Database Users

Region Firmware Question

I'm trying to update my SM-P605 Galaxy Note 10.1 2014 LTE to P605XXUBMJ9 and I am so confused by the manual process. I can't do OTA because I rooted and when I go to a ROM download site there are all these regions and carriers mentioned. I'm worried about bricking my device or carrier locking it to a company thousands of miles away. Can you help? Sorry for being so dumb but I've never bought a device outside of a store where they set everything up for you.
Current specs:
Android 4.3
P605XXUBMJ4 Baseband
3.4.0-1927787 [email protected] #1 Kernel
JSS15J.P605ZSUBMJ6 Build number
Enforcing SEPF_SM-P605_4.3_0002 SELinux status
I'm currently in the USA, using T-Mobile, and I was told by Amazon that the device is unlocked.

thatblokematti said:
I'm trying to update my SM-P605 Galaxy Note 10.1 2014 LTE to P605XXUBMJ9 and I am so confused by the manual process. I can't do OTA because I rooted and when I go to a ROM download site there are all these regions and carriers mentioned. I'm worried about bricking my device or carrier locking it to a company thousands of miles away. Can you help? Sorry for being so dumb but I've never bought a device outside of a store where they set everything up for you.
Current specs:
Android 4.3
P605XXUBMJ4 Baseband
3.4.0-1927787 [email protected] #1 Kernel
JSS15J.P605ZSUBMJ6 Build number
Enforcing SEPF_SM-P605_4.3_0002 SELinux status
I'm currently in the USA, using T-Mobile, and I was told by Amazon that the device is unlocked.
Click to expand...
Click to collapse
Being that its a ZS build it looks like its from China.
I would only flash P605ZS***** Builds if you are worried about locking it by mistake.
FYI: The first two digits after the model number are the region
http://www.cpkb.org/wiki/Samsung_firmware_naming_conventions#2._Region_code

scrosler said:
Being that its a ZS build it looks like its from China.
I would only flash P605ZS***** Builds if you are worried about locking it by mistake.
FYI: The first two digits after the model number are the region
http://www.cpkb.org/wiki/Samsung_firmware_naming_conventions#2._Region_code
Click to expand...
Click to collapse
Thank you a million times. I feel like such an idiot :S Do you know if there's an upgrade to MJ9 yet in the China region? Do I need to take any extra precautions to ensure it stays carrier unlocked and usable in the United States.

thatblokematti said:
Thank you a million times. I feel like such an idiot :S Do you know if there's an upgrade to MJ9 yet in the China region? Do I need to take any extra precautions to ensure it stays carrier unlocked and usable in the United States.
Click to expand...
Click to collapse
My understanding is the partition that holds the carrier info / locking info is not touched during a flash with Odin. HOWEVER, I never got into that unlocked device thing because I never had a need to.
Someone else may be better suited to the question than I but as long as you flash ZS based firmwares you should be fine as I did not see a carrier listed for that tablet in China so they may all be unlocked.
Actually, I only think the Verizon one is going to be the locked one but I dont know.

scrosler said:
My understanding is the partition that holds the carrier info / locking info is not touched during a flash with Odin. HOWEVER, I never got into that unlocked device thing because I never had a need to.
Someone else may be better suited to the question than I but as long as you flash ZS based firmwares you should be fine as I did not see a carrier listed for that tablet in China so they may all be unlocked.
Actually, I only think the Verizon one is going to be the locked one but I dont know.
Click to expand...
Click to collapse
You are very helpful in my quest to not ruin an expensive tablet. Do you know if there's an upgrade compatible with ZS for the MJ9 update? I honestly don't mind waiting if there's a chance I'll turn it into a paper weight. Not even a Kit Kat build just some bug fixes from what I understand.
Again, thanks for your help.

