRP. You can boot into TWRP, touch is fine. But it cannot flash supersu into system. Got a reboot when I tried to do that.
insideccw said:
I have tried this TWRP. You can boot into TWRP, touch is fine. But it cannot flash supersu into system. Got a reboot when I tried to do that.
Click to expand...
Click to collapse
Did you try SR3 SuperSU?
insideccw said:
I have tried this TWRP. You can boot into TWRP, touch is fine. But it cannot flash supersu into system. Got a reboot when I tried to do that.
Click to expand...
Click to collapse
To me I spend exactly the same thing, twrp is fine, but the root no.
To wait for someone to do it and tell us how
thanks for the info.
tried it...
can boot to recovery... but cant do anything else
Hi xda,
I'm new into the world of flashing so any help would be nice.
I used this tuto:
https://rootmydevice.com/tutorials/root-samsung-galaxy-a40/
and downloaded twrp image from this post:
https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t3968586
After flash phone restarted as intented but it keeps booting, I tried also some methods how to enter recovery mode while bootlooping but they didn't work out. I also want to flash pixel experience rom.
Thanks for any help provided.
Use the TWRP from this thread.
Your TWRP is not working anymore with actual firmware.
ruffyrisco said:
Use the TWRP from this thread.
Your TWRP is not working anymore with actual firmware.
Click to expand...
Click to collapse
Thanks I'll check that tomorrow
Ok, thanks for help, my ROM is currently booting
flash vbmeta