I just don't understand all the carrier builds of MJ9. Bloody heck some of em even have custom names which would be a good sign it's specific to region/carrier. So confused by this all

So maybe unroot your device and then you will have an Ota Update... Because if you'll use Odin for flash other firmware you won't be rooted yet, i think.

chabasse said:
So maybe unroot your device and then you will have an Ota Update... Because if you'll use Odin for flash other firmware you won't be rooted yet, i think.
Click to expand...
Click to collapse
Aren't OTA updates issued by providers? T-Mobile doesn't support this device so there's not going to be an MJ9 update. Ever. It's using an LTE frequency not even found in the States. I just bought it online because I didn't want to wait for somebody here to give me support. I'm simply trying to do a manual update without my device being a paperweight or waking up to expect a connection from cellular towers in Asia.

[Q] Help me! (firmware, modem, etc.)

hey guys,
i recently traded my korean s4 lte-a phone for a galaxy note sm-n9005. i am not certain where it is from originally, as the guy who has the phone isn't very smart about phones.
my main question/concern is how can i upgrade to kit kat while making sure that it is compatible with the SK Telecom network in Korea? I am currently in Korea and would like to root and upgrade the ROM. Would I need to use the SK Telecom stock rom (it is a different model than what I have) and get it to work on my sm-n9005? Or would I need to mess with the settings on ODIN when I run the new stock rom through odin?
Here is some info about my phone. It DOES currently work with the Korean network, although the signal is weaker than my old S4.
basically, can someone tell me which country/network firmware i can use for roms and whatnot? do i have the option of both a korean firmware and foreign one?
thanks in advance!

skim234 said:
hey guys,
i recently traded my korean s4 lte-a phone for a galaxy note sm-n9005. i am not certain where it is from originally, as the guy who has the phone isn't very smart about phones.
my main question/concern is how can i upgrade to kit kat while making sure that it is compatible with the SK Telecom network in Korea? I am currently in Korea and would like to root and upgrade the ROM. Would I need to use the SK Telecom stock rom (it is a different model than what I have) and get it to work on my sm-n9005? Or would I need to mess with the settings on ODIN when I run the new stock rom through odin?
Here is some info about my phone. It DOES currently work with the Korean network, although the signal is weaker than my old S4.
basically, can someone tell me which country/network firmware i can use for roms and whatnot? do i have the option of both a korean firmware and foreign one?
thanks in advance!
Click to expand...
Click to collapse
A little search would have shown you some apps for that, for instance:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
From your pics the main (and most pressing) advice I can give is to stop immediately any updates AND security updates - if you are MI2 you can probably root with URDLV and keep knox 0x0! Read more around about that.

xclub_101 said:
A little search would have shown you some apps for that, for instance:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
From your pics the main (and most pressing) advice I can give is to stop immediately any updates AND security updates - if you are MI2 you can probably root with URDLV and keep knox 0x0! Read more around about that.
Click to expand...
Click to collapse
the problem is that i have no idea which versions of roms i can use that will be compatible with my network in korea.
this phone is unique. the corners aren't rounded- they are sharp corners. i got this phone from someone whose uncle is a samsung exec in london. i was told this phone was only given out to higher-ups at samsung.

skim234 said:
the problem is that i have no idea which versions of roms i can use that will be compatible with my network in korea.
this phone is unique. the corners aren't rounded- they are sharp corners. i got this phone from someone whose uncle is a samsung exec in london. i was told this phone was only given out to higher-ups at samsung.
Click to expand...
Click to collapse
Run the program linked in my post above. You might also want to post a picture of the phone itself just for the curiosity of seeing a rare model on Note 3.

xclub_101 said:
Run the program linked in my post above. You might also want to post a picture of the phone itself just for the curiosity of seeing a rare model on Note 3.
Click to expand...
Click to collapse
It says it's from France. So I can use a french modem (csc) and be ok in Korea?

I will post a pic of my actual phone when I have time to do it. It looks like a Sony Bravia because of the sharp edges.

skim234 said:
It says it's from France. So I can use a french modem (csc) and be ok in Korea?
Click to expand...
Click to collapse
You might want to mask over the IMEI - I doubt it can be easily used but that is the normal way to do things here on XDA.
The results are a little fascinating - it looks like an early build - and the part that the knox warranty was not yet present is even more interesting - DEFINITELY do not upgrade anything for the moment! Also I would bet that you do not have any region lock, so I doubt that you have any major reason to upgrade in a hurry. Even if you DO upgrade at some point you should first save your (rare, non-knox) firmware/bootloader (that version is not listed for instance at http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=XEF#firmware and without saving it you might never be able to return to it). Also the bootloader might be interesting in the "fight against the knox warranty flag".
From what I know SK Telekom is using a model called here N900S and 2G and 3G should be perfectly compatible with the current modem that you have. For LTE the EU model is listed with 800/850/900/1800/2100/2600 while the N900S has 700/850/1800 - so except the 700MHz band it might still work on LTE with SK!
There is also a local thread for those original models from South Korea:
http://forum.xda-developers.com/showthread.php?t=2484602
If you have some time it might also be interesting to go in 'download mode" and get a picture from there - here is a picture on how it looks with bootloaders that have knox.

xclub_101 said:
You might want to mask over the IMEI - I doubt it can be easily used but that is the normal way to do things here on XDA.
The results are a little fascinating - it looks like an early build - and the part that the knox warranty was not yet present is even more interesting - DEFINITELY do not upgrade anything for the moment! Also I would bet that you do not have any region lock, so I doubt that you have any major reason to upgrade in a hurry. Even if you DO upgrade at some point you should first save your (rare, non-knox) firmware/bootloader (that version is not listed for instance at http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=XEF#firmware and without saving it you might never be able to return to it). Also the bootloader might be interesting in the "fight against the knox warranty flag".
From what I know SK Telekom is using a model called here N900S and 2G and 3G should be perfectly compatible with the current modem that you have. For LTE the EU model is listed with 800/850/900/1800/2100/2600 while the N900S has 700/850/1800 - so except the 700MHz band it might still work on LTE with SK!
There is also a local thread for those original models from South Korea:
http://forum.xda-developers.com/showthread.php?t=2484602
If you have some time it might also be interesting to go in 'download mode" and get a picture from there - here is a picture on how it looks with bootloaders that have knox.
Click to expand...
Click to collapse
The LTE IS working with SK, as well as the network. I'm just so lost about what kind of custom roms/kernels I can use that are compatible with my phone.
When you say backup my bootloader, how do I do that? EFS backup? Remember, my phone isn't rooted yet. Do you think I could use any N9005 4.3 root?

skim234 said:
The LTE IS working with SK, as well as the network. I'm just so lost about what kind of custom roms/kernels I can use that are compatible with my phone.
When you say backup my bootloader, how do I do that? EFS backup? Remember, my phone isn't rooted yet. Do you think I could use any N9005 4.3 root?
Click to expand...
Click to collapse
I am glad to hear about LTE! (it means that the 700MHz band is not that essential).
Custom ROMs might be a little further away (N9005 by the way, when done OK it might work with many N9005 ROMs), IMHO there are other things that can be done first that would make your phone better/faster.
If you want to root here is the sequence that I suggest:
- save everything that you have on the phone (if you have a LOT of stuff - to Google, Samsung, Samsung Kies or local with Helium)
- make certain that reactivation lock is OFF
- factory-reset the phone
- disable any update (say that you don't agree with the terms when asked) and disable any security update (that one is a separate setting in Security)
- use Saferoot first to try to root:
http://forum.xda-developers.com/showthread.php?t=2565758
- if it works the very next step after getting root is to save as much as possible from the original firmware (you might also need to install busybox before that):
http://forum.xda-developers.com/showpost.php?p=50011586&postcount=26
- if that succeeds and you have a 256MB debrick.bin please compress it (7z is pretty effective but ZIP will also be OK) and please upload it somewhere so that people that are trying to crack knox will have another thing to look at! :good:

skim234 said:
The LTE IS working with SK, as well as the network. I'm just so lost about what kind of custom roms/kernels I can use that are compatible with my phone.
When you say backup my bootloader, how do I do that? EFS backup? Remember, my phone isn't rooted yet. Do you think I could use any N9005 4.3 root?
Click to expand...
Click to collapse
Have you managed to do anything with the phone? Have you ever managed to enter download mode? How does that one look? (a picture would be great, and that way we would also see the unusual corners).

xclub_101 said:
Have you managed to do anything with the phone? Have you ever managed to enter download mode? How does that one look? (a picture would be great, and that way we would also see the unusual corners).
Click to expand...
Click to collapse
i've screwed with my phone too much and now it doesn't make phone calls consistently. =( do you have any idea how i can connect consistently with sk telecom in korea?

skim234 said:
i've screwed with my phone too much and now it doesn't make phone calls consistently. =( do you have any idea how i can connect consistently with sk telecom in korea?
Click to expand...
Click to collapse
What do you mean by that? What have you done?

skim234 said:
i've screwed with my phone too much and now it doesn't make phone calls consistently. =( do you have any idea how i can connect consistently with sk telecom in korea?
Click to expand...
Click to collapse
Very strange, your phone's Manufacturing date does NOT match with the Serial Number.

Can you post pictures of the phone itself?

[Q] g900t-want to change the rom to g900w8

i have g900t i want to flash on it g900w8 rom(for hebrew language)
but the baseband need stay on g900t
look the result

how
someone can help me get into this sulution?

edvin26 said:
someone can help me get into this sulution?
Click to expand...
Click to collapse
Hey have you figured this out yet... I'm in sort of same situation I have a Sm-g900t but it's running a G900M stock rom, so I need to know how to keep my bootloader & modem and just flash a stock unbranded rom. I know I can flash custom roms through recovery but I want a stock to fall back on
*GALAXY S5*

edvin26 said:
someone can help me get into this sulution?
Click to expand...
Click to collapse
It's not clear what you hope to do. What you wrote is that you wanted to change you ROM to W8 while retaining your TMobile baseband. And your photo shows that you did just that.
But reading between the lines suggests that you were surprised to see that the baseband hadn't changed and are actually seeking the opposite of what you asked. You need to clarify your intent.
The result that you have is the expected situation. The baseband normally won't change, nor does it represent a problem. Your phone should work fine with the W8 ROM paired with the original baseband.
Aside from the fact that there is usually no need to change the baseband, how easy it is to do so depends on the carrier and how they sign their firmware. Odin won't change the baseband if the carrier decided to omit the requisite permission to do so. TMobile modems are invariably compatible with Canadian (W8) carriers, so pragmaticaly the easiest way to update a 900T modem, if you have a rationale for doing so, is to install a TMobile update. Then put the W8 ROM on top of that if you so wish.
.

Purchased a S5, can you please identify the Model number?

I am very confused, Item is a refurb, has been rooted and therefore i want to put a clean stock rom on it, however i am getting mixed signals. phone is labelled g900f on the sticker and about phone, however i think this is fake, so the seller could sell it as a British model, I went in to recovery, the boot-loader stated it was a g900t. Also in the settings / about / there is a section referring to The united Emirates, which i have not ever seen before. I do believe it is a real s5 though as it has a snapdragon processor. Also the Imei number and serial number match the sticker, however i have a feeling this was somehow done by the seller, or who ever is supplying the seller who sold it to me. Other than that phone is working fine, but does not receive OTA updates. Also for some reason in the Ringtone section there are some built in AT&T ones.
can someone try to make sense of this, and tell me which exact Official ROM i would need to use.
Thanks.

G900T is American T-Mobile version

tigger69 said:
G900T is American T-Mobile version
Click to expand...
Click to collapse
does anyone know why there is a UAE section if this is supposed to be a American phone? also is this a At&t or tmobile original?

Whichever model is says in download mode is the correct model
A lot of models are modded to look like G900Fs as they are one of the most popular models, firmware, stickers etc etc can all be changed, Download mode can't be changed

thanks for the reply. if i reflash to a clean g900t marshmallow, what is the likelyhood it will corrupt the imei , network unlock status or anything like that, also will a g900t rom work fine in the Uk, i read on xda the g900t rom contains alot of branding and junk, can anyone confirm this?
thankyou

kuljit55 said:
thanks for the reply. if i reflash to a clean g900t marshmallow, what is the likelyhood it will corrupt the imei , network unlock status or anything like that, also will a g900t rom work fine in the Uk, i read on xda the g900t rom contains alot of branding and junk, can anyone confirm this?
thankyou
Click to expand...
Click to collapse
Try it, as it seems to be a 900T, i would have to assume it will be ok.

Identifying Yotaphone 2 model (YD206/YD201) using its hardware information

Hello
I ordered a Yotaphone 2 YD201 from china not long ago, and after recieving it I decided to check the phone's details to make sure I'd received the right version.
Unfortunately, I had received a YD206, which won't work well with 4G networks in the UK.
I contacted the seller, and he assured me that the phone I have received is in fact a YD201, stating the following:
"a few yotaphone YD201 was reflashed to YD206 before sending , pls check the phone after delivery . If your phone is YD206 system , don't worry ,it just softwareproblem , the hardware is original YD201 , we can give you reflash rom and tutorial to reflash it back to original YD201 . It will be YD201 system and work with B3/B7/B20 4G net"
My question is; is there a way I can find whether the phone was originally a YD201, or if the version I have been sent is actually just a YD206?
Attached are some screenshots containing my device's info.
Any help would be much appreciated
Thank you
- Luke

Imei = 356... -> yd201
imei = 359... -> yd206

The difference between 206 and 201 are the radio bands supported.
To flash radio only:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
The chinese model is compatible with 1800Mhz LTE band, that is used in some contries in Europe also,
On the phone dialer if you insert *#06# it will show the phone IMEI.
The I.M.E.I. stands for International Mobile Equipment Identity and is specific for each country,
IMEI numbers starting with 359 will be Chinese YD206, if this is your case, then you must flash the Chinese Radio even if you use other location ROM, the correct installed radio will give you better battery life and network speed.
Keep in mind that the Information on Android -> About the phone -> Model: YD201 or YD206 is not accurate because it gets its information from the ROM and not from the hardware.

Thanks for the help

Tippfehler said:
Imei = 356... -> yd201
imei = 359... -> yd206
Click to expand...
Click to collapse
Good! Looks like my phone was originally a YD201 after all, thank you!

Luke25361 said:
Good! Looks like my phone was originally a YD201 after all, thank you!
Click to expand...
Click to collapse
Hi. I'm sitting with the same dilemma... I received the same explanation from Geeks Planet Store, word for word.
I do not even understand why they would even consider re-fashing something with a higher value (YD201) with the software that would make it look like something of lower value (YD206).
Anyway in your screenshot it says Baseband version ..._CN1_M05. Does this mean it uses the CN radio firmware?
I also downloaded their suggested firmware from the link they sent. In that there are no files under the radio folder. Does that mean the radio firmware is supposed to stay unchanged in this case? If so and if baseband _CN1_ means it is currently running CN radio firmware, does this mean the hardware is really YD206?
One more question: how reliable is the imei number check?
To me the best approach seems to be the suggestion by cvzalez to really test the radio with different firmware and see what works.

JJNNTT said:
Hi. I'm sitting with the same dilemma... I received the same explanation from Geeks Planet Store, word for word.
I do not even understand why they would even consider re-fashing something with a higher value (YD201) with the software that would make it look like something of lower value (YD206).
Anyway in your screenshot it says Baseband version ..._CN1_M05. Does this mean it uses the CN radio firmware?
I also downloaded their suggested firmware from the link they sent. In that there are no files under the radio folder. Does that mean the radio firmware is supposed to stay unchanged in this case? If so and if baseband _CN1_ means it is currently running CN radio firmware, does this mean the hardware is really YD206?
One more question: how reliable is the imei number check?
To me the best approach seems to be the suggestion by cvzalez to really test the radio with different firmware and see what works.
Click to expand...
Click to collapse
I'm confused too as to why they would re-flash a YD201 to a YD206. It doesn't make any sense.
According to this guide, the 'S01_003_3034_CN1_M05' baseband that we have is the one used by YD201s that's supposed to work with all available frequency bands. The reason for the radio folder being empty is so that flashing the phone leaves this baseband as it is.
As for the imei number, after a bit of research I've found that changing this number is relatively easy (even without root), so it's possible that Geeks Planet have just changed the imei number to make our phones seem like YD201s. However, it wouldn't make sense for them to do this and to not also flash the firmware to YD201 as well.
Have you tried flashing the phone to the YD201 using the instructions they've given you? I'm wondering whether or not to try this myself.

Luke25361 said:
Have you tried flashing the phone to the YD201 using the instructions they've given you? I'm wondering whether or not to try this myself.
Click to expand...
Click to collapse
I have not received the phone yet. Even though I ordered it a very long time ago, it was only sent after the Chinese new year holiday.
I am seriously considering not accepting the delivery...
---------- Post added at 11:22 AM ---------- Previous post was at 11:16 AM ----------
Luke25361 said:
According to this guide, the 'S01_003_3034_CN1_M05' baseband that we have is the one used by YD201s that's supposed to work with all available frequency bands.
Click to expand...
Click to collapse
I might be wrong or blind, but when I look it says: "YD206 users have to change their modem components to CN version, in order to have all the available bands working. The modem version is written in "About Phone", under "baseband version". You must have the S01_003_3034_CN1_M05 version. "

JJNNTT said:
I have not received the phone yet. Even though I ordered it a very long time ago, it was only sent after the Chinese new year holiday.
I am seriously considering not accepting the delivery...
Click to expand...
Click to collapse
I've asked the supplier if they can give me any assurance that they would help me out should I follow their flashing instructions and the phone be damaged as a result.
If they can give me this assurance, then I'll give it a go and give you the results.
Reading the comments on the youtube video Geeks Planet have sent me, it seems like this problem isn't exclusive to just Geeks Planet and is rather an issue with the main supplier of these YD201s. The comments state that both coolicool and e-fox have sold people phones with the same issue and have been linked to this same video.

JJNNTT said:
I might be wrong or blind, but when I look it says: "YD206 users have to change their modem components to CN version, in order to have all the available bands working. The modem version is written in "About Phone", under "baseband version". You must have the S01_003_3034_CN1_M05 version. "
Click to expand...
Click to collapse
The wording of this section is a little difficult to interpret. It's not really clear if baseband 'S01_003_3034_CN1_M05' is the original baseband or the international baseband.

Luke25361 said:
The wording of this section is a little difficult to interpret. It's not really clear if baseband 'S01_003_3034_CN1_M05' is the original baseband or the international baseband.
Click to expand...
Click to collapse
If I look at:
S01_003_3034_RU1_M11_P2 : 4.4.3-S01-003-APC.0.3.56C ; 4.4.3-S01-003-HK1.0.3.56A ; 4.4.3-S01-003-EU1.0.3.56A; 4.4.3-S01-003-RU1.0.3.56A
S01_003_3034_RU1_M15_P2 : 4.4.3-S01-003-EU1.0.3.61A ; 4.4.3-S01-003-HK1.0.3.61A ; 4.4.3-S01-003-ME1.0.3.61A
S01_003_4240_RU1_M05 : 5.0.0-APC.1.65 ; 5.0.0-RU.1.1.112 ; 5.0.0-HK.1.1.66
S01_003_4240_RU1_M04 : 5.0.0-APC.1.44; 5.0.0-EU.1.1.39 ; 5.0.0.-ME.1.1.45
S01_003_3034_CN1_M05 : in every CN firmware, in the oldest there's the 3032 version.
Click to expand...
Click to collapse
It really looks like _RU1_ is for RU, APC, HK, EU, ME
and
_CN1_ is only for CN
(So YD206 needs _CN1_ ?)

Guys, you're lucky! You've a YD201, it doesn't matter if the firmware inside is from YD206, it can be easily changed looking at the guide you already linked.
The fact that they flashed a firmware for 206 to a 201 is because their phones are suited for Chinese market.
All you have to do is to flash the RU version (including its radio folder) and see that all LTE bands will be working as expected on a YD201!
Changing IMEI is possible, but not simple. And if your IMEI in "About phone" is the same on that written on the package of YotaPhone, you're good to go.
IMEI checking is the most reliable way to understand if it's a YD201 or YD206.

TheArt. said:
Changing IMEI is possible, but not simple. And if your IMEI in "About phone" is the same on that written on the package of YotaPhone, you're good to go.
IMEI checking is the most reliable way to understand if it's a YD201 or YD206.
Click to expand...
Click to collapse
Chinese can easily print a new IMEI on the box

TheArt. said:
Guys, you're lucky! You've a YD201, it doesn't matter if the firmware inside is from YD206, it can be easily changed looking at the guide you already linked.
The fact that they flashed a firmware for 206 to a 201 is because their phones are suited for Chinese market.
All you have to do is to flash the RU version (including its radio folder) and see that all LTE bands will be working as expected on a YD201!
Changing IMEI is possible, but not simple. And if your IMEI in "About phone" is the same on that written on the package of YotaPhone, you're good to go.
IMEI checking is the most reliable way to understand if it's a YD201 or YD206.
Click to expand...
Click to collapse
Thank you for the clarification
I've been sent this reflash rom by the supplier. Would you recommend I use this or use the one on the yota website?

Luke25361 said:
Thank you for the clarification
I've been sent this reflash rom by the supplier. Would you recommend I use this or use the one on the yota website?
Click to expand...
Click to collapse
The one on Yota ftp site are official. I don't know if the firmware the seller sent to you is modified or they just downloaded it via ftp, repacked and sent to you. The firmware version is invisible looking at the files, first you have to flash it and them you will see which version it is.
Personally I would flash only official firmwares.

TheArt. said:
The one on Yota ftp site are official. I don't know if the firmware the seller sent to you is modified or they just downloaded it via ftp, repacked and sent to you. The firmware version is invisible looking at the files, first you have to flash it and them you will see which version it is.
Personally I would flash only official firmwares.
Click to expand...
Click to collapse
Ok, I've decided to try and flash using one of the official firmwares.
If I were to flash to one of the RU firmwares, which one of them would I need to use?

Luke25361 said:
Ok, I've decided to try and flash using one of the official firmwares.
If I were to flash to one of the RU firmwares, which one of them would I need to use?
Click to expand...
Click to collapse
In this guide this information is already written down, anyway use the latest which is: 5.0.0-RU1.1.124.zip.
Let us know which version of firmware and baseband is the ROM the seller provided you!

Luke25361 said:
Ok, I've decided to try and flash using one of the official firmwares.
Click to expand...
Click to collapse
Did it work? Could you test the LTE capabilities with the RU base band?

TheArt. said:
In this guide this information is already written down, anyway use the latest which is: 5.0.0-RU1.1.124.zip.
Let us know which version of firmware and baseband is the ROM the seller provided you!
Click to expand...
Click to collapse
JJNNTT said:
Did it work? Could you test the LTE capabilities with the RU base band?
Click to expand...
Click to collapse
I've managed to flash the phone using the firmware the seller provided. I have also managed to install an OTA update.
I've attached a screenshot with the new device details.
Is this the correct version that I should be on now?

Luke25361 said:
I've managed to flash the phone using the firmware the seller provided. I have also managed to install an OTA update.
I've attached a screenshot with the new device details.
Click to expand...
Click to collapse
At least the baseband changed... which I guess is a good sign. For me now the big question is: Does LTE B20 work? (That is what I need where I live.)